| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Synopsys DDR ECC Driver |
| * This driver is based on ppc4xx_edac.c drivers |
| * |
| * Copyright (C) 2012 - 2014 Xilinx, Inc. |
| */ |
| |
| #include <linux/edac.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/of.h> |
| |
| #include "edac_module.h" |
| |
| /* Number of cs_rows needed per memory controller */ |
| #define SYNPS_EDAC_NR_CSROWS 1 |
| |
| /* Number of channels per memory controller */ |
| #define SYNPS_EDAC_NR_CHANS 1 |
| |
| /* Granularity of reported error in bytes */ |
| #define SYNPS_EDAC_ERR_GRAIN 1 |
| |
| #define SYNPS_EDAC_MSG_SIZE 256 |
| |
| #define SYNPS_EDAC_MOD_STRING "synps_edac" |
| #define SYNPS_EDAC_MOD_VER "1" |
| |
| /* Synopsys DDR memory controller registers that are relevant to ECC */ |
| #define CTRL_OFST 0x0 |
| #define T_ZQ_OFST 0xA4 |
| |
| /* ECC control register */ |
| #define ECC_CTRL_OFST 0xC4 |
| /* ECC log register */ |
| #define CE_LOG_OFST 0xC8 |
| /* ECC address register */ |
| #define CE_ADDR_OFST 0xCC |
| /* ECC data[31:0] register */ |
| #define CE_DATA_31_0_OFST 0xD0 |
| |
| /* Uncorrectable error info registers */ |
| #define UE_LOG_OFST 0xDC |
| #define UE_ADDR_OFST 0xE0 |
| #define UE_DATA_31_0_OFST 0xE4 |
| |
| #define STAT_OFST 0xF0 |
| #define SCRUB_OFST 0xF4 |
| |
| /* Control register bit field definitions */ |
| #define CTRL_BW_MASK 0xC |
| #define CTRL_BW_SHIFT 2 |
| |
| #define DDRCTL_WDTH_16 1 |
| #define DDRCTL_WDTH_32 0 |
| |
| /* ZQ register bit field definitions */ |
| #define T_ZQ_DDRMODE_MASK 0x2 |
| |
| /* ECC control register bit field definitions */ |
| #define ECC_CTRL_CLR_CE_ERR 0x2 |
| #define ECC_CTRL_CLR_UE_ERR 0x1 |
| |
| /* ECC correctable/uncorrectable error log register definitions */ |
| #define LOG_VALID 0x1 |
| #define CE_LOG_BITPOS_MASK 0xFE |
| #define CE_LOG_BITPOS_SHIFT 1 |
| |
| /* ECC correctable/uncorrectable error address register definitions */ |
| #define ADDR_COL_MASK 0xFFF |
| #define ADDR_ROW_MASK 0xFFFF000 |
| #define ADDR_ROW_SHIFT 12 |
| #define ADDR_BANK_MASK 0x70000000 |
| #define ADDR_BANK_SHIFT 28 |
| |
| /* ECC statistic register definitions */ |
| #define STAT_UECNT_MASK 0xFF |
| #define STAT_CECNT_MASK 0xFF00 |
| #define STAT_CECNT_SHIFT 8 |
| |
| /* ECC scrub register definitions */ |
| #define SCRUB_MODE_MASK 0x7 |
| #define SCRUB_MODE_SECDED 0x4 |
| |
| /* DDR ECC Quirks */ |
| #define DDR_ECC_INTR_SUPPORT BIT(0) |
| #define DDR_ECC_DATA_POISON_SUPPORT BIT(1) |
| #define DDR_ECC_INTR_SELF_CLEAR BIT(2) |
| |
| /* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */ |
| /* ECC Configuration Registers */ |
| #define ECC_CFG0_OFST 0x70 |
| #define ECC_CFG1_OFST 0x74 |
| |
| /* ECC Status Register */ |
| #define ECC_STAT_OFST 0x78 |
| |
| /* ECC Clear Register */ |
| #define ECC_CLR_OFST 0x7C |
| |
| /* ECC Error count Register */ |
| #define ECC_ERRCNT_OFST 0x80 |
| |
| /* ECC Corrected Error Address Register */ |
| #define ECC_CEADDR0_OFST 0x84 |
| #define ECC_CEADDR1_OFST 0x88 |
| |
| /* ECC Syndrome Registers */ |
| #define ECC_CSYND0_OFST 0x8C |
| #define ECC_CSYND1_OFST 0x90 |
| #define ECC_CSYND2_OFST 0x94 |
| |
| /* ECC Bit Mask0 Address Register */ |
| #define ECC_BITMASK0_OFST 0x98 |
| #define ECC_BITMASK1_OFST 0x9C |
| #define ECC_BITMASK2_OFST 0xA0 |
| |
| /* ECC UnCorrected Error Address Register */ |
| #define ECC_UEADDR0_OFST 0xA4 |
| #define ECC_UEADDR1_OFST 0xA8 |
| |
| /* ECC Syndrome Registers */ |
| #define ECC_UESYND0_OFST 0xAC |
| #define ECC_UESYND1_OFST 0xB0 |
| #define ECC_UESYND2_OFST 0xB4 |
| |
| /* ECC Poison Address Reg */ |
| #define ECC_POISON0_OFST 0xB8 |
| #define ECC_POISON1_OFST 0xBC |
| |
| #define ECC_ADDRMAP0_OFFSET 0x200 |
| |
| /* Control register bitfield definitions */ |
| #define ECC_CTRL_BUSWIDTH_MASK 0x3000 |
| #define ECC_CTRL_BUSWIDTH_SHIFT 12 |
| #define ECC_CTRL_CLR_CE_ERRCNT BIT(2) |
| #define ECC_CTRL_CLR_UE_ERRCNT BIT(3) |
| |
| /* DDR Control Register width definitions */ |
| #define DDRCTL_EWDTH_16 2 |
| #define DDRCTL_EWDTH_32 1 |
| #define DDRCTL_EWDTH_64 0 |
| |
| /* ECC status register definitions */ |
| #define ECC_STAT_UECNT_MASK 0xF0000 |
| #define ECC_STAT_UECNT_SHIFT 16 |
| #define ECC_STAT_CECNT_MASK 0xF00 |
| #define ECC_STAT_CECNT_SHIFT 8 |
| #define ECC_STAT_BITNUM_MASK 0x7F |
| |
| /* ECC error count register definitions */ |
| #define ECC_ERRCNT_UECNT_MASK 0xFFFF0000 |
| #define ECC_ERRCNT_UECNT_SHIFT 16 |
| #define ECC_ERRCNT_CECNT_MASK 0xFFFF |
| |
| /* DDR QOS Interrupt register definitions */ |
| #define DDR_QOS_IRQ_STAT_OFST 0x20200 |
| #define DDR_QOSUE_MASK 0x4 |
| #define DDR_QOSCE_MASK 0x2 |
| #define ECC_CE_UE_INTR_MASK 0x6 |
| #define DDR_QOS_IRQ_EN_OFST 0x20208 |
| #define DDR_QOS_IRQ_DB_OFST 0x2020C |
| |
| /* DDR QOS Interrupt register definitions */ |
| #define DDR_UE_MASK BIT(9) |
| #define DDR_CE_MASK BIT(8) |
| |
| /* ECC Corrected Error Register Mask and Shifts*/ |
| #define ECC_CEADDR0_RW_MASK 0x3FFFF |
| #define ECC_CEADDR0_RNK_MASK BIT(24) |
| #define ECC_CEADDR1_BNKGRP_MASK 0x3000000 |
| #define ECC_CEADDR1_BNKNR_MASK 0x70000 |
| #define ECC_CEADDR1_BLKNR_MASK 0xFFF |
| #define ECC_CEADDR1_BNKGRP_SHIFT 24 |
| #define ECC_CEADDR1_BNKNR_SHIFT 16 |
| |
| /* ECC Poison register shifts */ |
| #define ECC_POISON0_RANK_SHIFT 24 |
| #define ECC_POISON0_RANK_MASK BIT(24) |
| #define ECC_POISON0_COLUMN_SHIFT 0 |
| #define ECC_POISON0_COLUMN_MASK 0xFFF |
| #define ECC_POISON1_BG_SHIFT 28 |
| #define ECC_POISON1_BG_MASK 0x30000000 |
| #define ECC_POISON1_BANKNR_SHIFT 24 |
| #define ECC_POISON1_BANKNR_MASK 0x7000000 |
| #define ECC_POISON1_ROW_SHIFT 0 |
| #define ECC_POISON1_ROW_MASK 0x3FFFF |
| |
| /* DDR Memory type defines */ |
| #define MEM_TYPE_DDR3 0x1 |
| #define MEM_TYPE_LPDDR3 0x8 |
| #define MEM_TYPE_DDR2 0x4 |
| #define MEM_TYPE_DDR4 0x10 |
| #define MEM_TYPE_LPDDR4 0x20 |
| |
| /* DDRC Software control register */ |
| #define DDRC_SWCTL 0x320 |
| |
| /* DDRC ECC CE & UE poison mask */ |
| #define ECC_CEPOISON_MASK 0x3 |
| #define ECC_UEPOISON_MASK 0x1 |
| |
| /* DDRC Device config masks */ |
| #define DDRC_MSTR_CFG_MASK 0xC0000000 |
| #define DDRC_MSTR_CFG_SHIFT 30 |
| #define DDRC_MSTR_CFG_X4_MASK 0x0 |
| #define DDRC_MSTR_CFG_X8_MASK 0x1 |
| #define DDRC_MSTR_CFG_X16_MASK 0x2 |
| #define DDRC_MSTR_CFG_X32_MASK 0x3 |
| |
| #define DDR_MAX_ROW_SHIFT 18 |
| #define DDR_MAX_COL_SHIFT 14 |
| #define DDR_MAX_BANK_SHIFT 3 |
| #define DDR_MAX_BANKGRP_SHIFT 2 |
| |
| #define ROW_MAX_VAL_MASK 0xF |
| #define COL_MAX_VAL_MASK 0xF |
| #define BANK_MAX_VAL_MASK 0x1F |
| #define BANKGRP_MAX_VAL_MASK 0x1F |
| #define RANK_MAX_VAL_MASK 0x1F |
| |
| #define ROW_B0_BASE 6 |
| #define ROW_B1_BASE 7 |
| #define ROW_B2_BASE 8 |
| #define ROW_B3_BASE 9 |
| #define ROW_B4_BASE 10 |
| #define ROW_B5_BASE 11 |
| #define ROW_B6_BASE 12 |
| #define ROW_B7_BASE 13 |
| #define ROW_B8_BASE 14 |
| #define ROW_B9_BASE 15 |
| #define ROW_B10_BASE 16 |
| #define ROW_B11_BASE 17 |
| #define ROW_B12_BASE 18 |
| #define ROW_B13_BASE 19 |
| #define ROW_B14_BASE 20 |
| #define ROW_B15_BASE 21 |
| #define ROW_B16_BASE 22 |
| #define ROW_B17_BASE 23 |
| |
| #define COL_B2_BASE 2 |
| #define COL_B3_BASE 3 |
| #define COL_B4_BASE 4 |
| #define COL_B5_BASE 5 |
| #define COL_B6_BASE 6 |
| #define COL_B7_BASE 7 |
| #define COL_B8_BASE 8 |
| #define COL_B9_BASE 9 |
| #define COL_B10_BASE 10 |
| #define COL_B11_BASE 11 |
| #define COL_B12_BASE 12 |
| #define COL_B13_BASE 13 |
| |
| #define BANK_B0_BASE 2 |
| #define BANK_B1_BASE 3 |
| #define BANK_B2_BASE 4 |
| |
| #define BANKGRP_B0_BASE 2 |
| #define BANKGRP_B1_BASE 3 |
| |
| #define RANK_B0_BASE 6 |
| |
| /** |
| * struct ecc_error_info - ECC error log information. |
| * @row: Row number. |
| * @col: Column number. |
| * @bank: Bank number. |
| * @bitpos: Bit position. |
| * @data: Data causing the error. |
| * @bankgrpnr: Bank group number. |
| * @blknr: Block number. |
| */ |
| struct ecc_error_info { |
| u32 row; |
| u32 col; |
| u32 bank; |
| u32 bitpos; |
| u32 data; |
| u32 bankgrpnr; |
| u32 blknr; |
| }; |
| |
| /** |
| * struct synps_ecc_status - ECC status information to report. |
| * @ce_cnt: Correctable error count. |
| * @ue_cnt: Uncorrectable error count. |
| * @ceinfo: Correctable error log information. |
| * @ueinfo: Uncorrectable error log information. |
| */ |
| struct synps_ecc_status { |
| u32 ce_cnt; |
| u32 ue_cnt; |
| struct ecc_error_info ceinfo; |
| struct ecc_error_info ueinfo; |
| }; |
| |
| /** |
| * struct synps_edac_priv - DDR memory controller private instance data. |
| * @baseaddr: Base address of the DDR controller. |
| * @message: Buffer for framing the event specific info. |
| * @stat: ECC status information. |
| * @p_data: Platform data. |
| * @ce_cnt: Correctable Error count. |
| * @ue_cnt: Uncorrectable Error count. |
| * @poison_addr: Data poison address. |
| * @row_shift: Bit shifts for row bit. |
| * @col_shift: Bit shifts for column bit. |
| * @bank_shift: Bit shifts for bank bit. |
| * @bankgrp_shift: Bit shifts for bank group bit. |
| * @rank_shift: Bit shifts for rank bit. |
| */ |
| struct synps_edac_priv { |
| void __iomem *baseaddr; |
| char message[SYNPS_EDAC_MSG_SIZE]; |
| struct synps_ecc_status stat; |
| const struct synps_platform_data *p_data; |
| u32 ce_cnt; |
| u32 ue_cnt; |
| #ifdef CONFIG_EDAC_DEBUG |
| ulong poison_addr; |
| u32 row_shift[18]; |
| u32 col_shift[14]; |
| u32 bank_shift[3]; |
| u32 bankgrp_shift[2]; |
| u32 rank_shift[1]; |
| #endif |
| }; |
| |
| /** |
| * struct synps_platform_data - synps platform data structure. |
| * @get_error_info: Get EDAC error info. |
| * @get_mtype: Get mtype. |
| * @get_dtype: Get dtype. |
| * @get_ecc_state: Get ECC state. |
| * @quirks: To differentiate IPs. |
| */ |
| struct synps_platform_data { |
| int (*get_error_info)(struct synps_edac_priv *priv); |
| enum mem_type (*get_mtype)(const void __iomem *base); |
| enum dev_type (*get_dtype)(const void __iomem *base); |
| bool (*get_ecc_state)(void __iomem *base); |
| int quirks; |
| }; |
| |
| /** |
| * zynq_get_error_info - Get the current ECC error info. |
| * @priv: DDR memory controller private instance data. |
| * |
| * Return: one if there is no error, otherwise zero. |
| */ |
| static int zynq_get_error_info(struct synps_edac_priv *priv) |
| { |
| struct synps_ecc_status *p; |
| u32 regval, clearval = 0; |
| void __iomem *base; |
| |
| base = priv->baseaddr; |
| p = &priv->stat; |
| |
| regval = readl(base + STAT_OFST); |
| if (!regval) |
| return 1; |
| |
| p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT; |
| p->ue_cnt = regval & STAT_UECNT_MASK; |
| |
| regval = readl(base + CE_LOG_OFST); |
| if (!(p->ce_cnt && (regval & LOG_VALID))) |
| goto ue_err; |
| |
| p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT; |
| regval = readl(base + CE_ADDR_OFST); |
| p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT; |
| p->ceinfo.col = regval & ADDR_COL_MASK; |
| p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT; |
| p->ceinfo.data = readl(base + CE_DATA_31_0_OFST); |
| edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos, |
| p->ceinfo.data); |
| clearval = ECC_CTRL_CLR_CE_ERR; |
| |
| ue_err: |
| regval = readl(base + UE_LOG_OFST); |
| if (!(p->ue_cnt && (regval & LOG_VALID))) |
| goto out; |
| |
| regval = readl(base + UE_ADDR_OFST); |
| p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT; |
| p->ueinfo.col = regval & ADDR_COL_MASK; |
| p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT; |
| p->ueinfo.data = readl(base + UE_DATA_31_0_OFST); |
| clearval |= ECC_CTRL_CLR_UE_ERR; |
| |
| out: |
| writel(clearval, base + ECC_CTRL_OFST); |
| writel(0x0, base + ECC_CTRL_OFST); |
| |
| return 0; |
| } |
| |
| /** |
| * zynqmp_get_error_info - Get the current ECC error info. |
| * @priv: DDR memory controller private instance data. |
| * |
| * Return: one if there is no error otherwise returns zero. |
| */ |
| static int zynqmp_get_error_info(struct synps_edac_priv *priv) |
| { |
| struct synps_ecc_status *p; |
| u32 regval, clearval = 0; |
| void __iomem *base; |
| |
| base = priv->baseaddr; |
| p = &priv->stat; |
| |
| regval = readl(base + ECC_ERRCNT_OFST); |
| p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK; |
| p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT; |
| if (!p->ce_cnt) |
| goto ue_err; |
| |
| regval = readl(base + ECC_STAT_OFST); |
| if (!regval) |
| return 1; |
| |
| p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK); |
| |
| regval = readl(base + ECC_CEADDR0_OFST); |
| p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK); |
| regval = readl(base + ECC_CEADDR1_OFST); |
| p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >> |
| ECC_CEADDR1_BNKNR_SHIFT; |
| p->ceinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >> |
| ECC_CEADDR1_BNKGRP_SHIFT; |
| p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK); |
| p->ceinfo.data = readl(base + ECC_CSYND0_OFST); |
| edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n", |
| readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST), |
| readl(base + ECC_CSYND2_OFST)); |
| ue_err: |
| if (!p->ue_cnt) |
| goto out; |
| |
| regval = readl(base + ECC_UEADDR0_OFST); |
| p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK); |
| regval = readl(base + ECC_UEADDR1_OFST); |
| p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >> |
| ECC_CEADDR1_BNKGRP_SHIFT; |
| p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >> |
| ECC_CEADDR1_BNKNR_SHIFT; |
| p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK); |
| p->ueinfo.data = readl(base + ECC_UESYND0_OFST); |
| out: |
| clearval = ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT; |
| clearval |= ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT; |
| writel(clearval, base + ECC_CLR_OFST); |
| writel(0x0, base + ECC_CLR_OFST); |
| |
| return 0; |
| } |
| |
| /** |
| * handle_error - Handle Correctable and Uncorrectable errors. |
| * @mci: EDAC memory controller instance. |
| * @p: Synopsys ECC status structure. |
| * |
| * Handles ECC correctable and uncorrectable errors. |
| */ |
| static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p) |
| { |
| struct synps_edac_priv *priv = mci->pvt_info; |
| struct ecc_error_info *pinf; |
| |
| if (p->ce_cnt) { |
| pinf = &p->ceinfo; |
| if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { |
| snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, |
| "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x", |
| "CE", pinf->row, pinf->bank, |
| pinf->bankgrpnr, pinf->blknr, |
| pinf->bitpos, pinf->data); |
| } else { |
| snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, |
| "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x", |
| "CE", pinf->row, pinf->bank, pinf->col, |
| pinf->bitpos, pinf->data); |
| } |
| |
| edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, |
| p->ce_cnt, 0, 0, 0, 0, 0, -1, |
| priv->message, ""); |
| } |
| |
| if (p->ue_cnt) { |
| pinf = &p->ueinfo; |
| if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { |
| snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, |
| "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d", |
| "UE", pinf->row, pinf->bank, |
| pinf->bankgrpnr, pinf->blknr); |
| } else { |
| snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, |
| "DDR ECC error type :%s Row %d Bank %d Col %d ", |
| "UE", pinf->row, pinf->bank, pinf->col); |
| } |
| |
| edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, |
| p->ue_cnt, 0, 0, 0, 0, 0, -1, |
| priv->message, ""); |
| } |
| |
| memset(p, 0, sizeof(*p)); |
| } |
| |
| static void enable_intr(struct synps_edac_priv *priv) |
| { |
| /* Enable UE/CE Interrupts */ |
| if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR) |
| writel(DDR_UE_MASK | DDR_CE_MASK, |
| priv->baseaddr + ECC_CLR_OFST); |
| else |
| writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK, |
| priv->baseaddr + DDR_QOS_IRQ_EN_OFST); |
| |
| } |
| |
| static void disable_intr(struct synps_edac_priv *priv) |
| { |
| /* Disable UE/CE Interrupts */ |
| if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR) |
| writel(0x0, priv->baseaddr + ECC_CLR_OFST); |
| else |
| writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK, |
| priv->baseaddr + DDR_QOS_IRQ_DB_OFST); |
| } |
| |
| /** |
| * intr_handler - Interrupt Handler for ECC interrupts. |
| * @irq: IRQ number. |
| * @dev_id: Device ID. |
| * |
| * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise. |
| */ |
| static irqreturn_t intr_handler(int irq, void *dev_id) |
| { |
| const struct synps_platform_data *p_data; |
| struct mem_ctl_info *mci = dev_id; |
| struct synps_edac_priv *priv; |
| int status, regval; |
| |
| priv = mci->pvt_info; |
| p_data = priv->p_data; |
| |
| /* |
| * v3.0 of the controller has the ce/ue bits cleared automatically, |
| * so this condition does not apply. |
| */ |
| if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) { |
| regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); |
| regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK); |
| if (!(regval & ECC_CE_UE_INTR_MASK)) |
| return IRQ_NONE; |
| } |
| |
| status = p_data->get_error_info(priv); |
| if (status) |
| return IRQ_NONE; |
| |
| priv->ce_cnt += priv->stat.ce_cnt; |
| priv->ue_cnt += priv->stat.ue_cnt; |
| handle_error(mci, &priv->stat); |
| |
| edac_dbg(3, "Total error count CE %d UE %d\n", |
| priv->ce_cnt, priv->ue_cnt); |
| /* v3.0 of the controller does not have this register */ |
| if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) |
| writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); |
| else |
| enable_intr(priv); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * check_errors - Check controller for ECC errors. |
| * @mci: EDAC memory controller instance. |
| * |
| * Check and post ECC errors. Called by the polling thread. |
| */ |
| static void check_errors(struct mem_ctl_info *mci) |
| { |
| const struct synps_platform_data *p_data; |
| struct synps_edac_priv *priv; |
| int status; |
| |
| priv = mci->pvt_info; |
| p_data = priv->p_data; |
| |
| status = p_data->get_error_info(priv); |
| if (status) |
| return; |
| |
| priv->ce_cnt += priv->stat.ce_cnt; |
| priv->ue_cnt += priv->stat.ue_cnt; |
| handle_error(mci, &priv->stat); |
| |
| edac_dbg(3, "Total error count CE %d UE %d\n", |
| priv->ce_cnt, priv->ue_cnt); |
| } |
| |
| /** |
| * zynq_get_dtype - Return the controller memory width. |
| * @base: DDR memory controller base address. |
| * |
| * Get the EDAC device type width appropriate for the current controller |
| * configuration. |
| * |
| * Return: a device type width enumeration. |
| */ |
| static enum dev_type zynq_get_dtype(const void __iomem *base) |
| { |
| enum dev_type dt; |
| u32 width; |
| |
| width = readl(base + CTRL_OFST); |
| width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT; |
| |
| switch (width) { |
| case DDRCTL_WDTH_16: |
| dt = DEV_X2; |
| break; |
| case DDRCTL_WDTH_32: |
| dt = DEV_X4; |
| break; |
| default: |
| dt = DEV_UNKNOWN; |
| } |
| |
| return dt; |
| } |
| |
| /** |
| * zynqmp_get_dtype - Return the controller memory width. |
| * @base: DDR memory controller base address. |
| * |
| * Get the EDAC device type width appropriate for the current controller |
| * configuration. |
| * |
| * Return: a device type width enumeration. |
| */ |
| static enum dev_type zynqmp_get_dtype(const void __iomem *base) |
| { |
| enum dev_type dt; |
| u32 width; |
| |
| width = readl(base + CTRL_OFST); |
| width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT; |
| switch (width) { |
| case DDRCTL_EWDTH_16: |
| dt = DEV_X2; |
| break; |
| case DDRCTL_EWDTH_32: |
| dt = DEV_X4; |
| break; |
| case DDRCTL_EWDTH_64: |
| dt = DEV_X8; |
| break; |
| default: |
| dt = DEV_UNKNOWN; |
| } |
| |
| return dt; |
| } |
| |
| /** |
| * zynq_get_ecc_state - Return the controller ECC enable/disable status. |
| * @base: DDR memory controller base address. |
| * |
| * Get the ECC enable/disable status of the controller. |
| * |
| * Return: true if enabled, otherwise false. |
| */ |
| static bool zynq_get_ecc_state(void __iomem *base) |
| { |
| enum dev_type dt; |
| u32 ecctype; |
| |
| dt = zynq_get_dtype(base); |
| if (dt == DEV_UNKNOWN) |
| return false; |
| |
| ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK; |
| if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2)) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * zynqmp_get_ecc_state - Return the controller ECC enable/disable status. |
| * @base: DDR memory controller base address. |
| * |
| * Get the ECC enable/disable status for the controller. |
| * |
| * Return: a ECC status boolean i.e true/false - enabled/disabled. |
| */ |
| static bool zynqmp_get_ecc_state(void __iomem *base) |
| { |
| enum dev_type dt; |
| u32 ecctype; |
| |
| dt = zynqmp_get_dtype(base); |
| if (dt == DEV_UNKNOWN) |
| return false; |
| |
| ecctype = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK; |
| if ((ecctype == SCRUB_MODE_SECDED) && |
| ((dt == DEV_X2) || (dt == DEV_X4) || (dt == DEV_X8))) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * get_memsize - Read the size of the attached memory device. |
| * |
| * Return: the memory size in bytes. |
| */ |
| static u32 get_memsize(void) |
| { |
| struct sysinfo inf; |
| |
| si_meminfo(&inf); |
| |
| return inf.totalram * inf.mem_unit; |
| } |
| |
| /** |
| * zynq_get_mtype - Return the controller memory type. |
| * @base: Synopsys ECC status structure. |
| * |
| * Get the EDAC memory type appropriate for the current controller |
| * configuration. |
| * |
| * Return: a memory type enumeration. |
| */ |
| static enum mem_type zynq_get_mtype(const void __iomem *base) |
| { |
| enum mem_type mt; |
| u32 memtype; |
| |
| memtype = readl(base + T_ZQ_OFST); |
| |
| if (memtype & T_ZQ_DDRMODE_MASK) |
| mt = MEM_DDR3; |
| else |
| mt = MEM_DDR2; |
| |
| return mt; |
| } |
| |
| /** |
| * zynqmp_get_mtype - Returns controller memory type. |
| * @base: Synopsys ECC status structure. |
| * |
| * Get the EDAC memory type appropriate for the current controller |
| * configuration. |
| * |
| * Return: a memory type enumeration. |
| */ |
| static enum mem_type zynqmp_get_mtype(const void __iomem *base) |
| { |
| enum mem_type mt; |
| u32 memtype; |
| |
| memtype = readl(base + CTRL_OFST); |
| |
| if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3)) |
| mt = MEM_DDR3; |
| else if (memtype & MEM_TYPE_DDR2) |
| mt = MEM_RDDR2; |
| else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4)) |
| mt = MEM_DDR4; |
| else |
| mt = MEM_EMPTY; |
| |
| return mt; |
| } |
| |
| /** |
| * init_csrows - Initialize the csrow data. |
| * @mci: EDAC memory controller instance. |
| * |
| * Initialize the chip select rows associated with the EDAC memory |
| * controller instance. |
| */ |
| static void init_csrows(struct mem_ctl_info *mci) |
| { |
| struct synps_edac_priv *priv = mci->pvt_info; |
| const struct synps_platform_data *p_data; |
| struct csrow_info *csi; |
| struct dimm_info *dimm; |
| u32 size, row; |
| int j; |
| |
| p_data = priv->p_data; |
| |
| for (row = 0; row < mci->nr_csrows; row++) { |
| csi = mci->csrows[row]; |
| size = get_memsize(); |
| |
| for (j = 0; j < csi->nr_channels; j++) { |
| dimm = csi->channels[j]->dimm; |
| dimm->edac_mode = EDAC_SECDED; |
| dimm->mtype = p_data->get_mtype(priv->baseaddr); |
| dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; |
| dimm->grain = SYNPS_EDAC_ERR_GRAIN; |
| dimm->dtype = p_data->get_dtype(priv->baseaddr); |
| } |
| } |
| } |
| |
| /** |
| * mc_init - Initialize one driver instance. |
| * @mci: EDAC memory controller instance. |
| * @pdev: platform device. |
| * |
| * Perform initialization of the EDAC memory controller instance and |
| * related driver-private data associated with the memory controller the |
| * instance is bound to. |
| */ |
| static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev) |
| { |
| struct synps_edac_priv *priv; |
| |
| mci->pdev = &pdev->dev; |
| priv = mci->pvt_info; |
| platform_set_drvdata(pdev, mci); |
| |
| /* Initialize controller capabilities and configuration */ |
| mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2; |
| mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; |
| mci->scrub_cap = SCRUB_HW_SRC; |
| mci->scrub_mode = SCRUB_NONE; |
| |
| mci->edac_cap = EDAC_FLAG_SECDED; |
| mci->ctl_name = "synps_ddr_controller"; |
| mci->dev_name = SYNPS_EDAC_MOD_STRING; |
| mci->mod_name = SYNPS_EDAC_MOD_VER; |
| |
| if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { |
| edac_op_state = EDAC_OPSTATE_INT; |
| } else { |
| edac_op_state = EDAC_OPSTATE_POLL; |
| mci->edac_check = check_errors; |
| } |
| |
| mci->ctl_page_to_phys = NULL; |
| |
| init_csrows(mci); |
| } |
| |
| static int setup_irq(struct mem_ctl_info *mci, |
| struct platform_device *pdev) |
| { |
| struct synps_edac_priv *priv = mci->pvt_info; |
| int ret, irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| edac_printk(KERN_ERR, EDAC_MC, |
| "No IRQ %d in DT\n", irq); |
| return irq; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, intr_handler, |
| 0, dev_name(&pdev->dev), mci); |
| if (ret < 0) { |
| edac_printk(KERN_ERR, EDAC_MC, "Failed to request IRQ\n"); |
| return ret; |
| } |
| |
| enable_intr(priv); |
| |
| return 0; |
| } |
| |
| static const struct synps_platform_data zynq_edac_def = { |
| .get_error_info = zynq_get_error_info, |
| .get_mtype = zynq_get_mtype, |
| .get_dtype = zynq_get_dtype, |
| .get_ecc_state = zynq_get_ecc_state, |
| .quirks = 0, |
| }; |
| |
| static const struct synps_platform_data zynqmp_edac_def = { |
| .get_error_info = zynqmp_get_error_info, |
| .get_mtype = zynqmp_get_mtype, |
| .get_dtype = zynqmp_get_dtype, |
| .get_ecc_state = zynqmp_get_ecc_state, |
| .quirks = (DDR_ECC_INTR_SUPPORT |
| #ifdef CONFIG_EDAC_DEBUG |
| | DDR_ECC_DATA_POISON_SUPPORT |
| #endif |
| ), |
| }; |
| |
| static const struct synps_platform_data synopsys_edac_def = { |
| .get_error_info = zynqmp_get_error_info, |
| .get_mtype = zynqmp_get_mtype, |
| .get_dtype = zynqmp_get_dtype, |
| .get_ecc_state = zynqmp_get_ecc_state, |
| .quirks = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR |
| #ifdef CONFIG_EDAC_DEBUG |
| | DDR_ECC_DATA_POISON_SUPPORT |
| #endif |
| ), |
| }; |
| |
| |
| static const struct of_device_id synps_edac_match[] = { |
| { |
| .compatible = "xlnx,zynq-ddrc-a05", |
| .data = (void *)&zynq_edac_def |
| }, |
| { |
| .compatible = "xlnx,zynqmp-ddrc-2.40a", |
| .data = (void *)&zynqmp_edac_def |
| }, |
| { |
| .compatible = "snps,ddrc-3.80a", |
| .data = (void *)&synopsys_edac_def |
| }, |
| { |
| /* end of table */ |
| } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, synps_edac_match); |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| #define to_mci(k) container_of(k, struct mem_ctl_info, dev) |
| |
| /** |
| * ddr_poison_setup - Update poison registers. |
| * @priv: DDR memory controller private instance data. |
| * |
| * Update poison registers as per DDR mapping. |
| * Return: none. |
| */ |
| static void ddr_poison_setup(struct synps_edac_priv *priv) |
| { |
| int col = 0, row = 0, bank = 0, bankgrp = 0, rank = 0, regval; |
| int index; |
| ulong hif_addr = 0; |
| |
| hif_addr = priv->poison_addr >> 3; |
| |
| for (index = 0; index < DDR_MAX_ROW_SHIFT; index++) { |
| if (priv->row_shift[index]) |
| row |= (((hif_addr >> priv->row_shift[index]) & |
| BIT(0)) << index); |
| else |
| break; |
| } |
| |
| for (index = 0; index < DDR_MAX_COL_SHIFT; index++) { |
| if (priv->col_shift[index] || index < 3) |
| col |= (((hif_addr >> priv->col_shift[index]) & |
| BIT(0)) << index); |
| else |
| break; |
| } |
| |
| for (index = 0; index < DDR_MAX_BANK_SHIFT; index++) { |
| if (priv->bank_shift[index]) |
| bank |= (((hif_addr >> priv->bank_shift[index]) & |
| BIT(0)) << index); |
| else |
| break; |
| } |
| |
| for (index = 0; index < DDR_MAX_BANKGRP_SHIFT; index++) { |
| if (priv->bankgrp_shift[index]) |
| bankgrp |= (((hif_addr >> priv->bankgrp_shift[index]) |
| & BIT(0)) << index); |
| else |
| break; |
| } |
| |
| if (priv->rank_shift[0]) |
| rank = (hif_addr >> priv->rank_shift[0]) & BIT(0); |
| |
| regval = (rank << ECC_POISON0_RANK_SHIFT) & ECC_POISON0_RANK_MASK; |
| regval |= (col << ECC_POISON0_COLUMN_SHIFT) & ECC_POISON0_COLUMN_MASK; |
| writel(regval, priv->baseaddr + ECC_POISON0_OFST); |
| |
| regval = (bankgrp << ECC_POISON1_BG_SHIFT) & ECC_POISON1_BG_MASK; |
| regval |= (bank << ECC_POISON1_BANKNR_SHIFT) & ECC_POISON1_BANKNR_MASK; |
| regval |= (row << ECC_POISON1_ROW_SHIFT) & ECC_POISON1_ROW_MASK; |
| writel(regval, priv->baseaddr + ECC_POISON1_OFST); |
| } |
| |
| static ssize_t inject_data_error_show(struct device *dev, |
| struct device_attribute *mattr, |
| char *data) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct synps_edac_priv *priv = mci->pvt_info; |
| |
| return sprintf(data, "Poison0 Addr: 0x%08x\n\rPoison1 Addr: 0x%08x\n\r" |
| "Error injection Address: 0x%lx\n\r", |
| readl(priv->baseaddr + ECC_POISON0_OFST), |
| readl(priv->baseaddr + ECC_POISON1_OFST), |
| priv->poison_addr); |
| } |
| |
| static ssize_t inject_data_error_store(struct device *dev, |
| struct device_attribute *mattr, |
| const char *data, size_t count) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct synps_edac_priv *priv = mci->pvt_info; |
| |
| if (kstrtoul(data, 0, &priv->poison_addr)) |
| return -EINVAL; |
| |
| ddr_poison_setup(priv); |
| |
| return count; |
| } |
| |
| static ssize_t inject_data_poison_show(struct device *dev, |
| struct device_attribute *mattr, |
| char *data) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct synps_edac_priv *priv = mci->pvt_info; |
| |
| return sprintf(data, "Data Poisoning: %s\n\r", |
| (((readl(priv->baseaddr + ECC_CFG1_OFST)) & 0x3) == 0x3) |
| ? ("Correctable Error") : ("UnCorrectable Error")); |
| } |
| |
| static ssize_t inject_data_poison_store(struct device *dev, |
| struct device_attribute *mattr, |
| const char *data, size_t count) |
| { |
| struct mem_ctl_info *mci = to_mci(dev); |
| struct synps_edac_priv *priv = mci->pvt_info; |
| |
| writel(0, priv->baseaddr + DDRC_SWCTL); |
| if (strncmp(data, "CE", 2) == 0) |
| writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST); |
| else |
| writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST); |
| writel(1, priv->baseaddr + DDRC_SWCTL); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(inject_data_error); |
| static DEVICE_ATTR_RW(inject_data_poison); |
| |
| static int edac_create_sysfs_attributes(struct mem_ctl_info *mci) |
| { |
| int rc; |
| |
| rc = device_create_file(&mci->dev, &dev_attr_inject_data_error); |
| if (rc < 0) |
| return rc; |
| rc = device_create_file(&mci->dev, &dev_attr_inject_data_poison); |
| if (rc < 0) |
| return rc; |
| return 0; |
| } |
| |
| static void edac_remove_sysfs_attributes(struct mem_ctl_info *mci) |
| { |
| device_remove_file(&mci->dev, &dev_attr_inject_data_error); |
| device_remove_file(&mci->dev, &dev_attr_inject_data_poison); |
| } |
| |
| static void setup_row_address_map(struct synps_edac_priv *priv, u32 *addrmap) |
| { |
| u32 addrmap_row_b2_10; |
| int index; |
| |
| priv->row_shift[0] = (addrmap[5] & ROW_MAX_VAL_MASK) + ROW_B0_BASE; |
| priv->row_shift[1] = ((addrmap[5] >> 8) & |
| ROW_MAX_VAL_MASK) + ROW_B1_BASE; |
| |
| addrmap_row_b2_10 = (addrmap[5] >> 16) & ROW_MAX_VAL_MASK; |
| if (addrmap_row_b2_10 != ROW_MAX_VAL_MASK) { |
| for (index = 2; index < 11; index++) |
| priv->row_shift[index] = addrmap_row_b2_10 + |
| index + ROW_B0_BASE; |
| |
| } else { |
| priv->row_shift[2] = (addrmap[9] & |
| ROW_MAX_VAL_MASK) + ROW_B2_BASE; |
| priv->row_shift[3] = ((addrmap[9] >> 8) & |
| ROW_MAX_VAL_MASK) + ROW_B3_BASE; |
| priv->row_shift[4] = ((addrmap[9] >> 16) & |
| ROW_MAX_VAL_MASK) + ROW_B4_BASE; |
| priv->row_shift[5] = ((addrmap[9] >> 24) & |
| ROW_MAX_VAL_MASK) + ROW_B5_BASE; |
| priv->row_shift[6] = (addrmap[10] & |
| ROW_MAX_VAL_MASK) + ROW_B6_BASE; |
| priv->row_shift[7] = ((addrmap[10] >> 8) & |
| ROW_MAX_VAL_MASK) + ROW_B7_BASE; |
| priv->row_shift[8] = ((addrmap[10] >> 16) & |
| ROW_MAX_VAL_MASK) + ROW_B8_BASE; |
| priv->row_shift[9] = ((addrmap[10] >> 24) & |
| ROW_MAX_VAL_MASK) + ROW_B9_BASE; |
| priv->row_shift[10] = (addrmap[11] & |
| ROW_MAX_VAL_MASK) + ROW_B10_BASE; |
| } |
| |
| priv->row_shift[11] = (((addrmap[5] >> 24) & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : (((addrmap[5] >> 24) & |
| ROW_MAX_VAL_MASK) + ROW_B11_BASE); |
| priv->row_shift[12] = ((addrmap[6] & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : ((addrmap[6] & |
| ROW_MAX_VAL_MASK) + ROW_B12_BASE); |
| priv->row_shift[13] = (((addrmap[6] >> 8) & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 8) & |
| ROW_MAX_VAL_MASK) + ROW_B13_BASE); |
| priv->row_shift[14] = (((addrmap[6] >> 16) & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 16) & |
| ROW_MAX_VAL_MASK) + ROW_B14_BASE); |
| priv->row_shift[15] = (((addrmap[6] >> 24) & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 24) & |
| ROW_MAX_VAL_MASK) + ROW_B15_BASE); |
| priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] & |
| ROW_MAX_VAL_MASK) + ROW_B16_BASE); |
| priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) == |
| ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) & |
| ROW_MAX_VAL_MASK) + ROW_B17_BASE); |
| } |
| |
| static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap) |
| { |
| u32 width, memtype; |
| int index; |
| |
| memtype = readl(priv->baseaddr + CTRL_OFST); |
| width = (memtype & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT; |
| |
| priv->col_shift[0] = 0; |
| priv->col_shift[1] = 1; |
| priv->col_shift[2] = (addrmap[2] & COL_MAX_VAL_MASK) + COL_B2_BASE; |
| priv->col_shift[3] = ((addrmap[2] >> 8) & |
| COL_MAX_VAL_MASK) + COL_B3_BASE; |
| priv->col_shift[4] = (((addrmap[2] >> 16) & COL_MAX_VAL_MASK) == |
| COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 16) & |
| COL_MAX_VAL_MASK) + COL_B4_BASE); |
| priv->col_shift[5] = (((addrmap[2] >> 24) & COL_MAX_VAL_MASK) == |
| COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 24) & |
| COL_MAX_VAL_MASK) + COL_B5_BASE); |
| priv->col_shift[6] = ((addrmap[3] & COL_MAX_VAL_MASK) == |
| COL_MAX_VAL_MASK) ? 0 : ((addrmap[3] & |
| COL_MAX_VAL_MASK) + COL_B6_BASE); |
| priv->col_shift[7] = (((addrmap[3] >> 8) & COL_MAX_VAL_MASK) == |
| COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 8) & |
| COL_MAX_VAL_MASK) + COL_B7_BASE); |
| priv->col_shift[8] = (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) == |
| COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 16) & |
| COL_MAX_VAL_MASK) + COL_B8_BASE); |
| priv->col_shift[9] = (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) == |
| COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 24) & |
| COL_MAX_VAL_MASK) + COL_B9_BASE); |
| if (width == DDRCTL_EWDTH_64) { |
| if (memtype & MEM_TYPE_LPDDR3) { |
| priv->col_shift[10] = ((addrmap[4] & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| ((addrmap[4] & COL_MAX_VAL_MASK) + |
| COL_B10_BASE); |
| priv->col_shift[11] = (((addrmap[4] >> 8) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[4] >> 8) & COL_MAX_VAL_MASK) + |
| COL_B11_BASE); |
| } else { |
| priv->col_shift[11] = ((addrmap[4] & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| ((addrmap[4] & COL_MAX_VAL_MASK) + |
| COL_B10_BASE); |
| priv->col_shift[13] = (((addrmap[4] >> 8) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[4] >> 8) & COL_MAX_VAL_MASK) + |
| COL_B11_BASE); |
| } |
| } else if (width == DDRCTL_EWDTH_32) { |
| if (memtype & MEM_TYPE_LPDDR3) { |
| priv->col_shift[10] = (((addrmap[3] >> 24) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + |
| COL_B9_BASE); |
| priv->col_shift[11] = ((addrmap[4] & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| ((addrmap[4] & COL_MAX_VAL_MASK) + |
| COL_B10_BASE); |
| } else { |
| priv->col_shift[11] = (((addrmap[3] >> 24) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + |
| COL_B9_BASE); |
| priv->col_shift[13] = ((addrmap[4] & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| ((addrmap[4] & COL_MAX_VAL_MASK) + |
| COL_B10_BASE); |
| } |
| } else { |
| if (memtype & MEM_TYPE_LPDDR3) { |
| priv->col_shift[10] = (((addrmap[3] >> 16) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) + |
| COL_B8_BASE); |
| priv->col_shift[11] = (((addrmap[3] >> 24) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + |
| COL_B9_BASE); |
| priv->col_shift[13] = ((addrmap[4] & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| ((addrmap[4] & COL_MAX_VAL_MASK) + |
| COL_B10_BASE); |
| } else { |
| priv->col_shift[11] = (((addrmap[3] >> 16) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) + |
| COL_B8_BASE); |
| priv->col_shift[13] = (((addrmap[3] >> 24) & |
| COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : |
| (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + |
| COL_B9_BASE); |
| } |
| } |
| |
| if (width) { |
| for (index = 9; index > width; index--) { |
| priv->col_shift[index] = priv->col_shift[index - width]; |
| priv->col_shift[index - width] = 0; |
| } |
| } |
| |
| } |
| |
| static void setup_bank_address_map(struct synps_edac_priv *priv, u32 *addrmap) |
| { |
| priv->bank_shift[0] = (addrmap[1] & BANK_MAX_VAL_MASK) + BANK_B0_BASE; |
| priv->bank_shift[1] = ((addrmap[1] >> 8) & |
| BANK_MAX_VAL_MASK) + BANK_B1_BASE; |
| priv->bank_shift[2] = (((addrmap[1] >> 16) & |
| BANK_MAX_VAL_MASK) == BANK_MAX_VAL_MASK) ? 0 : |
| (((addrmap[1] >> 16) & BANK_MAX_VAL_MASK) + |
| BANK_B2_BASE); |
| |
| } |
| |
| static void setup_bg_address_map(struct synps_edac_priv *priv, u32 *addrmap) |
| { |
| priv->bankgrp_shift[0] = (addrmap[8] & |
| BANKGRP_MAX_VAL_MASK) + BANKGRP_B0_BASE; |
| priv->bankgrp_shift[1] = (((addrmap[8] >> 8) & BANKGRP_MAX_VAL_MASK) == |
| BANKGRP_MAX_VAL_MASK) ? 0 : (((addrmap[8] >> 8) |
| & BANKGRP_MAX_VAL_MASK) + BANKGRP_B1_BASE); |
| |
| } |
| |
| static void setup_rank_address_map(struct synps_edac_priv *priv, u32 *addrmap) |
| { |
| priv->rank_shift[0] = ((addrmap[0] & RANK_MAX_VAL_MASK) == |
| RANK_MAX_VAL_MASK) ? 0 : ((addrmap[0] & |
| RANK_MAX_VAL_MASK) + RANK_B0_BASE); |
| } |
| |
| /** |
| * setup_address_map - Set Address Map by querying ADDRMAP registers. |
| * @priv: DDR memory controller private instance data. |
| * |
| * Set Address Map by querying ADDRMAP registers. |
| * |
| * Return: none. |
| */ |
| static void setup_address_map(struct synps_edac_priv *priv) |
| { |
| u32 addrmap[12]; |
| int index; |
| |
| for (index = 0; index < 12; index++) { |
| u32 addrmap_offset; |
| |
| addrmap_offset = ECC_ADDRMAP0_OFFSET + (index * 4); |
| addrmap[index] = readl(priv->baseaddr + addrmap_offset); |
| } |
| |
| setup_row_address_map(priv, addrmap); |
| |
| setup_column_address_map(priv, addrmap); |
| |
| setup_bank_address_map(priv, addrmap); |
| |
| setup_bg_address_map(priv, addrmap); |
| |
| setup_rank_address_map(priv, addrmap); |
| } |
| #endif /* CONFIG_EDAC_DEBUG */ |
| |
| /** |
| * mc_probe - Check controller and bind driver. |
| * @pdev: platform device. |
| * |
| * Probe a specific controller instance for binding with the driver. |
| * |
| * Return: 0 if the controller instance was successfully bound to the |
| * driver; otherwise, < 0 on error. |
| */ |
| static int mc_probe(struct platform_device *pdev) |
| { |
| const struct synps_platform_data *p_data; |
| struct edac_mc_layer layers[2]; |
| struct synps_edac_priv *priv; |
| struct mem_ctl_info *mci; |
| void __iomem *baseaddr; |
| struct resource *res; |
| int rc; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| baseaddr = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(baseaddr)) |
| return PTR_ERR(baseaddr); |
| |
| p_data = of_device_get_match_data(&pdev->dev); |
| if (!p_data) |
| return -ENODEV; |
| |
| if (!p_data->get_ecc_state(baseaddr)) { |
| edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n"); |
| return -ENXIO; |
| } |
| |
| layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; |
| layers[0].size = SYNPS_EDAC_NR_CSROWS; |
| layers[0].is_virt_csrow = true; |
| layers[1].type = EDAC_MC_LAYER_CHANNEL; |
| layers[1].size = SYNPS_EDAC_NR_CHANS; |
| layers[1].is_virt_csrow = false; |
| |
| mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, |
| sizeof(struct synps_edac_priv)); |
| if (!mci) { |
| edac_printk(KERN_ERR, EDAC_MC, |
| "Failed memory allocation for mc instance\n"); |
| return -ENOMEM; |
| } |
| |
| priv = mci->pvt_info; |
| priv->baseaddr = baseaddr; |
| priv->p_data = p_data; |
| |
| mc_init(mci, pdev); |
| |
| if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { |
| rc = setup_irq(mci, pdev); |
| if (rc) |
| goto free_edac_mc; |
| } |
| |
| rc = edac_mc_add_mc(mci); |
| if (rc) { |
| edac_printk(KERN_ERR, EDAC_MC, |
| "Failed to register with EDAC core\n"); |
| goto free_edac_mc; |
| } |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) { |
| rc = edac_create_sysfs_attributes(mci); |
| if (rc) { |
| edac_printk(KERN_ERR, EDAC_MC, |
| "Failed to create sysfs entries\n"); |
| goto free_edac_mc; |
| } |
| } |
| |
| if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) |
| setup_address_map(priv); |
| #endif |
| |
| /* |
| * Start capturing the correctable and uncorrectable errors. A write of |
| * 0 starts the counters. |
| */ |
| if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)) |
| writel(0x0, baseaddr + ECC_CTRL_OFST); |
| |
| return rc; |
| |
| free_edac_mc: |
| edac_mc_free(mci); |
| |
| return rc; |
| } |
| |
| /** |
| * mc_remove - Unbind driver from controller. |
| * @pdev: Platform device. |
| * |
| * Return: Unconditionally 0 |
| */ |
| static int mc_remove(struct platform_device *pdev) |
| { |
| struct mem_ctl_info *mci = platform_get_drvdata(pdev); |
| struct synps_edac_priv *priv = mci->pvt_info; |
| |
| if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) |
| disable_intr(priv); |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) |
| edac_remove_sysfs_attributes(mci); |
| #endif |
| |
| edac_mc_del_mc(&pdev->dev); |
| edac_mc_free(mci); |
| |
| return 0; |
| } |
| |
| static struct platform_driver synps_edac_mc_driver = { |
| .driver = { |
| .name = "synopsys-edac", |
| .of_match_table = synps_edac_match, |
| }, |
| .probe = mc_probe, |
| .remove = mc_remove, |
| }; |
| |
| module_platform_driver(synps_edac_mc_driver); |
| |
| MODULE_AUTHOR("Xilinx Inc"); |
| MODULE_DESCRIPTION("Synopsys DDR ECC driver"); |
| MODULE_LICENSE("GPL v2"); |