| /* | 
 |  *  Device management routines | 
 |  *  Copyright (c) by Jaroslav Kysela <perex@suse.cz> | 
 |  * | 
 |  * | 
 |  *   This program is free software; you can redistribute it and/or modify | 
 |  *   it under the terms of the GNU General Public License as published by | 
 |  *   the Free Software Foundation; either version 2 of the License, or | 
 |  *   (at your option) any later version. | 
 |  * | 
 |  *   This program is distributed in the hope that it will be useful, | 
 |  *   but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *   GNU General Public License for more details. | 
 |  * | 
 |  *   You should have received a copy of the GNU General Public License | 
 |  *   along with this program; if not, write to the Free Software | 
 |  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA | 
 |  * | 
 |  */ | 
 |  | 
 | #include <sound/driver.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/time.h> | 
 | #include <linux/errno.h> | 
 | #include <sound/core.h> | 
 |  | 
 | /** | 
 |  * snd_device_new - create an ALSA device component | 
 |  * @card: the card instance | 
 |  * @type: the device type, SNDRV_DEV_XXX | 
 |  * @device_data: the data pointer of this device | 
 |  * @ops: the operator table | 
 |  * | 
 |  * Creates a new device component for the given data pointer. | 
 |  * The device will be assigned to the card and managed together | 
 |  * by the card. | 
 |  * | 
 |  * The data pointer plays a role as the identifier, too, so the | 
 |  * pointer address must be unique and unchanged. | 
 |  * | 
 |  * Returns zero if successful, or a negative error code on failure. | 
 |  */ | 
 | int snd_device_new(struct snd_card *card, snd_device_type_t type, | 
 | 		   void *device_data, struct snd_device_ops *ops) | 
 | { | 
 | 	struct snd_device *dev; | 
 |  | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	snd_assert(device_data != NULL, return -ENXIO); | 
 | 	snd_assert(ops != NULL, return -ENXIO); | 
 | 	dev = kzalloc(sizeof(*dev), GFP_KERNEL); | 
 | 	if (dev == NULL) { | 
 | 		snd_printk(KERN_ERR "Cannot allocate device\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	dev->card = card; | 
 | 	dev->type = type; | 
 | 	dev->state = SNDRV_DEV_BUILD; | 
 | 	dev->device_data = device_data; | 
 | 	dev->ops = ops; | 
 | 	list_add(&dev->list, &card->devices);	/* add to the head of list */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * snd_device_free - release the device from the card | 
 |  * @card: the card instance | 
 |  * @device_data: the data pointer to release | 
 |  * | 
 |  * Removes the device from the list on the card and invokes the | 
 |  * callback, dev_unregister or dev_free, corresponding to the state. | 
 |  * Then release the device. | 
 |  * | 
 |  * Returns zero if successful, or a negative error code on failure or if the | 
 |  * device not found. | 
 |  */ | 
 | int snd_device_free(struct snd_card *card, void *device_data) | 
 | { | 
 | 	struct list_head *list; | 
 | 	struct snd_device *dev; | 
 | 	 | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	snd_assert(device_data != NULL, return -ENXIO); | 
 | 	list_for_each(list, &card->devices) { | 
 | 		dev = snd_device(list); | 
 | 		if (dev->device_data != device_data) | 
 | 			continue; | 
 | 		/* unlink */ | 
 | 		list_del(&dev->list); | 
 | 		if ((dev->state == SNDRV_DEV_REGISTERED || | 
 | 		     dev->state == SNDRV_DEV_DISCONNECTED) && | 
 | 		    dev->ops->dev_unregister) { | 
 | 			if (dev->ops->dev_unregister(dev)) | 
 | 				snd_printk(KERN_ERR "device unregister failure\n"); | 
 | 		} else { | 
 | 			if (dev->ops->dev_free) { | 
 | 				if (dev->ops->dev_free(dev)) | 
 | 					snd_printk(KERN_ERR "device free failure\n"); | 
 | 			} | 
 | 		} | 
 | 		kfree(dev); | 
 | 		return 0; | 
 | 	} | 
 | 	snd_printd("device free %p (from %p), not found\n", device_data, | 
 | 		   __builtin_return_address(0)); | 
 | 	return -ENXIO; | 
 | } | 
 |  | 
 | /** | 
 |  * snd_device_disconnect - disconnect the device | 
 |  * @card: the card instance | 
 |  * @device_data: the data pointer to disconnect | 
 |  * | 
 |  * Turns the device into the disconnection state, invoking | 
 |  * dev_disconnect callback, if the device was already registered. | 
 |  * | 
 |  * Usually called from snd_card_disconnect(). | 
 |  * | 
 |  * Returns zero if successful, or a negative error code on failure or if the | 
 |  * device not found. | 
 |  */ | 
 | int snd_device_disconnect(struct snd_card *card, void *device_data) | 
 | { | 
 | 	struct list_head *list; | 
 | 	struct snd_device *dev; | 
 |  | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	snd_assert(device_data != NULL, return -ENXIO); | 
 | 	list_for_each(list, &card->devices) { | 
 | 		dev = snd_device(list); | 
 | 		if (dev->device_data != device_data) | 
 | 			continue; | 
 | 		if (dev->state == SNDRV_DEV_REGISTERED && | 
 | 		    dev->ops->dev_disconnect) { | 
 | 			if (dev->ops->dev_disconnect(dev)) | 
 | 				snd_printk(KERN_ERR "device disconnect failure\n"); | 
 | 			dev->state = SNDRV_DEV_DISCONNECTED; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 | 	snd_printd("device disconnect %p (from %p), not found\n", device_data, | 
 | 		   __builtin_return_address(0)); | 
 | 	return -ENXIO; | 
 | } | 
 |  | 
 | /** | 
 |  * snd_device_register - register the device | 
 |  * @card: the card instance | 
 |  * @device_data: the data pointer to register | 
 |  * | 
 |  * Registers the device which was already created via | 
 |  * snd_device_new().  Usually this is called from snd_card_register(), | 
 |  * but it can be called later if any new devices are created after | 
 |  * invocation of snd_card_register(). | 
 |  * | 
 |  * Returns zero if successful, or a negative error code on failure or if the | 
 |  * device not found. | 
 |  */ | 
 | int snd_device_register(struct snd_card *card, void *device_data) | 
 | { | 
 | 	struct list_head *list; | 
 | 	struct snd_device *dev; | 
 | 	int err; | 
 |  | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	snd_assert(device_data != NULL, return -ENXIO); | 
 | 	list_for_each(list, &card->devices) { | 
 | 		dev = snd_device(list); | 
 | 		if (dev->device_data != device_data) | 
 | 			continue; | 
 | 		if (dev->state == SNDRV_DEV_BUILD && dev->ops->dev_register) { | 
 | 			if ((err = dev->ops->dev_register(dev)) < 0) | 
 | 				return err; | 
 | 			dev->state = SNDRV_DEV_REGISTERED; | 
 | 			return 0; | 
 | 		} | 
 | 		snd_printd("snd_device_register busy\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 | 	snd_BUG(); | 
 | 	return -ENXIO; | 
 | } | 
 |  | 
 | /* | 
 |  * register all the devices on the card. | 
 |  * called from init.c | 
 |  */ | 
 | int snd_device_register_all(struct snd_card *card) | 
 | { | 
 | 	struct list_head *list; | 
 | 	struct snd_device *dev; | 
 | 	int err; | 
 | 	 | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	list_for_each(list, &card->devices) { | 
 | 		dev = snd_device(list); | 
 | 		if (dev->state == SNDRV_DEV_BUILD && dev->ops->dev_register) { | 
 | 			if ((err = dev->ops->dev_register(dev)) < 0) | 
 | 				return err; | 
 | 			dev->state = SNDRV_DEV_REGISTERED; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * disconnect all the devices on the card. | 
 |  * called from init.c | 
 |  */ | 
 | int snd_device_disconnect_all(struct snd_card *card) | 
 | { | 
 | 	struct snd_device *dev; | 
 | 	struct list_head *list; | 
 | 	int err = 0; | 
 |  | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	list_for_each(list, &card->devices) { | 
 | 		dev = snd_device(list); | 
 | 		if (snd_device_disconnect(card, dev->device_data) < 0) | 
 | 			err = -ENXIO; | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * release all the devices on the card. | 
 |  * called from init.c | 
 |  */ | 
 | int snd_device_free_all(struct snd_card *card, snd_device_cmd_t cmd) | 
 | { | 
 | 	struct snd_device *dev; | 
 | 	struct list_head *list; | 
 | 	int err; | 
 | 	unsigned int range_low, range_high; | 
 |  | 
 | 	snd_assert(card != NULL, return -ENXIO); | 
 | 	range_low = cmd * SNDRV_DEV_TYPE_RANGE_SIZE; | 
 | 	range_high = range_low + SNDRV_DEV_TYPE_RANGE_SIZE - 1; | 
 |       __again: | 
 | 	list_for_each(list, &card->devices) { | 
 | 		dev = snd_device(list);		 | 
 | 		if (dev->type >= range_low && dev->type <= range_high) { | 
 | 			if ((err = snd_device_free(card, dev->device_data)) < 0) | 
 | 				return err; | 
 | 			goto __again; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } |