| /* | |
| * Copyright (C) 2015 Linaro Ltd. | |
| * Author: Shannon Zhao <shannon.zhao@linaro.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #include <linux/cpu.h> | |
| #include <linux/kvm.h> | |
| #include <linux/kvm_host.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/kvm_emulate.h> | |
| #include <kvm/arm_pmu.h> | |
| #include <kvm/arm_vgic.h> | |
| /** | |
| * kvm_pmu_get_counter_value - get PMU counter value | |
| * @vcpu: The vcpu pointer | |
| * @select_idx: The counter index | |
| */ | |
| u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx) | |
| { | |
| u64 counter, reg, enabled, running; | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| struct kvm_pmc *pmc = &pmu->pmc[select_idx]; | |
| reg = (select_idx == ARMV8_PMU_CYCLE_IDX) | |
| ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + select_idx; | |
| counter = __vcpu_sys_reg(vcpu, reg); | |
| /* The real counter value is equal to the value of counter register plus | |
| * the value perf event counts. | |
| */ | |
| if (pmc->perf_event) | |
| counter += perf_event_read_value(pmc->perf_event, &enabled, | |
| &running); | |
| return counter & pmc->bitmask; | |
| } | |
| /** | |
| * kvm_pmu_set_counter_value - set PMU counter value | |
| * @vcpu: The vcpu pointer | |
| * @select_idx: The counter index | |
| * @val: The counter value | |
| */ | |
| void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val) | |
| { | |
| u64 reg; | |
| reg = (select_idx == ARMV8_PMU_CYCLE_IDX) | |
| ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + select_idx; | |
| __vcpu_sys_reg(vcpu, reg) += (s64)val - kvm_pmu_get_counter_value(vcpu, select_idx); | |
| } | |
| /** | |
| * kvm_pmu_stop_counter - stop PMU counter | |
| * @pmc: The PMU counter pointer | |
| * | |
| * If this counter has been configured to monitor some event, release it here. | |
| */ | |
| static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc) | |
| { | |
| u64 counter, reg; | |
| if (pmc->perf_event) { | |
| counter = kvm_pmu_get_counter_value(vcpu, pmc->idx); | |
| reg = (pmc->idx == ARMV8_PMU_CYCLE_IDX) | |
| ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + pmc->idx; | |
| __vcpu_sys_reg(vcpu, reg) = counter; | |
| perf_event_disable(pmc->perf_event); | |
| perf_event_release_kernel(pmc->perf_event); | |
| pmc->perf_event = NULL; | |
| } | |
| } | |
| /** | |
| * kvm_pmu_vcpu_reset - reset pmu state for cpu | |
| * @vcpu: The vcpu pointer | |
| * | |
| */ | |
| void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu) | |
| { | |
| int i; | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) { | |
| kvm_pmu_stop_counter(vcpu, &pmu->pmc[i]); | |
| pmu->pmc[i].idx = i; | |
| pmu->pmc[i].bitmask = 0xffffffffUL; | |
| } | |
| } | |
| /** | |
| * kvm_pmu_vcpu_destroy - free perf event of PMU for cpu | |
| * @vcpu: The vcpu pointer | |
| * | |
| */ | |
| void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu) | |
| { | |
| int i; | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) { | |
| struct kvm_pmc *pmc = &pmu->pmc[i]; | |
| if (pmc->perf_event) { | |
| perf_event_disable(pmc->perf_event); | |
| perf_event_release_kernel(pmc->perf_event); | |
| pmc->perf_event = NULL; | |
| } | |
| } | |
| } | |
| u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu) | |
| { | |
| u64 val = __vcpu_sys_reg(vcpu, PMCR_EL0) >> ARMV8_PMU_PMCR_N_SHIFT; | |
| val &= ARMV8_PMU_PMCR_N_MASK; | |
| if (val == 0) | |
| return BIT(ARMV8_PMU_CYCLE_IDX); | |
| else | |
| return GENMASK(val - 1, 0) | BIT(ARMV8_PMU_CYCLE_IDX); | |
| } | |
| /** | |
| * kvm_pmu_enable_counter - enable selected PMU counter | |
| * @vcpu: The vcpu pointer | |
| * @val: the value guest writes to PMCNTENSET register | |
| * | |
| * Call perf_event_enable to start counting the perf event | |
| */ | |
| void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val) | |
| { | |
| int i; | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| struct kvm_pmc *pmc; | |
| if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val) | |
| return; | |
| for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) { | |
| if (!(val & BIT(i))) | |
| continue; | |
| pmc = &pmu->pmc[i]; | |
| if (pmc->perf_event) { | |
| perf_event_enable(pmc->perf_event); | |
| if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE) | |
| kvm_debug("fail to enable perf event\n"); | |
| } | |
| } | |
| } | |
| /** | |
| * kvm_pmu_disable_counter - disable selected PMU counter | |
| * @vcpu: The vcpu pointer | |
| * @val: the value guest writes to PMCNTENCLR register | |
| * | |
| * Call perf_event_disable to stop counting the perf event | |
| */ | |
| void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val) | |
| { | |
| int i; | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| struct kvm_pmc *pmc; | |
| if (!val) | |
| return; | |
| for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) { | |
| if (!(val & BIT(i))) | |
| continue; | |
| pmc = &pmu->pmc[i]; | |
| if (pmc->perf_event) | |
| perf_event_disable(pmc->perf_event); | |
| } | |
| } | |
| static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu) | |
| { | |
| u64 reg = 0; | |
| if ((__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) { | |
| reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0); | |
| reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0); | |
| reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1); | |
| reg &= kvm_pmu_valid_counter_mask(vcpu); | |
| } | |
| return reg; | |
| } | |
| static void kvm_pmu_update_state(struct kvm_vcpu *vcpu) | |
| { | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| bool overflow; | |
| if (!kvm_arm_pmu_v3_ready(vcpu)) | |
| return; | |
| overflow = !!kvm_pmu_overflow_status(vcpu); | |
| if (pmu->irq_level == overflow) | |
| return; | |
| pmu->irq_level = overflow; | |
| if (likely(irqchip_in_kernel(vcpu->kvm))) { | |
| int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id, | |
| pmu->irq_num, overflow, pmu); | |
| WARN_ON(ret); | |
| } | |
| } | |
| bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu) | |
| { | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| struct kvm_sync_regs *sregs = &vcpu->run->s.regs; | |
| bool run_level = sregs->device_irq_level & KVM_ARM_DEV_PMU; | |
| if (likely(irqchip_in_kernel(vcpu->kvm))) | |
| return false; | |
| return pmu->irq_level != run_level; | |
| } | |
| /* | |
| * Reflect the PMU overflow interrupt output level into the kvm_run structure | |
| */ | |
| void kvm_pmu_update_run(struct kvm_vcpu *vcpu) | |
| { | |
| struct kvm_sync_regs *regs = &vcpu->run->s.regs; | |
| /* Populate the timer bitmap for user space */ | |
| regs->device_irq_level &= ~KVM_ARM_DEV_PMU; | |
| if (vcpu->arch.pmu.irq_level) | |
| regs->device_irq_level |= KVM_ARM_DEV_PMU; | |
| } | |
| /** | |
| * kvm_pmu_flush_hwstate - flush pmu state to cpu | |
| * @vcpu: The vcpu pointer | |
| * | |
| * Check if the PMU has overflowed while we were running in the host, and inject | |
| * an interrupt if that was the case. | |
| */ | |
| void kvm_pmu_flush_hwstate(struct kvm_vcpu *vcpu) | |
| { | |
| kvm_pmu_update_state(vcpu); | |
| } | |
| /** | |
| * kvm_pmu_sync_hwstate - sync pmu state from cpu | |
| * @vcpu: The vcpu pointer | |
| * | |
| * Check if the PMU has overflowed while we were running in the guest, and | |
| * inject an interrupt if that was the case. | |
| */ | |
| void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu) | |
| { | |
| kvm_pmu_update_state(vcpu); | |
| } | |
| static inline struct kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc) | |
| { | |
| struct kvm_pmu *pmu; | |
| struct kvm_vcpu_arch *vcpu_arch; | |
| pmc -= pmc->idx; | |
| pmu = container_of(pmc, struct kvm_pmu, pmc[0]); | |
| vcpu_arch = container_of(pmu, struct kvm_vcpu_arch, pmu); | |
| return container_of(vcpu_arch, struct kvm_vcpu, arch); | |
| } | |
| /** | |
| * When the perf event overflows, set the overflow status and inform the vcpu. | |
| */ | |
| static void kvm_pmu_perf_overflow(struct perf_event *perf_event, | |
| struct perf_sample_data *data, | |
| struct pt_regs *regs) | |
| { | |
| struct kvm_pmc *pmc = perf_event->overflow_handler_context; | |
| struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc); | |
| int idx = pmc->idx; | |
| __vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(idx); | |
| if (kvm_pmu_overflow_status(vcpu)) { | |
| kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu); | |
| kvm_vcpu_kick(vcpu); | |
| } | |
| } | |
| /** | |
| * kvm_pmu_software_increment - do software increment | |
| * @vcpu: The vcpu pointer | |
| * @val: the value guest writes to PMSWINC register | |
| */ | |
| void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val) | |
| { | |
| int i; | |
| u64 type, enable, reg; | |
| if (val == 0) | |
| return; | |
| enable = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0); | |
| for (i = 0; i < ARMV8_PMU_CYCLE_IDX; i++) { | |
| if (!(val & BIT(i))) | |
| continue; | |
| type = __vcpu_sys_reg(vcpu, PMEVTYPER0_EL0 + i) | |
| & ARMV8_PMU_EVTYPE_EVENT; | |
| if ((type == ARMV8_PMUV3_PERFCTR_SW_INCR) | |
| && (enable & BIT(i))) { | |
| reg = __vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) + 1; | |
| reg = lower_32_bits(reg); | |
| __vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) = reg; | |
| if (!reg) | |
| __vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i); | |
| } | |
| } | |
| } | |
| /** | |
| * kvm_pmu_handle_pmcr - handle PMCR register | |
| * @vcpu: The vcpu pointer | |
| * @val: the value guest writes to PMCR register | |
| */ | |
| void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) | |
| { | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| struct kvm_pmc *pmc; | |
| u64 mask; | |
| int i; | |
| mask = kvm_pmu_valid_counter_mask(vcpu); | |
| if (val & ARMV8_PMU_PMCR_E) { | |
| kvm_pmu_enable_counter(vcpu, | |
| __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask); | |
| } else { | |
| kvm_pmu_disable_counter(vcpu, mask); | |
| } | |
| if (val & ARMV8_PMU_PMCR_C) | |
| kvm_pmu_set_counter_value(vcpu, ARMV8_PMU_CYCLE_IDX, 0); | |
| if (val & ARMV8_PMU_PMCR_P) { | |
| for (i = 0; i < ARMV8_PMU_CYCLE_IDX; i++) | |
| kvm_pmu_set_counter_value(vcpu, i, 0); | |
| } | |
| if (val & ARMV8_PMU_PMCR_LC) { | |
| pmc = &pmu->pmc[ARMV8_PMU_CYCLE_IDX]; | |
| pmc->bitmask = 0xffffffffffffffffUL; | |
| } | |
| } | |
| static bool kvm_pmu_counter_is_enabled(struct kvm_vcpu *vcpu, u64 select_idx) | |
| { | |
| return (__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) && | |
| (__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & BIT(select_idx)); | |
| } | |
| /** | |
| * kvm_pmu_set_counter_event_type - set selected counter to monitor some event | |
| * @vcpu: The vcpu pointer | |
| * @data: The data guest writes to PMXEVTYPER_EL0 | |
| * @select_idx: The number of selected counter | |
| * | |
| * When OS accesses PMXEVTYPER_EL0, that means it wants to set a PMC to count an | |
| * event with given hardware event number. Here we call perf_event API to | |
| * emulate this action and create a kernel perf event for it. | |
| */ | |
| void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data, | |
| u64 select_idx) | |
| { | |
| struct kvm_pmu *pmu = &vcpu->arch.pmu; | |
| struct kvm_pmc *pmc = &pmu->pmc[select_idx]; | |
| struct perf_event *event; | |
| struct perf_event_attr attr; | |
| u64 eventsel, counter; | |
| kvm_pmu_stop_counter(vcpu, pmc); | |
| eventsel = data & ARMV8_PMU_EVTYPE_EVENT; | |
| /* Software increment event does't need to be backed by a perf event */ | |
| if (eventsel == ARMV8_PMUV3_PERFCTR_SW_INCR && | |
| select_idx != ARMV8_PMU_CYCLE_IDX) | |
| return; | |
| memset(&attr, 0, sizeof(struct perf_event_attr)); | |
| attr.type = PERF_TYPE_RAW; | |
| attr.size = sizeof(attr); | |
| attr.pinned = 1; | |
| attr.disabled = !kvm_pmu_counter_is_enabled(vcpu, select_idx); | |
| attr.exclude_user = data & ARMV8_PMU_EXCLUDE_EL0 ? 1 : 0; | |
| attr.exclude_kernel = data & ARMV8_PMU_EXCLUDE_EL1 ? 1 : 0; | |
| attr.exclude_hv = 1; /* Don't count EL2 events */ | |
| attr.exclude_host = 1; /* Don't count host events */ | |
| attr.config = (select_idx == ARMV8_PMU_CYCLE_IDX) ? | |
| ARMV8_PMUV3_PERFCTR_CPU_CYCLES : eventsel; | |
| counter = kvm_pmu_get_counter_value(vcpu, select_idx); | |
| /* The initial sample period (overflow count) of an event. */ | |
| attr.sample_period = (-counter) & pmc->bitmask; | |
| event = perf_event_create_kernel_counter(&attr, -1, current, | |
| kvm_pmu_perf_overflow, pmc); | |
| if (IS_ERR(event)) { | |
| pr_err_once("kvm: pmu event creation failed %ld\n", | |
| PTR_ERR(event)); | |
| return; | |
| } | |
| pmc->perf_event = event; | |
| } | |
| bool kvm_arm_support_pmu_v3(void) | |
| { | |
| /* | |
| * Check if HW_PERF_EVENTS are supported by checking the number of | |
| * hardware performance counters. This could ensure the presence of | |
| * a physical PMU and CONFIG_PERF_EVENT is selected. | |
| */ | |
| return (perf_num_counters() > 0); | |
| } | |
| int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu) | |
| { | |
| if (!vcpu->arch.pmu.created) | |
| return 0; | |
| /* | |
| * A valid interrupt configuration for the PMU is either to have a | |
| * properly configured interrupt number and using an in-kernel | |
| * irqchip, or to not have an in-kernel GIC and not set an IRQ. | |
| */ | |
| if (irqchip_in_kernel(vcpu->kvm)) { | |
| int irq = vcpu->arch.pmu.irq_num; | |
| if (!kvm_arm_pmu_irq_initialized(vcpu)) | |
| return -EINVAL; | |
| /* | |
| * If we are using an in-kernel vgic, at this point we know | |
| * the vgic will be initialized, so we can check the PMU irq | |
| * number against the dimensions of the vgic and make sure | |
| * it's valid. | |
| */ | |
| if (!irq_is_ppi(irq) && !vgic_valid_spi(vcpu->kvm, irq)) | |
| return -EINVAL; | |
| } else if (kvm_arm_pmu_irq_initialized(vcpu)) { | |
| return -EINVAL; | |
| } | |
| kvm_pmu_vcpu_reset(vcpu); | |
| vcpu->arch.pmu.ready = true; | |
| return 0; | |
| } | |
| static int kvm_arm_pmu_v3_init(struct kvm_vcpu *vcpu) | |
| { | |
| if (!kvm_arm_support_pmu_v3()) | |
| return -ENODEV; | |
| if (!test_bit(KVM_ARM_VCPU_PMU_V3, vcpu->arch.features)) | |
| return -ENXIO; | |
| if (vcpu->arch.pmu.created) | |
| return -EBUSY; | |
| if (irqchip_in_kernel(vcpu->kvm)) { | |
| int ret; | |
| /* | |
| * If using the PMU with an in-kernel virtual GIC | |
| * implementation, we require the GIC to be already | |
| * initialized when initializing the PMU. | |
| */ | |
| if (!vgic_initialized(vcpu->kvm)) | |
| return -ENODEV; | |
| if (!kvm_arm_pmu_irq_initialized(vcpu)) | |
| return -ENXIO; | |
| ret = kvm_vgic_set_owner(vcpu, vcpu->arch.pmu.irq_num, | |
| &vcpu->arch.pmu); | |
| if (ret) | |
| return ret; | |
| } | |
| vcpu->arch.pmu.created = true; | |
| return 0; | |
| } | |
| /* | |
| * For one VM the interrupt type must be same for each vcpu. | |
| * As a PPI, the interrupt number is the same for all vcpus, | |
| * while as an SPI it must be a separate number per vcpu. | |
| */ | |
| static bool pmu_irq_is_valid(struct kvm *kvm, int irq) | |
| { | |
| int i; | |
| struct kvm_vcpu *vcpu; | |
| kvm_for_each_vcpu(i, vcpu, kvm) { | |
| if (!kvm_arm_pmu_irq_initialized(vcpu)) | |
| continue; | |
| if (irq_is_ppi(irq)) { | |
| if (vcpu->arch.pmu.irq_num != irq) | |
| return false; | |
| } else { | |
| if (vcpu->arch.pmu.irq_num == irq) | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) | |
| { | |
| switch (attr->attr) { | |
| case KVM_ARM_VCPU_PMU_V3_IRQ: { | |
| int __user *uaddr = (int __user *)(long)attr->addr; | |
| int irq; | |
| if (!irqchip_in_kernel(vcpu->kvm)) | |
| return -EINVAL; | |
| if (!test_bit(KVM_ARM_VCPU_PMU_V3, vcpu->arch.features)) | |
| return -ENODEV; | |
| if (get_user(irq, uaddr)) | |
| return -EFAULT; | |
| /* The PMU overflow interrupt can be a PPI or a valid SPI. */ | |
| if (!(irq_is_ppi(irq) || irq_is_spi(irq))) | |
| return -EINVAL; | |
| if (!pmu_irq_is_valid(vcpu->kvm, irq)) | |
| return -EINVAL; | |
| if (kvm_arm_pmu_irq_initialized(vcpu)) | |
| return -EBUSY; | |
| kvm_debug("Set kvm ARM PMU irq: %d\n", irq); | |
| vcpu->arch.pmu.irq_num = irq; | |
| return 0; | |
| } | |
| case KVM_ARM_VCPU_PMU_V3_INIT: | |
| return kvm_arm_pmu_v3_init(vcpu); | |
| } | |
| return -ENXIO; | |
| } | |
| int kvm_arm_pmu_v3_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) | |
| { | |
| switch (attr->attr) { | |
| case KVM_ARM_VCPU_PMU_V3_IRQ: { | |
| int __user *uaddr = (int __user *)(long)attr->addr; | |
| int irq; | |
| if (!irqchip_in_kernel(vcpu->kvm)) | |
| return -EINVAL; | |
| if (!test_bit(KVM_ARM_VCPU_PMU_V3, vcpu->arch.features)) | |
| return -ENODEV; | |
| if (!kvm_arm_pmu_irq_initialized(vcpu)) | |
| return -ENXIO; | |
| irq = vcpu->arch.pmu.irq_num; | |
| return put_user(irq, uaddr); | |
| } | |
| } | |
| return -ENXIO; | |
| } | |
| int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) | |
| { | |
| switch (attr->attr) { | |
| case KVM_ARM_VCPU_PMU_V3_IRQ: | |
| case KVM_ARM_VCPU_PMU_V3_INIT: | |
| if (kvm_arm_support_pmu_v3() && | |
| test_bit(KVM_ARM_VCPU_PMU_V3, vcpu->arch.features)) | |
| return 0; | |
| } | |
| return -ENXIO; | |
| } |