arch/mips/kernel/smp-bmips.c - third_party/linux - Git at Google

 /*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com)
  *
  * SMP support for BMIPS
  */

 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
 #include <linux/io.h>
 #include <linux/compiler.h>
 #include <linux/linkage.h>
 #include <linux/bug.h>
 #include <linux/kernel.h>

 #include <asm/time.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/bootinfo.h>
 #include <asm/pmon.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/mipsregs.h>
 #include <asm/bmips.h>
 #include <asm/traps.h>
 #include <asm/barrier.h>
 #include <asm/cpu-features.h>

 static int __maybe_unused max_cpus = 1;

 /* these may be configured by the platform code */
 int bmips_smp_enabled = 1;
 int bmips_cpu_offset;
 cpumask_t bmips_booted_mask;
 unsigned long bmips_tp1_irqs = IE_IRQ1;

 #define RESET_FROM_KSEG0		0x80080800
 #define RESET_FROM_KSEG1		0xa0080800

 static void bmips_set_reset_vec(int cpu, u32 val);

 #ifdef CONFIG_SMP

 /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
 unsigned long bmips_smp_boot_sp;
 unsigned long bmips_smp_boot_gp;

 static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
 static void bmips5000_send_ipi_single(int cpu, unsigned int action);
 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);

 /* SW interrupts 0,1 are used for interprocessor signaling */
 #define IPI0_IRQ			(MIPS_CPU_IRQ_BASE + 0)
 #define IPI1_IRQ			(MIPS_CPU_IRQ_BASE + 1)

 #define CPUNUM(cpu, shift)		(((cpu) + bmips_cpu_offset) << (shift))
 #define ACTION_CLR_IPI(cpu, ipi)	(0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8))
 #define ACTION_SET_IPI(cpu, ipi)	(0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8))
 #define ACTION_BOOT_THREAD(cpu)		(0x08 | CPUNUM(cpu, 0))

 static void __init bmips_smp_setup(void)
 {
 	int i, cpu = 1, boot_cpu = 0;
 	int cpu_hw_intr;

 	switch (current_cpu_type()) {
 	case CPU_BMIPS4350:
 	case CPU_BMIPS4380:
 		/* arbitration priority */
 		clear_c0_brcm_cmt_ctrl(0x30);

 		/* NBK and weak order flags */
 		set_c0_brcm_config_0(0x30000);

 		/* Find out if we are running on TP0 or TP1 */
 		boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));

 		/*
 		 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
 		 * thread
 		 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
 		 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
 		 */
 		if (boot_cpu == 0)
 			cpu_hw_intr = 0x02;
 		else
 			cpu_hw_intr = 0x1d;

 		change_c0_brcm_cmt_intr(0xf8018000,
 					(cpu_hw_intr << 27) | (0x03 << 15));

 		/* single core, 2 threads (2 pipelines) */
 		max_cpus = 2;

 		break;
 	case CPU_BMIPS5000:
 		/* enable raceless SW interrupts */
 		set_c0_brcm_config(0x03 << 22);

 		/* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
 		change_c0_brcm_mode(0x1f << 27, 0x02 << 27);

 		/* N cores, 2 threads per core */
 		max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;

 		/* clear any pending SW interrupts */
 		for (i = 0; i < max_cpus; i++) {
 			write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
 			write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
 		}

 		break;
 	default:
 		max_cpus = 1;
 	}

 	if (!bmips_smp_enabled)
 		max_cpus = 1;

 	/* this can be overridden by the BSP */
 	if (!board_ebase_setup)
 		board_ebase_setup = &bmips_ebase_setup;

 	__cpu_number_map[boot_cpu] = 0;
 	__cpu_logical_map[0] = boot_cpu;

 	for (i = 0; i < max_cpus; i++) {
 		if (i != boot_cpu) {
 			__cpu_number_map[i] = cpu;
 			__cpu_logical_map[cpu] = i;
 			cpu++;
 		}
 		set_cpu_possible(i, 1);
 		set_cpu_present(i, 1);
 	}
 }

 /*
  * IPI IRQ setup - runs on CPU0
  */
 static void bmips_prepare_cpus(unsigned int max_cpus)
 {
 	irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);

 	switch (current_cpu_type()) {
 	case CPU_BMIPS4350:
 	case CPU_BMIPS4380:
 		bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
 		break;
 	case CPU_BMIPS5000:
 		bmips_ipi_interrupt = bmips5000_ipi_interrupt;
 		break;
 	default:
 		return;
 	}

 	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
 			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
 		panic("Can't request IPI0 interrupt");
 	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
 			IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
 		panic("Can't request IPI1 interrupt");
 }

 /*
  * Tell the hardware to boot CPUx - runs on CPU0
  */
 static void bmips_boot_secondary(int cpu, struct task_struct *idle)
 {
 	bmips_smp_boot_sp = __KSTK_TOS(idle);
 	bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
 	mb();

 	/*
 	 * Initial boot sequence for secondary CPU:
 	 *   bmips_reset_nmi_vec @ a000_0000 ->
 	 *   bmips_smp_entry ->
 	 *   plat_wired_tlb_setup (cached function call; optional) ->
 	 *   start_secondary (cached jump)
 	 *
 	 * Warm restart sequence:
 	 *   play_dead WAIT loop ->
 	 *   bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
 	 *   eret to play_dead ->
 	 *   bmips_secondary_reentry ->
 	 *   start_secondary
 	 */

 	pr_info("SMP: Booting CPU%d...\n", cpu);

 	if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
 		/* kseg1 might not exist if this CPU enabled XKS01 */
 		bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);

 		switch (current_cpu_type()) {
 		case CPU_BMIPS4350:
 		case CPU_BMIPS4380:
 			bmips43xx_send_ipi_single(cpu, 0);
 			break;
 		case CPU_BMIPS5000:
 			bmips5000_send_ipi_single(cpu, 0);
 			break;
 		}
 	} else {
 		bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);

 		switch (current_cpu_type()) {
 		case CPU_BMIPS4350:
 		case CPU_BMIPS4380:
 			/* Reset slave TP1 if booting from TP0 */
 			if (cpu_logical_map(cpu) == 1)
 				set_c0_brcm_cmt_ctrl(0x01);
 			break;
 		case CPU_BMIPS5000:
 			write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
 			break;
 		}
 		cpumask_set_cpu(cpu, &bmips_booted_mask);
 	}
 }

 /*
  * Early setup - runs on secondary CPU after cache probe
  */
 static void bmips_init_secondary(void)
 {
 	bmips_cpu_setup();

 	switch (current_cpu_type()) {
 	case CPU_BMIPS4350:
 	case CPU_BMIPS4380:
 		clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
 		break;
 	case CPU_BMIPS5000:
 		write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
 		current_cpu_data.core = (read_c0_brcm_config() >> 25) & 3;
 		break;
 	}
 }

 /*
  * Late setup - runs on secondary CPU before entering the idle loop
  */
 static void bmips_smp_finish(void)
 {
 	pr_info("SMP: CPU%d is running\n", smp_processor_id());

 	/* make sure there won't be a timer interrupt for a little while */
 	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);

 	irq_enable_hazard();
 	set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE);
 	irq_enable_hazard();
 }

 /*
  * BMIPS5000 raceless IPIs
  *
  * Each CPU has two inbound SW IRQs which are independent of all other CPUs.
  * IPI0 is used for SMP_RESCHEDULE_YOURSELF
  * IPI1 is used for SMP_CALL_FUNCTION
  */

 static void bmips5000_send_ipi_single(int cpu, unsigned int action)
 {
 	write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
 }

 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
 {
 	int action = irq - IPI0_IRQ;

 	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));

 	if (action == 0)
 		scheduler_ipi();
 	else
 		generic_smp_call_function_interrupt();

 	return IRQ_HANDLED;
 }

 static void bmips5000_send_ipi_mask(const struct cpumask *mask,
 	unsigned int action)
 {
 	unsigned int i;

 	for_each_cpu(i, mask)
 		bmips5000_send_ipi_single(i, action);
 }

 /*
  * BMIPS43xx racey IPIs
  *
  * We use one inbound SW IRQ for each CPU.
  *
  * A spinlock must be held in order to keep CPUx from accidentally clearing
  * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy.  The
  * same spinlock is used to protect the action masks.
  */

 static DEFINE_SPINLOCK(ipi_lock);
 static DEFINE_PER_CPU(int, ipi_action_mask);

 static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
 {
 	unsigned long flags;

 	spin_lock_irqsave(&ipi_lock, flags);
 	set_c0_cause(cpu ? C_SW1 : C_SW0);
 	per_cpu(ipi_action_mask, cpu) |= action;
 	irq_enable_hazard();
 	spin_unlock_irqrestore(&ipi_lock, flags);
 }

 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
 {
 	unsigned long flags;
 	int action, cpu = irq - IPI0_IRQ;

 	spin_lock_irqsave(&ipi_lock, flags);
 	action = __this_cpu_read(ipi_action_mask);
 	per_cpu(ipi_action_mask, cpu) = 0;
 	clear_c0_cause(cpu ? C_SW1 : C_SW0);
 	spin_unlock_irqrestore(&ipi_lock, flags);

 	if (action & SMP_RESCHEDULE_YOURSELF)
 		scheduler_ipi();
 	if (action & SMP_CALL_FUNCTION)
 		generic_smp_call_function_interrupt();

 	return IRQ_HANDLED;
 }

 static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
 	unsigned int action)
 {
 	unsigned int i;

 	for_each_cpu(i, mask)
 		bmips43xx_send_ipi_single(i, action);
 }

 #ifdef CONFIG_HOTPLUG_CPU

 static int bmips_cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();

 	if (cpu == 0)
 		return -EBUSY;

 	pr_info("SMP: CPU%d is offline\n", cpu);

 	set_cpu_online(cpu, false);
 	calculate_cpu_foreign_map();
 	cpumask_clear_cpu(cpu, &cpu_callin_map);
 	clear_c0_status(IE_IRQ5);

 	local_flush_tlb_all();
 	local_flush_icache_range(0, ~0);

 	return 0;
 }

 static void bmips_cpu_die(unsigned int cpu)
 {
 }

 void __ref play_dead(void)
 {
 	idle_task_exit();

 	/* flush data cache */
 	_dma_cache_wback_inv(0, ~0);

 	/*
 	 * Wakeup is on SW0 or SW1; disable everything else
 	 * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
 	 * IRQ handlers; this clears ST0_IE and returns immediately.
 	 */
 	clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
 	change_c0_status(
 		IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
 		IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
 	irq_disable_hazard();

 	/*
 	 * wait for SW interrupt from bmips_boot_secondary(), then jump
 	 * back to start_secondary()
 	 */
 	__asm__ __volatile__(
 	"	wait\n"
 	"	j	bmips_secondary_reentry\n"
 	: : : "memory");
 }

 #endif /* CONFIG_HOTPLUG_CPU */

 struct plat_smp_ops bmips43xx_smp_ops = {
 	.smp_setup		= bmips_smp_setup,
 	.prepare_cpus		= bmips_prepare_cpus,
 	.boot_secondary		= bmips_boot_secondary,
 	.smp_finish		= bmips_smp_finish,
 	.init_secondary		= bmips_init_secondary,
 	.send_ipi_single	= bmips43xx_send_ipi_single,
 	.send_ipi_mask		= bmips43xx_send_ipi_mask,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= bmips_cpu_disable,
 	.cpu_die		= bmips_cpu_die,
 #endif
 };

 struct plat_smp_ops bmips5000_smp_ops = {
 	.smp_setup		= bmips_smp_setup,
 	.prepare_cpus		= bmips_prepare_cpus,
 	.boot_secondary		= bmips_boot_secondary,
 	.smp_finish		= bmips_smp_finish,
 	.init_secondary		= bmips_init_secondary,
 	.send_ipi_single	= bmips5000_send_ipi_single,
 	.send_ipi_mask		= bmips5000_send_ipi_mask,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= bmips_cpu_disable,
 	.cpu_die		= bmips_cpu_die,
 #endif
 };

 #endif /* CONFIG_SMP */

 /***********************************************************************
  * BMIPS vector relocation
  * This is primarily used for SMP boot, but it is applicable to some
  * UP BMIPS systems as well.
  ***********************************************************************/

 static void bmips_wr_vec(unsigned long dst, char *start, char *end)
 {
 	memcpy((void *)dst, start, end - start);
 	dma_cache_wback(dst, end - start);
 	local_flush_icache_range(dst, dst + (end - start));
 	instruction_hazard();
 }

 static inline void bmips_nmi_handler_setup(void)
 {
 	bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec,
 		bmips_reset_nmi_vec_end);
 	bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec,
 		bmips_smp_int_vec_end);
 }

 struct reset_vec_info {
 	int cpu;
 	u32 val;
 };

 static void bmips_set_reset_vec_remote(void *vinfo)
 {
 	struct reset_vec_info *info = vinfo;
 	int shift = info->cpu & 0x01 ? 16 : 0;
 	u32 mask = ~(0xffff << shift), val = info->val >> 16;

 	preempt_disable();
 	if (smp_processor_id() > 0) {
 		smp_call_function_single(0, &bmips_set_reset_vec_remote,
 					 info, 1);
 	} else {
 		if (info->cpu & 0x02) {
 			/* BMIPS5200 "should" use mask/shift, but it's buggy */
 			bmips_write_zscm_reg(0xa0, (val << 16) | val);
 			bmips_read_zscm_reg(0xa0);
 		} else {
 			write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) |
 					      (val << shift));
 		}
 	}
 	preempt_enable();
 }

 static void bmips_set_reset_vec(int cpu, u32 val)
 {
 	struct reset_vec_info info;

 	if (current_cpu_type() == CPU_BMIPS5000) {
 		/* this needs to run from CPU0 (which is always online) */
 		info.cpu = cpu;
 		info.val = val;
 		bmips_set_reset_vec_remote(&info);
 	} else {
 		void __iomem *cbr = BMIPS_GET_CBR();

 		if (cpu == 0)
 			__raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
 		else {
 			if (current_cpu_type() != CPU_BMIPS4380)
 				return;
 			__raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
 		}
 	}
 	__sync();
 	back_to_back_c0_hazard();
 }

 void bmips_ebase_setup(void)
 {
 	unsigned long new_ebase = ebase;

 	BUG_ON(ebase != CKSEG0);

 	switch (current_cpu_type()) {
 	case CPU_BMIPS4350:
 		/*
 		 * BMIPS4350 cannot relocate the normal vectors, but it
 		 * can relocate the BEV=1 vectors.  So CPU1 starts up at
 		 * the relocated BEV=1, IV=0 general exception vector @
 		 * 0xa000_0380.
 		 *
 		 * set_uncached_handler() is used here because:
 		 *  - CPU1 will run this from uncached space
 		 *  - None of the cacheflush functions are set up yet
 		 */
 		set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
 			&bmips_smp_int_vec, 0x80);
 		__sync();
 		return;
 	case CPU_BMIPS3300:
 	case CPU_BMIPS4380:
 		/*
 		 * 0x8000_0000: reset/NMI (initially in kseg1)
 		 * 0x8000_0400: normal vectors
 		 */
 		new_ebase = 0x80000400;
 		bmips_set_reset_vec(0, RESET_FROM_KSEG0);
 		break;
 	case CPU_BMIPS5000:
 		/*
 		 * 0x8000_0000: reset/NMI (initially in kseg1)
 		 * 0x8000_1000: normal vectors
 		 */
 		new_ebase = 0x80001000;
 		bmips_set_reset_vec(0, RESET_FROM_KSEG0);
 		write_c0_ebase(new_ebase);
 		break;
 	default:
 		return;
 	}

 	board_nmi_handler_setup = &bmips_nmi_handler_setup;
 	ebase = new_ebase;
 }

 asmlinkage void __weak plat_wired_tlb_setup(void)
 {
 	/*
 	 * Called when starting/restarting a secondary CPU.
 	 * Kernel stacks and other important data might only be accessible
 	 * once the wired entries are present.
 	 */
 }

 void __init bmips_cpu_setup(void)
 {
 	void __iomem __maybe_unused *cbr = BMIPS_GET_CBR();
 	u32 __maybe_unused cfg;

 	switch (current_cpu_type()) {
 	case CPU_BMIPS3300:
 		/* Set BIU to async mode */
 		set_c0_brcm_bus_pll(BIT(22));
 		__sync();

 		/* put the BIU back in sync mode */
 		clear_c0_brcm_bus_pll(BIT(22));

 		/* clear BHTD to enable branch history table */
 		clear_c0_brcm_reset(BIT(16));

 		/* Flush and enable RAC */
 		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 		__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
 		__raw_readl(cbr + BMIPS_RAC_CONFIG);

 		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 		__raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG);
 		__raw_readl(cbr + BMIPS_RAC_CONFIG);

 		cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 		__raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
 		__raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 		break;

 	case CPU_BMIPS4380:
 		/* CBG workaround for early BMIPS4380 CPUs */
 		switch (read_c0_prid()) {
 		case 0x2a040:
 		case 0x2a042:
 		case 0x2a044:
 		case 0x2a060:
 			cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
 			__raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
 			__raw_readl(cbr + BMIPS_L2_CONFIG);
 		}

 		/* clear BHTD to enable branch history table */
 		clear_c0_brcm_config_0(BIT(21));

 		/* XI/ROTR enable */
 		set_c0_brcm_config_0(BIT(23));
 		set_c0_brcm_cmt_ctrl(BIT(15));
 		break;

 	case CPU_BMIPS5000:
 		/* enable RDHWR, BRDHWR */
 		set_c0_brcm_config(BIT(17) | BIT(21));

 		/* Disable JTB */
 		__asm__ __volatile__(
 		"	.set	noreorder\n"
 		"	li	$8, 0x5a455048\n"
 		"	.word	0x4088b00f\n"	/* mtc0	t0, $22, 15 */
 		"	.word	0x4008b008\n"	/* mfc0	t0, $22, 8 */
 		"	li	$9, 0x00008000\n"
 		"	or	$8, $8, $9\n"
 		"	.word	0x4088b008\n"	/* mtc0	t0, $22, 8 */
 		"	sync\n"
 		"	li	$8, 0x0\n"
 		"	.word	0x4088b00f\n"	/* mtc0	t0, $22, 15 */
 		"	.set	reorder\n"
 		: : : "$8", "$9");

 		/* XI enable */
 		set_c0_brcm_config(BIT(27));

 		/* enable MIPS32R2 ROR instruction for XI TLB handlers */
 		__asm__ __volatile__(
 		"	li	$8, 0x5a455048\n"
 		"	.word	0x4088b00f\n"	/* mtc0 $8, $22, 15 */
 		"	nop; nop; nop\n"
 		"	.word	0x4008b008\n"	/* mfc0 $8, $22, 8 */
 		"	lui	$9, 0x0100\n"
 		"	or	$8, $9\n"
 		"	.word	0x4088b008\n"	/* mtc0 $8, $22, 8 */
 		: : : "$8", "$9");
 		break;
 	}
 }
	/*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com)
	*
	* SMP support for BMIPS
	*/

	#include <linux/init.h>
	#include <linux/sched.h>
	#include <linux/mm.h>
	#include <linux/delay.h>
	#include <linux/smp.h>
	#include <linux/interrupt.h>
	#include <linux/spinlock.h>
	#include <linux/cpu.h>
	#include <linux/cpumask.h>
	#include <linux/reboot.h>
	#include <linux/io.h>
	#include <linux/compiler.h>
	#include <linux/linkage.h>
	#include <linux/bug.h>
	#include <linux/kernel.h>

	#include <asm/time.h>
	#include <asm/pgtable.h>
	#include <asm/processor.h>
	#include <asm/bootinfo.h>
	#include <asm/pmon.h>
	#include <asm/cacheflush.h>
	#include <asm/tlbflush.h>
	#include <asm/mipsregs.h>
	#include <asm/bmips.h>
	#include <asm/traps.h>
	#include <asm/barrier.h>
	#include <asm/cpu-features.h>

	static int __maybe_unused max_cpus = 1;

	/* these may be configured by the platform code */
	int bmips_smp_enabled = 1;
	int bmips_cpu_offset;
	cpumask_t bmips_booted_mask;
	unsigned long bmips_tp1_irqs = IE_IRQ1;

	#define RESET_FROM_KSEG0 0x80080800
	#define RESET_FROM_KSEG1 0xa0080800

	static void bmips_set_reset_vec(int cpu, u32 val);

	#ifdef CONFIG_SMP

	/* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
	unsigned long bmips_smp_boot_sp;
	unsigned long bmips_smp_boot_gp;

	static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
	static void bmips5000_send_ipi_single(int cpu, unsigned int action);
	static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
	static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);

	/* SW interrupts 0,1 are used for interprocessor signaling */
	#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0)
	#define IPI1_IRQ (MIPS_CPU_IRQ_BASE + 1)

	#define CPUNUM(cpu, shift) (((cpu) + bmips_cpu_offset) << (shift))
	#define ACTION_CLR_IPI(cpu, ipi) (0x2000 \| CPUNUM(cpu, 9) \| ((ipi) << 8))
	#define ACTION_SET_IPI(cpu, ipi) (0x3000 \| CPUNUM(cpu, 9) \| ((ipi) << 8))
	#define ACTION_BOOT_THREAD(cpu) (0x08 \| CPUNUM(cpu, 0))

	static void __init bmips_smp_setup(void)
	{
	int i, cpu = 1, boot_cpu = 0;
	int cpu_hw_intr;

	switch (current_cpu_type()) {
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	/* arbitration priority */
	clear_c0_brcm_cmt_ctrl(0x30);

	/* NBK and weak order flags */
	set_c0_brcm_config_0(0x30000);

	/* Find out if we are running on TP0 or TP1 */
	boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));

	/*
	* MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
	* thread
	* MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
	* MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
	*/
	if (boot_cpu == 0)
	cpu_hw_intr = 0x02;
	else
	cpu_hw_intr = 0x1d;

	change_c0_brcm_cmt_intr(0xf8018000,
	(cpu_hw_intr << 27) \| (0x03 << 15));

	/* single core, 2 threads (2 pipelines) */
	max_cpus = 2;

	break;
	case CPU_BMIPS5000:
	/* enable raceless SW interrupts */
	set_c0_brcm_config(0x03 << 22);

	/* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
	change_c0_brcm_mode(0x1f << 27, 0x02 << 27);

	/* N cores, 2 threads per core */
	max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;

	/* clear any pending SW interrupts */
	for (i = 0; i < max_cpus; i++) {
	write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
	write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
	}

	break;
	default:
	max_cpus = 1;
	}

	if (!bmips_smp_enabled)
	max_cpus = 1;

	/* this can be overridden by the BSP */
	if (!board_ebase_setup)
	board_ebase_setup = &bmips_ebase_setup;

	__cpu_number_map[boot_cpu] = 0;
	__cpu_logical_map[0] = boot_cpu;

	for (i = 0; i < max_cpus; i++) {
	if (i != boot_cpu) {
	__cpu_number_map[i] = cpu;
	__cpu_logical_map[cpu] = i;
	cpu++;
	}
	set_cpu_possible(i, 1);
	set_cpu_present(i, 1);
	}
	}

	/*
	* IPI IRQ setup - runs on CPU0
	*/
	static void bmips_prepare_cpus(unsigned int max_cpus)
	{
	irqreturn_t (bmips_ipi_interrupt)(int irq, void dev_id);

	switch (current_cpu_type()) {
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
	break;
	case CPU_BMIPS5000:
	bmips_ipi_interrupt = bmips5000_ipi_interrupt;
	break;
	default:
	return;
	}

	if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
	IRQF_PERCPU \| IRQF_NO_SUSPEND, "smp_ipi0", NULL))
	panic("Can't request IPI0 interrupt");
	if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
	IRQF_PERCPU \| IRQF_NO_SUSPEND, "smp_ipi1", NULL))
	panic("Can't request IPI1 interrupt");
	}

	/*
	* Tell the hardware to boot CPUx - runs on CPU0
	*/
	static void bmips_boot_secondary(int cpu, struct task_struct *idle)
	{
	bmips_smp_boot_sp = __KSTK_TOS(idle);
	bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
	mb();

	/*
	* Initial boot sequence for secondary CPU:
	* bmips_reset_nmi_vec @ a000_0000 ->
	* bmips_smp_entry ->
	* plat_wired_tlb_setup (cached function call; optional) ->
	* start_secondary (cached jump)
	*
	* Warm restart sequence:
	* play_dead WAIT loop ->
	* bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
	* eret to play_dead ->
	* bmips_secondary_reentry ->
	* start_secondary
	*/

	pr_info("SMP: Booting CPU%d...\n", cpu);

	if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
	/* kseg1 might not exist if this CPU enabled XKS01 */
	bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);

	switch (current_cpu_type()) {
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	bmips43xx_send_ipi_single(cpu, 0);
	break;
	case CPU_BMIPS5000:
	bmips5000_send_ipi_single(cpu, 0);
	break;
	}
	} else {
	bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);

	switch (current_cpu_type()) {
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	/* Reset slave TP1 if booting from TP0 */
	if (cpu_logical_map(cpu) == 1)
	set_c0_brcm_cmt_ctrl(0x01);
	break;
	case CPU_BMIPS5000:
	write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
	break;
	}
	cpumask_set_cpu(cpu, &bmips_booted_mask);
	}
	}

	/*
	* Early setup - runs on secondary CPU after cache probe
	*/
	static void bmips_init_secondary(void)
	{
	bmips_cpu_setup();

	switch (current_cpu_type()) {
	case CPU_BMIPS4350:
	case CPU_BMIPS4380:
	clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
	break;
	case CPU_BMIPS5000:
	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
	current_cpu_data.core = (read_c0_brcm_config() >> 25) & 3;
	break;
	}
	}

	/*
	* Late setup - runs on secondary CPU before entering the idle loop
	*/
	static void bmips_smp_finish(void)
	{
	pr_info("SMP: CPU%d is running\n", smp_processor_id());

	/* make sure there won't be a timer interrupt for a little while */
	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);

	irq_enable_hazard();
	set_c0_status(IE_SW0 \| IE_SW1 \| bmips_tp1_irqs \| IE_IRQ5 \| ST0_IE);
	irq_enable_hazard();
	}

	/*
	* BMIPS5000 raceless IPIs
	*
	* Each CPU has two inbound SW IRQs which are independent of all other CPUs.
	* IPI0 is used for SMP_RESCHEDULE_YOURSELF
	* IPI1 is used for SMP_CALL_FUNCTION
	*/

	static void bmips5000_send_ipi_single(int cpu, unsigned int action)
	{
	write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
	}

	static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
	{
	int action = irq - IPI0_IRQ;

	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));

	if (action == 0)
	scheduler_ipi();
	else
	generic_smp_call_function_interrupt();

	return IRQ_HANDLED;
	}

	static void bmips5000_send_ipi_mask(const struct cpumask *mask,
	unsigned int action)
	{
	unsigned int i;

	for_each_cpu(i, mask)
	bmips5000_send_ipi_single(i, action);
	}

	/*
	* BMIPS43xx racey IPIs
	*
	* We use one inbound SW IRQ for each CPU.
	*
	* A spinlock must be held in order to keep CPUx from accidentally clearing
	* an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy. The
	* same spinlock is used to protect the action masks.
	*/

	static DEFINE_SPINLOCK(ipi_lock);
	static DEFINE_PER_CPU(int, ipi_action_mask);

	static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
	{
	unsigned long flags;

	spin_lock_irqsave(&ipi_lock, flags);
	set_c0_cause(cpu ? C_SW1 : C_SW0);
	per_cpu(ipi_action_mask, cpu) \|= action;
	irq_enable_hazard();
	spin_unlock_irqrestore(&ipi_lock, flags);
	}

	static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
	{
	unsigned long flags;
	int action, cpu = irq - IPI0_IRQ;

	spin_lock_irqsave(&ipi_lock, flags);
	action = __this_cpu_read(ipi_action_mask);
	per_cpu(ipi_action_mask, cpu) = 0;
	clear_c0_cause(cpu ? C_SW1 : C_SW0);
	spin_unlock_irqrestore(&ipi_lock, flags);

	if (action & SMP_RESCHEDULE_YOURSELF)
	scheduler_ipi();
	if (action & SMP_CALL_FUNCTION)
	generic_smp_call_function_interrupt();

	return IRQ_HANDLED;
	}

	static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
	unsigned int action)
	{
	unsigned int i;

	for_each_cpu(i, mask)
	bmips43xx_send_ipi_single(i, action);
	}

	#ifdef CONFIG_HOTPLUG_CPU

	static int bmips_cpu_disable(void)
	{
	unsigned int cpu = smp_processor_id();

	if (cpu == 0)
	return -EBUSY;

	pr_info("SMP: CPU%d is offline\n", cpu);

	set_cpu_online(cpu, false);
	calculate_cpu_foreign_map();
	cpumask_clear_cpu(cpu, &cpu_callin_map);
	clear_c0_status(IE_IRQ5);

	local_flush_tlb_all();
	local_flush_icache_range(0, ~0);

	return 0;
	}

	static void bmips_cpu_die(unsigned int cpu)
	{
	}

	void __ref play_dead(void)
	{
	idle_task_exit();

	/* flush data cache */
	_dma_cache_wback_inv(0, ~0);

	/*
	* Wakeup is on SW0 or SW1; disable everything else
	* Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
	* IRQ handlers; this clears ST0_IE and returns immediately.
	*/
	clear_c0_cause(CAUSEF_IV \| C_SW0 \| C_SW1);
	change_c0_status(
	IE_IRQ5 \| bmips_tp1_irqs \| IE_SW0 \| IE_SW1 \| ST0_IE \| ST0_BEV,
	IE_SW0 \| IE_SW1 \| ST0_IE \| ST0_BEV);
	irq_disable_hazard();

	/*
	* wait for SW interrupt from bmips_boot_secondary(), then jump
	* back to start_secondary()
	*/
	__asm__ __volatile__(
	" wait\n"
	" j bmips_secondary_reentry\n"
	: : : "memory");
	}

	#endif /* CONFIG_HOTPLUG_CPU */

	struct plat_smp_ops bmips43xx_smp_ops = {
	.smp_setup = bmips_smp_setup,
	.prepare_cpus = bmips_prepare_cpus,
	.boot_secondary = bmips_boot_secondary,
	.smp_finish = bmips_smp_finish,
	.init_secondary = bmips_init_secondary,
	.send_ipi_single = bmips43xx_send_ipi_single,
	.send_ipi_mask = bmips43xx_send_ipi_mask,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_disable = bmips_cpu_disable,
	.cpu_die = bmips_cpu_die,
	#endif
	};

	struct plat_smp_ops bmips5000_smp_ops = {
	.smp_setup = bmips_smp_setup,
	.prepare_cpus = bmips_prepare_cpus,
	.boot_secondary = bmips_boot_secondary,
	.smp_finish = bmips_smp_finish,
	.init_secondary = bmips_init_secondary,
	.send_ipi_single = bmips5000_send_ipi_single,
	.send_ipi_mask = bmips5000_send_ipi_mask,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_disable = bmips_cpu_disable,
	.cpu_die = bmips_cpu_die,
	#endif
	};

	#endif /* CONFIG_SMP */

	/***********************************************************************
	* BMIPS vector relocation
	* This is primarily used for SMP boot, but it is applicable to some
	* UP BMIPS systems as well.
	***********************************************************************/

	static void bmips_wr_vec(unsigned long dst, char start, char end)
	{
	memcpy((void *)dst, start, end - start);
	dma_cache_wback(dst, end - start);
	local_flush_icache_range(dst, dst + (end - start));
	instruction_hazard();
	}

	static inline void bmips_nmi_handler_setup(void)
	{
	bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec,
	bmips_reset_nmi_vec_end);
	bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec,
	bmips_smp_int_vec_end);
	}

	struct reset_vec_info {
	int cpu;
	u32 val;
	};

	static void bmips_set_reset_vec_remote(void *vinfo)
	{
	struct reset_vec_info *info = vinfo;
	int shift = info->cpu & 0x01 ? 16 : 0;
	u32 mask = ~(0xffff << shift), val = info->val >> 16;

	preempt_disable();
	if (smp_processor_id() > 0) {
	smp_call_function_single(0, &bmips_set_reset_vec_remote,
	info, 1);
	} else {
	if (info->cpu & 0x02) {
	/* BMIPS5200 "should" use mask/shift, but it's buggy */
	bmips_write_zscm_reg(0xa0, (val << 16) \| val);
	bmips_read_zscm_reg(0xa0);
	} else {
	write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) \|
	(val << shift));
	}
	}
	preempt_enable();
	}

	static void bmips_set_reset_vec(int cpu, u32 val)
	{
	struct reset_vec_info info;

	if (current_cpu_type() == CPU_BMIPS5000) {
	/* this needs to run from CPU0 (which is always online) */
	info.cpu = cpu;
	info.val = val;
	bmips_set_reset_vec_remote(&info);
	} else {
	void __iomem *cbr = BMIPS_GET_CBR();

	if (cpu == 0)
	__raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
	else {
	if (current_cpu_type() != CPU_BMIPS4380)
	return;
	__raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
	}
	}
	__sync();
	back_to_back_c0_hazard();
	}

	void bmips_ebase_setup(void)
	{
	unsigned long new_ebase = ebase;

	BUG_ON(ebase != CKSEG0);

	switch (current_cpu_type()) {
	case CPU_BMIPS4350:
	/*
	* BMIPS4350 cannot relocate the normal vectors, but it
	* can relocate the BEV=1 vectors. So CPU1 starts up at
	* the relocated BEV=1, IV=0 general exception vector @
	* 0xa000_0380.
	*
	* set_uncached_handler() is used here because:
	* - CPU1 will run this from uncached space
	* - None of the cacheflush functions are set up yet
	*/
	set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
	&bmips_smp_int_vec, 0x80);
	__sync();
	return;
	case CPU_BMIPS3300:
	case CPU_BMIPS4380:
	/*
	* 0x8000_0000: reset/NMI (initially in kseg1)
	* 0x8000_0400: normal vectors
	*/
	new_ebase = 0x80000400;
	bmips_set_reset_vec(0, RESET_FROM_KSEG0);
	break;
	case CPU_BMIPS5000:
	/*
	* 0x8000_0000: reset/NMI (initially in kseg1)
	* 0x8000_1000: normal vectors
	*/
	new_ebase = 0x80001000;
	bmips_set_reset_vec(0, RESET_FROM_KSEG0);
	write_c0_ebase(new_ebase);
	break;
	default:
	return;
	}

	board_nmi_handler_setup = &bmips_nmi_handler_setup;
	ebase = new_ebase;
	}

	asmlinkage void __weak plat_wired_tlb_setup(void)
	{
	/*
	* Called when starting/restarting a secondary CPU.
	* Kernel stacks and other important data might only be accessible
	* once the wired entries are present.
	*/
	}

	void __init bmips_cpu_setup(void)
	{
	void __iomem __maybe_unused *cbr = BMIPS_GET_CBR();
	u32 __maybe_unused cfg;

	switch (current_cpu_type()) {
	case CPU_BMIPS3300:
	/* Set BIU to async mode */
	set_c0_brcm_bus_pll(BIT(22));
	__sync();

	/* put the BIU back in sync mode */
	clear_c0_brcm_bus_pll(BIT(22));

	/* clear BHTD to enable branch history table */
	clear_c0_brcm_reset(BIT(16));

	/* Flush and enable RAC */
	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
	__raw_writel(cfg \| 0x100, cbr + BMIPS_RAC_CONFIG);
	__raw_readl(cbr + BMIPS_RAC_CONFIG);

	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
	__raw_writel(cfg \| 0xf, cbr + BMIPS_RAC_CONFIG);
	__raw_readl(cbr + BMIPS_RAC_CONFIG);

	cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
	__raw_writel(cfg \| 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
	__raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
	break;

	case CPU_BMIPS4380:
	/* CBG workaround for early BMIPS4380 CPUs */
	switch (read_c0_prid()) {
	case 0x2a040:
	case 0x2a042:
	case 0x2a044:
	case 0x2a060:
	cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
	__raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
	__raw_readl(cbr + BMIPS_L2_CONFIG);
	}

	/* clear BHTD to enable branch history table */
	clear_c0_brcm_config_0(BIT(21));

	/* XI/ROTR enable */
	set_c0_brcm_config_0(BIT(23));
	set_c0_brcm_cmt_ctrl(BIT(15));
	break;

	case CPU_BMIPS5000:
	/* enable RDHWR, BRDHWR */
	set_c0_brcm_config(BIT(17) \| BIT(21));

	/* Disable JTB */
	__asm__ __volatile__(
	" .set noreorder\n"
	" li $8, 0x5a455048\n"
	" .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */
	" .word 0x4008b008\n" /* mfc0 t0, $22, 8 */
	" li $9, 0x00008000\n"
	" or $8, $8, $9\n"
	" .word 0x4088b008\n" /* mtc0 t0, $22, 8 */
	" sync\n"
	" li $8, 0x0\n"
	" .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */
	" .set reorder\n"
	: : : "$8", "$9");

	/* XI enable */
	set_c0_brcm_config(BIT(27));

	/* enable MIPS32R2 ROR instruction for XI TLB handlers */
	__asm__ __volatile__(
	" li $8, 0x5a455048\n"
	" .word 0x4088b00f\n" /* mtc0 $8, $22, 15 */
	" nop; nop; nop\n"
	" .word 0x4008b008\n" /* mfc0 $8, $22, 8 */
	" lui $9, 0x0100\n"
	" or $8, $9\n"
	" .word 0x4088b008\n" /* mtc0 $8, $22, 8 */
	: : : "$8", "$9");
	break;
	}
	}