drivers/pci/hotplug/acpi_pcihp.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Common ACPI functions for hot plug platforms
 *
 * Copyright (C) 2006 Intel Corporation
 *
 * All rights reserved.
 *
 * Send feedback to <kristen.c.accardi@intel.com>
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
#include <linux/slab.h>

#define MY_NAME	"acpi_pcihp"

#define dbg(fmt, arg...) do { if (debug_acpi) printk(KERN_DEBUG "%s: %s: " fmt, MY_NAME, __func__, ## arg); } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)

#define	METHOD_NAME__SUN	"_SUN"
#define	METHOD_NAME_OSHP	"OSHP"

static bool debug_acpi;

/* acpi_run_oshp - get control of hotplug from the firmware
 *
 * @handle - the handle of the hotplug controller.
 */
static acpi_status acpi_run_oshp(acpi_handle handle)
{
	acpi_status		status;
	struct acpi_buffer	string = { ACPI_ALLOCATE_BUFFER, NULL };

	acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);

	/* run OSHP */
	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
	if (ACPI_FAILURE(status))
		if (status != AE_NOT_FOUND)
			printk(KERN_ERR "%s:%s OSHP fails=0x%x\n",
			       __func__, (char *)string.pointer, status);
		else
			dbg("%s:%s OSHP not found\n",
			    __func__, (char *)string.pointer);
	else
		pr_debug("%s:%s OSHP passes\n", __func__,
			(char *)string.pointer);

	kfree(string.pointer);
	return status;
}

/**
 * acpi_get_hp_hw_control_from_firmware
 * @dev: the pci_dev of the bridge that has a hotplug controller
 *
 * Attempt to take hotplug control from firmware.
 */
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev)
{
	const struct pci_host_bridge *host;
	const struct acpi_pci_root *root;
	acpi_status status;
	acpi_handle chandle, handle;
	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };

	/*
	 * Per PCI firmware specification, we should run the ACPI _OSC
	 * method to get control of hotplug hardware before using it. If
	 * an _OSC is missing, we look for an OSHP to do the same thing.
	 * To handle different BIOS behavior, we look for _OSC on a root
	 * bridge preferentially (according to PCI fw spec). Later for
	 * OSHP within the scope of the hotplug controller and its parents,
	 * up to the host bridge under which this controller exists.
	 */
	if (shpchp_is_native(pdev))
		return 0;

	/* If _OSC exists, we should not evaluate OSHP */

	/*
	 * If there's no ACPI host bridge (i.e., ACPI support is compiled
	 * into the kernel but the hardware platform doesn't support ACPI),
	 * there's nothing to do here.
	 */
	host = pci_find_host_bridge(pdev->bus);
	root = acpi_pci_find_root(ACPI_HANDLE(&host->dev));
	if (!root)
		return 0;

	if (root->osc_support_set)
		goto no_control;

	handle = ACPI_HANDLE(&pdev->dev);
	if (!handle) {
		/*
		 * This hotplug controller was not listed in the ACPI name
		 * space at all. Try to get ACPI handle of parent PCI bus.
		 */
		struct pci_bus *pbus;
		for (pbus = pdev->bus; pbus; pbus = pbus->parent) {
			handle = acpi_pci_get_bridge_handle(pbus);
			if (handle)
				break;
		}
	}

	while (handle) {
		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
		pci_info(pdev, "Requesting control of SHPC hotplug via OSHP (%s)\n",
			 (char *)string.pointer);
		status = acpi_run_oshp(handle);
		if (ACPI_SUCCESS(status))
			goto got_one;
		if (acpi_is_root_bridge(handle))
			break;
		chandle = handle;
		status = acpi_get_parent(chandle, &handle);
		if (ACPI_FAILURE(status))
			break;
	}
no_control:
	pci_info(pdev, "Cannot get control of SHPC hotplug\n");
	kfree(string.pointer);
	return -ENODEV;
got_one:
	pci_info(pdev, "Gained control of SHPC hotplug (%s)\n",
		 (char *)string.pointer);
	kfree(string.pointer);
	return 0;
}
EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);

static int pcihp_is_ejectable(acpi_handle handle)
{
	acpi_status status;
	unsigned long long removable;
	if (!acpi_has_method(handle, "_ADR"))
		return 0;
	if (acpi_has_method(handle, "_EJ0"))
		return 1;
	status = acpi_evaluate_integer(handle, "_RMV", NULL, &removable);
	if (ACPI_SUCCESS(status) && removable)
		return 1;
	return 0;
}

/**
 * acpi_pcihp_check_ejectable - check if handle is ejectable ACPI PCI slot
 * @pbus: the PCI bus of the PCI slot corresponding to 'handle'
 * @handle: ACPI handle to check
 *
 * Return 1 if handle is ejectable PCI slot, 0 otherwise.
 */
int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle)
{
	acpi_handle bridge_handle, parent_handle;

	bridge_handle = acpi_pci_get_bridge_handle(pbus);
	if (!bridge_handle)
		return 0;
	if ((ACPI_FAILURE(acpi_get_parent(handle, &parent_handle))))
		return 0;
	if (bridge_handle != parent_handle)
		return 0;
	return pcihp_is_ejectable(handle);
}
EXPORT_SYMBOL_GPL(acpi_pci_check_ejectable);

static acpi_status
check_hotplug(acpi_handle handle, u32 lvl, void *context, void **rv)
{
	int *found = (int *)context;
	if (pcihp_is_ejectable(handle)) {
		*found = 1;
		return AE_CTRL_TERMINATE;
	}
	return AE_OK;
}

/**
 * acpi_pci_detect_ejectable - check if the PCI bus has ejectable slots
 * @handle - handle of the PCI bus to scan
 *
 * Returns 1 if the PCI bus has ACPI based ejectable slots, 0 otherwise.
 */
int acpi_pci_detect_ejectable(acpi_handle handle)
{
	int found = 0;

	if (!handle)
		return found;

	acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
			    check_hotplug, NULL, (void *)&found, NULL);
	return found;
}
EXPORT_SYMBOL_GPL(acpi_pci_detect_ejectable);

module_param(debug_acpi, bool, 0644);
MODULE_PARM_DESC(debug_acpi, "Debugging mode for ACPI enabled or not");