|  | /* | 
|  | * CHRP pci routines. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ide.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/hydra.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/gg2.h> | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/sections.h> | 
|  | #include <asm/pci-bridge.h> | 
|  | #include <asm/grackle.h> | 
|  | #include <asm/rtas.h> | 
|  |  | 
|  | #include "chrp.h" | 
|  |  | 
|  | /* LongTrail */ | 
|  | void __iomem *gg2_pci_config_base; | 
|  |  | 
|  | /* | 
|  | * The VLSI Golden Gate II has only 512K of PCI configuration space, so we | 
|  | * limit the bus number to 3 bits | 
|  | */ | 
|  |  | 
|  | int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, | 
|  | int len, u32 *val) | 
|  | { | 
|  | volatile void __iomem *cfg_data; | 
|  | struct pci_controller *hose = bus->sysdata; | 
|  |  | 
|  | if (bus->number > 7) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  | /* | 
|  | * Note: the caller has already checked that off is | 
|  | * suitably aligned and that len is 1, 2 or 4. | 
|  | */ | 
|  | cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); | 
|  | switch (len) { | 
|  | case 1: | 
|  | *val =  in_8(cfg_data); | 
|  | break; | 
|  | case 2: | 
|  | *val = in_le16(cfg_data); | 
|  | break; | 
|  | default: | 
|  | *val = in_le32(cfg_data); | 
|  | break; | 
|  | } | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, | 
|  | int len, u32 val) | 
|  | { | 
|  | volatile void __iomem *cfg_data; | 
|  | struct pci_controller *hose = bus->sysdata; | 
|  |  | 
|  | if (bus->number > 7) | 
|  | return PCIBIOS_DEVICE_NOT_FOUND; | 
|  | /* | 
|  | * Note: the caller has already checked that off is | 
|  | * suitably aligned and that len is 1, 2 or 4. | 
|  | */ | 
|  | cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); | 
|  | switch (len) { | 
|  | case 1: | 
|  | out_8(cfg_data, val); | 
|  | break; | 
|  | case 2: | 
|  | out_le16(cfg_data, val); | 
|  | break; | 
|  | default: | 
|  | out_le32(cfg_data, val); | 
|  | break; | 
|  | } | 
|  | return PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static struct pci_ops gg2_pci_ops = | 
|  | { | 
|  | gg2_read_config, | 
|  | gg2_write_config | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Access functions for PCI config space using RTAS calls. | 
|  | */ | 
|  | int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, | 
|  | int len, u32 *val) | 
|  | { | 
|  | struct pci_controller *hose = bus->sysdata; | 
|  | unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) | 
|  | | (((bus->number - hose->first_busno) & 0xff) << 16) | 
|  | | (hose->index << 24); | 
|  | int ret = -1; | 
|  | int rval; | 
|  |  | 
|  | rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); | 
|  | *val = ret; | 
|  | return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, | 
|  | int len, u32 val) | 
|  | { | 
|  | struct pci_controller *hose = bus->sysdata; | 
|  | unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) | 
|  | | (((bus->number - hose->first_busno) & 0xff) << 16) | 
|  | | (hose->index << 24); | 
|  | int rval; | 
|  |  | 
|  | rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, | 
|  | addr, len, val); | 
|  | return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; | 
|  | } | 
|  |  | 
|  | static struct pci_ops rtas_pci_ops = | 
|  | { | 
|  | rtas_read_config, | 
|  | rtas_write_config | 
|  | }; | 
|  |  | 
|  | volatile struct Hydra __iomem *Hydra = NULL; | 
|  |  | 
|  | int __init | 
|  | hydra_init(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct resource r; | 
|  |  | 
|  | np = find_devices("mac-io"); | 
|  | if (np == NULL || of_address_to_resource(np, 0, &r)) | 
|  | return 0; | 
|  | Hydra = ioremap(r.start, r.end-r.start); | 
|  | printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start); | 
|  | printk("Hydra Feature_Control was %x", | 
|  | in_le32(&Hydra->Feature_Control)); | 
|  | out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | | 
|  | HYDRA_FC_SCSI_CELL_EN | | 
|  | HYDRA_FC_SCCA_ENABLE | | 
|  | HYDRA_FC_SCCB_ENABLE | | 
|  | HYDRA_FC_ARB_BYPASS | | 
|  | HYDRA_FC_MPIC_ENABLE | | 
|  | HYDRA_FC_SLOW_SCC_PCLK | | 
|  | HYDRA_FC_MPIC_IS_MASTER)); | 
|  | printk(", now %x\n", in_le32(&Hydra->Feature_Control)); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void __init | 
|  | chrp_pcibios_fixup(void) | 
|  | { | 
|  | struct pci_dev *dev = NULL; | 
|  |  | 
|  | for_each_pci_dev(dev) | 
|  | pci_read_irq_line(dev); | 
|  | } | 
|  |  | 
|  | #define PRG_CL_RESET_VALID 0x00010000 | 
|  |  | 
|  | static void __init | 
|  | setup_python(struct pci_controller *hose, struct device_node *dev) | 
|  | { | 
|  | u32 __iomem *reg; | 
|  | u32 val; | 
|  | struct resource r; | 
|  |  | 
|  | if (of_address_to_resource(dev, 0, &r)) { | 
|  | printk(KERN_ERR "No address for Python PCI controller\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Clear the magic go-slow bit */ | 
|  | reg = ioremap(r.start + 0xf6000, 0x40); | 
|  | BUG_ON(!reg); | 
|  | val = in_be32(®[12]); | 
|  | if (val & PRG_CL_RESET_VALID) { | 
|  | out_be32(®[12], val & ~PRG_CL_RESET_VALID); | 
|  | in_be32(®[12]); | 
|  | } | 
|  | iounmap(reg); | 
|  |  | 
|  | setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010); | 
|  | } | 
|  |  | 
|  | /* Marvell Discovery II based Pegasos 2 */ | 
|  | static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) | 
|  | { | 
|  | struct device_node *root = find_path_device("/"); | 
|  | struct device_node *rtas; | 
|  |  | 
|  | of_node_get(root); | 
|  | rtas = of_find_node_by_name (root, "rtas"); | 
|  | if (rtas) { | 
|  | hose->ops = &rtas_pci_ops; | 
|  | of_node_put(rtas); | 
|  | } else { | 
|  | printk ("RTAS supporting Pegasos OF not found, please upgrade" | 
|  | " your firmware\n"); | 
|  | } | 
|  | pci_assign_all_buses = 1; | 
|  | } | 
|  |  | 
|  | void __init | 
|  | chrp_find_bridges(void) | 
|  | { | 
|  | struct device_node *dev; | 
|  | int *bus_range; | 
|  | int len, index = -1; | 
|  | struct pci_controller *hose; | 
|  | unsigned int *dma; | 
|  | char *model, *machine; | 
|  | int is_longtrail = 0, is_mot = 0, is_pegasos = 0; | 
|  | struct device_node *root = find_path_device("/"); | 
|  | struct resource r; | 
|  | /* | 
|  | * The PCI host bridge nodes on some machines don't have | 
|  | * properties to adequately identify them, so we have to | 
|  | * look at what sort of machine this is as well. | 
|  | */ | 
|  | machine = get_property(root, "model", NULL); | 
|  | if (machine != NULL) { | 
|  | is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; | 
|  | is_mot = strncmp(machine, "MOT", 3) == 0; | 
|  | if (strncmp(machine, "Pegasos2", 8) == 0) | 
|  | is_pegasos = 2; | 
|  | else if (strncmp(machine, "Pegasos", 7) == 0) | 
|  | is_pegasos = 1; | 
|  | } | 
|  | for (dev = root->child; dev != NULL; dev = dev->sibling) { | 
|  | if (dev->type == NULL || strcmp(dev->type, "pci") != 0) | 
|  | continue; | 
|  | ++index; | 
|  | /* The GG2 bridge on the LongTrail doesn't have an address */ | 
|  | if (of_address_to_resource(dev, 0, &r) && !is_longtrail) { | 
|  | printk(KERN_WARNING "Can't use %s: no address\n", | 
|  | dev->full_name); | 
|  | continue; | 
|  | } | 
|  | bus_range = (int *) get_property(dev, "bus-range", &len); | 
|  | if (bus_range == NULL || len < 2 * sizeof(int)) { | 
|  | printk(KERN_WARNING "Can't get bus-range for %s\n", | 
|  | dev->full_name); | 
|  | continue; | 
|  | } | 
|  | if (bus_range[1] == bus_range[0]) | 
|  | printk(KERN_INFO "PCI bus %d", bus_range[0]); | 
|  | else | 
|  | printk(KERN_INFO "PCI buses %d..%d", | 
|  | bus_range[0], bus_range[1]); | 
|  | printk(" controlled by %s", dev->type); | 
|  | if (!is_longtrail) | 
|  | printk(" at %llx", (unsigned long long)r.start); | 
|  | printk("\n"); | 
|  |  | 
|  | hose = pcibios_alloc_controller(); | 
|  | if (!hose) { | 
|  | printk("Can't allocate PCI controller structure for %s\n", | 
|  | dev->full_name); | 
|  | continue; | 
|  | } | 
|  | hose->arch_data = dev; | 
|  | hose->first_busno = bus_range[0]; | 
|  | hose->last_busno = bus_range[1]; | 
|  |  | 
|  | model = get_property(dev, "model", NULL); | 
|  | if (model == NULL) | 
|  | model = "<none>"; | 
|  | if (device_is_compatible(dev, "IBM,python")) { | 
|  | setup_python(hose, dev); | 
|  | } else if (is_mot | 
|  | || strncmp(model, "Motorola, Grackle", 17) == 0) { | 
|  | setup_grackle(hose); | 
|  | } else if (is_longtrail) { | 
|  | void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); | 
|  | hose->ops = &gg2_pci_ops; | 
|  | hose->cfg_data = p; | 
|  | gg2_pci_config_base = p; | 
|  | } else if (is_pegasos == 1) { | 
|  | setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); | 
|  | } else if (is_pegasos == 2) { | 
|  | setup_peg2(hose, dev); | 
|  | } else { | 
|  | printk("No methods for %s (model %s), using RTAS\n", | 
|  | dev->full_name, model); | 
|  | hose->ops = &rtas_pci_ops; | 
|  | } | 
|  |  | 
|  | pci_process_bridge_OF_ranges(hose, dev, index == 0); | 
|  |  | 
|  | /* check the first bridge for a property that we can | 
|  | use to set pci_dram_offset */ | 
|  | dma = (unsigned int *) | 
|  | get_property(dev, "ibm,dma-ranges", &len); | 
|  | if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { | 
|  | pci_dram_offset = dma[2] - dma[3]; | 
|  | printk("pci_dram_offset = %lx\n", pci_dram_offset); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Do not fixup interrupts from OF tree on pegasos */ | 
|  | if (is_pegasos) | 
|  | ppc_md.pcibios_fixup = NULL; | 
|  | } |