| /* |
| * Copyright (C) 2017 Sanechips Technology Co., Ltd. |
| * Copyright 2017 Linaro Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| |
| #include <media/rc-core.h> |
| |
| #define DRIVER_NAME "zx-irdec" |
| |
| #define ZX_IR_ENABLE 0x04 |
| #define ZX_IREN BIT(0) |
| #define ZX_IR_CTRL 0x08 |
| #define ZX_DEGL_MASK GENMASK(21, 20) |
| #define ZX_DEGL_VALUE(x) (((x) << 20) & ZX_DEGL_MASK) |
| #define ZX_WDBEGIN_MASK GENMASK(18, 8) |
| #define ZX_WDBEGIN_VALUE(x) (((x) << 8) & ZX_WDBEGIN_MASK) |
| #define ZX_IR_INTEN 0x10 |
| #define ZX_IR_INTSTCLR 0x14 |
| #define ZX_IR_CODE 0x30 |
| #define ZX_IR_CNUM 0x34 |
| #define ZX_NECRPT BIT(16) |
| |
| struct zx_irdec { |
| void __iomem *base; |
| struct rc_dev *rcd; |
| }; |
| |
| static void zx_irdec_set_mask(struct zx_irdec *irdec, unsigned int reg, |
| u32 mask, u32 value) |
| { |
| u32 data; |
| |
| data = readl(irdec->base + reg); |
| data &= ~mask; |
| data |= value & mask; |
| writel(data, irdec->base + reg); |
| } |
| |
| static irqreturn_t zx_irdec_irq(int irq, void *dev_id) |
| { |
| struct zx_irdec *irdec = dev_id; |
| u8 address, not_address; |
| u8 command, not_command; |
| u32 rawcode, scancode; |
| enum rc_proto rc_proto; |
| |
| /* Clear interrupt */ |
| writel(1, irdec->base + ZX_IR_INTSTCLR); |
| |
| /* Check repeat frame */ |
| if (readl(irdec->base + ZX_IR_CNUM) & ZX_NECRPT) { |
| rc_repeat(irdec->rcd); |
| goto done; |
| } |
| |
| rawcode = readl(irdec->base + ZX_IR_CODE); |
| not_command = (rawcode >> 24) & 0xff; |
| command = (rawcode >> 16) & 0xff; |
| not_address = (rawcode >> 8) & 0xff; |
| address = rawcode & 0xff; |
| |
| scancode = ir_nec_bytes_to_scancode(address, not_address, |
| command, not_command, |
| &rc_proto); |
| rc_keydown(irdec->rcd, rc_proto, scancode, 0); |
| |
| done: |
| return IRQ_HANDLED; |
| } |
| |
| static int zx_irdec_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct zx_irdec *irdec; |
| struct resource *res; |
| struct rc_dev *rcd; |
| int irq; |
| int ret; |
| |
| irdec = devm_kzalloc(dev, sizeof(*irdec), GFP_KERNEL); |
| if (!irdec) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irdec->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(irdec->base)) |
| return PTR_ERR(irdec->base); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| rcd = devm_rc_allocate_device(dev, RC_DRIVER_SCANCODE); |
| if (!rcd) { |
| dev_err(dev, "failed to allocate rc device\n"); |
| return -ENOMEM; |
| } |
| |
| irdec->rcd = rcd; |
| |
| rcd->priv = irdec; |
| rcd->input_phys = DRIVER_NAME "/input0"; |
| rcd->input_id.bustype = BUS_HOST; |
| rcd->map_name = RC_MAP_ZX_IRDEC; |
| rcd->allowed_protocols = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | |
| RC_PROTO_BIT_NEC32; |
| rcd->driver_name = DRIVER_NAME; |
| rcd->device_name = DRIVER_NAME; |
| |
| platform_set_drvdata(pdev, irdec); |
| |
| ret = devm_rc_register_device(dev, rcd); |
| if (ret) { |
| dev_err(dev, "failed to register rc device\n"); |
| return ret; |
| } |
| |
| ret = devm_request_irq(dev, irq, zx_irdec_irq, 0, NULL, irdec); |
| if (ret) { |
| dev_err(dev, "failed to request irq\n"); |
| return ret; |
| } |
| |
| /* |
| * Initialize deglitch level and watchdog counter beginner as |
| * recommended by vendor BSP code. |
| */ |
| zx_irdec_set_mask(irdec, ZX_IR_CTRL, ZX_DEGL_MASK, ZX_DEGL_VALUE(0)); |
| zx_irdec_set_mask(irdec, ZX_IR_CTRL, ZX_WDBEGIN_MASK, |
| ZX_WDBEGIN_VALUE(0x21c)); |
| |
| /* Enable interrupt */ |
| writel(1, irdec->base + ZX_IR_INTEN); |
| |
| /* Enable the decoder */ |
| zx_irdec_set_mask(irdec, ZX_IR_ENABLE, ZX_IREN, ZX_IREN); |
| |
| return 0; |
| } |
| |
| static int zx_irdec_remove(struct platform_device *pdev) |
| { |
| struct zx_irdec *irdec = platform_get_drvdata(pdev); |
| |
| /* Disable the decoder */ |
| zx_irdec_set_mask(irdec, ZX_IR_ENABLE, ZX_IREN, 0); |
| |
| /* Disable interrupt */ |
| writel(0, irdec->base + ZX_IR_INTEN); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id zx_irdec_match[] = { |
| { .compatible = "zte,zx296718-irdec" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, zx_irdec_match); |
| |
| static struct platform_driver zx_irdec_driver = { |
| .probe = zx_irdec_probe, |
| .remove = zx_irdec_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .of_match_table = zx_irdec_match, |
| }, |
| }; |
| module_platform_driver(zx_irdec_driver); |
| |
| MODULE_DESCRIPTION("ZTE ZX IR remote control driver"); |
| MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |