| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Maxim MAX77620 MFD Driver |
| * |
| * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved. |
| * |
| * Author: |
| * Laxman Dewangan <ldewangan@nvidia.com> |
| * Chaitanya Bandi <bandik@nvidia.com> |
| * Mallikarjun Kasoju <mkasoju@nvidia.com> |
| */ |
| |
| /****************** Teminology used in driver ******************** |
| * Here are some terminology used from datasheet for quick reference: |
| * Flexible Power Sequence (FPS): |
| * The Flexible Power Sequencer (FPS) allows each regulator to power up under |
| * hardware or software control. Additionally, each regulator can power on |
| * independently or among a group of other regulators with an adjustable |
| * power-up and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can |
| * be programmed to be part of a sequence allowing external regulators to be |
| * sequenced along with internal regulators. 32KHz clock can be programmed to |
| * be part of a sequence. |
| * There is 3 FPS confguration registers and all resources are configured to |
| * any of these FPS or no FPS. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/max77620.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| static struct max77620_chip *max77620_scratch; |
| |
| static const struct resource gpio_resources[] = { |
| DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO), |
| }; |
| |
| static const struct resource power_resources[] = { |
| DEFINE_RES_IRQ(MAX77620_IRQ_LBT_MBATLOW), |
| }; |
| |
| static const struct resource rtc_resources[] = { |
| DEFINE_RES_IRQ(MAX77620_IRQ_TOP_RTC), |
| }; |
| |
| static const struct resource thermal_resources[] = { |
| DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM1), |
| DEFINE_RES_IRQ(MAX77620_IRQ_LBT_TJALRM2), |
| }; |
| |
| static const struct regmap_irq max77620_top_irqs[] = { |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GLBL, 0, MAX77620_IRQ_TOP_GLBL_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_SD, 0, MAX77620_IRQ_TOP_SD_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_LDO, 0, MAX77620_IRQ_TOP_LDO_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_GPIO, 0, MAX77620_IRQ_TOP_GPIO_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_RTC, 0, MAX77620_IRQ_TOP_RTC_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_32K, 0, MAX77620_IRQ_TOP_32K_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_TOP_ONOFF, 0, MAX77620_IRQ_TOP_ONOFF_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_LBT_MBATLOW, 1, MAX77620_IRQ_LBM_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM1, 1, MAX77620_IRQ_TJALRM1_MASK), |
| REGMAP_IRQ_REG(MAX77620_IRQ_LBT_TJALRM2, 1, MAX77620_IRQ_TJALRM2_MASK), |
| }; |
| |
| static const struct mfd_cell max77620_children[] = { |
| { .name = "max77620-pinctrl", }, |
| { .name = "max77620-clock", }, |
| { .name = "max77620-pmic", }, |
| { .name = "max77620-watchdog", }, |
| { |
| .name = "max77620-gpio", |
| .resources = gpio_resources, |
| .num_resources = ARRAY_SIZE(gpio_resources), |
| }, { |
| .name = "max77620-rtc", |
| .resources = rtc_resources, |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| }, { |
| .name = "max77620-power", |
| .resources = power_resources, |
| .num_resources = ARRAY_SIZE(power_resources), |
| }, { |
| .name = "max77620-thermal", |
| .resources = thermal_resources, |
| .num_resources = ARRAY_SIZE(thermal_resources), |
| }, |
| }; |
| |
| static const struct mfd_cell max20024_children[] = { |
| { .name = "max20024-pinctrl", }, |
| { .name = "max77620-clock", }, |
| { .name = "max20024-pmic", }, |
| { .name = "max77620-watchdog", }, |
| { |
| .name = "max77620-gpio", |
| .resources = gpio_resources, |
| .num_resources = ARRAY_SIZE(gpio_resources), |
| }, { |
| .name = "max77620-rtc", |
| .resources = rtc_resources, |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| }, { |
| .name = "max20024-power", |
| .resources = power_resources, |
| .num_resources = ARRAY_SIZE(power_resources), |
| }, |
| }; |
| |
| static const struct mfd_cell max77663_children[] = { |
| { .name = "max77620-pinctrl", }, |
| { .name = "max77620-clock", }, |
| { .name = "max77663-pmic", }, |
| { .name = "max77620-watchdog", }, |
| { |
| .name = "max77620-gpio", |
| .resources = gpio_resources, |
| .num_resources = ARRAY_SIZE(gpio_resources), |
| }, { |
| .name = "max77620-rtc", |
| .resources = rtc_resources, |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| }, { |
| .name = "max77663-power", |
| .resources = power_resources, |
| .num_resources = ARRAY_SIZE(power_resources), |
| }, |
| }; |
| |
| static const struct regmap_range max77620_readable_ranges[] = { |
| regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), |
| }; |
| |
| static const struct regmap_access_table max77620_readable_table = { |
| .yes_ranges = max77620_readable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(max77620_readable_ranges), |
| }; |
| |
| static const struct regmap_range max20024_readable_ranges[] = { |
| regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), |
| regmap_reg_range(MAX20024_REG_MAX_ADD, MAX20024_REG_MAX_ADD), |
| }; |
| |
| static const struct regmap_access_table max20024_readable_table = { |
| .yes_ranges = max20024_readable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(max20024_readable_ranges), |
| }; |
| |
| static const struct regmap_range max77620_writable_ranges[] = { |
| regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), |
| }; |
| |
| static const struct regmap_access_table max77620_writable_table = { |
| .yes_ranges = max77620_writable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(max77620_writable_ranges), |
| }; |
| |
| static const struct regmap_range max77620_cacheable_ranges[] = { |
| regmap_reg_range(MAX77620_REG_SD0_CFG, MAX77620_REG_LDO_CFG3), |
| regmap_reg_range(MAX77620_REG_FPS_CFG0, MAX77620_REG_FPS_SD3), |
| }; |
| |
| static const struct regmap_access_table max77620_volatile_table = { |
| .no_ranges = max77620_cacheable_ranges, |
| .n_no_ranges = ARRAY_SIZE(max77620_cacheable_ranges), |
| }; |
| |
| static const struct regmap_config max77620_regmap_config = { |
| .name = "power-slave", |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = MAX77620_REG_DVSSD4 + 1, |
| .cache_type = REGCACHE_RBTREE, |
| .rd_table = &max77620_readable_table, |
| .wr_table = &max77620_writable_table, |
| .volatile_table = &max77620_volatile_table, |
| }; |
| |
| static const struct regmap_config max20024_regmap_config = { |
| .name = "power-slave", |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = MAX20024_REG_MAX_ADD + 1, |
| .cache_type = REGCACHE_RBTREE, |
| .rd_table = &max20024_readable_table, |
| .wr_table = &max77620_writable_table, |
| .volatile_table = &max77620_volatile_table, |
| }; |
| |
| static const struct regmap_range max77663_readable_ranges[] = { |
| regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5), |
| }; |
| |
| static const struct regmap_access_table max77663_readable_table = { |
| .yes_ranges = max77663_readable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges), |
| }; |
| |
| static const struct regmap_range max77663_writable_ranges[] = { |
| regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5), |
| }; |
| |
| static const struct regmap_access_table max77663_writable_table = { |
| .yes_ranges = max77663_writable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges), |
| }; |
| |
| static const struct regmap_config max77663_regmap_config = { |
| .name = "power-slave", |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = MAX77620_REG_CID5 + 1, |
| .cache_type = REGCACHE_RBTREE, |
| .rd_table = &max77663_readable_table, |
| .wr_table = &max77663_writable_table, |
| .volatile_table = &max77620_volatile_table, |
| }; |
| |
| /* |
| * MAX77620 and MAX20024 has the following steps of the interrupt handling |
| * for TOP interrupts: |
| * 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. |
| * 2. Read IRQTOP and service the interrupt. |
| * 3. Once all interrupts has been checked and serviced, the interrupt service |
| * routine un-masks the hardware interrupt line by clearing GLBLM. |
| */ |
| static int max77620_irq_global_mask(void *irq_drv_data) |
| { |
| struct max77620_chip *chip = irq_drv_data; |
| int ret; |
| |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT, |
| MAX77620_GLBLM_MASK, MAX77620_GLBLM_MASK); |
| if (ret < 0) |
| dev_err(chip->dev, "Failed to set GLBLM: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int max77620_irq_global_unmask(void *irq_drv_data) |
| { |
| struct max77620_chip *chip = irq_drv_data; |
| int ret; |
| |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_INTENLBT, |
| MAX77620_GLBLM_MASK, 0); |
| if (ret < 0) |
| dev_err(chip->dev, "Failed to reset GLBLM: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static struct regmap_irq_chip max77620_top_irq_chip = { |
| .name = "max77620-top", |
| .irqs = max77620_top_irqs, |
| .num_irqs = ARRAY_SIZE(max77620_top_irqs), |
| .num_regs = 2, |
| .status_base = MAX77620_REG_IRQTOP, |
| .mask_base = MAX77620_REG_IRQTOPM, |
| .handle_pre_irq = max77620_irq_global_mask, |
| .handle_post_irq = max77620_irq_global_unmask, |
| }; |
| |
| /* max77620_get_fps_period_reg_value: Get FPS bit field value from |
| * requested periods. |
| * MAX77620 supports the FPS period of 40, 80, 160, 320, 540, 1280, 2560 |
| * and 5120 microseconds. MAX20024 supports the FPS period of 20, 40, 80, |
| * 160, 320, 540, 1280 and 2560 microseconds. |
| * The FPS register has 3 bits field to set the FPS period as |
| * bits max77620 max20024 |
| * 000 40 20 |
| * 001 80 40 |
| * ::: |
| */ |
| static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, |
| int tperiod) |
| { |
| int fps_min_period; |
| int i; |
| |
| switch (chip->chip_id) { |
| case MAX20024: |
| fps_min_period = MAX20024_FPS_PERIOD_MIN_US; |
| break; |
| case MAX77620: |
| fps_min_period = MAX77620_FPS_PERIOD_MIN_US; |
| break; |
| case MAX77663: |
| fps_min_period = MAX20024_FPS_PERIOD_MIN_US; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < 7; i++) { |
| if (fps_min_period >= tperiod) |
| return i; |
| fps_min_period *= 2; |
| } |
| |
| return i; |
| } |
| |
| /* max77620_config_fps: Configure FPS configuration registers |
| * based on platform specific information. |
| */ |
| static int max77620_config_fps(struct max77620_chip *chip, |
| struct device_node *fps_np) |
| { |
| struct device *dev = chip->dev; |
| unsigned int mask = 0, config = 0; |
| u32 fps_max_period; |
| u32 param_val; |
| int tperiod, fps_id; |
| int ret; |
| char fps_name[10]; |
| |
| switch (chip->chip_id) { |
| case MAX20024: |
| fps_max_period = MAX20024_FPS_PERIOD_MAX_US; |
| break; |
| case MAX77620: |
| fps_max_period = MAX77620_FPS_PERIOD_MAX_US; |
| break; |
| case MAX77663: |
| fps_max_period = MAX20024_FPS_PERIOD_MAX_US; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) { |
| sprintf(fps_name, "fps%d", fps_id); |
| if (of_node_name_eq(fps_np, fps_name)) |
| break; |
| } |
| |
| if (fps_id == MAX77620_FPS_COUNT) { |
| dev_err(dev, "FPS node name %pOFn is not valid\n", fps_np); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32(fps_np, "maxim,shutdown-fps-time-period-us", |
| ¶m_val); |
| if (!ret) { |
| mask |= MAX77620_FPS_TIME_PERIOD_MASK; |
| chip->shutdown_fps_period[fps_id] = min(param_val, |
| fps_max_period); |
| tperiod = max77620_get_fps_period_reg_value(chip, |
| chip->shutdown_fps_period[fps_id]); |
| config |= tperiod << MAX77620_FPS_TIME_PERIOD_SHIFT; |
| } |
| |
| ret = of_property_read_u32(fps_np, "maxim,suspend-fps-time-period-us", |
| ¶m_val); |
| if (!ret) |
| chip->suspend_fps_period[fps_id] = min(param_val, |
| fps_max_period); |
| |
| ret = of_property_read_u32(fps_np, "maxim,fps-event-source", |
| ¶m_val); |
| if (!ret) { |
| if (param_val > 2) { |
| dev_err(dev, "FPS%d event-source invalid\n", fps_id); |
| return -EINVAL; |
| } |
| mask |= MAX77620_FPS_EN_SRC_MASK; |
| config |= param_val << MAX77620_FPS_EN_SRC_SHIFT; |
| if (param_val == 2) { |
| mask |= MAX77620_FPS_ENFPS_SW_MASK; |
| config |= MAX77620_FPS_ENFPS_SW; |
| } |
| } |
| |
| if (!chip->sleep_enable && !chip->enable_global_lpm) { |
| ret = of_property_read_u32(fps_np, |
| "maxim,device-state-on-disabled-event", |
| ¶m_val); |
| if (!ret) { |
| if (param_val == 0) |
| chip->sleep_enable = true; |
| else if (param_val == 1) |
| chip->enable_global_lpm = true; |
| } |
| } |
| |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id, |
| mask, config); |
| if (ret < 0) { |
| dev_err(dev, "Failed to update FPS CFG: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int max77620_initialise_fps(struct max77620_chip *chip) |
| { |
| struct device *dev = chip->dev; |
| struct device_node *fps_np, *fps_child; |
| u8 config; |
| int fps_id; |
| int ret; |
| |
| for (fps_id = 0; fps_id < MAX77620_FPS_COUNT; fps_id++) { |
| chip->shutdown_fps_period[fps_id] = -1; |
| chip->suspend_fps_period[fps_id] = -1; |
| } |
| |
| fps_np = of_get_child_by_name(dev->of_node, "fps"); |
| if (!fps_np) |
| goto skip_fps; |
| |
| for_each_child_of_node(fps_np, fps_child) { |
| ret = max77620_config_fps(chip, fps_child); |
| if (ret < 0) { |
| of_node_put(fps_child); |
| of_node_put(fps_np); |
| return ret; |
| } |
| } |
| of_node_put(fps_np); |
| |
| config = chip->enable_global_lpm ? MAX77620_ONOFFCNFG2_SLP_LPM_MSK : 0; |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, |
| MAX77620_ONOFFCNFG2_SLP_LPM_MSK, config); |
| if (ret < 0) { |
| dev_err(dev, "Failed to update SLP_LPM: %d\n", ret); |
| return ret; |
| } |
| |
| skip_fps: |
| if (chip->chip_id == MAX77663) |
| return 0; |
| |
| /* Enable wake on EN0 pin */ |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, |
| MAX77620_ONOFFCNFG2_WK_EN0, |
| MAX77620_ONOFFCNFG2_WK_EN0); |
| if (ret < 0) { |
| dev_err(dev, "Failed to update WK_EN0: %d\n", ret); |
| return ret; |
| } |
| |
| /* For MAX20024, SLPEN will be POR reset if CLRSE is b11 */ |
| if ((chip->chip_id == MAX20024) && chip->sleep_enable) { |
| config = MAX77620_ONOFFCNFG1_SLPEN | MAX20024_ONOFFCNFG1_CLRSE; |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, |
| config, config); |
| if (ret < 0) { |
| dev_err(dev, "Failed to update SLPEN: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int max77620_read_es_version(struct max77620_chip *chip) |
| { |
| unsigned int val; |
| u8 cid_val[6]; |
| int i; |
| int ret; |
| |
| for (i = MAX77620_REG_CID0; i <= MAX77620_REG_CID5; i++) { |
| ret = regmap_read(chip->rmap, i, &val); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to read CID: %d\n", ret); |
| return ret; |
| } |
| dev_dbg(chip->dev, "CID%d: 0x%02x\n", |
| i - MAX77620_REG_CID0, val); |
| cid_val[i - MAX77620_REG_CID0] = val; |
| } |
| |
| /* CID4 is OTP Version and CID5 is ES version */ |
| dev_info(chip->dev, "PMIC Version OTP:0x%02X and ES:0x%X\n", |
| cid_val[4], MAX77620_CID5_DIDM(cid_val[5])); |
| |
| return ret; |
| } |
| |
| static void max77620_pm_power_off(void) |
| { |
| struct max77620_chip *chip = max77620_scratch; |
| |
| regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, |
| MAX77620_ONOFFCNFG1_SFT_RST, |
| MAX77620_ONOFFCNFG1_SFT_RST); |
| } |
| |
| static int max77620_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| const struct regmap_config *rmap_config; |
| struct max77620_chip *chip; |
| const struct mfd_cell *mfd_cells; |
| int n_mfd_cells; |
| bool pm_off; |
| int ret; |
| |
| chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, chip); |
| chip->dev = &client->dev; |
| chip->irq_base = -1; |
| chip->chip_irq = client->irq; |
| chip->chip_id = (enum max77620_chip_id)id->driver_data; |
| |
| switch (chip->chip_id) { |
| case MAX77620: |
| mfd_cells = max77620_children; |
| n_mfd_cells = ARRAY_SIZE(max77620_children); |
| rmap_config = &max77620_regmap_config; |
| break; |
| case MAX20024: |
| mfd_cells = max20024_children; |
| n_mfd_cells = ARRAY_SIZE(max20024_children); |
| rmap_config = &max20024_regmap_config; |
| break; |
| case MAX77663: |
| mfd_cells = max77663_children; |
| n_mfd_cells = ARRAY_SIZE(max77663_children); |
| rmap_config = &max77663_regmap_config; |
| break; |
| default: |
| dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id); |
| return -EINVAL; |
| } |
| |
| chip->rmap = devm_regmap_init_i2c(client, rmap_config); |
| if (IS_ERR(chip->rmap)) { |
| ret = PTR_ERR(chip->rmap); |
| dev_err(chip->dev, "Failed to initialise regmap: %d\n", ret); |
| return ret; |
| } |
| |
| ret = max77620_read_es_version(chip); |
| if (ret < 0) |
| return ret; |
| |
| max77620_top_irq_chip.irq_drv_data = chip; |
| ret = devm_regmap_add_irq_chip(chip->dev, chip->rmap, client->irq, |
| IRQF_ONESHOT | IRQF_SHARED, |
| chip->irq_base, &max77620_top_irq_chip, |
| &chip->top_irq_data); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to add regmap irq: %d\n", ret); |
| return ret; |
| } |
| |
| ret = max77620_initialise_fps(chip); |
| if (ret < 0) |
| return ret; |
| |
| ret = devm_mfd_add_devices(chip->dev, PLATFORM_DEVID_NONE, |
| mfd_cells, n_mfd_cells, NULL, 0, |
| regmap_irq_get_domain(chip->top_irq_data)); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to add MFD children: %d\n", ret); |
| return ret; |
| } |
| |
| pm_off = of_device_is_system_power_controller(client->dev.of_node); |
| if (pm_off && !pm_power_off) { |
| max77620_scratch = chip; |
| pm_power_off = max77620_pm_power_off; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int max77620_set_fps_period(struct max77620_chip *chip, |
| int fps_id, int time_period) |
| { |
| int period = max77620_get_fps_period_reg_value(chip, time_period); |
| int ret; |
| |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_FPS_CFG0 + fps_id, |
| MAX77620_FPS_TIME_PERIOD_MASK, |
| period << MAX77620_FPS_TIME_PERIOD_SHIFT); |
| if (ret < 0) { |
| dev_err(chip->dev, "Failed to update FPS period: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int max77620_i2c_suspend(struct device *dev) |
| { |
| struct max77620_chip *chip = dev_get_drvdata(dev); |
| struct i2c_client *client = to_i2c_client(dev); |
| unsigned int config; |
| int fps; |
| int ret; |
| |
| for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) { |
| if (chip->suspend_fps_period[fps] < 0) |
| continue; |
| |
| ret = max77620_set_fps_period(chip, fps, |
| chip->suspend_fps_period[fps]); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* |
| * For MAX20024: No need to configure SLPEN on suspend as |
| * it will be configured on Init. |
| */ |
| if (chip->chip_id == MAX20024) |
| goto out; |
| |
| config = (chip->sleep_enable) ? MAX77620_ONOFFCNFG1_SLPEN : 0; |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, |
| MAX77620_ONOFFCNFG1_SLPEN, |
| config); |
| if (ret < 0) { |
| dev_err(dev, "Failed to configure sleep in suspend: %d\n", ret); |
| return ret; |
| } |
| |
| if (chip->chip_id == MAX77663) |
| goto out; |
| |
| /* Disable WK_EN0 */ |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, |
| MAX77620_ONOFFCNFG2_WK_EN0, 0); |
| if (ret < 0) { |
| dev_err(dev, "Failed to configure WK_EN in suspend: %d\n", ret); |
| return ret; |
| } |
| |
| out: |
| disable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static int max77620_i2c_resume(struct device *dev) |
| { |
| struct max77620_chip *chip = dev_get_drvdata(dev); |
| struct i2c_client *client = to_i2c_client(dev); |
| int ret; |
| int fps; |
| |
| for (fps = 0; fps < MAX77620_FPS_COUNT; fps++) { |
| if (chip->shutdown_fps_period[fps] < 0) |
| continue; |
| |
| ret = max77620_set_fps_period(chip, fps, |
| chip->shutdown_fps_period[fps]); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* |
| * For MAX20024: No need to configure WKEN0 on resume as |
| * it is configured on Init. |
| */ |
| if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663) |
| goto out; |
| |
| /* Enable WK_EN0 */ |
| ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, |
| MAX77620_ONOFFCNFG2_WK_EN0, |
| MAX77620_ONOFFCNFG2_WK_EN0); |
| if (ret < 0) { |
| dev_err(dev, "Failed to configure WK_EN0 n resume: %d\n", ret); |
| return ret; |
| } |
| |
| out: |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct i2c_device_id max77620_id[] = { |
| {"max77620", MAX77620}, |
| {"max20024", MAX20024}, |
| {"max77663", MAX77663}, |
| {}, |
| }; |
| |
| static const struct dev_pm_ops max77620_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(max77620_i2c_suspend, max77620_i2c_resume) |
| }; |
| |
| static struct i2c_driver max77620_driver = { |
| .driver = { |
| .name = "max77620", |
| .pm = &max77620_pm_ops, |
| }, |
| .probe = max77620_probe, |
| .id_table = max77620_id, |
| }; |
| builtin_i2c_driver(max77620_driver); |