| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for the OV7251 camera sensor. |
| * |
| * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2017-2018, Linaro Ltd. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define OV7251_SC_MODE_SELECT 0x0100 |
| #define OV7251_SC_MODE_SELECT_SW_STANDBY 0x0 |
| #define OV7251_SC_MODE_SELECT_STREAMING 0x1 |
| |
| #define OV7251_CHIP_ID_HIGH 0x300a |
| #define OV7251_CHIP_ID_HIGH_BYTE 0x77 |
| #define OV7251_CHIP_ID_LOW 0x300b |
| #define OV7251_CHIP_ID_LOW_BYTE 0x50 |
| #define OV7251_SC_GP_IO_IN1 0x3029 |
| #define OV7251_AEC_EXPO_0 0x3500 |
| #define OV7251_AEC_EXPO_1 0x3501 |
| #define OV7251_AEC_EXPO_2 0x3502 |
| #define OV7251_AEC_AGC_ADJ_0 0x350a |
| #define OV7251_AEC_AGC_ADJ_1 0x350b |
| #define OV7251_TIMING_FORMAT1 0x3820 |
| #define OV7251_TIMING_FORMAT1_VFLIP BIT(2) |
| #define OV7251_TIMING_FORMAT2 0x3821 |
| #define OV7251_TIMING_FORMAT2_MIRROR BIT(2) |
| #define OV7251_PRE_ISP_00 0x5e00 |
| #define OV7251_PRE_ISP_00_TEST_PATTERN BIT(7) |
| |
| struct reg_value { |
| u16 reg; |
| u8 val; |
| }; |
| |
| struct ov7251_mode_info { |
| u32 width; |
| u32 height; |
| const struct reg_value *data; |
| u32 data_size; |
| u32 pixel_clock; |
| u32 link_freq; |
| u16 exposure_max; |
| u16 exposure_def; |
| struct v4l2_fract timeperframe; |
| }; |
| |
| struct ov7251 { |
| struct i2c_client *i2c_client; |
| struct device *dev; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_fwnode_endpoint ep; |
| struct v4l2_mbus_framefmt fmt; |
| struct v4l2_rect crop; |
| struct clk *xclk; |
| u32 xclk_freq; |
| |
| struct regulator *io_regulator; |
| struct regulator *core_regulator; |
| struct regulator *analog_regulator; |
| |
| const struct ov7251_mode_info *current_mode; |
| |
| struct v4l2_ctrl_handler ctrls; |
| struct v4l2_ctrl *pixel_clock; |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *gain; |
| |
| /* Cached register values */ |
| u8 aec_pk_manual; |
| u8 pre_isp_00; |
| u8 timing_format1; |
| u8 timing_format2; |
| |
| struct mutex lock; /* lock to protect power state, ctrls and mode */ |
| bool power_on; |
| |
| struct gpio_desc *enable_gpio; |
| }; |
| |
| static inline struct ov7251 *to_ov7251(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct ov7251, sd); |
| } |
| |
| static const struct reg_value ov7251_global_init_setting[] = { |
| { 0x0103, 0x01 }, |
| { 0x303b, 0x02 }, |
| }; |
| |
| static const struct reg_value ov7251_setting_vga_30fps[] = { |
| { 0x3005, 0x00 }, |
| { 0x3012, 0xc0 }, |
| { 0x3013, 0xd2 }, |
| { 0x3014, 0x04 }, |
| { 0x3016, 0xf0 }, |
| { 0x3017, 0xf0 }, |
| { 0x3018, 0xf0 }, |
| { 0x301a, 0xf0 }, |
| { 0x301b, 0xf0 }, |
| { 0x301c, 0xf0 }, |
| { 0x3023, 0x05 }, |
| { 0x3037, 0xf0 }, |
| { 0x3098, 0x04 }, /* pll2 pre divider */ |
| { 0x3099, 0x28 }, /* pll2 multiplier */ |
| { 0x309a, 0x05 }, /* pll2 sys divider */ |
| { 0x309b, 0x04 }, /* pll2 adc divider */ |
| { 0x309d, 0x00 }, /* pll2 divider */ |
| { 0x30b0, 0x0a }, /* pll1 pix divider */ |
| { 0x30b1, 0x01 }, /* pll1 divider */ |
| { 0x30b3, 0x64 }, /* pll1 multiplier */ |
| { 0x30b4, 0x03 }, /* pll1 pre divider */ |
| { 0x30b5, 0x05 }, /* pll1 mipi divider */ |
| { 0x3106, 0xda }, |
| { 0x3503, 0x07 }, |
| { 0x3509, 0x10 }, |
| { 0x3600, 0x1c }, |
| { 0x3602, 0x62 }, |
| { 0x3620, 0xb7 }, |
| { 0x3622, 0x04 }, |
| { 0x3626, 0x21 }, |
| { 0x3627, 0x30 }, |
| { 0x3630, 0x44 }, |
| { 0x3631, 0x35 }, |
| { 0x3634, 0x60 }, |
| { 0x3636, 0x00 }, |
| { 0x3662, 0x01 }, |
| { 0x3663, 0x70 }, |
| { 0x3664, 0x50 }, |
| { 0x3666, 0x0a }, |
| { 0x3669, 0x1a }, |
| { 0x366a, 0x00 }, |
| { 0x366b, 0x50 }, |
| { 0x3673, 0x01 }, |
| { 0x3674, 0xff }, |
| { 0x3675, 0x03 }, |
| { 0x3705, 0xc1 }, |
| { 0x3709, 0x40 }, |
| { 0x373c, 0x08 }, |
| { 0x3742, 0x00 }, |
| { 0x3757, 0xb3 }, |
| { 0x3788, 0x00 }, |
| { 0x37a8, 0x01 }, |
| { 0x37a9, 0xc0 }, |
| { 0x3800, 0x00 }, |
| { 0x3801, 0x04 }, |
| { 0x3802, 0x00 }, |
| { 0x3803, 0x04 }, |
| { 0x3804, 0x02 }, |
| { 0x3805, 0x8b }, |
| { 0x3806, 0x01 }, |
| { 0x3807, 0xeb }, |
| { 0x3808, 0x02 }, /* width high */ |
| { 0x3809, 0x80 }, /* width low */ |
| { 0x380a, 0x01 }, /* height high */ |
| { 0x380b, 0xe0 }, /* height low */ |
| { 0x380c, 0x03 }, /* total horiz timing high */ |
| { 0x380d, 0xa0 }, /* total horiz timing low */ |
| { 0x380e, 0x06 }, /* total vertical timing high */ |
| { 0x380f, 0xbc }, /* total vertical timing low */ |
| { 0x3810, 0x00 }, |
| { 0x3811, 0x04 }, |
| { 0x3812, 0x00 }, |
| { 0x3813, 0x05 }, |
| { 0x3814, 0x11 }, |
| { 0x3815, 0x11 }, |
| { 0x3820, 0x40 }, |
| { 0x3821, 0x00 }, |
| { 0x382f, 0x0e }, |
| { 0x3832, 0x00 }, |
| { 0x3833, 0x05 }, |
| { 0x3834, 0x00 }, |
| { 0x3835, 0x0c }, |
| { 0x3837, 0x00 }, |
| { 0x3b80, 0x00 }, |
| { 0x3b81, 0xa5 }, |
| { 0x3b82, 0x10 }, |
| { 0x3b83, 0x00 }, |
| { 0x3b84, 0x08 }, |
| { 0x3b85, 0x00 }, |
| { 0x3b86, 0x01 }, |
| { 0x3b87, 0x00 }, |
| { 0x3b88, 0x00 }, |
| { 0x3b89, 0x00 }, |
| { 0x3b8a, 0x00 }, |
| { 0x3b8b, 0x05 }, |
| { 0x3b8c, 0x00 }, |
| { 0x3b8d, 0x00 }, |
| { 0x3b8e, 0x00 }, |
| { 0x3b8f, 0x1a }, |
| { 0x3b94, 0x05 }, |
| { 0x3b95, 0xf2 }, |
| { 0x3b96, 0x40 }, |
| { 0x3c00, 0x89 }, |
| { 0x3c01, 0x63 }, |
| { 0x3c02, 0x01 }, |
| { 0x3c03, 0x00 }, |
| { 0x3c04, 0x00 }, |
| { 0x3c05, 0x03 }, |
| { 0x3c06, 0x00 }, |
| { 0x3c07, 0x06 }, |
| { 0x3c0c, 0x01 }, |
| { 0x3c0d, 0xd0 }, |
| { 0x3c0e, 0x02 }, |
| { 0x3c0f, 0x0a }, |
| { 0x4001, 0x42 }, |
| { 0x4004, 0x04 }, |
| { 0x4005, 0x00 }, |
| { 0x404e, 0x01 }, |
| { 0x4300, 0xff }, |
| { 0x4301, 0x00 }, |
| { 0x4315, 0x00 }, |
| { 0x4501, 0x48 }, |
| { 0x4600, 0x00 }, |
| { 0x4601, 0x4e }, |
| { 0x4801, 0x0f }, |
| { 0x4806, 0x0f }, |
| { 0x4819, 0xaa }, |
| { 0x4823, 0x3e }, |
| { 0x4837, 0x19 }, |
| { 0x4a0d, 0x00 }, |
| { 0x4a47, 0x7f }, |
| { 0x4a49, 0xf0 }, |
| { 0x4a4b, 0x30 }, |
| { 0x5000, 0x85 }, |
| { 0x5001, 0x80 }, |
| }; |
| |
| static const struct reg_value ov7251_setting_vga_60fps[] = { |
| { 0x3005, 0x00 }, |
| { 0x3012, 0xc0 }, |
| { 0x3013, 0xd2 }, |
| { 0x3014, 0x04 }, |
| { 0x3016, 0x10 }, |
| { 0x3017, 0x00 }, |
| { 0x3018, 0x00 }, |
| { 0x301a, 0x00 }, |
| { 0x301b, 0x00 }, |
| { 0x301c, 0x00 }, |
| { 0x3023, 0x05 }, |
| { 0x3037, 0xf0 }, |
| { 0x3098, 0x04 }, /* pll2 pre divider */ |
| { 0x3099, 0x28 }, /* pll2 multiplier */ |
| { 0x309a, 0x05 }, /* pll2 sys divider */ |
| { 0x309b, 0x04 }, /* pll2 adc divider */ |
| { 0x309d, 0x00 }, /* pll2 divider */ |
| { 0x30b0, 0x0a }, /* pll1 pix divider */ |
| { 0x30b1, 0x01 }, /* pll1 divider */ |
| { 0x30b3, 0x64 }, /* pll1 multiplier */ |
| { 0x30b4, 0x03 }, /* pll1 pre divider */ |
| { 0x30b5, 0x05 }, /* pll1 mipi divider */ |
| { 0x3106, 0xda }, |
| { 0x3503, 0x07 }, |
| { 0x3509, 0x10 }, |
| { 0x3600, 0x1c }, |
| { 0x3602, 0x62 }, |
| { 0x3620, 0xb7 }, |
| { 0x3622, 0x04 }, |
| { 0x3626, 0x21 }, |
| { 0x3627, 0x30 }, |
| { 0x3630, 0x44 }, |
| { 0x3631, 0x35 }, |
| { 0x3634, 0x60 }, |
| { 0x3636, 0x00 }, |
| { 0x3662, 0x01 }, |
| { 0x3663, 0x70 }, |
| { 0x3664, 0x50 }, |
| { 0x3666, 0x0a }, |
| { 0x3669, 0x1a }, |
| { 0x366a, 0x00 }, |
| { 0x366b, 0x50 }, |
| { 0x3673, 0x01 }, |
| { 0x3674, 0xff }, |
| { 0x3675, 0x03 }, |
| { 0x3705, 0xc1 }, |
| { 0x3709, 0x40 }, |
| { 0x373c, 0x08 }, |
| { 0x3742, 0x00 }, |
| { 0x3757, 0xb3 }, |
| { 0x3788, 0x00 }, |
| { 0x37a8, 0x01 }, |
| { 0x37a9, 0xc0 }, |
| { 0x3800, 0x00 }, |
| { 0x3801, 0x04 }, |
| { 0x3802, 0x00 }, |
| { 0x3803, 0x04 }, |
| { 0x3804, 0x02 }, |
| { 0x3805, 0x8b }, |
| { 0x3806, 0x01 }, |
| { 0x3807, 0xeb }, |
| { 0x3808, 0x02 }, /* width high */ |
| { 0x3809, 0x80 }, /* width low */ |
| { 0x380a, 0x01 }, /* height high */ |
| { 0x380b, 0xe0 }, /* height low */ |
| { 0x380c, 0x03 }, /* total horiz timing high */ |
| { 0x380d, 0xa0 }, /* total horiz timing low */ |
| { 0x380e, 0x03 }, /* total vertical timing high */ |
| { 0x380f, 0x5c }, /* total vertical timing low */ |
| { 0x3810, 0x00 }, |
| { 0x3811, 0x04 }, |
| { 0x3812, 0x00 }, |
| { 0x3813, 0x05 }, |
| { 0x3814, 0x11 }, |
| { 0x3815, 0x11 }, |
| { 0x3820, 0x40 }, |
| { 0x3821, 0x00 }, |
| { 0x382f, 0x0e }, |
| { 0x3832, 0x00 }, |
| { 0x3833, 0x05 }, |
| { 0x3834, 0x00 }, |
| { 0x3835, 0x0c }, |
| { 0x3837, 0x00 }, |
| { 0x3b80, 0x00 }, |
| { 0x3b81, 0xa5 }, |
| { 0x3b82, 0x10 }, |
| { 0x3b83, 0x00 }, |
| { 0x3b84, 0x08 }, |
| { 0x3b85, 0x00 }, |
| { 0x3b86, 0x01 }, |
| { 0x3b87, 0x00 }, |
| { 0x3b88, 0x00 }, |
| { 0x3b89, 0x00 }, |
| { 0x3b8a, 0x00 }, |
| { 0x3b8b, 0x05 }, |
| { 0x3b8c, 0x00 }, |
| { 0x3b8d, 0x00 }, |
| { 0x3b8e, 0x00 }, |
| { 0x3b8f, 0x1a }, |
| { 0x3b94, 0x05 }, |
| { 0x3b95, 0xf2 }, |
| { 0x3b96, 0x40 }, |
| { 0x3c00, 0x89 }, |
| { 0x3c01, 0x63 }, |
| { 0x3c02, 0x01 }, |
| { 0x3c03, 0x00 }, |
| { 0x3c04, 0x00 }, |
| { 0x3c05, 0x03 }, |
| { 0x3c06, 0x00 }, |
| { 0x3c07, 0x06 }, |
| { 0x3c0c, 0x01 }, |
| { 0x3c0d, 0xd0 }, |
| { 0x3c0e, 0x02 }, |
| { 0x3c0f, 0x0a }, |
| { 0x4001, 0x42 }, |
| { 0x4004, 0x04 }, |
| { 0x4005, 0x00 }, |
| { 0x404e, 0x01 }, |
| { 0x4300, 0xff }, |
| { 0x4301, 0x00 }, |
| { 0x4315, 0x00 }, |
| { 0x4501, 0x48 }, |
| { 0x4600, 0x00 }, |
| { 0x4601, 0x4e }, |
| { 0x4801, 0x0f }, |
| { 0x4806, 0x0f }, |
| { 0x4819, 0xaa }, |
| { 0x4823, 0x3e }, |
| { 0x4837, 0x19 }, |
| { 0x4a0d, 0x00 }, |
| { 0x4a47, 0x7f }, |
| { 0x4a49, 0xf0 }, |
| { 0x4a4b, 0x30 }, |
| { 0x5000, 0x85 }, |
| { 0x5001, 0x80 }, |
| }; |
| |
| static const struct reg_value ov7251_setting_vga_90fps[] = { |
| { 0x3005, 0x00 }, |
| { 0x3012, 0xc0 }, |
| { 0x3013, 0xd2 }, |
| { 0x3014, 0x04 }, |
| { 0x3016, 0x10 }, |
| { 0x3017, 0x00 }, |
| { 0x3018, 0x00 }, |
| { 0x301a, 0x00 }, |
| { 0x301b, 0x00 }, |
| { 0x301c, 0x00 }, |
| { 0x3023, 0x05 }, |
| { 0x3037, 0xf0 }, |
| { 0x3098, 0x04 }, /* pll2 pre divider */ |
| { 0x3099, 0x28 }, /* pll2 multiplier */ |
| { 0x309a, 0x05 }, /* pll2 sys divider */ |
| { 0x309b, 0x04 }, /* pll2 adc divider */ |
| { 0x309d, 0x00 }, /* pll2 divider */ |
| { 0x30b0, 0x0a }, /* pll1 pix divider */ |
| { 0x30b1, 0x01 }, /* pll1 divider */ |
| { 0x30b3, 0x64 }, /* pll1 multiplier */ |
| { 0x30b4, 0x03 }, /* pll1 pre divider */ |
| { 0x30b5, 0x05 }, /* pll1 mipi divider */ |
| { 0x3106, 0xda }, |
| { 0x3503, 0x07 }, |
| { 0x3509, 0x10 }, |
| { 0x3600, 0x1c }, |
| { 0x3602, 0x62 }, |
| { 0x3620, 0xb7 }, |
| { 0x3622, 0x04 }, |
| { 0x3626, 0x21 }, |
| { 0x3627, 0x30 }, |
| { 0x3630, 0x44 }, |
| { 0x3631, 0x35 }, |
| { 0x3634, 0x60 }, |
| { 0x3636, 0x00 }, |
| { 0x3662, 0x01 }, |
| { 0x3663, 0x70 }, |
| { 0x3664, 0x50 }, |
| { 0x3666, 0x0a }, |
| { 0x3669, 0x1a }, |
| { 0x366a, 0x00 }, |
| { 0x366b, 0x50 }, |
| { 0x3673, 0x01 }, |
| { 0x3674, 0xff }, |
| { 0x3675, 0x03 }, |
| { 0x3705, 0xc1 }, |
| { 0x3709, 0x40 }, |
| { 0x373c, 0x08 }, |
| { 0x3742, 0x00 }, |
| { 0x3757, 0xb3 }, |
| { 0x3788, 0x00 }, |
| { 0x37a8, 0x01 }, |
| { 0x37a9, 0xc0 }, |
| { 0x3800, 0x00 }, |
| { 0x3801, 0x04 }, |
| { 0x3802, 0x00 }, |
| { 0x3803, 0x04 }, |
| { 0x3804, 0x02 }, |
| { 0x3805, 0x8b }, |
| { 0x3806, 0x01 }, |
| { 0x3807, 0xeb }, |
| { 0x3808, 0x02 }, /* width high */ |
| { 0x3809, 0x80 }, /* width low */ |
| { 0x380a, 0x01 }, /* height high */ |
| { 0x380b, 0xe0 }, /* height low */ |
| { 0x380c, 0x03 }, /* total horiz timing high */ |
| { 0x380d, 0xa0 }, /* total horiz timing low */ |
| { 0x380e, 0x02 }, /* total vertical timing high */ |
| { 0x380f, 0x3c }, /* total vertical timing low */ |
| { 0x3810, 0x00 }, |
| { 0x3811, 0x04 }, |
| { 0x3812, 0x00 }, |
| { 0x3813, 0x05 }, |
| { 0x3814, 0x11 }, |
| { 0x3815, 0x11 }, |
| { 0x3820, 0x40 }, |
| { 0x3821, 0x00 }, |
| { 0x382f, 0x0e }, |
| { 0x3832, 0x00 }, |
| { 0x3833, 0x05 }, |
| { 0x3834, 0x00 }, |
| { 0x3835, 0x0c }, |
| { 0x3837, 0x00 }, |
| { 0x3b80, 0x00 }, |
| { 0x3b81, 0xa5 }, |
| { 0x3b82, 0x10 }, |
| { 0x3b83, 0x00 }, |
| { 0x3b84, 0x08 }, |
| { 0x3b85, 0x00 }, |
| { 0x3b86, 0x01 }, |
| { 0x3b87, 0x00 }, |
| { 0x3b88, 0x00 }, |
| { 0x3b89, 0x00 }, |
| { 0x3b8a, 0x00 }, |
| { 0x3b8b, 0x05 }, |
| { 0x3b8c, 0x00 }, |
| { 0x3b8d, 0x00 }, |
| { 0x3b8e, 0x00 }, |
| { 0x3b8f, 0x1a }, |
| { 0x3b94, 0x05 }, |
| { 0x3b95, 0xf2 }, |
| { 0x3b96, 0x40 }, |
| { 0x3c00, 0x89 }, |
| { 0x3c01, 0x63 }, |
| { 0x3c02, 0x01 }, |
| { 0x3c03, 0x00 }, |
| { 0x3c04, 0x00 }, |
| { 0x3c05, 0x03 }, |
| { 0x3c06, 0x00 }, |
| { 0x3c07, 0x06 }, |
| { 0x3c0c, 0x01 }, |
| { 0x3c0d, 0xd0 }, |
| { 0x3c0e, 0x02 }, |
| { 0x3c0f, 0x0a }, |
| { 0x4001, 0x42 }, |
| { 0x4004, 0x04 }, |
| { 0x4005, 0x00 }, |
| { 0x404e, 0x01 }, |
| { 0x4300, 0xff }, |
| { 0x4301, 0x00 }, |
| { 0x4315, 0x00 }, |
| { 0x4501, 0x48 }, |
| { 0x4600, 0x00 }, |
| { 0x4601, 0x4e }, |
| { 0x4801, 0x0f }, |
| { 0x4806, 0x0f }, |
| { 0x4819, 0xaa }, |
| { 0x4823, 0x3e }, |
| { 0x4837, 0x19 }, |
| { 0x4a0d, 0x00 }, |
| { 0x4a47, 0x7f }, |
| { 0x4a49, 0xf0 }, |
| { 0x4a4b, 0x30 }, |
| { 0x5000, 0x85 }, |
| { 0x5001, 0x80 }, |
| }; |
| |
| static const s64 link_freq[] = { |
| 240000000, |
| }; |
| |
| static const struct ov7251_mode_info ov7251_mode_info_data[] = { |
| { |
| .width = 640, |
| .height = 480, |
| .data = ov7251_setting_vga_30fps, |
| .data_size = ARRAY_SIZE(ov7251_setting_vga_30fps), |
| .pixel_clock = 48000000, |
| .link_freq = 0, /* an index in link_freq[] */ |
| .exposure_max = 1704, |
| .exposure_def = 504, |
| .timeperframe = { |
| .numerator = 100, |
| .denominator = 3000 |
| } |
| }, |
| { |
| .width = 640, |
| .height = 480, |
| .data = ov7251_setting_vga_60fps, |
| .data_size = ARRAY_SIZE(ov7251_setting_vga_60fps), |
| .pixel_clock = 48000000, |
| .link_freq = 0, /* an index in link_freq[] */ |
| .exposure_max = 840, |
| .exposure_def = 504, |
| .timeperframe = { |
| .numerator = 100, |
| .denominator = 6014 |
| } |
| }, |
| { |
| .width = 640, |
| .height = 480, |
| .data = ov7251_setting_vga_90fps, |
| .data_size = ARRAY_SIZE(ov7251_setting_vga_90fps), |
| .pixel_clock = 48000000, |
| .link_freq = 0, /* an index in link_freq[] */ |
| .exposure_max = 552, |
| .exposure_def = 504, |
| .timeperframe = { |
| .numerator = 100, |
| .denominator = 9043 |
| } |
| }, |
| }; |
| |
| static int ov7251_regulators_enable(struct ov7251 *ov7251) |
| { |
| int ret; |
| |
| /* OV7251 power up sequence requires core regulator |
| * to be enabled not earlier than io regulator |
| */ |
| |
| ret = regulator_enable(ov7251->io_regulator); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "set io voltage failed\n"); |
| return ret; |
| } |
| |
| ret = regulator_enable(ov7251->analog_regulator); |
| if (ret) { |
| dev_err(ov7251->dev, "set analog voltage failed\n"); |
| goto err_disable_io; |
| } |
| |
| ret = regulator_enable(ov7251->core_regulator); |
| if (ret) { |
| dev_err(ov7251->dev, "set core voltage failed\n"); |
| goto err_disable_analog; |
| } |
| |
| return 0; |
| |
| err_disable_analog: |
| regulator_disable(ov7251->analog_regulator); |
| |
| err_disable_io: |
| regulator_disable(ov7251->io_regulator); |
| |
| return ret; |
| } |
| |
| static void ov7251_regulators_disable(struct ov7251 *ov7251) |
| { |
| int ret; |
| |
| ret = regulator_disable(ov7251->core_regulator); |
| if (ret < 0) |
| dev_err(ov7251->dev, "core regulator disable failed\n"); |
| |
| ret = regulator_disable(ov7251->analog_regulator); |
| if (ret < 0) |
| dev_err(ov7251->dev, "analog regulator disable failed\n"); |
| |
| ret = regulator_disable(ov7251->io_regulator); |
| if (ret < 0) |
| dev_err(ov7251->dev, "io regulator disable failed\n"); |
| } |
| |
| static int ov7251_write_reg(struct ov7251 *ov7251, u16 reg, u8 val) |
| { |
| u8 regbuf[3]; |
| int ret; |
| |
| regbuf[0] = reg >> 8; |
| regbuf[1] = reg & 0xff; |
| regbuf[2] = val; |
| |
| ret = i2c_master_send(ov7251->i2c_client, regbuf, 3); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "%s: write reg error %d: reg=%x, val=%x\n", |
| __func__, ret, reg, val); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ov7251_write_seq_regs(struct ov7251 *ov7251, u16 reg, u8 *val, |
| u8 num) |
| { |
| u8 regbuf[5]; |
| u8 nregbuf = sizeof(reg) + num * sizeof(*val); |
| int ret = 0; |
| |
| if (nregbuf > sizeof(regbuf)) |
| return -EINVAL; |
| |
| regbuf[0] = reg >> 8; |
| regbuf[1] = reg & 0xff; |
| |
| memcpy(regbuf + 2, val, num); |
| |
| ret = i2c_master_send(ov7251->i2c_client, regbuf, nregbuf); |
| if (ret < 0) { |
| dev_err(ov7251->dev, |
| "%s: write seq regs error %d: first reg=%x\n", |
| __func__, ret, reg); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ov7251_read_reg(struct ov7251 *ov7251, u16 reg, u8 *val) |
| { |
| u8 regbuf[2]; |
| int ret; |
| |
| regbuf[0] = reg >> 8; |
| regbuf[1] = reg & 0xff; |
| |
| ret = i2c_master_send(ov7251->i2c_client, regbuf, 2); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "%s: write reg error %d: reg=%x\n", |
| __func__, ret, reg); |
| return ret; |
| } |
| |
| ret = i2c_master_recv(ov7251->i2c_client, val, 1); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "%s: read reg error %d: reg=%x\n", |
| __func__, ret, reg); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ov7251_set_exposure(struct ov7251 *ov7251, s32 exposure) |
| { |
| u16 reg; |
| u8 val[3]; |
| |
| reg = OV7251_AEC_EXPO_0; |
| val[0] = (exposure & 0xf000) >> 12; /* goes to OV7251_AEC_EXPO_0 */ |
| val[1] = (exposure & 0x0ff0) >> 4; /* goes to OV7251_AEC_EXPO_1 */ |
| val[2] = (exposure & 0x000f) << 4; /* goes to OV7251_AEC_EXPO_2 */ |
| |
| return ov7251_write_seq_regs(ov7251, reg, val, 3); |
| } |
| |
| static int ov7251_set_gain(struct ov7251 *ov7251, s32 gain) |
| { |
| u16 reg; |
| u8 val[2]; |
| |
| reg = OV7251_AEC_AGC_ADJ_0; |
| val[0] = (gain & 0x0300) >> 8; /* goes to OV7251_AEC_AGC_ADJ_0 */ |
| val[1] = gain & 0xff; /* goes to OV7251_AEC_AGC_ADJ_1 */ |
| |
| return ov7251_write_seq_regs(ov7251, reg, val, 2); |
| } |
| |
| static int ov7251_set_register_array(struct ov7251 *ov7251, |
| const struct reg_value *settings, |
| unsigned int num_settings) |
| { |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < num_settings; ++i, ++settings) { |
| ret = ov7251_write_reg(ov7251, settings->reg, settings->val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ov7251_set_power_on(struct ov7251 *ov7251) |
| { |
| int ret; |
| u32 wait_us; |
| |
| ret = ov7251_regulators_enable(ov7251); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_prepare_enable(ov7251->xclk); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "clk prepare enable failed\n"); |
| ov7251_regulators_disable(ov7251); |
| return ret; |
| } |
| |
| gpiod_set_value_cansleep(ov7251->enable_gpio, 1); |
| |
| /* wait at least 65536 external clock cycles */ |
| wait_us = DIV_ROUND_UP(65536 * 1000, |
| DIV_ROUND_UP(ov7251->xclk_freq, 1000)); |
| usleep_range(wait_us, wait_us + 1000); |
| |
| return 0; |
| } |
| |
| static void ov7251_set_power_off(struct ov7251 *ov7251) |
| { |
| clk_disable_unprepare(ov7251->xclk); |
| gpiod_set_value_cansleep(ov7251->enable_gpio, 0); |
| ov7251_regulators_disable(ov7251); |
| } |
| |
| static int ov7251_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct ov7251 *ov7251 = to_ov7251(sd); |
| int ret = 0; |
| |
| mutex_lock(&ov7251->lock); |
| |
| /* If the power state is not modified - no work to do. */ |
| if (ov7251->power_on == !!on) |
| goto exit; |
| |
| if (on) { |
| ret = ov7251_set_power_on(ov7251); |
| if (ret < 0) |
| goto exit; |
| |
| ret = ov7251_set_register_array(ov7251, |
| ov7251_global_init_setting, |
| ARRAY_SIZE(ov7251_global_init_setting)); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "could not set init registers\n"); |
| ov7251_set_power_off(ov7251); |
| goto exit; |
| } |
| |
| ov7251->power_on = true; |
| } else { |
| ov7251_set_power_off(ov7251); |
| ov7251->power_on = false; |
| } |
| |
| exit: |
| mutex_unlock(&ov7251->lock); |
| |
| return ret; |
| } |
| |
| static int ov7251_set_hflip(struct ov7251 *ov7251, s32 value) |
| { |
| u8 val = ov7251->timing_format2; |
| int ret; |
| |
| if (value) |
| val |= OV7251_TIMING_FORMAT2_MIRROR; |
| else |
| val &= ~OV7251_TIMING_FORMAT2_MIRROR; |
| |
| ret = ov7251_write_reg(ov7251, OV7251_TIMING_FORMAT2, val); |
| if (!ret) |
| ov7251->timing_format2 = val; |
| |
| return ret; |
| } |
| |
| static int ov7251_set_vflip(struct ov7251 *ov7251, s32 value) |
| { |
| u8 val = ov7251->timing_format1; |
| int ret; |
| |
| if (value) |
| val |= OV7251_TIMING_FORMAT1_VFLIP; |
| else |
| val &= ~OV7251_TIMING_FORMAT1_VFLIP; |
| |
| ret = ov7251_write_reg(ov7251, OV7251_TIMING_FORMAT1, val); |
| if (!ret) |
| ov7251->timing_format1 = val; |
| |
| return ret; |
| } |
| |
| static int ov7251_set_test_pattern(struct ov7251 *ov7251, s32 value) |
| { |
| u8 val = ov7251->pre_isp_00; |
| int ret; |
| |
| if (value) |
| val |= OV7251_PRE_ISP_00_TEST_PATTERN; |
| else |
| val &= ~OV7251_PRE_ISP_00_TEST_PATTERN; |
| |
| ret = ov7251_write_reg(ov7251, OV7251_PRE_ISP_00, val); |
| if (!ret) |
| ov7251->pre_isp_00 = val; |
| |
| return ret; |
| } |
| |
| static const char * const ov7251_test_pattern_menu[] = { |
| "Disabled", |
| "Vertical Pattern Bars", |
| }; |
| |
| static int ov7251_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ov7251 *ov7251 = container_of(ctrl->handler, |
| struct ov7251, ctrls); |
| int ret; |
| |
| /* v4l2_ctrl_lock() locks our mutex */ |
| |
| if (!ov7251->power_on) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_EXPOSURE: |
| ret = ov7251_set_exposure(ov7251, ctrl->val); |
| break; |
| case V4L2_CID_GAIN: |
| ret = ov7251_set_gain(ov7251, ctrl->val); |
| break; |
| case V4L2_CID_TEST_PATTERN: |
| ret = ov7251_set_test_pattern(ov7251, ctrl->val); |
| break; |
| case V4L2_CID_HFLIP: |
| ret = ov7251_set_hflip(ov7251, ctrl->val); |
| break; |
| case V4L2_CID_VFLIP: |
| ret = ov7251_set_vflip(ov7251, ctrl->val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops ov7251_ctrl_ops = { |
| .s_ctrl = ov7251_s_ctrl, |
| }; |
| |
| static int ov7251_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = MEDIA_BUS_FMT_Y10_1X10; |
| |
| return 0; |
| } |
| |
| static int ov7251_enum_frame_size(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| if (fse->code != MEDIA_BUS_FMT_Y10_1X10) |
| return -EINVAL; |
| |
| if (fse->index >= ARRAY_SIZE(ov7251_mode_info_data)) |
| return -EINVAL; |
| |
| fse->min_width = ov7251_mode_info_data[fse->index].width; |
| fse->max_width = ov7251_mode_info_data[fse->index].width; |
| fse->min_height = ov7251_mode_info_data[fse->index].height; |
| fse->max_height = ov7251_mode_info_data[fse->index].height; |
| |
| return 0; |
| } |
| |
| static int ov7251_enum_frame_ival(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_interval_enum *fie) |
| { |
| unsigned int index = fie->index; |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ov7251_mode_info_data); i++) { |
| if (fie->width != ov7251_mode_info_data[i].width || |
| fie->height != ov7251_mode_info_data[i].height) |
| continue; |
| |
| if (index-- == 0) { |
| fie->interval = ov7251_mode_info_data[i].timeperframe; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static struct v4l2_mbus_framefmt * |
| __ov7251_get_pad_format(struct ov7251 *ov7251, |
| struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, |
| enum v4l2_subdev_format_whence which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_format(&ov7251->sd, cfg, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &ov7251->fmt; |
| default: |
| return NULL; |
| } |
| } |
| |
| static int ov7251_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct ov7251 *ov7251 = to_ov7251(sd); |
| |
| mutex_lock(&ov7251->lock); |
| format->format = *__ov7251_get_pad_format(ov7251, cfg, format->pad, |
| format->which); |
| mutex_unlock(&ov7251->lock); |
| |
| return 0; |
| } |
| |
| static struct v4l2_rect * |
| __ov7251_get_pad_crop(struct ov7251 *ov7251, struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, enum v4l2_subdev_format_whence which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_crop(&ov7251->sd, cfg, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &ov7251->crop; |
| default: |
| return NULL; |
| } |
| } |
| |
| static inline u32 avg_fps(const struct v4l2_fract *t) |
| { |
| return (t->denominator + (t->numerator >> 1)) / t->numerator; |
| } |
| |
| static const struct ov7251_mode_info * |
| ov7251_find_mode_by_ival(struct ov7251 *ov7251, struct v4l2_fract *timeperframe) |
| { |
| const struct ov7251_mode_info *mode = ov7251->current_mode; |
| unsigned int fps_req = avg_fps(timeperframe); |
| unsigned int max_dist_match = (unsigned int) -1; |
| unsigned int i, n = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(ov7251_mode_info_data); i++) { |
| unsigned int dist; |
| unsigned int fps_tmp; |
| |
| if (mode->width != ov7251_mode_info_data[i].width || |
| mode->height != ov7251_mode_info_data[i].height) |
| continue; |
| |
| fps_tmp = avg_fps(&ov7251_mode_info_data[i].timeperframe); |
| |
| dist = abs(fps_req - fps_tmp); |
| |
| if (dist < max_dist_match) { |
| n = i; |
| max_dist_match = dist; |
| } |
| } |
| |
| return &ov7251_mode_info_data[n]; |
| } |
| |
| static int ov7251_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *format) |
| { |
| struct ov7251 *ov7251 = to_ov7251(sd); |
| struct v4l2_mbus_framefmt *__format; |
| struct v4l2_rect *__crop; |
| const struct ov7251_mode_info *new_mode; |
| int ret = 0; |
| |
| mutex_lock(&ov7251->lock); |
| |
| __crop = __ov7251_get_pad_crop(ov7251, cfg, format->pad, format->which); |
| |
| new_mode = v4l2_find_nearest_size(ov7251_mode_info_data, |
| ARRAY_SIZE(ov7251_mode_info_data), |
| width, height, |
| format->format.width, format->format.height); |
| |
| __crop->width = new_mode->width; |
| __crop->height = new_mode->height; |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { |
| ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock, |
| new_mode->pixel_clock); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq, |
| new_mode->link_freq); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_modify_range(ov7251->exposure, |
| 1, new_mode->exposure_max, |
| 1, new_mode->exposure_def); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_s_ctrl(ov7251->exposure, |
| new_mode->exposure_def); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_s_ctrl(ov7251->gain, 16); |
| if (ret < 0) |
| goto exit; |
| |
| ov7251->current_mode = new_mode; |
| } |
| |
| __format = __ov7251_get_pad_format(ov7251, cfg, format->pad, |
| format->which); |
| __format->width = __crop->width; |
| __format->height = __crop->height; |
| __format->code = MEDIA_BUS_FMT_Y10_1X10; |
| __format->field = V4L2_FIELD_NONE; |
| __format->colorspace = V4L2_COLORSPACE_SRGB; |
| __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace); |
| __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, |
| __format->colorspace, __format->ycbcr_enc); |
| __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace); |
| |
| format->format = *__format; |
| |
| exit: |
| mutex_unlock(&ov7251->lock); |
| |
| return ret; |
| } |
| |
| static int ov7251_entity_init_cfg(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg) |
| { |
| struct v4l2_subdev_format fmt = { |
| .which = cfg ? V4L2_SUBDEV_FORMAT_TRY |
| : V4L2_SUBDEV_FORMAT_ACTIVE, |
| .format = { |
| .width = 640, |
| .height = 480 |
| } |
| }; |
| |
| ov7251_set_format(subdev, cfg, &fmt); |
| |
| return 0; |
| } |
| |
| static int ov7251_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct ov7251 *ov7251 = to_ov7251(sd); |
| |
| if (sel->target != V4L2_SEL_TGT_CROP) |
| return -EINVAL; |
| |
| mutex_lock(&ov7251->lock); |
| sel->r = *__ov7251_get_pad_crop(ov7251, cfg, sel->pad, |
| sel->which); |
| mutex_unlock(&ov7251->lock); |
| |
| return 0; |
| } |
| |
| static int ov7251_s_stream(struct v4l2_subdev *subdev, int enable) |
| { |
| struct ov7251 *ov7251 = to_ov7251(subdev); |
| int ret; |
| |
| mutex_lock(&ov7251->lock); |
| |
| if (enable) { |
| ret = ov7251_set_register_array(ov7251, |
| ov7251->current_mode->data, |
| ov7251->current_mode->data_size); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "could not set mode %dx%d\n", |
| ov7251->current_mode->width, |
| ov7251->current_mode->height); |
| goto exit; |
| } |
| ret = __v4l2_ctrl_handler_setup(&ov7251->ctrls); |
| if (ret < 0) { |
| dev_err(ov7251->dev, "could not sync v4l2 controls\n"); |
| goto exit; |
| } |
| ret = ov7251_write_reg(ov7251, OV7251_SC_MODE_SELECT, |
| OV7251_SC_MODE_SELECT_STREAMING); |
| } else { |
| ret = ov7251_write_reg(ov7251, OV7251_SC_MODE_SELECT, |
| OV7251_SC_MODE_SELECT_SW_STANDBY); |
| } |
| |
| exit: |
| mutex_unlock(&ov7251->lock); |
| |
| return ret; |
| } |
| |
| static int ov7251_get_frame_interval(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_frame_interval *fi) |
| { |
| struct ov7251 *ov7251 = to_ov7251(subdev); |
| |
| mutex_lock(&ov7251->lock); |
| fi->interval = ov7251->current_mode->timeperframe; |
| mutex_unlock(&ov7251->lock); |
| |
| return 0; |
| } |
| |
| static int ov7251_set_frame_interval(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_frame_interval *fi) |
| { |
| struct ov7251 *ov7251 = to_ov7251(subdev); |
| const struct ov7251_mode_info *new_mode; |
| int ret = 0; |
| |
| mutex_lock(&ov7251->lock); |
| new_mode = ov7251_find_mode_by_ival(ov7251, &fi->interval); |
| |
| if (new_mode != ov7251->current_mode) { |
| ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock, |
| new_mode->pixel_clock); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq, |
| new_mode->link_freq); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_modify_range(ov7251->exposure, |
| 1, new_mode->exposure_max, |
| 1, new_mode->exposure_def); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_s_ctrl(ov7251->exposure, |
| new_mode->exposure_def); |
| if (ret < 0) |
| goto exit; |
| |
| ret = __v4l2_ctrl_s_ctrl(ov7251->gain, 16); |
| if (ret < 0) |
| goto exit; |
| |
| ov7251->current_mode = new_mode; |
| } |
| |
| fi->interval = ov7251->current_mode->timeperframe; |
| |
| exit: |
| mutex_unlock(&ov7251->lock); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_core_ops ov7251_core_ops = { |
| .s_power = ov7251_s_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops ov7251_video_ops = { |
| .s_stream = ov7251_s_stream, |
| .g_frame_interval = ov7251_get_frame_interval, |
| .s_frame_interval = ov7251_set_frame_interval, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops ov7251_subdev_pad_ops = { |
| .init_cfg = ov7251_entity_init_cfg, |
| .enum_mbus_code = ov7251_enum_mbus_code, |
| .enum_frame_size = ov7251_enum_frame_size, |
| .enum_frame_interval = ov7251_enum_frame_ival, |
| .get_fmt = ov7251_get_format, |
| .set_fmt = ov7251_set_format, |
| .get_selection = ov7251_get_selection, |
| }; |
| |
| static const struct v4l2_subdev_ops ov7251_subdev_ops = { |
| .core = &ov7251_core_ops, |
| .video = &ov7251_video_ops, |
| .pad = &ov7251_subdev_pad_ops, |
| }; |
| |
| static int ov7251_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct fwnode_handle *endpoint; |
| struct ov7251 *ov7251; |
| u8 chip_id_high, chip_id_low, chip_rev; |
| int ret; |
| |
| ov7251 = devm_kzalloc(dev, sizeof(struct ov7251), GFP_KERNEL); |
| if (!ov7251) |
| return -ENOMEM; |
| |
| ov7251->i2c_client = client; |
| ov7251->dev = dev; |
| |
| endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); |
| if (!endpoint) { |
| dev_err(dev, "endpoint node not found\n"); |
| return -EINVAL; |
| } |
| |
| ret = v4l2_fwnode_endpoint_parse(endpoint, &ov7251->ep); |
| fwnode_handle_put(endpoint); |
| if (ret < 0) { |
| dev_err(dev, "parsing endpoint node failed\n"); |
| return ret; |
| } |
| |
| if (ov7251->ep.bus_type != V4L2_MBUS_CSI2) { |
| dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n", |
| ov7251->ep.bus_type, V4L2_MBUS_CSI2); |
| return -EINVAL; |
| } |
| |
| /* get system clock (xclk) */ |
| ov7251->xclk = devm_clk_get(dev, "xclk"); |
| if (IS_ERR(ov7251->xclk)) { |
| dev_err(dev, "could not get xclk"); |
| return PTR_ERR(ov7251->xclk); |
| } |
| |
| ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency", |
| &ov7251->xclk_freq); |
| if (ret) { |
| dev_err(dev, "could not get xclk frequency\n"); |
| return ret; |
| } |
| |
| /* external clock must be 24MHz, allow 1% tolerance */ |
| if (ov7251->xclk_freq < 23760000 || ov7251->xclk_freq > 24240000) { |
| dev_err(dev, "external clock frequency %u is not supported\n", |
| ov7251->xclk_freq); |
| return -EINVAL; |
| } |
| |
| ret = clk_set_rate(ov7251->xclk, ov7251->xclk_freq); |
| if (ret) { |
| dev_err(dev, "could not set xclk frequency\n"); |
| return ret; |
| } |
| |
| ov7251->io_regulator = devm_regulator_get(dev, "vdddo"); |
| if (IS_ERR(ov7251->io_regulator)) { |
| dev_err(dev, "cannot get io regulator\n"); |
| return PTR_ERR(ov7251->io_regulator); |
| } |
| |
| ov7251->core_regulator = devm_regulator_get(dev, "vddd"); |
| if (IS_ERR(ov7251->core_regulator)) { |
| dev_err(dev, "cannot get core regulator\n"); |
| return PTR_ERR(ov7251->core_regulator); |
| } |
| |
| ov7251->analog_regulator = devm_regulator_get(dev, "vdda"); |
| if (IS_ERR(ov7251->analog_regulator)) { |
| dev_err(dev, "cannot get analog regulator\n"); |
| return PTR_ERR(ov7251->analog_regulator); |
| } |
| |
| ov7251->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); |
| if (IS_ERR(ov7251->enable_gpio)) { |
| dev_err(dev, "cannot get enable gpio\n"); |
| return PTR_ERR(ov7251->enable_gpio); |
| } |
| |
| mutex_init(&ov7251->lock); |
| |
| v4l2_ctrl_handler_init(&ov7251->ctrls, 7); |
| ov7251->ctrls.lock = &ov7251->lock; |
| |
| v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops, |
| V4L2_CID_HFLIP, 0, 1, 1, 0); |
| v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| ov7251->exposure = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops, |
| V4L2_CID_EXPOSURE, 1, 32, 1, 32); |
| ov7251->gain = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops, |
| V4L2_CID_GAIN, 16, 1023, 1, 16); |
| v4l2_ctrl_new_std_menu_items(&ov7251->ctrls, &ov7251_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(ov7251_test_pattern_menu) - 1, |
| 0, 0, ov7251_test_pattern_menu); |
| ov7251->pixel_clock = v4l2_ctrl_new_std(&ov7251->ctrls, |
| &ov7251_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, |
| 1, INT_MAX, 1, 1); |
| ov7251->link_freq = v4l2_ctrl_new_int_menu(&ov7251->ctrls, |
| &ov7251_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq) - 1, |
| 0, link_freq); |
| if (ov7251->link_freq) |
| ov7251->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| ov7251->sd.ctrl_handler = &ov7251->ctrls; |
| |
| if (ov7251->ctrls.error) { |
| dev_err(dev, "%s: control initialization error %d\n", |
| __func__, ov7251->ctrls.error); |
| ret = ov7251->ctrls.error; |
| goto free_ctrl; |
| } |
| |
| v4l2_i2c_subdev_init(&ov7251->sd, client, &ov7251_subdev_ops); |
| ov7251->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| ov7251->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ov7251->sd.dev = &client->dev; |
| ov7251->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| ret = media_entity_pads_init(&ov7251->sd.entity, 1, &ov7251->pad); |
| if (ret < 0) { |
| dev_err(dev, "could not register media entity\n"); |
| goto free_ctrl; |
| } |
| |
| ret = ov7251_s_power(&ov7251->sd, true); |
| if (ret < 0) { |
| dev_err(dev, "could not power up OV7251\n"); |
| goto free_entity; |
| } |
| |
| ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_HIGH, &chip_id_high); |
| if (ret < 0 || chip_id_high != OV7251_CHIP_ID_HIGH_BYTE) { |
| dev_err(dev, "could not read ID high\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_LOW, &chip_id_low); |
| if (ret < 0 || chip_id_low != OV7251_CHIP_ID_LOW_BYTE) { |
| dev_err(dev, "could not read ID low\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ret = ov7251_read_reg(ov7251, OV7251_SC_GP_IO_IN1, &chip_rev); |
| if (ret < 0) { |
| dev_err(dev, "could not read revision\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| chip_rev >>= 4; |
| |
| dev_info(dev, "OV7251 revision %x (%s) detected at address 0x%02x\n", |
| chip_rev, |
| chip_rev == 0x4 ? "1A / 1B" : |
| chip_rev == 0x5 ? "1C / 1D" : |
| chip_rev == 0x6 ? "1E" : |
| chip_rev == 0x7 ? "1F" : "unknown", |
| client->addr); |
| |
| ret = ov7251_read_reg(ov7251, OV7251_PRE_ISP_00, |
| &ov7251->pre_isp_00); |
| if (ret < 0) { |
| dev_err(dev, "could not read test pattern value\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ret = ov7251_read_reg(ov7251, OV7251_TIMING_FORMAT1, |
| &ov7251->timing_format1); |
| if (ret < 0) { |
| dev_err(dev, "could not read vflip value\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ret = ov7251_read_reg(ov7251, OV7251_TIMING_FORMAT2, |
| &ov7251->timing_format2); |
| if (ret < 0) { |
| dev_err(dev, "could not read hflip value\n"); |
| ret = -ENODEV; |
| goto power_down; |
| } |
| |
| ov7251_s_power(&ov7251->sd, false); |
| |
| ret = v4l2_async_register_subdev(&ov7251->sd); |
| if (ret < 0) { |
| dev_err(dev, "could not register v4l2 device\n"); |
| goto free_entity; |
| } |
| |
| ov7251_entity_init_cfg(&ov7251->sd, NULL); |
| |
| return 0; |
| |
| power_down: |
| ov7251_s_power(&ov7251->sd, false); |
| free_entity: |
| media_entity_cleanup(&ov7251->sd.entity); |
| free_ctrl: |
| v4l2_ctrl_handler_free(&ov7251->ctrls); |
| mutex_destroy(&ov7251->lock); |
| |
| return ret; |
| } |
| |
| static int ov7251_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ov7251 *ov7251 = to_ov7251(sd); |
| |
| v4l2_async_unregister_subdev(&ov7251->sd); |
| media_entity_cleanup(&ov7251->sd.entity); |
| v4l2_ctrl_handler_free(&ov7251->ctrls); |
| mutex_destroy(&ov7251->lock); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ov7251_of_match[] = { |
| { .compatible = "ovti,ov7251" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, ov7251_of_match); |
| |
| static struct i2c_driver ov7251_i2c_driver = { |
| .driver = { |
| .of_match_table = ov7251_of_match, |
| .name = "ov7251", |
| }, |
| .probe_new = ov7251_probe, |
| .remove = ov7251_remove, |
| }; |
| |
| module_i2c_driver(ov7251_i2c_driver); |
| |
| MODULE_DESCRIPTION("Omnivision OV7251 Camera Driver"); |
| MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |