| /* | 
 |  * Copyright (c) 2008-2011 Atheros Communications Inc. | 
 |  * | 
 |  * Permission to use, copy, modify, and/or distribute this software for any | 
 |  * purpose with or without fee is hereby granted, provided that the above | 
 |  * copyright notice and this permission notice appear in all copies. | 
 |  * | 
 |  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
 |  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
 |  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
 |  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
 |  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
 |  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
 |  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
 |  */ | 
 |  | 
 | #include "hw.h" | 
 | #include "ar5008_initvals.h" | 
 | #include "ar9001_initvals.h" | 
 | #include "ar9002_initvals.h" | 
 | #include "ar9002_phy.h" | 
 |  | 
 | int modparam_force_new_ani; | 
 | module_param_named(force_new_ani, modparam_force_new_ani, int, 0444); | 
 | MODULE_PARM_DESC(force_new_ani, "Force new ANI for AR5008, AR9001, AR9002"); | 
 |  | 
 | /* General hardware code for the A5008/AR9001/AR9002 hadware families */ | 
 |  | 
 | static void ar9002_hw_init_mode_regs(struct ath_hw *ah) | 
 | { | 
 | 	if (AR_SREV_9271(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271, | 
 | 			       ARRAY_SIZE(ar9271Modes_9271), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271, | 
 | 			       ARRAY_SIZE(ar9271Common_9271), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon_normal_cck_fir_coeff_9271, | 
 | 			       ar9271Common_normal_cck_fir_coeff_9271, | 
 | 			       ARRAY_SIZE(ar9271Common_normal_cck_fir_coeff_9271), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon_japan_2484_cck_fir_coeff_9271, | 
 | 			       ar9271Common_japan_2484_cck_fir_coeff_9271, | 
 | 			       ARRAY_SIZE(ar9271Common_japan_2484_cck_fir_coeff_9271), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniModes_9271_1_0_only, | 
 | 			       ar9271Modes_9271_1_0_only, | 
 | 			       ARRAY_SIZE(ar9271Modes_9271_1_0_only), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg, | 
 | 			       ARRAY_SIZE(ar9271Modes_9271_ANI_reg), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniModes_high_power_tx_gain_9271, | 
 | 			       ar9271Modes_high_power_tx_gain_9271, | 
 | 			       ARRAY_SIZE(ar9271Modes_high_power_tx_gain_9271), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniModes_normal_power_tx_gain_9271, | 
 | 			       ar9271Modes_normal_power_tx_gain_9271, | 
 | 			       ARRAY_SIZE(ar9271Modes_normal_power_tx_gain_9271), 6); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (AR_SREV_9287_11_OR_LATER(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1, | 
 | 				ARRAY_SIZE(ar9287Modes_9287_1_1), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1, | 
 | 				ARRAY_SIZE(ar9287Common_9287_1_1), 2); | 
 | 		if (ah->config.pcie_clock_req) | 
 | 			INIT_INI_ARRAY(&ah->iniPcieSerdes, | 
 | 			ar9287PciePhy_clkreq_off_L1_9287_1_1, | 
 | 			ARRAY_SIZE(ar9287PciePhy_clkreq_off_L1_9287_1_1), 2); | 
 | 		else | 
 | 			INIT_INI_ARRAY(&ah->iniPcieSerdes, | 
 | 			ar9287PciePhy_clkreq_always_on_L1_9287_1_1, | 
 | 			ARRAY_SIZE(ar9287PciePhy_clkreq_always_on_L1_9287_1_1), | 
 | 					2); | 
 | 	} else if (AR_SREV_9285_12_OR_LATER(ah)) { | 
 |  | 
 |  | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2, | 
 | 			       ARRAY_SIZE(ar9285Modes_9285_1_2), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2, | 
 | 			       ARRAY_SIZE(ar9285Common_9285_1_2), 2); | 
 |  | 
 | 		if (ah->config.pcie_clock_req) { | 
 | 			INIT_INI_ARRAY(&ah->iniPcieSerdes, | 
 | 			ar9285PciePhy_clkreq_off_L1_9285_1_2, | 
 | 			ARRAY_SIZE(ar9285PciePhy_clkreq_off_L1_9285_1_2), 2); | 
 | 		} else { | 
 | 			INIT_INI_ARRAY(&ah->iniPcieSerdes, | 
 | 			ar9285PciePhy_clkreq_always_on_L1_9285_1_2, | 
 | 			ARRAY_SIZE(ar9285PciePhy_clkreq_always_on_L1_9285_1_2), | 
 | 				  2); | 
 | 		} | 
 | 	} else if (AR_SREV_9280_20_OR_LATER(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2, | 
 | 			       ARRAY_SIZE(ar9280Modes_9280_2), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2, | 
 | 			       ARRAY_SIZE(ar9280Common_9280_2), 2); | 
 |  | 
 | 		if (ah->config.pcie_clock_req) { | 
 | 			INIT_INI_ARRAY(&ah->iniPcieSerdes, | 
 | 			       ar9280PciePhy_clkreq_off_L1_9280, | 
 | 			       ARRAY_SIZE(ar9280PciePhy_clkreq_off_L1_9280), 2); | 
 | 		} else { | 
 | 			INIT_INI_ARRAY(&ah->iniPcieSerdes, | 
 | 			       ar9280PciePhy_clkreq_always_on_L1_9280, | 
 | 			       ARRAY_SIZE(ar9280PciePhy_clkreq_always_on_L1_9280), 2); | 
 | 		} | 
 | 		INIT_INI_ARRAY(&ah->iniModesAdditional, | 
 | 			       ar9280Modes_fast_clock_9280_2, | 
 | 			       ARRAY_SIZE(ar9280Modes_fast_clock_9280_2), 3); | 
 | 	} else if (AR_SREV_9160_10_OR_LATER(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160, | 
 | 			       ARRAY_SIZE(ar5416Modes_9160), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160, | 
 | 			       ARRAY_SIZE(ar5416Common_9160), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank0_9160), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain_9160, | 
 | 			       ARRAY_SIZE(ar5416BB_RfGain_9160), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank1_9160), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank2_9160), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank3_9160), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank6_9160), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank6TPC_9160), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7_9160, | 
 | 			       ARRAY_SIZE(ar5416Bank7_9160), 2); | 
 | 		if (AR_SREV_9160_11(ah)) { | 
 | 			INIT_INI_ARRAY(&ah->iniAddac, | 
 | 				       ar5416Addac_9160_1_1, | 
 | 				       ARRAY_SIZE(ar5416Addac_9160_1_1), 2); | 
 | 		} else { | 
 | 			INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160, | 
 | 				       ARRAY_SIZE(ar5416Addac_9160), 2); | 
 | 		} | 
 | 	} else if (AR_SREV_9100_OR_LATER(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100, | 
 | 			       ARRAY_SIZE(ar5416Modes_9100), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100, | 
 | 			       ARRAY_SIZE(ar5416Common_9100), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank0_9100), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain_9100, | 
 | 			       ARRAY_SIZE(ar5416BB_RfGain_9100), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank1_9100), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank2_9100), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank3_9100), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank6_9100), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank6TPC_9100), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7_9100, | 
 | 			       ARRAY_SIZE(ar5416Bank7_9100), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100, | 
 | 			       ARRAY_SIZE(ar5416Addac_9100), 2); | 
 | 	} else { | 
 | 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes, | 
 | 			       ARRAY_SIZE(ar5416Modes), 6); | 
 | 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common, | 
 | 			       ARRAY_SIZE(ar5416Common), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0, | 
 | 			       ARRAY_SIZE(ar5416Bank0), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain, | 
 | 			       ARRAY_SIZE(ar5416BB_RfGain), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1, | 
 | 			       ARRAY_SIZE(ar5416Bank1), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2, | 
 | 			       ARRAY_SIZE(ar5416Bank2), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3, | 
 | 			       ARRAY_SIZE(ar5416Bank3), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6, | 
 | 			       ARRAY_SIZE(ar5416Bank6), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC, | 
 | 			       ARRAY_SIZE(ar5416Bank6TPC), 3); | 
 | 		INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7, | 
 | 			       ARRAY_SIZE(ar5416Bank7), 2); | 
 | 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac, | 
 | 			       ARRAY_SIZE(ar5416Addac), 2); | 
 | 	} | 
 | } | 
 |  | 
 | /* Support for Japan ch.14 (2484) spread */ | 
 | void ar9002_hw_cck_chan14_spread(struct ath_hw *ah) | 
 | { | 
 | 	if (AR_SREV_9287_11_OR_LATER(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniCckfirNormal, | 
 | 		       ar9287Common_normal_cck_fir_coeff_9287_1_1, | 
 | 		       ARRAY_SIZE(ar9287Common_normal_cck_fir_coeff_9287_1_1), | 
 | 		       2); | 
 | 		INIT_INI_ARRAY(&ah->iniCckfirJapan2484, | 
 | 		       ar9287Common_japan_2484_cck_fir_coeff_9287_1_1, | 
 | 		       ARRAY_SIZE(ar9287Common_japan_2484_cck_fir_coeff_9287_1_1), | 
 | 		       2); | 
 | 	} | 
 | } | 
 |  | 
 | static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah) | 
 | { | 
 | 	u32 rxgain_type; | 
 |  | 
 | 	if (ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV) >= | 
 | 	    AR5416_EEP_MINOR_VER_17) { | 
 | 		rxgain_type = ah->eep_ops->get_eeprom(ah, EEP_RXGAIN_TYPE); | 
 |  | 
 | 		if (rxgain_type == AR5416_EEP_RXGAIN_13DB_BACKOFF) | 
 | 			INIT_INI_ARRAY(&ah->iniModesRxGain, | 
 | 			ar9280Modes_backoff_13db_rxgain_9280_2, | 
 | 			ARRAY_SIZE(ar9280Modes_backoff_13db_rxgain_9280_2), 6); | 
 | 		else if (rxgain_type == AR5416_EEP_RXGAIN_23DB_BACKOFF) | 
 | 			INIT_INI_ARRAY(&ah->iniModesRxGain, | 
 | 			ar9280Modes_backoff_23db_rxgain_9280_2, | 
 | 			ARRAY_SIZE(ar9280Modes_backoff_23db_rxgain_9280_2), 6); | 
 | 		else | 
 | 			INIT_INI_ARRAY(&ah->iniModesRxGain, | 
 | 			ar9280Modes_original_rxgain_9280_2, | 
 | 			ARRAY_SIZE(ar9280Modes_original_rxgain_9280_2), 6); | 
 | 	} else { | 
 | 		INIT_INI_ARRAY(&ah->iniModesRxGain, | 
 | 			ar9280Modes_original_rxgain_9280_2, | 
 | 			ARRAY_SIZE(ar9280Modes_original_rxgain_9280_2), 6); | 
 | 	} | 
 | } | 
 |  | 
 | static void ar9280_20_hw_init_txgain_ini(struct ath_hw *ah) | 
 | { | 
 | 	u32 txgain_type; | 
 |  | 
 | 	if (ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV) >= | 
 | 	    AR5416_EEP_MINOR_VER_19) { | 
 | 		txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE); | 
 |  | 
 | 		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) | 
 | 			INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 			ar9280Modes_high_power_tx_gain_9280_2, | 
 | 			ARRAY_SIZE(ar9280Modes_high_power_tx_gain_9280_2), 6); | 
 | 		else | 
 | 			INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 			ar9280Modes_original_tx_gain_9280_2, | 
 | 			ARRAY_SIZE(ar9280Modes_original_tx_gain_9280_2), 6); | 
 | 	} else { | 
 | 		INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 		ar9280Modes_original_tx_gain_9280_2, | 
 | 		ARRAY_SIZE(ar9280Modes_original_tx_gain_9280_2), 6); | 
 | 	} | 
 | } | 
 |  | 
 | static void ar9002_hw_init_mode_gain_regs(struct ath_hw *ah) | 
 | { | 
 | 	if (AR_SREV_9287_11_OR_LATER(ah)) | 
 | 		INIT_INI_ARRAY(&ah->iniModesRxGain, | 
 | 		ar9287Modes_rx_gain_9287_1_1, | 
 | 		ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_1), 6); | 
 | 	else if (AR_SREV_9280_20(ah)) | 
 | 		ar9280_20_hw_init_rxgain_ini(ah); | 
 |  | 
 | 	if (AR_SREV_9287_11_OR_LATER(ah)) { | 
 | 		INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 		ar9287Modes_tx_gain_9287_1_1, | 
 | 		ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_1), 6); | 
 | 	} else if (AR_SREV_9280_20(ah)) { | 
 | 		ar9280_20_hw_init_txgain_ini(ah); | 
 | 	} else if (AR_SREV_9285_12_OR_LATER(ah)) { | 
 | 		u32 txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE); | 
 |  | 
 | 		/* txgain table */ | 
 | 		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) { | 
 | 			if (AR_SREV_9285E_20(ah)) { | 
 | 				INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 				ar9285Modes_XE2_0_high_power, | 
 | 				ARRAY_SIZE( | 
 | 				  ar9285Modes_XE2_0_high_power), 6); | 
 | 			} else { | 
 | 				INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 				ar9285Modes_high_power_tx_gain_9285_1_2, | 
 | 				ARRAY_SIZE( | 
 | 				  ar9285Modes_high_power_tx_gain_9285_1_2), 6); | 
 | 			} | 
 | 		} else { | 
 | 			if (AR_SREV_9285E_20(ah)) { | 
 | 				INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 				ar9285Modes_XE2_0_normal_power, | 
 | 				ARRAY_SIZE( | 
 | 				  ar9285Modes_XE2_0_normal_power), 6); | 
 | 			} else { | 
 | 				INIT_INI_ARRAY(&ah->iniModesTxGain, | 
 | 				ar9285Modes_original_tx_gain_9285_1_2, | 
 | 				ARRAY_SIZE( | 
 | 				  ar9285Modes_original_tx_gain_9285_1_2), 6); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Helper for ASPM support. | 
 |  * | 
 |  * Disable PLL when in L0s as well as receiver clock when in L1. | 
 |  * This power saving option must be enabled through the SerDes. | 
 |  * | 
 |  * Programming the SerDes must go through the same 288 bit serial shift | 
 |  * register as the other analog registers.  Hence the 9 writes. | 
 |  */ | 
 | static void ar9002_hw_configpcipowersave(struct ath_hw *ah, | 
 | 					 int restore, | 
 | 					 int power_off) | 
 | { | 
 | 	u8 i; | 
 | 	u32 val; | 
 |  | 
 | 	if (ah->is_pciexpress != true || ah->aspm_enabled != true) | 
 | 		return; | 
 |  | 
 | 	/* Nothing to do on restore for 11N */ | 
 | 	if (!restore) { | 
 | 		if (AR_SREV_9280_20_OR_LATER(ah)) { | 
 | 			/* | 
 | 			 * AR9280 2.0 or later chips use SerDes values from the | 
 | 			 * initvals.h initialized depending on chipset during | 
 | 			 * __ath9k_hw_init() | 
 | 			 */ | 
 | 			for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) { | 
 | 				REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0), | 
 | 					  INI_RA(&ah->iniPcieSerdes, i, 1)); | 
 | 			} | 
 | 		} else { | 
 | 			ENABLE_REGWRITE_BUFFER(ah); | 
 |  | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); | 
 |  | 
 | 			/* RX shut off when elecidle is asserted */ | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039); | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824); | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579); | 
 |  | 
 | 			/* | 
 | 			 * Ignore ah->ah_config.pcie_clock_req setting for | 
 | 			 * pre-AR9280 11n | 
 | 			 */ | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff); | 
 |  | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40); | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554); | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007); | 
 |  | 
 | 			/* Load the new settings */ | 
 | 			REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); | 
 |  | 
 | 			REGWRITE_BUFFER_FLUSH(ah); | 
 | 		} | 
 |  | 
 | 		udelay(1000); | 
 | 	} | 
 |  | 
 | 	if (power_off) { | 
 | 		/* clear bit 19 to disable L1 */ | 
 | 		REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); | 
 |  | 
 | 		val = REG_READ(ah, AR_WA); | 
 |  | 
 | 		/* | 
 | 		 * Set PCIe workaround bits | 
 | 		 * In AR9280 and AR9285, bit 14 in WA register (disable L1) | 
 | 		 * should only  be set when device enters D3 and be | 
 | 		 * cleared when device comes back to D0. | 
 | 		 */ | 
 | 		if (ah->config.pcie_waen) { | 
 | 			if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE) | 
 | 				val |= AR_WA_D3_L1_DISABLE; | 
 | 		} else { | 
 | 			if (((AR_SREV_9285(ah) || | 
 | 			      AR_SREV_9271(ah) || | 
 | 			      AR_SREV_9287(ah)) && | 
 | 			     (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) || | 
 | 			    (AR_SREV_9280(ah) && | 
 | 			     (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) { | 
 | 				val |= AR_WA_D3_L1_DISABLE; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) { | 
 | 			/* | 
 | 			 * Disable bit 6 and 7 before entering D3 to | 
 | 			 * prevent system hang. | 
 | 			 */ | 
 | 			val &= ~(AR_WA_BIT6 | AR_WA_BIT7); | 
 | 		} | 
 |  | 
 | 		if (AR_SREV_9280(ah)) | 
 | 			val |= AR_WA_BIT22; | 
 |  | 
 | 		if (AR_SREV_9285E_20(ah)) | 
 | 			val |= AR_WA_BIT23; | 
 |  | 
 | 		REG_WRITE(ah, AR_WA, val); | 
 | 	} else { | 
 | 		if (ah->config.pcie_waen) { | 
 | 			val = ah->config.pcie_waen; | 
 | 			if (!power_off) | 
 | 				val &= (~AR_WA_D3_L1_DISABLE); | 
 | 		} else { | 
 | 			if (AR_SREV_9285(ah) || | 
 | 			    AR_SREV_9271(ah) || | 
 | 			    AR_SREV_9287(ah)) { | 
 | 				val = AR9285_WA_DEFAULT; | 
 | 				if (!power_off) | 
 | 					val &= (~AR_WA_D3_L1_DISABLE); | 
 | 			} | 
 | 			else if (AR_SREV_9280(ah)) { | 
 | 				/* | 
 | 				 * For AR9280 chips, bit 22 of 0x4004 | 
 | 				 * needs to be set. | 
 | 				 */ | 
 | 				val = AR9280_WA_DEFAULT; | 
 | 				if (!power_off) | 
 | 					val &= (~AR_WA_D3_L1_DISABLE); | 
 | 			} else { | 
 | 				val = AR_WA_DEFAULT; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* WAR for ASPM system hang */ | 
 | 		if (AR_SREV_9285(ah) || AR_SREV_9287(ah)) | 
 | 			val |= (AR_WA_BIT6 | AR_WA_BIT7); | 
 |  | 
 | 		if (AR_SREV_9285E_20(ah)) | 
 | 			val |= AR_WA_BIT23; | 
 |  | 
 | 		REG_WRITE(ah, AR_WA, val); | 
 |  | 
 | 		/* set bit 19 to allow forcing of pcie core into L1 state */ | 
 | 		REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA); | 
 | 	} | 
 | } | 
 |  | 
 | static int ar9002_hw_get_radiorev(struct ath_hw *ah) | 
 | { | 
 | 	u32 val; | 
 | 	int i; | 
 |  | 
 | 	ENABLE_REGWRITE_BUFFER(ah); | 
 |  | 
 | 	REG_WRITE(ah, AR_PHY(0x36), 0x00007058); | 
 | 	for (i = 0; i < 8; i++) | 
 | 		REG_WRITE(ah, AR_PHY(0x20), 0x00010000); | 
 |  | 
 | 	REGWRITE_BUFFER_FLUSH(ah); | 
 |  | 
 | 	val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff; | 
 | 	val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4); | 
 |  | 
 | 	return ath9k_hw_reverse_bits(val, 8); | 
 | } | 
 |  | 
 | int ar9002_hw_rf_claim(struct ath_hw *ah) | 
 | { | 
 | 	u32 val; | 
 |  | 
 | 	REG_WRITE(ah, AR_PHY(0), 0x00000007); | 
 |  | 
 | 	val = ar9002_hw_get_radiorev(ah); | 
 | 	switch (val & AR_RADIO_SREV_MAJOR) { | 
 | 	case 0: | 
 | 		val = AR_RAD5133_SREV_MAJOR; | 
 | 		break; | 
 | 	case AR_RAD5133_SREV_MAJOR: | 
 | 	case AR_RAD5122_SREV_MAJOR: | 
 | 	case AR_RAD2133_SREV_MAJOR: | 
 | 	case AR_RAD2122_SREV_MAJOR: | 
 | 		break; | 
 | 	default: | 
 | 		ath_err(ath9k_hw_common(ah), | 
 | 			"Radio Chip Rev 0x%02X not supported\n", | 
 | 			val & AR_RADIO_SREV_MAJOR); | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	ah->hw_version.analog5GhzRev = val; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void ar9002_hw_enable_async_fifo(struct ath_hw *ah) | 
 | { | 
 | 	if (AR_SREV_9287_13_OR_LATER(ah)) { | 
 | 		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3, | 
 | 				AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL); | 
 | 		REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO); | 
 | 		REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3, | 
 | 				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET); | 
 | 		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3, | 
 | 				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET); | 
 | 	} | 
 | } | 
 |  | 
 | /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */ | 
 | void ar9002_hw_attach_ops(struct ath_hw *ah) | 
 | { | 
 | 	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); | 
 | 	struct ath_hw_ops *ops = ath9k_hw_ops(ah); | 
 |  | 
 | 	priv_ops->init_mode_regs = ar9002_hw_init_mode_regs; | 
 | 	priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs; | 
 |  | 
 | 	ops->config_pci_powersave = ar9002_hw_configpcipowersave; | 
 |  | 
 | 	ar5008_hw_attach_phy_ops(ah); | 
 | 	if (AR_SREV_9280_20_OR_LATER(ah)) | 
 | 		ar9002_hw_attach_phy_ops(ah); | 
 |  | 
 | 	ar9002_hw_attach_calib_ops(ah); | 
 | 	ar9002_hw_attach_mac_ops(ah); | 
 | } | 
 |  | 
 | void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan) | 
 | { | 
 | 	u32 modesIndex; | 
 | 	int i; | 
 |  | 
 | 	switch (chan->chanmode) { | 
 | 	case CHANNEL_A: | 
 | 	case CHANNEL_A_HT20: | 
 | 		modesIndex = 1; | 
 | 		break; | 
 | 	case CHANNEL_A_HT40PLUS: | 
 | 	case CHANNEL_A_HT40MINUS: | 
 | 		modesIndex = 2; | 
 | 		break; | 
 | 	case CHANNEL_G: | 
 | 	case CHANNEL_G_HT20: | 
 | 	case CHANNEL_B: | 
 | 		modesIndex = 4; | 
 | 		break; | 
 | 	case CHANNEL_G_HT40PLUS: | 
 | 	case CHANNEL_G_HT40MINUS: | 
 | 		modesIndex = 3; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ENABLE_REGWRITE_BUFFER(ah); | 
 |  | 
 | 	for (i = 0; i < ah->iniModes_9271_ANI_reg.ia_rows; i++) { | 
 | 		u32 reg = INI_RA(&ah->iniModes_9271_ANI_reg, i, 0); | 
 | 		u32 val = INI_RA(&ah->iniModes_9271_ANI_reg, i, modesIndex); | 
 | 		u32 val_orig; | 
 |  | 
 | 		if (reg == AR_PHY_CCK_DETECT) { | 
 | 			val_orig = REG_READ(ah, reg); | 
 | 			val &= AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK; | 
 | 			val_orig &= ~AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK; | 
 |  | 
 | 			REG_WRITE(ah, reg, val|val_orig); | 
 | 		} else | 
 | 			REG_WRITE(ah, reg, val); | 
 | 	} | 
 |  | 
 | 	REGWRITE_BUFFER_FLUSH(ah); | 
 | } |