| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * core.c - DesignWare HS OTG Controller common routines |
| * |
| * Copyright (C) 2004-2013 Synopsys, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The names of the above-listed copyright holders may not be used |
| * to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation; either version 2 of the License, or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* |
| * The Core code provides basic services for accessing and managing the |
| * DWC_otg hardware. These services are used by both the Host Controller |
| * Driver and the Peripheral Controller Driver. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/ch11.h> |
| |
| #include "core.h" |
| #include "hcd.h" |
| |
| /** |
| * dwc2_backup_global_registers() - Backup global controller registers. |
| * When suspending usb bus, registers needs to be backuped |
| * if controller power is disabled once suspended. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| */ |
| int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_gregs_backup *gr; |
| |
| dev_dbg(hsotg->dev, "%s\n", __func__); |
| |
| /* Backup global regs */ |
| gr = &hsotg->gr_backup; |
| |
| gr->gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); |
| gr->gintmsk = dwc2_readl(hsotg->regs + GINTMSK); |
| gr->gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); |
| gr->gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); |
| gr->grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); |
| gr->gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); |
| gr->gdfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG); |
| gr->pcgcctl1 = dwc2_readl(hsotg->regs + PCGCCTL1); |
| gr->glpmcfg = dwc2_readl(hsotg->regs + GLPMCFG); |
| gr->gi2cctl = dwc2_readl(hsotg->regs + GI2CCTL); |
| gr->pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); |
| |
| gr->valid = true; |
| return 0; |
| } |
| |
| /** |
| * dwc2_restore_global_registers() - Restore controller global registers. |
| * When resuming usb bus, device registers needs to be restored |
| * if controller power were disabled. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| */ |
| int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg) |
| { |
| struct dwc2_gregs_backup *gr; |
| |
| dev_dbg(hsotg->dev, "%s\n", __func__); |
| |
| /* Restore global regs */ |
| gr = &hsotg->gr_backup; |
| if (!gr->valid) { |
| dev_err(hsotg->dev, "%s: no global registers to restore\n", |
| __func__); |
| return -EINVAL; |
| } |
| gr->valid = false; |
| |
| dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); |
| dwc2_writel(gr->gotgctl, hsotg->regs + GOTGCTL); |
| dwc2_writel(gr->gintmsk, hsotg->regs + GINTMSK); |
| dwc2_writel(gr->gusbcfg, hsotg->regs + GUSBCFG); |
| dwc2_writel(gr->gahbcfg, hsotg->regs + GAHBCFG); |
| dwc2_writel(gr->grxfsiz, hsotg->regs + GRXFSIZ); |
| dwc2_writel(gr->gnptxfsiz, hsotg->regs + GNPTXFSIZ); |
| dwc2_writel(gr->gdfifocfg, hsotg->regs + GDFIFOCFG); |
| dwc2_writel(gr->pcgcctl1, hsotg->regs + PCGCCTL1); |
| dwc2_writel(gr->glpmcfg, hsotg->regs + GLPMCFG); |
| dwc2_writel(gr->pcgcctl, hsotg->regs + PCGCTL); |
| dwc2_writel(gr->gi2cctl, hsotg->regs + GI2CCTL); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * @restore: Controller registers need to be restored |
| */ |
| int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, bool restore) |
| { |
| u32 pcgcctl; |
| int ret = 0; |
| |
| if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL) |
| return -ENOTSUPP; |
| |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); |
| pcgcctl &= ~PCGCTL_STOPPCLK; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); |
| pcgcctl &= ~PCGCTL_PWRCLMP; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); |
| pcgcctl &= ~PCGCTL_RSTPDWNMODULE; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| |
| udelay(100); |
| if (restore) { |
| ret = dwc2_restore_global_registers(hsotg); |
| if (ret) { |
| dev_err(hsotg->dev, "%s: failed to restore registers\n", |
| __func__); |
| return ret; |
| } |
| if (dwc2_is_host_mode(hsotg)) { |
| ret = dwc2_restore_host_registers(hsotg); |
| if (ret) { |
| dev_err(hsotg->dev, "%s: failed to restore host registers\n", |
| __func__); |
| return ret; |
| } |
| } else { |
| ret = dwc2_restore_device_registers(hsotg, 0); |
| if (ret) { |
| dev_err(hsotg->dev, "%s: failed to restore device registers\n", |
| __func__); |
| return ret; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * dwc2_enter_partial_power_down() - Put controller in Partial Power Down. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| */ |
| int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg) |
| { |
| u32 pcgcctl; |
| int ret = 0; |
| |
| if (!hsotg->params.power_down) |
| return -ENOTSUPP; |
| |
| /* Backup all registers */ |
| ret = dwc2_backup_global_registers(hsotg); |
| if (ret) { |
| dev_err(hsotg->dev, "%s: failed to backup global registers\n", |
| __func__); |
| return ret; |
| } |
| |
| if (dwc2_is_host_mode(hsotg)) { |
| ret = dwc2_backup_host_registers(hsotg); |
| if (ret) { |
| dev_err(hsotg->dev, "%s: failed to backup host registers\n", |
| __func__); |
| return ret; |
| } |
| } else { |
| ret = dwc2_backup_device_registers(hsotg); |
| if (ret) { |
| dev_err(hsotg->dev, "%s: failed to backup device registers\n", |
| __func__); |
| return ret; |
| } |
| } |
| |
| /* |
| * Clear any pending interrupts since dwc2 will not be able to |
| * clear them after entering partial_power_down. |
| */ |
| dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); |
| |
| /* Put the controller in low power state */ |
| pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); |
| |
| pcgcctl |= PCGCTL_PWRCLMP; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| ndelay(20); |
| |
| pcgcctl |= PCGCTL_RSTPDWNMODULE; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| ndelay(20); |
| |
| pcgcctl |= PCGCTL_STOPPCLK; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| |
| return ret; |
| } |
| |
| /** |
| * dwc2_restore_essential_regs() - Restore essiential regs of core. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * @rmode: Restore mode, enabled in case of remote-wakeup. |
| * @is_host: Host or device mode. |
| */ |
| static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode, |
| int is_host) |
| { |
| u32 pcgcctl; |
| struct dwc2_gregs_backup *gr; |
| struct dwc2_dregs_backup *dr; |
| struct dwc2_hregs_backup *hr; |
| |
| gr = &hsotg->gr_backup; |
| dr = &hsotg->dr_backup; |
| hr = &hsotg->hr_backup; |
| |
| dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__); |
| |
| /* Load restore values for [31:14] bits */ |
| pcgcctl = (gr->pcgcctl & 0xffffc000); |
| /* If High Speed */ |
| if (is_host) { |
| if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK)) |
| pcgcctl |= BIT(17); |
| } else { |
| if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK)) |
| pcgcctl |= BIT(17); |
| } |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| |
| /* Umnask global Interrupt in GAHBCFG and restore it */ |
| dwc2_writel(gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, hsotg->regs + GAHBCFG); |
| |
| /* Clear all pending interupts */ |
| dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); |
| |
| /* Unmask restore done interrupt */ |
| dwc2_writel(GINTSTS_RESTOREDONE, hsotg->regs + GINTMSK); |
| |
| /* Restore GUSBCFG and HCFG/DCFG */ |
| dwc2_writel(gr->gusbcfg, hsotg->regs + GUSBCFG); |
| |
| if (is_host) { |
| dwc2_writel(hr->hcfg, hsotg->regs + HCFG); |
| if (rmode) |
| pcgcctl |= PCGCTL_RESTOREMODE; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| udelay(10); |
| |
| pcgcctl |= PCGCTL_ESS_REG_RESTORED; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| udelay(10); |
| } else { |
| dwc2_writel(dr->dcfg, hsotg->regs + DCFG); |
| if (!rmode) |
| pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| udelay(10); |
| |
| pcgcctl |= PCGCTL_ESS_REG_RESTORED; |
| dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); |
| udelay(10); |
| } |
| } |
| |
| /** |
| * dwc2_hib_restore_common() - Common part of restore routine. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup. |
| * @is_host: Host or device mode. |
| */ |
| void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup, |
| int is_host) |
| { |
| u32 gpwrdn; |
| |
| /* Switch-on voltage to the core */ |
| gpwrdn = dwc2_readl(hsotg->regs + GPWRDN); |
| gpwrdn &= ~GPWRDN_PWRDNSWTCH; |
| dwc2_writel(gpwrdn, hsotg->regs + GPWRDN); |
| udelay(10); |
| |
| /* Reset core */ |
| gpwrdn = dwc2_readl(hsotg->regs + GPWRDN); |
| gpwrdn &= ~GPWRDN_PWRDNRSTN; |
| dwc2_writel(gpwrdn, hsotg->regs + GPWRDN); |
| udelay(10); |
| |
| /* Enable restore from PMU */ |
| gpwrdn = dwc2_readl(hsotg->regs + GPWRDN); |
| gpwrdn |= GPWRDN_RESTORE; |
| dwc2_writel(gpwrdn, hsotg->regs + GPWRDN); |
| udelay(10); |
| |
| /* Disable Power Down Clamp */ |
| gpwrdn = dwc2_readl(hsotg->regs + GPWRDN); |
| gpwrdn &= ~GPWRDN_PWRDNCLMP; |
| dwc2_writel(gpwrdn, hsotg->regs + GPWRDN); |
| udelay(50); |
| |
| if (!is_host && rem_wakeup) |
| udelay(70); |
| |
| /* Deassert reset core */ |
| gpwrdn = dwc2_readl(hsotg->regs + GPWRDN); |
| gpwrdn |= GPWRDN_PWRDNRSTN; |
| dwc2_writel(gpwrdn, hsotg->regs + GPWRDN); |
| udelay(10); |
| |
| /* Disable PMU interrupt */ |
| gpwrdn = dwc2_readl(hsotg->regs + GPWRDN); |
| gpwrdn &= ~GPWRDN_PMUINTSEL; |
| dwc2_writel(gpwrdn, hsotg->regs + GPWRDN); |
| udelay(10); |
| |
| /* Set Restore Essential Regs bit in PCGCCTL register */ |
| dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host); |
| |
| /* |
| * Wait For Restore_done Interrupt. This mechanism of polling the |
| * interrupt is introduced to avoid any possible race conditions |
| */ |
| if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE, |
| 20000)) { |
| dev_dbg(hsotg->dev, |
| "%s: Restore Done wan't generated here\n", |
| __func__); |
| } else { |
| dev_dbg(hsotg->dev, "restore done generated here\n"); |
| } |
| } |
| |
| /** |
| * dwc2_wait_for_mode() - Waits for the controller mode. |
| * @hsotg: Programming view of the DWC_otg controller. |
| * @host_mode: If true, waits for host mode, otherwise device mode. |
| */ |
| static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, |
| bool host_mode) |
| { |
| ktime_t start; |
| ktime_t end; |
| unsigned int timeout = 110; |
| |
| dev_vdbg(hsotg->dev, "Waiting for %s mode\n", |
| host_mode ? "host" : "device"); |
| |
| start = ktime_get(); |
| |
| while (1) { |
| s64 ms; |
| |
| if (dwc2_is_host_mode(hsotg) == host_mode) { |
| dev_vdbg(hsotg->dev, "%s mode set\n", |
| host_mode ? "Host" : "Device"); |
| break; |
| } |
| |
| end = ktime_get(); |
| ms = ktime_to_ms(ktime_sub(end, start)); |
| |
| if (ms >= (s64)timeout) { |
| dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n", |
| __func__, host_mode ? "host" : "device"); |
| break; |
| } |
| |
| usleep_range(1000, 2000); |
| } |
| } |
| |
| /** |
| * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce |
| * filter is enabled. |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| */ |
| static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) |
| { |
| u32 gsnpsid; |
| u32 ghwcfg4; |
| |
| if (!dwc2_hw_is_otg(hsotg)) |
| return false; |
| |
| /* Check if core configuration includes the IDDIG filter. */ |
| ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); |
| if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN)) |
| return false; |
| |
| /* |
| * Check if the IDDIG debounce filter is bypassed. Available |
| * in core version >= 3.10a. |
| */ |
| gsnpsid = dwc2_readl(hsotg->regs + GSNPSID); |
| if (gsnpsid >= DWC2_CORE_REV_3_10a) { |
| u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); |
| |
| if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * dwc2_enter_hibernation() - Common function to enter hibernation. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * @is_host: True if core is in host mode. |
| * |
| * Return: 0 if successful, negative error code otherwise |
| */ |
| int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host) |
| { |
| if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_HIBERNATION) |
| return -ENOTSUPP; |
| |
| if (is_host) |
| return dwc2_host_enter_hibernation(hsotg); |
| else |
| return dwc2_gadget_enter_hibernation(hsotg); |
| } |
| |
| /* |
| * dwc2_exit_hibernation() - Common function to exit from hibernation. |
| * |
| * @hsotg: Programming view of the DWC_otg controller |
| * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup. |
| * @reset: Enabled in case of restore with reset. |
| * @is_host: True if core is in host mode. |
| * |
| * Return: 0 if successful, negative error code otherwise |
| */ |
| int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, |
| int reset, int is_host) |
| { |
| if (is_host) |
| return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset); |
| else |
| return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset); |
| } |
| |
| /* |
| * Do core a soft reset of the core. Be careful with this because it |
| * resets all the internal state machines of the core. |
| */ |
| int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) |
| { |
| u32 greset; |
| bool wait_for_host_mode = false; |
| |
| dev_vdbg(hsotg->dev, "%s()\n", __func__); |
| |
| /* |
| * If the current mode is host, either due to the force mode |
| * bit being set (which persists after core reset) or the |
| * connector id pin, a core soft reset will temporarily reset |
| * the mode to device. A delay from the IDDIG debounce filter |
| * will occur before going back to host mode. |
| * |
| * Determine whether we will go back into host mode after a |
| * reset and account for this delay after the reset. |
| */ |
| if (dwc2_iddig_filter_enabled(hsotg)) { |
| u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); |
| u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); |
| |
| if (!(gotgctl & GOTGCTL_CONID_B) || |
| (gusbcfg & GUSBCFG_FORCEHOSTMODE)) { |
| wait_for_host_mode = true; |
| } |
| } |
| |
| /* Core Soft Reset */ |
| greset = dwc2_readl(hsotg->regs + GRSTCTL); |
| greset |= GRSTCTL_CSFTRST; |
| dwc2_writel(greset, hsotg->regs + GRSTCTL); |
| |
| if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_CSFTRST, 50)) { |
| dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST\n", |
| __func__); |
| return -EBUSY; |
| } |
| |
| /* Wait for AHB master IDLE state */ |
| if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 50)) { |
| dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n", |
| __func__); |
| return -EBUSY; |
| } |
| |
| if (wait_for_host_mode && !skip_wait) |
| dwc2_wait_for_mode(hsotg, true); |
| |
| return 0; |
| } |
| |
| /** |
| * dwc2_force_mode() - Force the mode of the controller. |
| * |
| * Forcing the mode is needed for two cases: |
| * |
| * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the |
| * controller to stay in a particular mode regardless of ID pin |
| * changes. We do this once during probe. |
| * |
| * 2) During probe we want to read reset values of the hw |
| * configuration registers that are only available in either host or |
| * device mode. We may need to force the mode if the current mode does |
| * not allow us to access the register in the mode that we want. |
| * |
| * In either case it only makes sense to force the mode if the |
| * controller hardware is OTG capable. |
| * |
| * Checks are done in this function to determine whether doing a force |
| * would be valid or not. |
| * |
| * If a force is done, it requires a IDDIG debounce filter delay if |
| * the filter is configured and enabled. We poll the current mode of |
| * the controller to account for this delay. |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| * @host: Host mode flag |
| */ |
| void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) |
| { |
| u32 gusbcfg; |
| u32 set; |
| u32 clear; |
| |
| dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device"); |
| |
| /* |
| * Force mode has no effect if the hardware is not OTG. |
| */ |
| if (!dwc2_hw_is_otg(hsotg)) |
| return; |
| |
| /* |
| * If dr_mode is either peripheral or host only, there is no |
| * need to ever force the mode to the opposite mode. |
| */ |
| if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) |
| return; |
| |
| if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST)) |
| return; |
| |
| gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); |
| |
| set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE; |
| clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE; |
| |
| gusbcfg &= ~clear; |
| gusbcfg |= set; |
| dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); |
| |
| dwc2_wait_for_mode(hsotg, host); |
| return; |
| } |
| |
| /** |
| * dwc2_clear_force_mode() - Clears the force mode bits. |
| * |
| * After clearing the bits, wait up to 100 ms to account for any |
| * potential IDDIG filter delay. We can't know if we expect this delay |
| * or not because the value of the connector ID status is affected by |
| * the force mode. We only need to call this once during probe if |
| * dr_mode == OTG. |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| */ |
| static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) |
| { |
| u32 gusbcfg; |
| |
| if (!dwc2_hw_is_otg(hsotg)) |
| return; |
| |
| dev_dbg(hsotg->dev, "Clearing force mode bits\n"); |
| |
| gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); |
| gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; |
| gusbcfg &= ~GUSBCFG_FORCEDEVMODE; |
| dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); |
| |
| if (dwc2_iddig_filter_enabled(hsotg)) |
| msleep(100); |
| } |
| |
| /* |
| * Sets or clears force mode based on the dr_mode parameter. |
| */ |
| void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) |
| { |
| switch (hsotg->dr_mode) { |
| case USB_DR_MODE_HOST: |
| /* |
| * NOTE: This is required for some rockchip soc based |
| * platforms on their host-only dwc2. |
| */ |
| if (!dwc2_hw_is_otg(hsotg)) |
| msleep(50); |
| |
| break; |
| case USB_DR_MODE_PERIPHERAL: |
| dwc2_force_mode(hsotg, false); |
| break; |
| case USB_DR_MODE_OTG: |
| dwc2_clear_force_mode(hsotg); |
| break; |
| default: |
| dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n", |
| __func__, hsotg->dr_mode); |
| break; |
| } |
| } |
| |
| /* |
| * dwc2_enable_acg - enable active clock gating feature |
| */ |
| void dwc2_enable_acg(struct dwc2_hsotg *hsotg) |
| { |
| if (hsotg->params.acg_enable) { |
| u32 pcgcctl1 = dwc2_readl(hsotg->regs + PCGCCTL1); |
| |
| dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n"); |
| pcgcctl1 |= PCGCCTL1_GATEEN; |
| dwc2_writel(pcgcctl1, hsotg->regs + PCGCCTL1); |
| } |
| } |
| |
| /** |
| * dwc2_dump_host_registers() - Prints the host registers |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| * |
| * NOTE: This function will be removed once the peripheral controller code |
| * is integrated and the driver is stable |
| */ |
| void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg) |
| { |
| #ifdef DEBUG |
| u32 __iomem *addr; |
| int i; |
| |
| dev_dbg(hsotg->dev, "Host Global Registers\n"); |
| addr = hsotg->regs + HCFG; |
| dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HFIR; |
| dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HFNUM; |
| dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HPTXSTS; |
| dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HAINT; |
| dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HAINTMSK; |
| dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| if (hsotg->params.dma_desc_enable) { |
| addr = hsotg->regs + HFLBADDR; |
| dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| } |
| |
| addr = hsotg->regs + HPRT0; |
| dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| |
| for (i = 0; i < hsotg->params.host_channels; i++) { |
| dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i); |
| addr = hsotg->regs + HCCHAR(i); |
| dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HCSPLT(i); |
| dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HCINT(i); |
| dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HCINTMSK(i); |
| dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HCTSIZ(i); |
| dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HCDMA(i); |
| dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| if (hsotg->params.dma_desc_enable) { |
| addr = hsotg->regs + HCDMAB(i); |
| dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| } |
| } |
| #endif |
| } |
| |
| /** |
| * dwc2_dump_global_registers() - Prints the core global registers |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| * |
| * NOTE: This function will be removed once the peripheral controller code |
| * is integrated and the driver is stable |
| */ |
| void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg) |
| { |
| #ifdef DEBUG |
| u32 __iomem *addr; |
| |
| dev_dbg(hsotg->dev, "Core Global Registers\n"); |
| addr = hsotg->regs + GOTGCTL; |
| dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GOTGINT; |
| dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GAHBCFG; |
| dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GUSBCFG; |
| dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GRSTCTL; |
| dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GINTSTS; |
| dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GINTMSK; |
| dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GRXSTSR; |
| dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GRXFSIZ; |
| dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GNPTXFSIZ; |
| dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GNPTXSTS; |
| dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GI2CCTL; |
| dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GPVNDCTL; |
| dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GGPIO; |
| dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GUID; |
| dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GSNPSID; |
| dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GHWCFG1; |
| dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GHWCFG2; |
| dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GHWCFG3; |
| dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GHWCFG4; |
| dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GLPMCFG; |
| dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GPWRDN; |
| dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + GDFIFOCFG; |
| dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| addr = hsotg->regs + HPTXFSIZ; |
| dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| |
| addr = hsotg->regs + PCGCTL; |
| dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n", |
| (unsigned long)addr, dwc2_readl(addr)); |
| #endif |
| } |
| |
| /** |
| * dwc2_flush_tx_fifo() - Flushes a Tx FIFO |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| * @num: Tx FIFO to flush |
| */ |
| void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num) |
| { |
| u32 greset; |
| |
| dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num); |
| |
| /* Wait for AHB master IDLE state */ |
| if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) |
| dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n", |
| __func__); |
| |
| greset = GRSTCTL_TXFFLSH; |
| greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK; |
| dwc2_writel(greset, hsotg->regs + GRSTCTL); |
| |
| if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000)) |
| dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n", |
| __func__); |
| |
| /* Wait for at least 3 PHY Clocks */ |
| udelay(1); |
| } |
| |
| /** |
| * dwc2_flush_rx_fifo() - Flushes the Rx FIFO |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| */ |
| void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg) |
| { |
| u32 greset; |
| |
| dev_vdbg(hsotg->dev, "%s()\n", __func__); |
| |
| /* Wait for AHB master IDLE state */ |
| if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) |
| dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n", |
| __func__); |
| |
| greset = GRSTCTL_RXFFLSH; |
| dwc2_writel(greset, hsotg->regs + GRSTCTL); |
| |
| /* Wait for RxFIFO flush done */ |
| if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000)) |
| dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n", |
| __func__); |
| |
| /* Wait for at least 3 PHY Clocks */ |
| udelay(1); |
| } |
| |
| bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) |
| { |
| if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff) |
| return false; |
| else |
| return true; |
| } |
| |
| /** |
| * dwc2_enable_global_interrupts() - Enables the controller's Global |
| * Interrupt in the AHB Config register |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| */ |
| void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg) |
| { |
| u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); |
| |
| ahbcfg |= GAHBCFG_GLBL_INTR_EN; |
| dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); |
| } |
| |
| /** |
| * dwc2_disable_global_interrupts() - Disables the controller's Global |
| * Interrupt in the AHB Config register |
| * |
| * @hsotg: Programming view of DWC_otg controller |
| */ |
| void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg) |
| { |
| u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); |
| |
| ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; |
| dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); |
| } |
| |
| /* Returns the controller's GHWCFG2.OTG_MODE. */ |
| unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg) |
| { |
| u32 ghwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2); |
| |
| return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >> |
| GHWCFG2_OP_MODE_SHIFT; |
| } |
| |
| /* Returns true if the controller is capable of DRD. */ |
| bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg) |
| { |
| unsigned int op_mode = dwc2_op_mode(hsotg); |
| |
| return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) || |
| (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) || |
| (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE); |
| } |
| |
| /* Returns true if the controller is host-only. */ |
| bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg) |
| { |
| unsigned int op_mode = dwc2_op_mode(hsotg); |
| |
| return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) || |
| (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST); |
| } |
| |
| /* Returns true if the controller is device-only. */ |
| bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg) |
| { |
| unsigned int op_mode = dwc2_op_mode(hsotg); |
| |
| return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || |
| (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE); |
| } |
| |
| /** |
| * dwc2_hsotg_wait_bit_set - Waits for bit to be set. |
| * @hsotg: Programming view of DWC_otg controller. |
| * @offset: Register's offset where bit/bits must be set. |
| * @mask: Mask of the bit/bits which must be set. |
| * @timeout: Timeout to wait. |
| * |
| * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout. |
| */ |
| int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask, |
| u32 timeout) |
| { |
| u32 i; |
| |
| for (i = 0; i < timeout; i++) { |
| if (dwc2_readl(hsotg->regs + offset) & mask) |
| return 0; |
| udelay(1); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| /** |
| * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear. |
| * @hsotg: Programming view of DWC_otg controller. |
| * @offset: Register's offset where bit/bits must be set. |
| * @mask: Mask of the bit/bits which must be set. |
| * @timeout: Timeout to wait. |
| * |
| * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout. |
| */ |
| int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask, |
| u32 timeout) |
| { |
| u32 i; |
| |
| for (i = 0; i < timeout; i++) { |
| if (!(dwc2_readl(hsotg->regs + offset) & mask)) |
| return 0; |
| udelay(1); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| MODULE_DESCRIPTION("DESIGNWARE HS OTG Core"); |
| MODULE_AUTHOR("Synopsys, Inc."); |
| MODULE_LICENSE("Dual BSD/GPL"); |