| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * Copyright(c) 2016 - 2017 Intel Deutschland GmbH |
| * Copyright(c) 2018 - 2019 Intel Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <linuxwifi@intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * Copyright(c) 2016 - 2017 Intel Deutschland GmbH |
| * Copyright(c) 2018 - 2019 Intel Corporation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| *****************************************************************************/ |
| #include <net/mac80211.h> |
| #include <linux/netdevice.h> |
| |
| #include "iwl-trans.h" |
| #include "iwl-op-mode.h" |
| #include "fw/img.h" |
| #include "iwl-debug.h" |
| #include "iwl-csr.h" /* for iwl_mvm_rx_card_state_notif */ |
| #include "iwl-io.h" /* for iwl_mvm_rx_card_state_notif */ |
| #include "iwl-prph.h" |
| #include "fw/acpi.h" |
| |
| #include "mvm.h" |
| #include "fw/dbg.h" |
| #include "iwl-phy-db.h" |
| #include "iwl-modparams.h" |
| #include "iwl-nvm-parse.h" |
| |
| #define MVM_UCODE_ALIVE_TIMEOUT HZ |
| #define MVM_UCODE_CALIB_TIMEOUT (2*HZ) |
| |
| #define UCODE_VALID_OK cpu_to_le32(0x1) |
| |
| struct iwl_mvm_alive_data { |
| bool valid; |
| u32 scd_base_addr; |
| }; |
| |
| static int iwl_send_tx_ant_cfg(struct iwl_mvm *mvm, u8 valid_tx_ant) |
| { |
| struct iwl_tx_ant_cfg_cmd tx_ant_cmd = { |
| .valid = cpu_to_le32(valid_tx_ant), |
| }; |
| |
| IWL_DEBUG_FW(mvm, "select valid tx ant: %u\n", valid_tx_ant); |
| return iwl_mvm_send_cmd_pdu(mvm, TX_ANT_CONFIGURATION_CMD, 0, |
| sizeof(tx_ant_cmd), &tx_ant_cmd); |
| } |
| |
| static int iwl_send_rss_cfg_cmd(struct iwl_mvm *mvm) |
| { |
| int i; |
| struct iwl_rss_config_cmd cmd = { |
| .flags = cpu_to_le32(IWL_RSS_ENABLE), |
| .hash_mask = BIT(IWL_RSS_HASH_TYPE_IPV4_TCP) | |
| BIT(IWL_RSS_HASH_TYPE_IPV4_UDP) | |
| BIT(IWL_RSS_HASH_TYPE_IPV4_PAYLOAD) | |
| BIT(IWL_RSS_HASH_TYPE_IPV6_TCP) | |
| BIT(IWL_RSS_HASH_TYPE_IPV6_UDP) | |
| BIT(IWL_RSS_HASH_TYPE_IPV6_PAYLOAD), |
| }; |
| |
| if (mvm->trans->num_rx_queues == 1) |
| return 0; |
| |
| /* Do not direct RSS traffic to Q 0 which is our fallback queue */ |
| for (i = 0; i < ARRAY_SIZE(cmd.indirection_table); i++) |
| cmd.indirection_table[i] = |
| 1 + (i % (mvm->trans->num_rx_queues - 1)); |
| netdev_rss_key_fill(cmd.secret_key, sizeof(cmd.secret_key)); |
| |
| return iwl_mvm_send_cmd_pdu(mvm, RSS_CONFIG_CMD, 0, sizeof(cmd), &cmd); |
| } |
| |
| static int iwl_configure_rxq(struct iwl_mvm *mvm) |
| { |
| int i, num_queues, size, ret; |
| struct iwl_rfh_queue_config *cmd; |
| struct iwl_host_cmd hcmd = { |
| .id = WIDE_ID(DATA_PATH_GROUP, RFH_QUEUE_CONFIG_CMD), |
| .dataflags[0] = IWL_HCMD_DFL_NOCOPY, |
| }; |
| |
| /* |
| * The default queue is configured via context info, so if we |
| * have a single queue, there's nothing to do here. |
| */ |
| if (mvm->trans->num_rx_queues == 1) |
| return 0; |
| |
| /* skip the default queue */ |
| num_queues = mvm->trans->num_rx_queues - 1; |
| |
| size = struct_size(cmd, data, num_queues); |
| |
| cmd = kzalloc(size, GFP_KERNEL); |
| if (!cmd) |
| return -ENOMEM; |
| |
| cmd->num_queues = num_queues; |
| |
| for (i = 0; i < num_queues; i++) { |
| struct iwl_trans_rxq_dma_data data; |
| |
| cmd->data[i].q_num = i + 1; |
| iwl_trans_get_rxq_dma_data(mvm->trans, i + 1, &data); |
| |
| cmd->data[i].fr_bd_cb = cpu_to_le64(data.fr_bd_cb); |
| cmd->data[i].urbd_stts_wrptr = |
| cpu_to_le64(data.urbd_stts_wrptr); |
| cmd->data[i].ur_bd_cb = cpu_to_le64(data.ur_bd_cb); |
| cmd->data[i].fr_bd_wid = cpu_to_le32(data.fr_bd_wid); |
| } |
| |
| hcmd.data[0] = cmd; |
| hcmd.len[0] = size; |
| |
| ret = iwl_mvm_send_cmd(mvm, &hcmd); |
| |
| kfree(cmd); |
| |
| return ret; |
| } |
| |
| static int iwl_mvm_send_dqa_cmd(struct iwl_mvm *mvm) |
| { |
| struct iwl_dqa_enable_cmd dqa_cmd = { |
| .cmd_queue = cpu_to_le32(IWL_MVM_DQA_CMD_QUEUE), |
| }; |
| u32 cmd_id = iwl_cmd_id(DQA_ENABLE_CMD, DATA_PATH_GROUP, 0); |
| int ret; |
| |
| ret = iwl_mvm_send_cmd_pdu(mvm, cmd_id, 0, sizeof(dqa_cmd), &dqa_cmd); |
| if (ret) |
| IWL_ERR(mvm, "Failed to send DQA enabling command: %d\n", ret); |
| else |
| IWL_DEBUG_FW(mvm, "Working in DQA mode\n"); |
| |
| return ret; |
| } |
| |
| void iwl_mvm_mfu_assert_dump_notif(struct iwl_mvm *mvm, |
| struct iwl_rx_cmd_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_mfu_assert_dump_notif *mfu_dump_notif = (void *)pkt->data; |
| __le32 *dump_data = mfu_dump_notif->data; |
| int n_words = le32_to_cpu(mfu_dump_notif->data_size) / sizeof(__le32); |
| int i; |
| |
| if (mfu_dump_notif->index_num == 0) |
| IWL_INFO(mvm, "MFUART assert id 0x%x occurred\n", |
| le32_to_cpu(mfu_dump_notif->assert_id)); |
| |
| for (i = 0; i < n_words; i++) |
| IWL_DEBUG_INFO(mvm, |
| "MFUART assert dump, dword %u: 0x%08x\n", |
| le16_to_cpu(mfu_dump_notif->index_num) * |
| n_words + i, |
| le32_to_cpu(dump_data[i])); |
| } |
| |
| static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, |
| struct iwl_rx_packet *pkt, void *data) |
| { |
| struct iwl_mvm *mvm = |
| container_of(notif_wait, struct iwl_mvm, notif_wait); |
| struct iwl_mvm_alive_data *alive_data = data; |
| struct mvm_alive_resp_v3 *palive3; |
| struct mvm_alive_resp *palive; |
| struct iwl_umac_alive *umac; |
| struct iwl_lmac_alive *lmac1; |
| struct iwl_lmac_alive *lmac2 = NULL; |
| u16 status; |
| u32 lmac_error_event_table, umac_error_event_table; |
| |
| if (iwl_rx_packet_payload_len(pkt) == sizeof(*palive)) { |
| palive = (void *)pkt->data; |
| umac = &palive->umac_data; |
| lmac1 = &palive->lmac_data[0]; |
| lmac2 = &palive->lmac_data[1]; |
| status = le16_to_cpu(palive->status); |
| } else { |
| palive3 = (void *)pkt->data; |
| umac = &palive3->umac_data; |
| lmac1 = &palive3->lmac_data; |
| status = le16_to_cpu(palive3->status); |
| } |
| |
| lmac_error_event_table = |
| le32_to_cpu(lmac1->dbg_ptrs.error_event_table_ptr); |
| iwl_fw_lmac1_set_alive_err_table(mvm->trans, lmac_error_event_table); |
| |
| if (lmac2) |
| mvm->trans->dbg.lmac_error_event_table[1] = |
| le32_to_cpu(lmac2->dbg_ptrs.error_event_table_ptr); |
| |
| umac_error_event_table = le32_to_cpu(umac->dbg_ptrs.error_info_addr); |
| |
| if (!umac_error_event_table) { |
| mvm->support_umac_log = false; |
| } else if (umac_error_event_table >= |
| mvm->trans->cfg->min_umac_error_event_table) { |
| mvm->support_umac_log = true; |
| } else { |
| IWL_ERR(mvm, |
| "Not valid error log pointer 0x%08X for %s uCode\n", |
| umac_error_event_table, |
| (mvm->fwrt.cur_fw_img == IWL_UCODE_INIT) ? |
| "Init" : "RT"); |
| mvm->support_umac_log = false; |
| } |
| |
| if (mvm->support_umac_log) |
| iwl_fw_umac_set_alive_err_table(mvm->trans, |
| umac_error_event_table); |
| |
| alive_data->scd_base_addr = le32_to_cpu(lmac1->dbg_ptrs.scd_base_ptr); |
| alive_data->valid = status == IWL_ALIVE_STATUS_OK; |
| |
| IWL_DEBUG_FW(mvm, |
| "Alive ucode status 0x%04x revision 0x%01X 0x%01X\n", |
| status, lmac1->ver_type, lmac1->ver_subtype); |
| |
| if (lmac2) |
| IWL_DEBUG_FW(mvm, "Alive ucode CDB\n"); |
| |
| IWL_DEBUG_FW(mvm, |
| "UMAC version: Major - 0x%x, Minor - 0x%x\n", |
| le32_to_cpu(umac->umac_major), |
| le32_to_cpu(umac->umac_minor)); |
| |
| iwl_fwrt_update_fw_versions(&mvm->fwrt, lmac1, umac); |
| |
| return true; |
| } |
| |
| static bool iwl_wait_init_complete(struct iwl_notif_wait_data *notif_wait, |
| struct iwl_rx_packet *pkt, void *data) |
| { |
| WARN_ON(pkt->hdr.cmd != INIT_COMPLETE_NOTIF); |
| |
| return true; |
| } |
| |
| static bool iwl_wait_phy_db_entry(struct iwl_notif_wait_data *notif_wait, |
| struct iwl_rx_packet *pkt, void *data) |
| { |
| struct iwl_phy_db *phy_db = data; |
| |
| if (pkt->hdr.cmd != CALIB_RES_NOTIF_PHY_DB) { |
| WARN_ON(pkt->hdr.cmd != INIT_COMPLETE_NOTIF); |
| return true; |
| } |
| |
| WARN_ON(iwl_phy_db_set_section(phy_db, pkt)); |
| |
| return false; |
| } |
| |
| static int iwl_mvm_load_ucode_wait_alive(struct iwl_mvm *mvm, |
| enum iwl_ucode_type ucode_type) |
| { |
| struct iwl_notification_wait alive_wait; |
| struct iwl_mvm_alive_data alive_data = {}; |
| const struct fw_img *fw; |
| int ret; |
| enum iwl_ucode_type old_type = mvm->fwrt.cur_fw_img; |
| static const u16 alive_cmd[] = { MVM_ALIVE }; |
| bool run_in_rfkill = |
| ucode_type == IWL_UCODE_INIT || iwl_mvm_has_unified_ucode(mvm); |
| |
| if (ucode_type == IWL_UCODE_REGULAR && |
| iwl_fw_dbg_conf_usniffer(mvm->fw, FW_DBG_START_FROM_ALIVE) && |
| !(fw_has_capa(&mvm->fw->ucode_capa, |
| IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED))) |
| fw = iwl_get_ucode_image(mvm->fw, IWL_UCODE_REGULAR_USNIFFER); |
| else |
| fw = iwl_get_ucode_image(mvm->fw, ucode_type); |
| if (WARN_ON(!fw)) |
| return -EINVAL; |
| iwl_fw_set_current_image(&mvm->fwrt, ucode_type); |
| clear_bit(IWL_MVM_STATUS_FIRMWARE_RUNNING, &mvm->status); |
| |
| iwl_init_notification_wait(&mvm->notif_wait, &alive_wait, |
| alive_cmd, ARRAY_SIZE(alive_cmd), |
| iwl_alive_fn, &alive_data); |
| |
| /* |
| * We want to load the INIT firmware even in RFKILL |
| * For the unified firmware case, the ucode_type is not |
| * INIT, but we still need to run it. |
| */ |
| ret = iwl_trans_start_fw(mvm->trans, fw, run_in_rfkill); |
| if (ret) { |
| iwl_fw_set_current_image(&mvm->fwrt, old_type); |
| iwl_remove_notification(&mvm->notif_wait, &alive_wait); |
| return ret; |
| } |
| |
| /* |
| * Some things may run in the background now, but we |
| * just wait for the ALIVE notification here. |
| */ |
| ret = iwl_wait_notification(&mvm->notif_wait, &alive_wait, |
| MVM_UCODE_ALIVE_TIMEOUT); |
| if (ret) { |
| struct iwl_trans *trans = mvm->trans; |
| |
| if (ret == -ETIMEDOUT) |
| iwl_fw_dbg_error_collect(&mvm->fwrt, |
| FW_DBG_TRIGGER_ALIVE_TIMEOUT); |
| |
| if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_22000) |
| IWL_ERR(mvm, |
| "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n", |
| iwl_read_umac_prph(trans, UMAG_SB_CPU_1_STATUS), |
| iwl_read_umac_prph(trans, |
| UMAG_SB_CPU_2_STATUS)); |
| else if (trans->trans_cfg->device_family >= |
| IWL_DEVICE_FAMILY_8000) |
| IWL_ERR(mvm, |
| "SecBoot CPU1 Status: 0x%x, CPU2 Status: 0x%x\n", |
| iwl_read_prph(trans, SB_CPU_1_STATUS), |
| iwl_read_prph(trans, SB_CPU_2_STATUS)); |
| iwl_fw_set_current_image(&mvm->fwrt, old_type); |
| return ret; |
| } |
| |
| if (!alive_data.valid) { |
| IWL_ERR(mvm, "Loaded ucode is not valid!\n"); |
| iwl_fw_set_current_image(&mvm->fwrt, old_type); |
| return -EIO; |
| } |
| |
| iwl_trans_fw_alive(mvm->trans, alive_data.scd_base_addr); |
| |
| /* |
| * Note: all the queues are enabled as part of the interface |
| * initialization, but in firmware restart scenarios they |
| * could be stopped, so wake them up. In firmware restart, |
| * mac80211 will have the queues stopped as well until the |
| * reconfiguration completes. During normal startup, they |
| * will be empty. |
| */ |
| |
| memset(&mvm->queue_info, 0, sizeof(mvm->queue_info)); |
| /* |
| * Set a 'fake' TID for the command queue, since we use the |
| * hweight() of the tid_bitmap as a refcount now. Not that |
| * we ever even consider the command queue as one we might |
| * want to reuse, but be safe nevertheless. |
| */ |
| mvm->queue_info[IWL_MVM_DQA_CMD_QUEUE].tid_bitmap = |
| BIT(IWL_MAX_TID_COUNT + 2); |
| |
| set_bit(IWL_MVM_STATUS_FIRMWARE_RUNNING, &mvm->status); |
| #ifdef CONFIG_IWLWIFI_DEBUGFS |
| iwl_fw_set_dbg_rec_on(&mvm->fwrt); |
| #endif |
| |
| return 0; |
| } |
| |
| static int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) |
| { |
| struct iwl_notification_wait init_wait; |
| struct iwl_nvm_access_complete_cmd nvm_complete = {}; |
| struct iwl_init_extended_cfg_cmd init_cfg = { |
| .init_flags = cpu_to_le32(BIT(IWL_INIT_NVM)), |
| }; |
| static const u16 init_complete[] = { |
| INIT_COMPLETE_NOTIF, |
| }; |
| int ret; |
| |
| if (mvm->trans->cfg->tx_with_siso_diversity) |
| init_cfg.init_flags |= cpu_to_le32(BIT(IWL_INIT_PHY)); |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| mvm->rfkill_safe_init_done = false; |
| |
| iwl_init_notification_wait(&mvm->notif_wait, |
| &init_wait, |
| init_complete, |
| ARRAY_SIZE(init_complete), |
| iwl_wait_init_complete, |
| NULL); |
| |
| iwl_dbg_tlv_time_point(&mvm->fwrt, IWL_FW_INI_TIME_POINT_EARLY, NULL); |
| |
| /* Will also start the device */ |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_REGULAR); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret); |
| goto error; |
| } |
| iwl_dbg_tlv_time_point(&mvm->fwrt, IWL_FW_INI_TIME_POINT_AFTER_ALIVE, |
| NULL); |
| |
| /* Send init config command to mark that we are sending NVM access |
| * commands |
| */ |
| ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(SYSTEM_GROUP, |
| INIT_EXTENDED_CFG_CMD), |
| CMD_SEND_IN_RFKILL, |
| sizeof(init_cfg), &init_cfg); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to run init config command: %d\n", |
| ret); |
| goto error; |
| } |
| |
| /* Load NVM to NIC if needed */ |
| if (mvm->nvm_file_name) { |
| iwl_read_external_nvm(mvm->trans, mvm->nvm_file_name, |
| mvm->nvm_sections); |
| iwl_mvm_load_nvm_to_nic(mvm); |
| } |
| |
| if (IWL_MVM_PARSE_NVM && read_nvm) { |
| ret = iwl_nvm_init(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to read NVM: %d\n", ret); |
| goto error; |
| } |
| } |
| |
| ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(REGULATORY_AND_NVM_GROUP, |
| NVM_ACCESS_COMPLETE), |
| CMD_SEND_IN_RFKILL, |
| sizeof(nvm_complete), &nvm_complete); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to run complete NVM access: %d\n", |
| ret); |
| goto error; |
| } |
| |
| /* We wait for the INIT complete notification */ |
| ret = iwl_wait_notification(&mvm->notif_wait, &init_wait, |
| MVM_UCODE_ALIVE_TIMEOUT); |
| if (ret) |
| return ret; |
| |
| /* Read the NVM only at driver load time, no need to do this twice */ |
| if (!IWL_MVM_PARSE_NVM && read_nvm) { |
| mvm->nvm_data = iwl_get_nvm(mvm->trans, mvm->fw); |
| if (IS_ERR(mvm->nvm_data)) { |
| ret = PTR_ERR(mvm->nvm_data); |
| mvm->nvm_data = NULL; |
| IWL_ERR(mvm, "Failed to read NVM: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| mvm->rfkill_safe_init_done = true; |
| |
| return 0; |
| |
| error: |
| iwl_remove_notification(&mvm->notif_wait, &init_wait); |
| return ret; |
| } |
| |
| static int iwl_send_phy_cfg_cmd(struct iwl_mvm *mvm) |
| { |
| struct iwl_phy_cfg_cmd phy_cfg_cmd; |
| enum iwl_ucode_type ucode_type = mvm->fwrt.cur_fw_img; |
| |
| if (iwl_mvm_has_unified_ucode(mvm) && |
| !mvm->trans->cfg->tx_with_siso_diversity) { |
| return 0; |
| } else if (mvm->trans->cfg->tx_with_siso_diversity) { |
| /* |
| * TODO: currently we don't set the antenna but letting the NIC |
| * to decide which antenna to use. This should come from BIOS. |
| */ |
| phy_cfg_cmd.phy_cfg = |
| cpu_to_le32(FW_PHY_CFG_CHAIN_SAD_ENABLED); |
| } |
| |
| /* Set parameters */ |
| phy_cfg_cmd.phy_cfg = cpu_to_le32(iwl_mvm_get_phy_config(mvm)); |
| |
| /* set flags extra PHY configuration flags from the device's cfg */ |
| phy_cfg_cmd.phy_cfg |= cpu_to_le32(mvm->cfg->extra_phy_cfg_flags); |
| |
| phy_cfg_cmd.calib_control.event_trigger = |
| mvm->fw->default_calib[ucode_type].event_trigger; |
| phy_cfg_cmd.calib_control.flow_trigger = |
| mvm->fw->default_calib[ucode_type].flow_trigger; |
| |
| IWL_DEBUG_INFO(mvm, "Sending Phy CFG command: 0x%x\n", |
| phy_cfg_cmd.phy_cfg); |
| |
| return iwl_mvm_send_cmd_pdu(mvm, PHY_CONFIGURATION_CMD, 0, |
| sizeof(phy_cfg_cmd), &phy_cfg_cmd); |
| } |
| |
| int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) |
| { |
| struct iwl_notification_wait calib_wait; |
| static const u16 init_complete[] = { |
| INIT_COMPLETE_NOTIF, |
| CALIB_RES_NOTIF_PHY_DB |
| }; |
| int ret; |
| |
| if (iwl_mvm_has_unified_ucode(mvm)) |
| return iwl_run_unified_mvm_ucode(mvm, true); |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| mvm->rfkill_safe_init_done = false; |
| |
| iwl_init_notification_wait(&mvm->notif_wait, |
| &calib_wait, |
| init_complete, |
| ARRAY_SIZE(init_complete), |
| iwl_wait_phy_db_entry, |
| mvm->phy_db); |
| |
| /* Will also start the device */ |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_INIT); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start INIT ucode: %d\n", ret); |
| goto remove_notif; |
| } |
| |
| if (mvm->trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_8000) { |
| ret = iwl_mvm_send_bt_init_conf(mvm); |
| if (ret) |
| goto remove_notif; |
| } |
| |
| /* Read the NVM only at driver load time, no need to do this twice */ |
| if (read_nvm) { |
| ret = iwl_nvm_init(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to read NVM: %d\n", ret); |
| goto remove_notif; |
| } |
| } |
| |
| /* In case we read the NVM from external file, load it to the NIC */ |
| if (mvm->nvm_file_name) |
| iwl_mvm_load_nvm_to_nic(mvm); |
| |
| WARN_ONCE(mvm->nvm_data->nvm_version < mvm->trans->cfg->nvm_ver, |
| "Too old NVM version (0x%0x, required = 0x%0x)", |
| mvm->nvm_data->nvm_version, mvm->trans->cfg->nvm_ver); |
| |
| /* |
| * abort after reading the nvm in case RF Kill is on, we will complete |
| * the init seq later when RF kill will switch to off |
| */ |
| if (iwl_mvm_is_radio_hw_killed(mvm)) { |
| IWL_DEBUG_RF_KILL(mvm, |
| "jump over all phy activities due to RF kill\n"); |
| goto remove_notif; |
| } |
| |
| mvm->rfkill_safe_init_done = true; |
| |
| /* Send TX valid antennas before triggering calibrations */ |
| ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); |
| if (ret) |
| goto remove_notif; |
| |
| ret = iwl_send_phy_cfg_cmd(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to run INIT calibrations: %d\n", |
| ret); |
| goto remove_notif; |
| } |
| |
| /* |
| * Some things may run in the background now, but we |
| * just wait for the calibration complete notification. |
| */ |
| ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, |
| MVM_UCODE_CALIB_TIMEOUT); |
| if (!ret) |
| goto out; |
| |
| if (iwl_mvm_is_radio_hw_killed(mvm)) { |
| IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); |
| ret = 0; |
| } else { |
| IWL_ERR(mvm, "Failed to run INIT calibrations: %d\n", |
| ret); |
| } |
| |
| goto out; |
| |
| remove_notif: |
| iwl_remove_notification(&mvm->notif_wait, &calib_wait); |
| out: |
| mvm->rfkill_safe_init_done = false; |
| if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) { |
| /* we want to debug INIT and we have no NVM - fake */ |
| mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) + |
| sizeof(struct ieee80211_channel) + |
| sizeof(struct ieee80211_rate), |
| GFP_KERNEL); |
| if (!mvm->nvm_data) |
| return -ENOMEM; |
| mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; |
| mvm->nvm_data->bands[0].n_channels = 1; |
| mvm->nvm_data->bands[0].n_bitrates = 1; |
| mvm->nvm_data->bands[0].bitrates = |
| (void *)mvm->nvm_data->channels + 1; |
| mvm->nvm_data->bands[0].bitrates->hw_value = 10; |
| } |
| |
| return ret; |
| } |
| |
| static int iwl_mvm_config_ltr(struct iwl_mvm *mvm) |
| { |
| struct iwl_ltr_config_cmd cmd = { |
| .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE), |
| }; |
| |
| if (!mvm->trans->ltr_enabled) |
| return 0; |
| |
| return iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0, |
| sizeof(cmd), &cmd); |
| } |
| |
| #ifdef CONFIG_ACPI |
| static inline int iwl_mvm_sar_set_profile(struct iwl_mvm *mvm, |
| union acpi_object *table, |
| struct iwl_mvm_sar_profile *profile, |
| bool enabled) |
| { |
| int i; |
| |
| profile->enabled = enabled; |
| |
| for (i = 0; i < ACPI_SAR_TABLE_SIZE; i++) { |
| if ((table[i].type != ACPI_TYPE_INTEGER) || |
| (table[i].integer.value > U8_MAX)) |
| return -EINVAL; |
| |
| profile->table[i] = table[i].integer.value; |
| } |
| |
| return 0; |
| } |
| |
| static int iwl_mvm_sar_get_wrds_table(struct iwl_mvm *mvm) |
| { |
| union acpi_object *wifi_pkg, *table, *data; |
| bool enabled; |
| int ret, tbl_rev; |
| |
| data = iwl_acpi_get_object(mvm->dev, ACPI_WRDS_METHOD); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, |
| ACPI_WRDS_WIFI_DATA_SIZE, &tbl_rev); |
| if (IS_ERR(wifi_pkg)) { |
| ret = PTR_ERR(wifi_pkg); |
| goto out_free; |
| } |
| |
| if (wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER || |
| tbl_rev != 0) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| enabled = !!(wifi_pkg->package.elements[1].integer.value); |
| |
| /* position of the actual table */ |
| table = &wifi_pkg->package.elements[2]; |
| |
| /* The profile from WRDS is officially profile 1, but goes |
| * into sar_profiles[0] (because we don't have a profile 0). |
| */ |
| ret = iwl_mvm_sar_set_profile(mvm, table, &mvm->sar_profiles[0], |
| enabled); |
| out_free: |
| kfree(data); |
| return ret; |
| } |
| |
| static int iwl_mvm_sar_get_ewrd_table(struct iwl_mvm *mvm) |
| { |
| union acpi_object *wifi_pkg, *data; |
| bool enabled; |
| int i, n_profiles, ret, tbl_rev; |
| |
| data = iwl_acpi_get_object(mvm->dev, ACPI_EWRD_METHOD); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, |
| ACPI_EWRD_WIFI_DATA_SIZE, &tbl_rev); |
| if (IS_ERR(wifi_pkg)) { |
| ret = PTR_ERR(wifi_pkg); |
| goto out_free; |
| } |
| |
| if ((wifi_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) || |
| (wifi_pkg->package.elements[2].type != ACPI_TYPE_INTEGER) || |
| tbl_rev != 0) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| enabled = !!(wifi_pkg->package.elements[1].integer.value); |
| n_profiles = wifi_pkg->package.elements[2].integer.value; |
| |
| /* |
| * Check the validity of n_profiles. The EWRD profiles start |
| * from index 1, so the maximum value allowed here is |
| * ACPI_SAR_PROFILES_NUM - 1. |
| */ |
| if (n_profiles <= 0 || n_profiles >= ACPI_SAR_PROFILE_NUM) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| for (i = 0; i < n_profiles; i++) { |
| /* the tables start at element 3 */ |
| int pos = 3; |
| |
| /* The EWRD profiles officially go from 2 to 4, but we |
| * save them in sar_profiles[1-3] (because we don't |
| * have profile 0). So in the array we start from 1. |
| */ |
| ret = iwl_mvm_sar_set_profile(mvm, |
| &wifi_pkg->package.elements[pos], |
| &mvm->sar_profiles[i + 1], |
| enabled); |
| if (ret < 0) |
| break; |
| |
| /* go to the next table */ |
| pos += ACPI_SAR_TABLE_SIZE; |
| } |
| |
| out_free: |
| kfree(data); |
| return ret; |
| } |
| |
| static int iwl_mvm_sar_get_wgds_table(struct iwl_mvm *mvm) |
| { |
| union acpi_object *wifi_pkg, *data; |
| int i, j, ret, tbl_rev; |
| int idx = 1; |
| |
| data = iwl_acpi_get_object(mvm->dev, ACPI_WGDS_METHOD); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, |
| ACPI_WGDS_WIFI_DATA_SIZE, &tbl_rev); |
| if (IS_ERR(wifi_pkg)) { |
| ret = PTR_ERR(wifi_pkg); |
| goto out_free; |
| } |
| |
| if (tbl_rev != 0) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| mvm->geo_rev = tbl_rev; |
| for (i = 0; i < ACPI_NUM_GEO_PROFILES; i++) { |
| for (j = 0; j < ACPI_GEO_TABLE_SIZE; j++) { |
| union acpi_object *entry; |
| |
| entry = &wifi_pkg->package.elements[idx++]; |
| if ((entry->type != ACPI_TYPE_INTEGER) || |
| (entry->integer.value > U8_MAX)) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| mvm->geo_profiles[i].values[j] = entry->integer.value; |
| } |
| } |
| ret = 0; |
| out_free: |
| kfree(data); |
| return ret; |
| } |
| |
| int iwl_mvm_sar_select_profile(struct iwl_mvm *mvm, int prof_a, int prof_b) |
| { |
| union { |
| struct iwl_dev_tx_power_cmd v5; |
| struct iwl_dev_tx_power_cmd_v4 v4; |
| } cmd; |
| int i, j, idx; |
| int profs[ACPI_SAR_NUM_CHAIN_LIMITS] = { prof_a, prof_b }; |
| int len; |
| |
| BUILD_BUG_ON(ACPI_SAR_NUM_CHAIN_LIMITS < 2); |
| BUILD_BUG_ON(ACPI_SAR_NUM_CHAIN_LIMITS * ACPI_SAR_NUM_SUB_BANDS != |
| ACPI_SAR_TABLE_SIZE); |
| |
| cmd.v5.v3.set_mode = cpu_to_le32(IWL_TX_POWER_MODE_SET_CHAINS); |
| |
| if (fw_has_api(&mvm->fw->ucode_capa, |
| IWL_UCODE_TLV_API_REDUCE_TX_POWER)) |
| len = sizeof(cmd.v5); |
| else if (fw_has_capa(&mvm->fw->ucode_capa, |
| IWL_UCODE_TLV_CAPA_TX_POWER_ACK)) |
| len = sizeof(cmd.v4); |
| else |
| len = sizeof(cmd.v4.v3); |
| |
| for (i = 0; i < ACPI_SAR_NUM_CHAIN_LIMITS; i++) { |
| struct iwl_mvm_sar_profile *prof; |
| |
| /* don't allow SAR to be disabled (profile 0 means disable) */ |
| if (profs[i] == 0) |
| return -EPERM; |
| |
| /* we are off by one, so allow up to ACPI_SAR_PROFILE_NUM */ |
| if (profs[i] > ACPI_SAR_PROFILE_NUM) |
| return -EINVAL; |
| |
| /* profiles go from 1 to 4, so decrement to access the array */ |
| prof = &mvm->sar_profiles[profs[i] - 1]; |
| |
| /* if the profile is disabled, do nothing */ |
| if (!prof->enabled) { |
| IWL_DEBUG_RADIO(mvm, "SAR profile %d is disabled.\n", |
| profs[i]); |
| /* if one of the profiles is disabled, we fail all */ |
| return -ENOENT; |
| } |
| |
| IWL_DEBUG_INFO(mvm, |
| "SAR EWRD: chain %d profile index %d\n", |
| i, profs[i]); |
| IWL_DEBUG_RADIO(mvm, " Chain[%d]:\n", i); |
| for (j = 0; j < ACPI_SAR_NUM_SUB_BANDS; j++) { |
| idx = (i * ACPI_SAR_NUM_SUB_BANDS) + j; |
| cmd.v5.v3.per_chain_restriction[i][j] = |
| cpu_to_le16(prof->table[idx]); |
| IWL_DEBUG_RADIO(mvm, " Band[%d] = %d * .125dBm\n", |
| j, prof->table[idx]); |
| } |
| } |
| |
| IWL_DEBUG_RADIO(mvm, "Sending REDUCE_TX_POWER_CMD per chain\n"); |
| |
| return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, len, &cmd); |
| } |
| |
| static bool iwl_mvm_sar_geo_support(struct iwl_mvm *mvm) |
| { |
| /* |
| * The GEO_TX_POWER_LIMIT command is not supported on earlier |
| * firmware versions. Unfortunately, we don't have a TLV API |
| * flag to rely on, so rely on the major version which is in |
| * the first byte of ucode_ver. This was implemented |
| * initially on version 38 and then backported to 17. It was |
| * also backported to 29, but only for 7265D devices. The |
| * intention was to have it in 36 as well, but not all 8000 |
| * family got this feature enabled. The 8000 family is the |
| * only one using version 36, so skip this version entirely. |
| */ |
| return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 38 || |
| IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 17 || |
| (IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 29 && |
| ((mvm->trans->hw_rev & CSR_HW_REV_TYPE_MSK) == |
| CSR_HW_REV_TYPE_7265D)); |
| } |
| |
| int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm) |
| { |
| struct iwl_geo_tx_power_profiles_resp *resp; |
| int ret; |
| u16 len; |
| void *data; |
| struct iwl_geo_tx_power_profiles_cmd geo_cmd; |
| struct iwl_geo_tx_power_profiles_cmd_v1 geo_cmd_v1; |
| struct iwl_host_cmd cmd; |
| |
| if (fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_SAR_TABLE_VER)) { |
| geo_cmd.ops = |
| cpu_to_le32(IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE); |
| len = sizeof(geo_cmd); |
| data = &geo_cmd; |
| } else { |
| geo_cmd_v1.ops = |
| cpu_to_le32(IWL_PER_CHAIN_OFFSET_GET_CURRENT_TABLE); |
| len = sizeof(geo_cmd_v1); |
| data = &geo_cmd_v1; |
| } |
| |
| cmd = (struct iwl_host_cmd){ |
| .id = WIDE_ID(PHY_OPS_GROUP, GEO_TX_POWER_LIMIT), |
| .len = { len, }, |
| .flags = CMD_WANT_SKB, |
| .data = { data }, |
| }; |
| |
| if (!iwl_mvm_sar_geo_support(mvm)) |
| return -EOPNOTSUPP; |
| |
| ret = iwl_mvm_send_cmd(mvm, &cmd); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to get geographic profile info %d\n", ret); |
| return ret; |
| } |
| |
| resp = (void *)cmd.resp_pkt->data; |
| ret = le32_to_cpu(resp->profile_idx); |
| if (WARN_ON(ret > ACPI_NUM_GEO_PROFILES)) { |
| ret = -EIO; |
| IWL_WARN(mvm, "Invalid geographic profile idx (%d)\n", ret); |
| } |
| |
| iwl_free_resp(&cmd); |
| return ret; |
| } |
| |
| static int iwl_mvm_sar_geo_init(struct iwl_mvm *mvm) |
| { |
| struct iwl_geo_tx_power_profiles_cmd cmd = { |
| .ops = cpu_to_le32(IWL_PER_CHAIN_OFFSET_SET_TABLES), |
| }; |
| int ret, i, j; |
| u16 cmd_wide_id = WIDE_ID(PHY_OPS_GROUP, GEO_TX_POWER_LIMIT); |
| |
| if (!iwl_mvm_sar_geo_support(mvm)) |
| return 0; |
| |
| ret = iwl_mvm_sar_get_wgds_table(mvm); |
| if (ret < 0) { |
| IWL_DEBUG_RADIO(mvm, |
| "Geo SAR BIOS table invalid or unavailable. (%d)\n", |
| ret); |
| /* we don't fail if the table is not available */ |
| return 0; |
| } |
| |
| IWL_DEBUG_RADIO(mvm, "Sending GEO_TX_POWER_LIMIT\n"); |
| |
| BUILD_BUG_ON(ACPI_NUM_GEO_PROFILES * ACPI_WGDS_NUM_BANDS * |
| ACPI_WGDS_TABLE_SIZE + 1 != ACPI_WGDS_WIFI_DATA_SIZE); |
| |
| BUILD_BUG_ON(ACPI_NUM_GEO_PROFILES > IWL_NUM_GEO_PROFILES); |
| |
| for (i = 0; i < ACPI_NUM_GEO_PROFILES; i++) { |
| struct iwl_per_chain_offset *chain = |
| (struct iwl_per_chain_offset *)&cmd.table[i]; |
| |
| for (j = 0; j < ACPI_WGDS_NUM_BANDS; j++) { |
| u8 *value; |
| |
| value = &mvm->geo_profiles[i].values[j * |
| ACPI_GEO_PER_CHAIN_SIZE]; |
| chain[j].max_tx_power = cpu_to_le16(value[0]); |
| chain[j].chain_a = value[1]; |
| chain[j].chain_b = value[2]; |
| IWL_DEBUG_RADIO(mvm, |
| "SAR geographic profile[%d] Band[%d]: chain A = %d chain B = %d max_tx_power = %d\n", |
| i, j, value[1], value[2], value[0]); |
| } |
| } |
| |
| cmd.table_revision = cpu_to_le32(mvm->geo_rev); |
| |
| if (!fw_has_api(&mvm->fw->ucode_capa, |
| IWL_UCODE_TLV_API_SAR_TABLE_VER)) { |
| return iwl_mvm_send_cmd_pdu(mvm, cmd_wide_id, 0, |
| sizeof(struct iwl_geo_tx_power_profiles_cmd_v1), |
| &cmd); |
| } |
| |
| return iwl_mvm_send_cmd_pdu(mvm, cmd_wide_id, 0, sizeof(cmd), &cmd); |
| } |
| |
| static int iwl_mvm_get_ppag_table(struct iwl_mvm *mvm) |
| { |
| union acpi_object *wifi_pkg, *data, *enabled; |
| int i, j, ret, tbl_rev; |
| int idx = 2; |
| |
| mvm->ppag_table.enabled = cpu_to_le32(0); |
| data = iwl_acpi_get_object(mvm->dev, ACPI_PPAG_METHOD); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| |
| wifi_pkg = iwl_acpi_get_wifi_pkg(mvm->dev, data, |
| ACPI_PPAG_WIFI_DATA_SIZE, &tbl_rev); |
| |
| if (IS_ERR(wifi_pkg)) { |
| ret = PTR_ERR(wifi_pkg); |
| goto out_free; |
| } |
| |
| if (tbl_rev != 0) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| enabled = &wifi_pkg->package.elements[1]; |
| if (enabled->type != ACPI_TYPE_INTEGER || |
| (enabled->integer.value != 0 && enabled->integer.value != 1)) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| mvm->ppag_table.enabled = cpu_to_le32(enabled->integer.value); |
| if (!mvm->ppag_table.enabled) { |
| ret = 0; |
| goto out_free; |
| } |
| |
| /* |
| * read, verify gain values and save them into the PPAG table. |
| * first sub-band (j=0) corresponds to Low-Band (2.4GHz), and the |
| * following sub-bands to High-Band (5GHz). |
| */ |
| for (i = 0; i < ACPI_PPAG_NUM_CHAINS; i++) { |
| for (j = 0; j < ACPI_PPAG_NUM_SUB_BANDS; j++) { |
| union acpi_object *ent; |
| |
| ent = &wifi_pkg->package.elements[idx++]; |
| if (ent->type != ACPI_TYPE_INTEGER || |
| (j == 0 && ent->integer.value > ACPI_PPAG_MAX_LB) || |
| (j == 0 && ent->integer.value < ACPI_PPAG_MIN_LB) || |
| (j != 0 && ent->integer.value > ACPI_PPAG_MAX_HB) || |
| (j != 0 && ent->integer.value < ACPI_PPAG_MIN_HB)) { |
| mvm->ppag_table.enabled = cpu_to_le32(0); |
| ret = -EINVAL; |
| goto out_free; |
| } |
| mvm->ppag_table.gain[i][j] = ent->integer.value; |
| } |
| } |
| ret = 0; |
| out_free: |
| kfree(data); |
| return ret; |
| } |
| |
| int iwl_mvm_ppag_send_cmd(struct iwl_mvm *mvm) |
| { |
| int i, j, ret; |
| |
| if (!fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_SET_PPAG)) { |
| IWL_DEBUG_RADIO(mvm, |
| "PPAG capability not supported by FW, command not sent.\n"); |
| return 0; |
| } |
| |
| IWL_DEBUG_RADIO(mvm, "Sending PER_PLATFORM_ANT_GAIN_CMD\n"); |
| IWL_DEBUG_RADIO(mvm, "PPAG is %s\n", |
| mvm->ppag_table.enabled ? "enabled" : "disabled"); |
| |
| for (i = 0; i < ACPI_PPAG_NUM_CHAINS; i++) { |
| for (j = 0; j < ACPI_PPAG_NUM_SUB_BANDS; j++) { |
| IWL_DEBUG_RADIO(mvm, |
| "PPAG table: chain[%d] band[%d]: gain = %d\n", |
| i, j, mvm->ppag_table.gain[i][j]); |
| } |
| } |
| |
| ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(PHY_OPS_GROUP, |
| PER_PLATFORM_ANT_GAIN_CMD), |
| 0, sizeof(mvm->ppag_table), |
| &mvm->ppag_table); |
| if (ret < 0) |
| IWL_ERR(mvm, "failed to send PER_PLATFORM_ANT_GAIN_CMD (%d)\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static int iwl_mvm_ppag_init(struct iwl_mvm *mvm) |
| { |
| int ret; |
| |
| ret = iwl_mvm_get_ppag_table(mvm); |
| if (ret < 0) { |
| IWL_DEBUG_RADIO(mvm, |
| "PPAG BIOS table invalid or unavailable. (%d)\n", |
| ret); |
| return 0; |
| } |
| return iwl_mvm_ppag_send_cmd(mvm); |
| } |
| |
| #else /* CONFIG_ACPI */ |
| static int iwl_mvm_sar_get_wrds_table(struct iwl_mvm *mvm) |
| { |
| return -ENOENT; |
| } |
| |
| static int iwl_mvm_sar_get_ewrd_table(struct iwl_mvm *mvm) |
| { |
| return -ENOENT; |
| } |
| |
| static int iwl_mvm_sar_get_wgds_table(struct iwl_mvm *mvm) |
| { |
| return -ENOENT; |
| } |
| |
| static int iwl_mvm_sar_geo_init(struct iwl_mvm *mvm) |
| { |
| return 0; |
| } |
| |
| int iwl_mvm_sar_select_profile(struct iwl_mvm *mvm, int prof_a, |
| int prof_b) |
| { |
| return -ENOENT; |
| } |
| |
| int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm) |
| { |
| return -ENOENT; |
| } |
| |
| int iwl_mvm_ppag_send_cmd(struct iwl_mvm *mvm) |
| { |
| return -ENOENT; |
| } |
| |
| static int iwl_mvm_ppag_init(struct iwl_mvm *mvm) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_ACPI */ |
| |
| void iwl_mvm_send_recovery_cmd(struct iwl_mvm *mvm, u32 flags) |
| { |
| u32 error_log_size = mvm->fw->ucode_capa.error_log_size; |
| int ret; |
| u32 resp; |
| |
| struct iwl_fw_error_recovery_cmd recovery_cmd = { |
| .flags = cpu_to_le32(flags), |
| .buf_size = 0, |
| }; |
| struct iwl_host_cmd host_cmd = { |
| .id = WIDE_ID(SYSTEM_GROUP, FW_ERROR_RECOVERY_CMD), |
| .flags = CMD_WANT_SKB, |
| .data = {&recovery_cmd, }, |
| .len = {sizeof(recovery_cmd), }, |
| }; |
| |
| /* no error log was defined in TLV */ |
| if (!error_log_size) |
| return; |
| |
| if (flags & ERROR_RECOVERY_UPDATE_DB) { |
| /* no buf was allocated while HW reset */ |
| if (!mvm->error_recovery_buf) |
| return; |
| |
| host_cmd.data[1] = mvm->error_recovery_buf; |
| host_cmd.len[1] = error_log_size; |
| host_cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; |
| recovery_cmd.buf_size = cpu_to_le32(error_log_size); |
| } |
| |
| ret = iwl_mvm_send_cmd(mvm, &host_cmd); |
| kfree(mvm->error_recovery_buf); |
| mvm->error_recovery_buf = NULL; |
| |
| if (ret) { |
| IWL_ERR(mvm, "Failed to send recovery cmd %d\n", ret); |
| return; |
| } |
| |
| /* skb respond is only relevant in ERROR_RECOVERY_UPDATE_DB */ |
| if (flags & ERROR_RECOVERY_UPDATE_DB) { |
| resp = le32_to_cpu(*(__le32 *)host_cmd.resp_pkt->data); |
| if (resp) |
| IWL_ERR(mvm, |
| "Failed to send recovery cmd blob was invalid %d\n", |
| resp); |
| } |
| } |
| |
| static int iwl_mvm_sar_init(struct iwl_mvm *mvm) |
| { |
| int ret; |
| |
| ret = iwl_mvm_sar_get_wrds_table(mvm); |
| if (ret < 0) { |
| IWL_DEBUG_RADIO(mvm, |
| "WRDS SAR BIOS table invalid or unavailable. (%d)\n", |
| ret); |
| /* |
| * If not available, don't fail and don't bother with EWRD. |
| * Return 1 to tell that we can't use WGDS either. |
| */ |
| return 1; |
| } |
| |
| ret = iwl_mvm_sar_get_ewrd_table(mvm); |
| /* if EWRD is not available, we can still use WRDS, so don't fail */ |
| if (ret < 0) |
| IWL_DEBUG_RADIO(mvm, |
| "EWRD SAR BIOS table invalid or unavailable. (%d)\n", |
| ret); |
| |
| /* choose profile 1 (WRDS) as default for both chains */ |
| ret = iwl_mvm_sar_select_profile(mvm, 1, 1); |
| |
| /* |
| * If we don't have profile 0 from BIOS, just skip it. This |
| * means that SAR Geo will not be enabled either, even if we |
| * have other valid profiles. |
| */ |
| if (ret == -ENOENT) |
| return 1; |
| |
| return ret; |
| } |
| |
| static int iwl_mvm_load_rt_fw(struct iwl_mvm *mvm) |
| { |
| int ret; |
| |
| if (iwl_mvm_has_unified_ucode(mvm)) |
| return iwl_run_unified_mvm_ucode(mvm, false); |
| |
| ret = iwl_run_init_mvm_ucode(mvm, false); |
| |
| if (ret) { |
| IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); |
| |
| if (iwlmvm_mod_params.init_dbg) |
| return 0; |
| return ret; |
| } |
| |
| iwl_fw_dbg_stop_sync(&mvm->fwrt); |
| iwl_trans_stop_device(mvm->trans); |
| ret = iwl_trans_start_hw(mvm->trans); |
| if (ret) |
| return ret; |
| |
| iwl_dbg_tlv_time_point(&mvm->fwrt, IWL_FW_INI_TIME_POINT_EARLY, NULL); |
| |
| mvm->rfkill_safe_init_done = false; |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_REGULAR); |
| if (ret) |
| return ret; |
| |
| mvm->rfkill_safe_init_done = true; |
| |
| iwl_dbg_tlv_time_point(&mvm->fwrt, IWL_FW_INI_TIME_POINT_AFTER_ALIVE, |
| NULL); |
| |
| return iwl_init_paging(&mvm->fwrt, mvm->fwrt.cur_fw_img); |
| } |
| |
| int iwl_mvm_up(struct iwl_mvm *mvm) |
| { |
| int ret, i; |
| struct ieee80211_channel *chan; |
| struct cfg80211_chan_def chandef; |
| struct ieee80211_supported_band *sband = NULL; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| ret = iwl_trans_start_hw(mvm->trans); |
| if (ret) |
| return ret; |
| |
| ret = iwl_mvm_load_rt_fw(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start RT ucode: %d\n", ret); |
| if (ret != -ERFKILL) |
| iwl_fw_dbg_error_collect(&mvm->fwrt, |
| FW_DBG_TRIGGER_DRIVER); |
| goto error; |
| } |
| |
| iwl_get_shared_mem_conf(&mvm->fwrt); |
| |
| ret = iwl_mvm_sf_update(mvm, NULL, false); |
| if (ret) |
| IWL_ERR(mvm, "Failed to initialize Smart Fifo\n"); |
| |
| if (!iwl_trans_dbg_ini_valid(mvm->trans)) { |
| mvm->fwrt.dump.conf = FW_DBG_INVALID; |
| /* if we have a destination, assume EARLY START */ |
| if (mvm->fw->dbg.dest_tlv) |
| mvm->fwrt.dump.conf = FW_DBG_START_FROM_ALIVE; |
| iwl_fw_start_dbg_conf(&mvm->fwrt, FW_DBG_START_FROM_ALIVE); |
| } |
| |
| ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); |
| if (ret) |
| goto error; |
| |
| if (!iwl_mvm_has_unified_ucode(mvm)) { |
| /* Send phy db control command and then phy db calibration */ |
| ret = iwl_send_phy_db_data(mvm->phy_db); |
| if (ret) |
| goto error; |
| } |
| |
| ret = iwl_send_phy_cfg_cmd(mvm); |
| if (ret) |
| goto error; |
| |
| ret = iwl_mvm_send_bt_init_conf(mvm); |
| if (ret) |
| goto error; |
| |
| /* Init RSS configuration */ |
| if (mvm->trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_22000) { |
| ret = iwl_configure_rxq(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to configure RX queues: %d\n", |
| ret); |
| goto error; |
| } |
| } |
| |
| if (iwl_mvm_has_new_rx_api(mvm)) { |
| ret = iwl_send_rss_cfg_cmd(mvm); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to configure RSS queues: %d\n", |
| ret); |
| goto error; |
| } |
| } |
| |
| /* init the fw <-> mac80211 STA mapping */ |
| for (i = 0; i < ARRAY_SIZE(mvm->fw_id_to_mac_id); i++) |
| RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); |
| |
| mvm->tdls_cs.peer.sta_id = IWL_MVM_INVALID_STA; |
| |
| /* reset quota debouncing buffer - 0xff will yield invalid data */ |
| memset(&mvm->last_quota_cmd, 0xff, sizeof(mvm->last_quota_cmd)); |
| |
| if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_DQA_SUPPORT)) { |
| ret = iwl_mvm_send_dqa_cmd(mvm); |
| if (ret) |
| goto error; |
| } |
| |
| /* Add auxiliary station for scanning */ |
| ret = iwl_mvm_add_aux_sta(mvm); |
| if (ret) |
| goto error; |
| |
| /* Add all the PHY contexts */ |
| i = 0; |
| while (!sband && i < NUM_NL80211_BANDS) |
| sband = mvm->hw->wiphy->bands[i++]; |
| |
| if (WARN_ON_ONCE(!sband)) { |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| chan = &sband->channels[0]; |
| |
| cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_NO_HT); |
| for (i = 0; i < NUM_PHY_CTX; i++) { |
| /* |
| * The channel used here isn't relevant as it's |
| * going to be overwritten in the other flows. |
| * For now use the first channel we have. |
| */ |
| ret = iwl_mvm_phy_ctxt_add(mvm, &mvm->phy_ctxts[i], |
| &chandef, 1, 1); |
| if (ret) |
| goto error; |
| } |
| |
| if (iwl_mvm_is_tt_in_fw(mvm)) { |
| /* in order to give the responsibility of ct-kill and |
| * TX backoff to FW we need to send empty temperature reporting |
| * cmd during init time |
| */ |
| iwl_mvm_send_temp_report_ths_cmd(mvm); |
| } else { |
| /* Initialize tx backoffs to the minimal possible */ |
| iwl_mvm_tt_tx_backoff(mvm, 0); |
| } |
| |
| #ifdef CONFIG_THERMAL |
| /* TODO: read the budget from BIOS / Platform NVM */ |
| |
| /* |
| * In case there is no budget from BIOS / Platform NVM the default |
| * budget should be 2000mW (cooling state 0). |
| */ |
| if (iwl_mvm_is_ctdp_supported(mvm)) { |
| ret = iwl_mvm_ctdp_command(mvm, CTDP_CMD_OPERATION_START, |
| mvm->cooling_dev.cur_state); |
| if (ret) |
| goto error; |
| } |
| #endif |
| |
| if (!fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_SET_LTR_GEN2)) |
| WARN_ON(iwl_mvm_config_ltr(mvm)); |
| |
| ret = iwl_mvm_power_update_device(mvm); |
| if (ret) |
| goto error; |
| |
| /* |
| * RTNL is not taken during Ct-kill, but we don't need to scan/Tx |
| * anyway, so don't init MCC. |
| */ |
| if (!test_bit(IWL_MVM_STATUS_HW_CTKILL, &mvm->status)) { |
| ret = iwl_mvm_init_mcc(mvm); |
| if (ret) |
| goto error; |
| } |
| |
| if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN)) { |
| mvm->scan_type = IWL_SCAN_TYPE_NOT_SET; |
| mvm->hb_scan_type = IWL_SCAN_TYPE_NOT_SET; |
| ret = iwl_mvm_config_scan(mvm); |
| if (ret) |
| goto error; |
| } |
| |
| if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) |
| iwl_mvm_send_recovery_cmd(mvm, ERROR_RECOVERY_UPDATE_DB); |
| |
| if (iwl_acpi_get_eckv(mvm->dev, &mvm->ext_clock_valid)) |
| IWL_DEBUG_INFO(mvm, "ECKV table doesn't exist in BIOS\n"); |
| |
| ret = iwl_mvm_ppag_init(mvm); |
| if (ret) |
| goto error; |
| |
| ret = iwl_mvm_sar_init(mvm); |
| if (ret == 0) { |
| ret = iwl_mvm_sar_geo_init(mvm); |
| } else if (ret > 0 && !iwl_mvm_sar_get_wgds_table(mvm)) { |
| /* |
| * If basic SAR is not available, we check for WGDS, |
| * which should *not* be available either. If it is |
| * available, issue an error, because we can't use SAR |
| * Geo without basic SAR. |
| */ |
| IWL_ERR(mvm, "BIOS contains WGDS but no WRDS\n"); |
| } |
| |
| if (ret < 0) |
| goto error; |
| |
| iwl_mvm_leds_sync(mvm); |
| |
| IWL_DEBUG_INFO(mvm, "RT uCode started.\n"); |
| return 0; |
| error: |
| if (!iwlmvm_mod_params.init_dbg || !ret) |
| iwl_mvm_stop_device(mvm); |
| return ret; |
| } |
| |
| int iwl_mvm_load_d3_fw(struct iwl_mvm *mvm) |
| { |
| int ret, i; |
| |
| lockdep_assert_held(&mvm->mutex); |
| |
| ret = iwl_trans_start_hw(mvm->trans); |
| if (ret) |
| return ret; |
| |
| ret = iwl_mvm_load_ucode_wait_alive(mvm, IWL_UCODE_WOWLAN); |
| if (ret) { |
| IWL_ERR(mvm, "Failed to start WoWLAN firmware: %d\n", ret); |
| goto error; |
| } |
| |
| ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); |
| if (ret) |
| goto error; |
| |
| /* Send phy db control command and then phy db calibration*/ |
| ret = iwl_send_phy_db_data(mvm->phy_db); |
| if (ret) |
| goto error; |
| |
| ret = iwl_send_phy_cfg_cmd(mvm); |
| if (ret) |
| goto error; |
| |
| /* init the fw <-> mac80211 STA mapping */ |
| for (i = 0; i < ARRAY_SIZE(mvm->fw_id_to_mac_id); i++) |
| RCU_INIT_POINTER(mvm->fw_id_to_mac_id[i], NULL); |
| |
| /* Add auxiliary station for scanning */ |
| ret = iwl_mvm_add_aux_sta(mvm); |
| if (ret) |
| goto error; |
| |
| return 0; |
| error: |
| iwl_mvm_stop_device(mvm); |
| return ret; |
| } |
| |
| void iwl_mvm_rx_card_state_notif(struct iwl_mvm *mvm, |
| struct iwl_rx_cmd_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_card_state_notif *card_state_notif = (void *)pkt->data; |
| u32 flags = le32_to_cpu(card_state_notif->flags); |
| |
| IWL_DEBUG_RF_KILL(mvm, "Card state received: HW:%s SW:%s CT:%s\n", |
| (flags & HW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & SW_CARD_DISABLED) ? "Kill" : "On", |
| (flags & CT_KILL_CARD_DISABLED) ? |
| "Reached" : "Not reached"); |
| } |
| |
| void iwl_mvm_rx_mfuart_notif(struct iwl_mvm *mvm, |
| struct iwl_rx_cmd_buffer *rxb) |
| { |
| struct iwl_rx_packet *pkt = rxb_addr(rxb); |
| struct iwl_mfuart_load_notif *mfuart_notif = (void *)pkt->data; |
| |
| IWL_DEBUG_INFO(mvm, |
| "MFUART: installed ver: 0x%08x, external ver: 0x%08x, status: 0x%08x, duration: 0x%08x\n", |
| le32_to_cpu(mfuart_notif->installed_ver), |
| le32_to_cpu(mfuart_notif->external_ver), |
| le32_to_cpu(mfuart_notif->status), |
| le32_to_cpu(mfuart_notif->duration)); |
| |
| if (iwl_rx_packet_payload_len(pkt) == sizeof(*mfuart_notif)) |
| IWL_DEBUG_INFO(mvm, |
| "MFUART: image size: 0x%08x\n", |
| le32_to_cpu(mfuart_notif->image_size)); |
| } |