| /* | |
| * Copyright © 2006-2016 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER | |
| * DEALINGS IN THE SOFTWARE. | |
| */ | |
| #include "intel_drv.h" | |
| /** | |
| * DOC: Display PLLs | |
| * | |
| * Display PLLs used for driving outputs vary by platform. While some have | |
| * per-pipe or per-encoder dedicated PLLs, others allow the use of any PLL | |
| * from a pool. In the latter scenario, it is possible that multiple pipes | |
| * share a PLL if their configurations match. | |
| * | |
| * This file provides an abstraction over display PLLs. The function | |
| * intel_shared_dpll_init() initializes the PLLs for the given platform. The | |
| * users of a PLL are tracked and that tracking is integrated with the atomic | |
| * modest interface. During an atomic operation, a PLL can be requested for a | |
| * given CRTC and encoder configuration by calling intel_get_shared_dpll() and | |
| * a previously used PLL can be released with intel_release_shared_dpll(). | |
| * Changes to the users are first staged in the atomic state, and then made | |
| * effective by calling intel_shared_dpll_swap_state() during the atomic | |
| * commit phase. | |
| */ | |
| static void | |
| intel_atomic_duplicate_dpll_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll_state *shared_dpll) | |
| { | |
| enum intel_dpll_id i; | |
| /* Copy shared dpll state */ | |
| for (i = 0; i < dev_priv->num_shared_dpll; i++) { | |
| struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; | |
| shared_dpll[i] = pll->state; | |
| } | |
| } | |
| static struct intel_shared_dpll_state * | |
| intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s) | |
| { | |
| struct intel_atomic_state *state = to_intel_atomic_state(s); | |
| WARN_ON(!drm_modeset_is_locked(&s->dev->mode_config.connection_mutex)); | |
| if (!state->dpll_set) { | |
| state->dpll_set = true; | |
| intel_atomic_duplicate_dpll_state(to_i915(s->dev), | |
| state->shared_dpll); | |
| } | |
| return state->shared_dpll; | |
| } | |
| /** | |
| * intel_get_shared_dpll_by_id - get a DPLL given its id | |
| * @dev_priv: i915 device instance | |
| * @id: pll id | |
| * | |
| * Returns: | |
| * A pointer to the DPLL with @id | |
| */ | |
| struct intel_shared_dpll * | |
| intel_get_shared_dpll_by_id(struct drm_i915_private *dev_priv, | |
| enum intel_dpll_id id) | |
| { | |
| return &dev_priv->shared_dplls[id]; | |
| } | |
| /** | |
| * intel_get_shared_dpll_id - get the id of a DPLL | |
| * @dev_priv: i915 device instance | |
| * @pll: the DPLL | |
| * | |
| * Returns: | |
| * The id of @pll | |
| */ | |
| enum intel_dpll_id | |
| intel_get_shared_dpll_id(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| if (WARN_ON(pll < dev_priv->shared_dplls|| | |
| pll > &dev_priv->shared_dplls[dev_priv->num_shared_dpll])) | |
| return -1; | |
| return (enum intel_dpll_id) (pll - dev_priv->shared_dplls); | |
| } | |
| /* For ILK+ */ | |
| void assert_shared_dpll(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| bool state) | |
| { | |
| bool cur_state; | |
| struct intel_dpll_hw_state hw_state; | |
| if (WARN(!pll, "asserting DPLL %s with no DPLL\n", onoff(state))) | |
| return; | |
| cur_state = pll->info->funcs->get_hw_state(dev_priv, pll, &hw_state); | |
| I915_STATE_WARN(cur_state != state, | |
| "%s assertion failure (expected %s, current %s)\n", | |
| pll->info->name, onoff(state), onoff(cur_state)); | |
| } | |
| /** | |
| * intel_prepare_shared_dpll - call a dpll's prepare hook | |
| * @crtc: CRTC which has a shared dpll | |
| * | |
| * This calls the PLL's prepare hook if it has one and if the PLL is not | |
| * already enabled. The prepare hook is platform specific. | |
| */ | |
| void intel_prepare_shared_dpll(struct intel_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->base.dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| struct intel_shared_dpll *pll = crtc->config->shared_dpll; | |
| if (WARN_ON(pll == NULL)) | |
| return; | |
| mutex_lock(&dev_priv->dpll_lock); | |
| WARN_ON(!pll->state.crtc_mask); | |
| if (!pll->active_mask) { | |
| DRM_DEBUG_DRIVER("setting up %s\n", pll->info->name); | |
| WARN_ON(pll->on); | |
| assert_shared_dpll_disabled(dev_priv, pll); | |
| pll->info->funcs->prepare(dev_priv, pll); | |
| } | |
| mutex_unlock(&dev_priv->dpll_lock); | |
| } | |
| /** | |
| * intel_enable_shared_dpll - enable a CRTC's shared DPLL | |
| * @crtc: CRTC which has a shared DPLL | |
| * | |
| * Enable the shared DPLL used by @crtc. | |
| */ | |
| void intel_enable_shared_dpll(struct intel_crtc *crtc) | |
| { | |
| struct drm_device *dev = crtc->base.dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| struct intel_shared_dpll *pll = crtc->config->shared_dpll; | |
| unsigned crtc_mask = 1 << drm_crtc_index(&crtc->base); | |
| unsigned old_mask; | |
| if (WARN_ON(pll == NULL)) | |
| return; | |
| mutex_lock(&dev_priv->dpll_lock); | |
| old_mask = pll->active_mask; | |
| if (WARN_ON(!(pll->state.crtc_mask & crtc_mask)) || | |
| WARN_ON(pll->active_mask & crtc_mask)) | |
| goto out; | |
| pll->active_mask |= crtc_mask; | |
| DRM_DEBUG_KMS("enable %s (active %x, on? %d) for crtc %d\n", | |
| pll->info->name, pll->active_mask, pll->on, | |
| crtc->base.base.id); | |
| if (old_mask) { | |
| WARN_ON(!pll->on); | |
| assert_shared_dpll_enabled(dev_priv, pll); | |
| goto out; | |
| } | |
| WARN_ON(pll->on); | |
| DRM_DEBUG_KMS("enabling %s\n", pll->info->name); | |
| pll->info->funcs->enable(dev_priv, pll); | |
| pll->on = true; | |
| out: | |
| mutex_unlock(&dev_priv->dpll_lock); | |
| } | |
| /** | |
| * intel_disable_shared_dpll - disable a CRTC's shared DPLL | |
| * @crtc: CRTC which has a shared DPLL | |
| * | |
| * Disable the shared DPLL used by @crtc. | |
| */ | |
| void intel_disable_shared_dpll(struct intel_crtc *crtc) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
| struct intel_shared_dpll *pll = crtc->config->shared_dpll; | |
| unsigned crtc_mask = 1 << drm_crtc_index(&crtc->base); | |
| /* PCH only available on ILK+ */ | |
| if (INTEL_GEN(dev_priv) < 5) | |
| return; | |
| if (pll == NULL) | |
| return; | |
| mutex_lock(&dev_priv->dpll_lock); | |
| if (WARN_ON(!(pll->active_mask & crtc_mask))) | |
| goto out; | |
| DRM_DEBUG_KMS("disable %s (active %x, on? %d) for crtc %d\n", | |
| pll->info->name, pll->active_mask, pll->on, | |
| crtc->base.base.id); | |
| assert_shared_dpll_enabled(dev_priv, pll); | |
| WARN_ON(!pll->on); | |
| pll->active_mask &= ~crtc_mask; | |
| if (pll->active_mask) | |
| goto out; | |
| DRM_DEBUG_KMS("disabling %s\n", pll->info->name); | |
| pll->info->funcs->disable(dev_priv, pll); | |
| pll->on = false; | |
| out: | |
| mutex_unlock(&dev_priv->dpll_lock); | |
| } | |
| static struct intel_shared_dpll * | |
| intel_find_shared_dpll(struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state, | |
| enum intel_dpll_id range_min, | |
| enum intel_dpll_id range_max) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
| struct intel_shared_dpll *pll; | |
| struct intel_shared_dpll_state *shared_dpll; | |
| enum intel_dpll_id i; | |
| shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state); | |
| for (i = range_min; i <= range_max; i++) { | |
| pll = &dev_priv->shared_dplls[i]; | |
| /* Only want to check enabled timings first */ | |
| if (shared_dpll[i].crtc_mask == 0) | |
| continue; | |
| if (memcmp(&crtc_state->dpll_hw_state, | |
| &shared_dpll[i].hw_state, | |
| sizeof(crtc_state->dpll_hw_state)) == 0) { | |
| DRM_DEBUG_KMS("[CRTC:%d:%s] sharing existing %s (crtc mask 0x%08x, active %x)\n", | |
| crtc->base.base.id, crtc->base.name, | |
| pll->info->name, | |
| shared_dpll[i].crtc_mask, | |
| pll->active_mask); | |
| return pll; | |
| } | |
| } | |
| /* Ok no matching timings, maybe there's a free one? */ | |
| for (i = range_min; i <= range_max; i++) { | |
| pll = &dev_priv->shared_dplls[i]; | |
| if (shared_dpll[i].crtc_mask == 0) { | |
| DRM_DEBUG_KMS("[CRTC:%d:%s] allocated %s\n", | |
| crtc->base.base.id, crtc->base.name, | |
| pll->info->name); | |
| return pll; | |
| } | |
| } | |
| return NULL; | |
| } | |
| static void | |
| intel_reference_shared_dpll(struct intel_shared_dpll *pll, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_shared_dpll_state *shared_dpll; | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); | |
| const enum intel_dpll_id id = pll->info->id; | |
| shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state); | |
| if (shared_dpll[id].crtc_mask == 0) | |
| shared_dpll[id].hw_state = | |
| crtc_state->dpll_hw_state; | |
| crtc_state->shared_dpll = pll; | |
| DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->info->name, | |
| pipe_name(crtc->pipe)); | |
| shared_dpll[id].crtc_mask |= 1 << crtc->pipe; | |
| } | |
| /** | |
| * intel_shared_dpll_swap_state - make atomic DPLL configuration effective | |
| * @state: atomic state | |
| * | |
| * This is the dpll version of drm_atomic_helper_swap_state() since the | |
| * helper does not handle driver-specific global state. | |
| * | |
| * For consistency with atomic helpers this function does a complete swap, | |
| * i.e. it also puts the current state into @state, even though there is no | |
| * need for that at this moment. | |
| */ | |
| void intel_shared_dpll_swap_state(struct drm_atomic_state *state) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(state->dev); | |
| struct intel_shared_dpll_state *shared_dpll; | |
| struct intel_shared_dpll *pll; | |
| enum intel_dpll_id i; | |
| if (!to_intel_atomic_state(state)->dpll_set) | |
| return; | |
| shared_dpll = to_intel_atomic_state(state)->shared_dpll; | |
| for (i = 0; i < dev_priv->num_shared_dpll; i++) { | |
| struct intel_shared_dpll_state tmp; | |
| pll = &dev_priv->shared_dplls[i]; | |
| tmp = pll->state; | |
| pll->state = shared_dpll[i]; | |
| shared_dpll[i] = tmp; | |
| } | |
| } | |
| static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| val = I915_READ(PCH_DPLL(id)); | |
| hw_state->dpll = val; | |
| hw_state->fp0 = I915_READ(PCH_FP0(id)); | |
| hw_state->fp1 = I915_READ(PCH_FP1(id)); | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return val & DPLL_VCO_ENABLE; | |
| } | |
| static void ibx_pch_dpll_prepare(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| I915_WRITE(PCH_FP0(id), pll->state.hw_state.fp0); | |
| I915_WRITE(PCH_FP1(id), pll->state.hw_state.fp1); | |
| } | |
| static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) | |
| { | |
| u32 val; | |
| bool enabled; | |
| I915_STATE_WARN_ON(!(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))); | |
| val = I915_READ(PCH_DREF_CONTROL); | |
| enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | | |
| DREF_SUPERSPREAD_SOURCE_MASK)); | |
| I915_STATE_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n"); | |
| } | |
| static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| /* PCH refclock must be enabled first */ | |
| ibx_assert_pch_refclk_enabled(dev_priv); | |
| I915_WRITE(PCH_DPLL(id), pll->state.hw_state.dpll); | |
| /* Wait for the clocks to stabilize. */ | |
| POSTING_READ(PCH_DPLL(id)); | |
| udelay(150); | |
| /* The pixel multiplier can only be updated once the | |
| * DPLL is enabled and the clocks are stable. | |
| * | |
| * So write it again. | |
| */ | |
| I915_WRITE(PCH_DPLL(id), pll->state.hw_state.dpll); | |
| POSTING_READ(PCH_DPLL(id)); | |
| udelay(200); | |
| } | |
| static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| struct drm_device *dev = &dev_priv->drm; | |
| struct intel_crtc *crtc; | |
| /* Make sure no transcoder isn't still depending on us. */ | |
| for_each_intel_crtc(dev, crtc) { | |
| if (crtc->config->shared_dpll == pll) | |
| assert_pch_transcoder_disabled(dev_priv, crtc->pipe); | |
| } | |
| I915_WRITE(PCH_DPLL(id), 0); | |
| POSTING_READ(PCH_DPLL(id)); | |
| udelay(200); | |
| } | |
| static struct intel_shared_dpll * | |
| ibx_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
| struct intel_shared_dpll *pll; | |
| enum intel_dpll_id i; | |
| if (HAS_PCH_IBX(dev_priv)) { | |
| /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ | |
| i = (enum intel_dpll_id) crtc->pipe; | |
| pll = &dev_priv->shared_dplls[i]; | |
| DRM_DEBUG_KMS("[CRTC:%d:%s] using pre-allocated %s\n", | |
| crtc->base.base.id, crtc->base.name, | |
| pll->info->name); | |
| } else { | |
| pll = intel_find_shared_dpll(crtc, crtc_state, | |
| DPLL_ID_PCH_PLL_A, | |
| DPLL_ID_PCH_PLL_B); | |
| } | |
| if (!pll) | |
| return NULL; | |
| /* reference the pll */ | |
| intel_reference_shared_dpll(pll, crtc_state); | |
| return pll; | |
| } | |
| static void ibx_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, " | |
| "fp0: 0x%x, fp1: 0x%x\n", | |
| hw_state->dpll, | |
| hw_state->dpll_md, | |
| hw_state->fp0, | |
| hw_state->fp1); | |
| } | |
| static const struct intel_shared_dpll_funcs ibx_pch_dpll_funcs = { | |
| .prepare = ibx_pch_dpll_prepare, | |
| .enable = ibx_pch_dpll_enable, | |
| .disable = ibx_pch_dpll_disable, | |
| .get_hw_state = ibx_pch_dpll_get_hw_state, | |
| }; | |
| static void hsw_ddi_wrpll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| I915_WRITE(WRPLL_CTL(id), pll->state.hw_state.wrpll); | |
| POSTING_READ(WRPLL_CTL(id)); | |
| udelay(20); | |
| } | |
| static void hsw_ddi_spll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| I915_WRITE(SPLL_CTL, pll->state.hw_state.spll); | |
| POSTING_READ(SPLL_CTL); | |
| udelay(20); | |
| } | |
| static void hsw_ddi_wrpll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| val = I915_READ(WRPLL_CTL(id)); | |
| I915_WRITE(WRPLL_CTL(id), val & ~WRPLL_PLL_ENABLE); | |
| POSTING_READ(WRPLL_CTL(id)); | |
| } | |
| static void hsw_ddi_spll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| uint32_t val; | |
| val = I915_READ(SPLL_CTL); | |
| I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE); | |
| POSTING_READ(SPLL_CTL); | |
| } | |
| static bool hsw_ddi_wrpll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| val = I915_READ(WRPLL_CTL(id)); | |
| hw_state->wrpll = val; | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return val & WRPLL_PLL_ENABLE; | |
| } | |
| static bool hsw_ddi_spll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| uint32_t val; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| val = I915_READ(SPLL_CTL); | |
| hw_state->spll = val; | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return val & SPLL_PLL_ENABLE; | |
| } | |
| #define LC_FREQ 2700 | |
| #define LC_FREQ_2K U64_C(LC_FREQ * 2000) | |
| #define P_MIN 2 | |
| #define P_MAX 64 | |
| #define P_INC 2 | |
| /* Constraints for PLL good behavior */ | |
| #define REF_MIN 48 | |
| #define REF_MAX 400 | |
| #define VCO_MIN 2400 | |
| #define VCO_MAX 4800 | |
| struct hsw_wrpll_rnp { | |
| unsigned p, n2, r2; | |
| }; | |
| static unsigned hsw_wrpll_get_budget_for_freq(int clock) | |
| { | |
| unsigned budget; | |
| switch (clock) { | |
| case 25175000: | |
| case 25200000: | |
| case 27000000: | |
| case 27027000: | |
| case 37762500: | |
| case 37800000: | |
| case 40500000: | |
| case 40541000: | |
| case 54000000: | |
| case 54054000: | |
| case 59341000: | |
| case 59400000: | |
| case 72000000: | |
| case 74176000: | |
| case 74250000: | |
| case 81000000: | |
| case 81081000: | |
| case 89012000: | |
| case 89100000: | |
| case 108000000: | |
| case 108108000: | |
| case 111264000: | |
| case 111375000: | |
| case 148352000: | |
| case 148500000: | |
| case 162000000: | |
| case 162162000: | |
| case 222525000: | |
| case 222750000: | |
| case 296703000: | |
| case 297000000: | |
| budget = 0; | |
| break; | |
| case 233500000: | |
| case 245250000: | |
| case 247750000: | |
| case 253250000: | |
| case 298000000: | |
| budget = 1500; | |
| break; | |
| case 169128000: | |
| case 169500000: | |
| case 179500000: | |
| case 202000000: | |
| budget = 2000; | |
| break; | |
| case 256250000: | |
| case 262500000: | |
| case 270000000: | |
| case 272500000: | |
| case 273750000: | |
| case 280750000: | |
| case 281250000: | |
| case 286000000: | |
| case 291750000: | |
| budget = 4000; | |
| break; | |
| case 267250000: | |
| case 268500000: | |
| budget = 5000; | |
| break; | |
| default: | |
| budget = 1000; | |
| break; | |
| } | |
| return budget; | |
| } | |
| static void hsw_wrpll_update_rnp(uint64_t freq2k, unsigned budget, | |
| unsigned r2, unsigned n2, unsigned p, | |
| struct hsw_wrpll_rnp *best) | |
| { | |
| uint64_t a, b, c, d, diff, diff_best; | |
| /* No best (r,n,p) yet */ | |
| if (best->p == 0) { | |
| best->p = p; | |
| best->n2 = n2; | |
| best->r2 = r2; | |
| return; | |
| } | |
| /* | |
| * Output clock is (LC_FREQ_2K / 2000) * N / (P * R), which compares to | |
| * freq2k. | |
| * | |
| * delta = 1e6 * | |
| * abs(freq2k - (LC_FREQ_2K * n2/(p * r2))) / | |
| * freq2k; | |
| * | |
| * and we would like delta <= budget. | |
| * | |
| * If the discrepancy is above the PPM-based budget, always prefer to | |
| * improve upon the previous solution. However, if you're within the | |
| * budget, try to maximize Ref * VCO, that is N / (P * R^2). | |
| */ | |
| a = freq2k * budget * p * r2; | |
| b = freq2k * budget * best->p * best->r2; | |
| diff = abs_diff(freq2k * p * r2, LC_FREQ_2K * n2); | |
| diff_best = abs_diff(freq2k * best->p * best->r2, | |
| LC_FREQ_2K * best->n2); | |
| c = 1000000 * diff; | |
| d = 1000000 * diff_best; | |
| if (a < c && b < d) { | |
| /* If both are above the budget, pick the closer */ | |
| if (best->p * best->r2 * diff < p * r2 * diff_best) { | |
| best->p = p; | |
| best->n2 = n2; | |
| best->r2 = r2; | |
| } | |
| } else if (a >= c && b < d) { | |
| /* If A is below the threshold but B is above it? Update. */ | |
| best->p = p; | |
| best->n2 = n2; | |
| best->r2 = r2; | |
| } else if (a >= c && b >= d) { | |
| /* Both are below the limit, so pick the higher n2/(r2*r2) */ | |
| if (n2 * best->r2 * best->r2 > best->n2 * r2 * r2) { | |
| best->p = p; | |
| best->n2 = n2; | |
| best->r2 = r2; | |
| } | |
| } | |
| /* Otherwise a < c && b >= d, do nothing */ | |
| } | |
| static void | |
| hsw_ddi_calculate_wrpll(int clock /* in Hz */, | |
| unsigned *r2_out, unsigned *n2_out, unsigned *p_out) | |
| { | |
| uint64_t freq2k; | |
| unsigned p, n2, r2; | |
| struct hsw_wrpll_rnp best = { 0, 0, 0 }; | |
| unsigned budget; | |
| freq2k = clock / 100; | |
| budget = hsw_wrpll_get_budget_for_freq(clock); | |
| /* Special case handling for 540 pixel clock: bypass WR PLL entirely | |
| * and directly pass the LC PLL to it. */ | |
| if (freq2k == 5400000) { | |
| *n2_out = 2; | |
| *p_out = 1; | |
| *r2_out = 2; | |
| return; | |
| } | |
| /* | |
| * Ref = LC_FREQ / R, where Ref is the actual reference input seen by | |
| * the WR PLL. | |
| * | |
| * We want R so that REF_MIN <= Ref <= REF_MAX. | |
| * Injecting R2 = 2 * R gives: | |
| * REF_MAX * r2 > LC_FREQ * 2 and | |
| * REF_MIN * r2 < LC_FREQ * 2 | |
| * | |
| * Which means the desired boundaries for r2 are: | |
| * LC_FREQ * 2 / REF_MAX < r2 < LC_FREQ * 2 / REF_MIN | |
| * | |
| */ | |
| for (r2 = LC_FREQ * 2 / REF_MAX + 1; | |
| r2 <= LC_FREQ * 2 / REF_MIN; | |
| r2++) { | |
| /* | |
| * VCO = N * Ref, that is: VCO = N * LC_FREQ / R | |
| * | |
| * Once again we want VCO_MIN <= VCO <= VCO_MAX. | |
| * Injecting R2 = 2 * R and N2 = 2 * N, we get: | |
| * VCO_MAX * r2 > n2 * LC_FREQ and | |
| * VCO_MIN * r2 < n2 * LC_FREQ) | |
| * | |
| * Which means the desired boundaries for n2 are: | |
| * VCO_MIN * r2 / LC_FREQ < n2 < VCO_MAX * r2 / LC_FREQ | |
| */ | |
| for (n2 = VCO_MIN * r2 / LC_FREQ + 1; | |
| n2 <= VCO_MAX * r2 / LC_FREQ; | |
| n2++) { | |
| for (p = P_MIN; p <= P_MAX; p += P_INC) | |
| hsw_wrpll_update_rnp(freq2k, budget, | |
| r2, n2, p, &best); | |
| } | |
| } | |
| *n2_out = best.n2; | |
| *p_out = best.p; | |
| *r2_out = best.r2; | |
| } | |
| static struct intel_shared_dpll *hsw_ddi_hdmi_get_dpll(int clock, | |
| struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_shared_dpll *pll; | |
| uint32_t val; | |
| unsigned int p, n2, r2; | |
| hsw_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p); | |
| val = WRPLL_PLL_ENABLE | WRPLL_PLL_LCPLL | | |
| WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) | | |
| WRPLL_DIVIDER_POST(p); | |
| crtc_state->dpll_hw_state.wrpll = val; | |
| pll = intel_find_shared_dpll(crtc, crtc_state, | |
| DPLL_ID_WRPLL1, DPLL_ID_WRPLL2); | |
| if (!pll) | |
| return NULL; | |
| return pll; | |
| } | |
| static struct intel_shared_dpll * | |
| hsw_ddi_dp_get_dpll(struct intel_encoder *encoder, int clock) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); | |
| struct intel_shared_dpll *pll; | |
| enum intel_dpll_id pll_id; | |
| switch (clock / 2) { | |
| case 81000: | |
| pll_id = DPLL_ID_LCPLL_810; | |
| break; | |
| case 135000: | |
| pll_id = DPLL_ID_LCPLL_1350; | |
| break; | |
| case 270000: | |
| pll_id = DPLL_ID_LCPLL_2700; | |
| break; | |
| default: | |
| DRM_DEBUG_KMS("Invalid clock for DP: %d\n", clock); | |
| return NULL; | |
| } | |
| pll = intel_get_shared_dpll_by_id(dev_priv, pll_id); | |
| if (!pll) | |
| return NULL; | |
| return pll; | |
| } | |
| static struct intel_shared_dpll * | |
| hsw_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct intel_shared_dpll *pll; | |
| int clock = crtc_state->port_clock; | |
| memset(&crtc_state->dpll_hw_state, 0, | |
| sizeof(crtc_state->dpll_hw_state)); | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| pll = hsw_ddi_hdmi_get_dpll(clock, crtc, crtc_state); | |
| } else if (intel_crtc_has_dp_encoder(crtc_state)) { | |
| pll = hsw_ddi_dp_get_dpll(encoder, clock); | |
| } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) { | |
| if (WARN_ON(crtc_state->port_clock / 2 != 135000)) | |
| return NULL; | |
| crtc_state->dpll_hw_state.spll = | |
| SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC; | |
| pll = intel_find_shared_dpll(crtc, crtc_state, | |
| DPLL_ID_SPLL, DPLL_ID_SPLL); | |
| } else { | |
| return NULL; | |
| } | |
| if (!pll) | |
| return NULL; | |
| intel_reference_shared_dpll(pll, crtc_state); | |
| return pll; | |
| } | |
| static void hsw_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| DRM_DEBUG_KMS("dpll_hw_state: wrpll: 0x%x spll: 0x%x\n", | |
| hw_state->wrpll, hw_state->spll); | |
| } | |
| static const struct intel_shared_dpll_funcs hsw_ddi_wrpll_funcs = { | |
| .enable = hsw_ddi_wrpll_enable, | |
| .disable = hsw_ddi_wrpll_disable, | |
| .get_hw_state = hsw_ddi_wrpll_get_hw_state, | |
| }; | |
| static const struct intel_shared_dpll_funcs hsw_ddi_spll_funcs = { | |
| .enable = hsw_ddi_spll_enable, | |
| .disable = hsw_ddi_spll_disable, | |
| .get_hw_state = hsw_ddi_spll_get_hw_state, | |
| }; | |
| static void hsw_ddi_lcpll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| } | |
| static void hsw_ddi_lcpll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| } | |
| static bool hsw_ddi_lcpll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| return true; | |
| } | |
| static const struct intel_shared_dpll_funcs hsw_ddi_lcpll_funcs = { | |
| .enable = hsw_ddi_lcpll_enable, | |
| .disable = hsw_ddi_lcpll_disable, | |
| .get_hw_state = hsw_ddi_lcpll_get_hw_state, | |
| }; | |
| struct skl_dpll_regs { | |
| i915_reg_t ctl, cfgcr1, cfgcr2; | |
| }; | |
| /* this array is indexed by the *shared* pll id */ | |
| static const struct skl_dpll_regs skl_dpll_regs[4] = { | |
| { | |
| /* DPLL 0 */ | |
| .ctl = LCPLL1_CTL, | |
| /* DPLL 0 doesn't support HDMI mode */ | |
| }, | |
| { | |
| /* DPLL 1 */ | |
| .ctl = LCPLL2_CTL, | |
| .cfgcr1 = DPLL_CFGCR1(SKL_DPLL1), | |
| .cfgcr2 = DPLL_CFGCR2(SKL_DPLL1), | |
| }, | |
| { | |
| /* DPLL 2 */ | |
| .ctl = WRPLL_CTL(0), | |
| .cfgcr1 = DPLL_CFGCR1(SKL_DPLL2), | |
| .cfgcr2 = DPLL_CFGCR2(SKL_DPLL2), | |
| }, | |
| { | |
| /* DPLL 3 */ | |
| .ctl = WRPLL_CTL(1), | |
| .cfgcr1 = DPLL_CFGCR1(SKL_DPLL3), | |
| .cfgcr2 = DPLL_CFGCR2(SKL_DPLL3), | |
| }, | |
| }; | |
| static void skl_ddi_pll_write_ctrl1(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| val = I915_READ(DPLL_CTRL1); | |
| val &= ~(DPLL_CTRL1_HDMI_MODE(id) | | |
| DPLL_CTRL1_SSC(id) | | |
| DPLL_CTRL1_LINK_RATE_MASK(id)); | |
| val |= pll->state.hw_state.ctrl1 << (id * 6); | |
| I915_WRITE(DPLL_CTRL1, val); | |
| POSTING_READ(DPLL_CTRL1); | |
| } | |
| static void skl_ddi_pll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const struct skl_dpll_regs *regs = skl_dpll_regs; | |
| const enum intel_dpll_id id = pll->info->id; | |
| skl_ddi_pll_write_ctrl1(dev_priv, pll); | |
| I915_WRITE(regs[id].cfgcr1, pll->state.hw_state.cfgcr1); | |
| I915_WRITE(regs[id].cfgcr2, pll->state.hw_state.cfgcr2); | |
| POSTING_READ(regs[id].cfgcr1); | |
| POSTING_READ(regs[id].cfgcr2); | |
| /* the enable bit is always bit 31 */ | |
| I915_WRITE(regs[id].ctl, | |
| I915_READ(regs[id].ctl) | LCPLL_PLL_ENABLE); | |
| if (intel_wait_for_register(dev_priv, | |
| DPLL_STATUS, | |
| DPLL_LOCK(id), | |
| DPLL_LOCK(id), | |
| 5)) | |
| DRM_ERROR("DPLL %d not locked\n", id); | |
| } | |
| static void skl_ddi_dpll0_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| skl_ddi_pll_write_ctrl1(dev_priv, pll); | |
| } | |
| static void skl_ddi_pll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const struct skl_dpll_regs *regs = skl_dpll_regs; | |
| const enum intel_dpll_id id = pll->info->id; | |
| /* the enable bit is always bit 31 */ | |
| I915_WRITE(regs[id].ctl, | |
| I915_READ(regs[id].ctl) & ~LCPLL_PLL_ENABLE); | |
| POSTING_READ(regs[id].ctl); | |
| } | |
| static void skl_ddi_dpll0_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| } | |
| static bool skl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| uint32_t val; | |
| const struct skl_dpll_regs *regs = skl_dpll_regs; | |
| const enum intel_dpll_id id = pll->info->id; | |
| bool ret; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| ret = false; | |
| val = I915_READ(regs[id].ctl); | |
| if (!(val & LCPLL_PLL_ENABLE)) | |
| goto out; | |
| val = I915_READ(DPLL_CTRL1); | |
| hw_state->ctrl1 = (val >> (id * 6)) & 0x3f; | |
| /* avoid reading back stale values if HDMI mode is not enabled */ | |
| if (val & DPLL_CTRL1_HDMI_MODE(id)) { | |
| hw_state->cfgcr1 = I915_READ(regs[id].cfgcr1); | |
| hw_state->cfgcr2 = I915_READ(regs[id].cfgcr2); | |
| } | |
| ret = true; | |
| out: | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return ret; | |
| } | |
| static bool skl_ddi_dpll0_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| uint32_t val; | |
| const struct skl_dpll_regs *regs = skl_dpll_regs; | |
| const enum intel_dpll_id id = pll->info->id; | |
| bool ret; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| ret = false; | |
| /* DPLL0 is always enabled since it drives CDCLK */ | |
| val = I915_READ(regs[id].ctl); | |
| if (WARN_ON(!(val & LCPLL_PLL_ENABLE))) | |
| goto out; | |
| val = I915_READ(DPLL_CTRL1); | |
| hw_state->ctrl1 = (val >> (id * 6)) & 0x3f; | |
| ret = true; | |
| out: | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return ret; | |
| } | |
| struct skl_wrpll_context { | |
| uint64_t min_deviation; /* current minimal deviation */ | |
| uint64_t central_freq; /* chosen central freq */ | |
| uint64_t dco_freq; /* chosen dco freq */ | |
| unsigned int p; /* chosen divider */ | |
| }; | |
| static void skl_wrpll_context_init(struct skl_wrpll_context *ctx) | |
| { | |
| memset(ctx, 0, sizeof(*ctx)); | |
| ctx->min_deviation = U64_MAX; | |
| } | |
| /* DCO freq must be within +1%/-6% of the DCO central freq */ | |
| #define SKL_DCO_MAX_PDEVIATION 100 | |
| #define SKL_DCO_MAX_NDEVIATION 600 | |
| static void skl_wrpll_try_divider(struct skl_wrpll_context *ctx, | |
| uint64_t central_freq, | |
| uint64_t dco_freq, | |
| unsigned int divider) | |
| { | |
| uint64_t deviation; | |
| deviation = div64_u64(10000 * abs_diff(dco_freq, central_freq), | |
| central_freq); | |
| /* positive deviation */ | |
| if (dco_freq >= central_freq) { | |
| if (deviation < SKL_DCO_MAX_PDEVIATION && | |
| deviation < ctx->min_deviation) { | |
| ctx->min_deviation = deviation; | |
| ctx->central_freq = central_freq; | |
| ctx->dco_freq = dco_freq; | |
| ctx->p = divider; | |
| } | |
| /* negative deviation */ | |
| } else if (deviation < SKL_DCO_MAX_NDEVIATION && | |
| deviation < ctx->min_deviation) { | |
| ctx->min_deviation = deviation; | |
| ctx->central_freq = central_freq; | |
| ctx->dco_freq = dco_freq; | |
| ctx->p = divider; | |
| } | |
| } | |
| static void skl_wrpll_get_multipliers(unsigned int p, | |
| unsigned int *p0 /* out */, | |
| unsigned int *p1 /* out */, | |
| unsigned int *p2 /* out */) | |
| { | |
| /* even dividers */ | |
| if (p % 2 == 0) { | |
| unsigned int half = p / 2; | |
| if (half == 1 || half == 2 || half == 3 || half == 5) { | |
| *p0 = 2; | |
| *p1 = 1; | |
| *p2 = half; | |
| } else if (half % 2 == 0) { | |
| *p0 = 2; | |
| *p1 = half / 2; | |
| *p2 = 2; | |
| } else if (half % 3 == 0) { | |
| *p0 = 3; | |
| *p1 = half / 3; | |
| *p2 = 2; | |
| } else if (half % 7 == 0) { | |
| *p0 = 7; | |
| *p1 = half / 7; | |
| *p2 = 2; | |
| } | |
| } else if (p == 3 || p == 9) { /* 3, 5, 7, 9, 15, 21, 35 */ | |
| *p0 = 3; | |
| *p1 = 1; | |
| *p2 = p / 3; | |
| } else if (p == 5 || p == 7) { | |
| *p0 = p; | |
| *p1 = 1; | |
| *p2 = 1; | |
| } else if (p == 15) { | |
| *p0 = 3; | |
| *p1 = 1; | |
| *p2 = 5; | |
| } else if (p == 21) { | |
| *p0 = 7; | |
| *p1 = 1; | |
| *p2 = 3; | |
| } else if (p == 35) { | |
| *p0 = 7; | |
| *p1 = 1; | |
| *p2 = 5; | |
| } | |
| } | |
| struct skl_wrpll_params { | |
| uint32_t dco_fraction; | |
| uint32_t dco_integer; | |
| uint32_t qdiv_ratio; | |
| uint32_t qdiv_mode; | |
| uint32_t kdiv; | |
| uint32_t pdiv; | |
| uint32_t central_freq; | |
| }; | |
| static void skl_wrpll_params_populate(struct skl_wrpll_params *params, | |
| uint64_t afe_clock, | |
| uint64_t central_freq, | |
| uint32_t p0, uint32_t p1, uint32_t p2) | |
| { | |
| uint64_t dco_freq; | |
| switch (central_freq) { | |
| case 9600000000ULL: | |
| params->central_freq = 0; | |
| break; | |
| case 9000000000ULL: | |
| params->central_freq = 1; | |
| break; | |
| case 8400000000ULL: | |
| params->central_freq = 3; | |
| } | |
| switch (p0) { | |
| case 1: | |
| params->pdiv = 0; | |
| break; | |
| case 2: | |
| params->pdiv = 1; | |
| break; | |
| case 3: | |
| params->pdiv = 2; | |
| break; | |
| case 7: | |
| params->pdiv = 4; | |
| break; | |
| default: | |
| WARN(1, "Incorrect PDiv\n"); | |
| } | |
| switch (p2) { | |
| case 5: | |
| params->kdiv = 0; | |
| break; | |
| case 2: | |
| params->kdiv = 1; | |
| break; | |
| case 3: | |
| params->kdiv = 2; | |
| break; | |
| case 1: | |
| params->kdiv = 3; | |
| break; | |
| default: | |
| WARN(1, "Incorrect KDiv\n"); | |
| } | |
| params->qdiv_ratio = p1; | |
| params->qdiv_mode = (params->qdiv_ratio == 1) ? 0 : 1; | |
| dco_freq = p0 * p1 * p2 * afe_clock; | |
| /* | |
| * Intermediate values are in Hz. | |
| * Divide by MHz to match bsepc | |
| */ | |
| params->dco_integer = div_u64(dco_freq, 24 * MHz(1)); | |
| params->dco_fraction = | |
| div_u64((div_u64(dco_freq, 24) - | |
| params->dco_integer * MHz(1)) * 0x8000, MHz(1)); | |
| } | |
| static bool | |
| skl_ddi_calculate_wrpll(int clock /* in Hz */, | |
| struct skl_wrpll_params *wrpll_params) | |
| { | |
| uint64_t afe_clock = clock * 5; /* AFE Clock is 5x Pixel clock */ | |
| uint64_t dco_central_freq[3] = {8400000000ULL, | |
| 9000000000ULL, | |
| 9600000000ULL}; | |
| static const int even_dividers[] = { 4, 6, 8, 10, 12, 14, 16, 18, 20, | |
| 24, 28, 30, 32, 36, 40, 42, 44, | |
| 48, 52, 54, 56, 60, 64, 66, 68, | |
| 70, 72, 76, 78, 80, 84, 88, 90, | |
| 92, 96, 98 }; | |
| static const int odd_dividers[] = { 3, 5, 7, 9, 15, 21, 35 }; | |
| static const struct { | |
| const int *list; | |
| int n_dividers; | |
| } dividers[] = { | |
| { even_dividers, ARRAY_SIZE(even_dividers) }, | |
| { odd_dividers, ARRAY_SIZE(odd_dividers) }, | |
| }; | |
| struct skl_wrpll_context ctx; | |
| unsigned int dco, d, i; | |
| unsigned int p0, p1, p2; | |
| skl_wrpll_context_init(&ctx); | |
| for (d = 0; d < ARRAY_SIZE(dividers); d++) { | |
| for (dco = 0; dco < ARRAY_SIZE(dco_central_freq); dco++) { | |
| for (i = 0; i < dividers[d].n_dividers; i++) { | |
| unsigned int p = dividers[d].list[i]; | |
| uint64_t dco_freq = p * afe_clock; | |
| skl_wrpll_try_divider(&ctx, | |
| dco_central_freq[dco], | |
| dco_freq, | |
| p); | |
| /* | |
| * Skip the remaining dividers if we're sure to | |
| * have found the definitive divider, we can't | |
| * improve a 0 deviation. | |
| */ | |
| if (ctx.min_deviation == 0) | |
| goto skip_remaining_dividers; | |
| } | |
| } | |
| skip_remaining_dividers: | |
| /* | |
| * If a solution is found with an even divider, prefer | |
| * this one. | |
| */ | |
| if (d == 0 && ctx.p) | |
| break; | |
| } | |
| if (!ctx.p) { | |
| DRM_DEBUG_DRIVER("No valid divider found for %dHz\n", clock); | |
| return false; | |
| } | |
| /* | |
| * gcc incorrectly analyses that these can be used without being | |
| * initialized. To be fair, it's hard to guess. | |
| */ | |
| p0 = p1 = p2 = 0; | |
| skl_wrpll_get_multipliers(ctx.p, &p0, &p1, &p2); | |
| skl_wrpll_params_populate(wrpll_params, afe_clock, ctx.central_freq, | |
| p0, p1, p2); | |
| return true; | |
| } | |
| static bool skl_ddi_hdmi_pll_dividers(struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state, | |
| int clock) | |
| { | |
| uint32_t ctrl1, cfgcr1, cfgcr2; | |
| struct skl_wrpll_params wrpll_params = { 0, }; | |
| /* | |
| * See comment in intel_dpll_hw_state to understand why we always use 0 | |
| * as the DPLL id in this function. | |
| */ | |
| ctrl1 = DPLL_CTRL1_OVERRIDE(0); | |
| ctrl1 |= DPLL_CTRL1_HDMI_MODE(0); | |
| if (!skl_ddi_calculate_wrpll(clock * 1000, &wrpll_params)) | |
| return false; | |
| cfgcr1 = DPLL_CFGCR1_FREQ_ENABLE | | |
| DPLL_CFGCR1_DCO_FRACTION(wrpll_params.dco_fraction) | | |
| wrpll_params.dco_integer; | |
| cfgcr2 = DPLL_CFGCR2_QDIV_RATIO(wrpll_params.qdiv_ratio) | | |
| DPLL_CFGCR2_QDIV_MODE(wrpll_params.qdiv_mode) | | |
| DPLL_CFGCR2_KDIV(wrpll_params.kdiv) | | |
| DPLL_CFGCR2_PDIV(wrpll_params.pdiv) | | |
| wrpll_params.central_freq; | |
| memset(&crtc_state->dpll_hw_state, 0, | |
| sizeof(crtc_state->dpll_hw_state)); | |
| crtc_state->dpll_hw_state.ctrl1 = ctrl1; | |
| crtc_state->dpll_hw_state.cfgcr1 = cfgcr1; | |
| crtc_state->dpll_hw_state.cfgcr2 = cfgcr2; | |
| return true; | |
| } | |
| static bool | |
| skl_ddi_dp_set_dpll_hw_state(int clock, | |
| struct intel_dpll_hw_state *dpll_hw_state) | |
| { | |
| uint32_t ctrl1; | |
| /* | |
| * See comment in intel_dpll_hw_state to understand why we always use 0 | |
| * as the DPLL id in this function. | |
| */ | |
| ctrl1 = DPLL_CTRL1_OVERRIDE(0); | |
| switch (clock / 2) { | |
| case 81000: | |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0); | |
| break; | |
| case 135000: | |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0); | |
| break; | |
| case 270000: | |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0); | |
| break; | |
| /* eDP 1.4 rates */ | |
| case 162000: | |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, 0); | |
| break; | |
| case 108000: | |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, 0); | |
| break; | |
| case 216000: | |
| ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, 0); | |
| break; | |
| } | |
| dpll_hw_state->ctrl1 = ctrl1; | |
| return true; | |
| } | |
| static struct intel_shared_dpll * | |
| skl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct intel_shared_dpll *pll; | |
| int clock = crtc_state->port_clock; | |
| bool bret; | |
| struct intel_dpll_hw_state dpll_hw_state; | |
| memset(&dpll_hw_state, 0, sizeof(dpll_hw_state)); | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| bret = skl_ddi_hdmi_pll_dividers(crtc, crtc_state, clock); | |
| if (!bret) { | |
| DRM_DEBUG_KMS("Could not get HDMI pll dividers.\n"); | |
| return NULL; | |
| } | |
| } else if (intel_crtc_has_dp_encoder(crtc_state)) { | |
| bret = skl_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state); | |
| if (!bret) { | |
| DRM_DEBUG_KMS("Could not set DP dpll HW state.\n"); | |
| return NULL; | |
| } | |
| crtc_state->dpll_hw_state = dpll_hw_state; | |
| } else { | |
| return NULL; | |
| } | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) | |
| pll = intel_find_shared_dpll(crtc, crtc_state, | |
| DPLL_ID_SKL_DPLL0, | |
| DPLL_ID_SKL_DPLL0); | |
| else | |
| pll = intel_find_shared_dpll(crtc, crtc_state, | |
| DPLL_ID_SKL_DPLL1, | |
| DPLL_ID_SKL_DPLL3); | |
| if (!pll) | |
| return NULL; | |
| intel_reference_shared_dpll(pll, crtc_state); | |
| return pll; | |
| } | |
| static void skl_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| DRM_DEBUG_KMS("dpll_hw_state: " | |
| "ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n", | |
| hw_state->ctrl1, | |
| hw_state->cfgcr1, | |
| hw_state->cfgcr2); | |
| } | |
| static const struct intel_shared_dpll_funcs skl_ddi_pll_funcs = { | |
| .enable = skl_ddi_pll_enable, | |
| .disable = skl_ddi_pll_disable, | |
| .get_hw_state = skl_ddi_pll_get_hw_state, | |
| }; | |
| static const struct intel_shared_dpll_funcs skl_ddi_dpll0_funcs = { | |
| .enable = skl_ddi_dpll0_enable, | |
| .disable = skl_ddi_dpll0_disable, | |
| .get_hw_state = skl_ddi_dpll0_get_hw_state, | |
| }; | |
| static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| uint32_t temp; | |
| enum port port = (enum port)pll->info->id; /* 1:1 port->PLL mapping */ | |
| enum dpio_phy phy; | |
| enum dpio_channel ch; | |
| bxt_port_to_phy_channel(dev_priv, port, &phy, &ch); | |
| /* Non-SSC reference */ | |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); | |
| temp |= PORT_PLL_REF_SEL; | |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); | |
| if (IS_GEMINILAKE(dev_priv)) { | |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); | |
| temp |= PORT_PLL_POWER_ENABLE; | |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); | |
| if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & | |
| PORT_PLL_POWER_STATE), 200)) | |
| DRM_ERROR("Power state not set for PLL:%d\n", port); | |
| } | |
| /* Disable 10 bit clock */ | |
| temp = I915_READ(BXT_PORT_PLL_EBB_4(phy, ch)); | |
| temp &= ~PORT_PLL_10BIT_CLK_ENABLE; | |
| I915_WRITE(BXT_PORT_PLL_EBB_4(phy, ch), temp); | |
| /* Write P1 & P2 */ | |
| temp = I915_READ(BXT_PORT_PLL_EBB_0(phy, ch)); | |
| temp &= ~(PORT_PLL_P1_MASK | PORT_PLL_P2_MASK); | |
| temp |= pll->state.hw_state.ebb0; | |
| I915_WRITE(BXT_PORT_PLL_EBB_0(phy, ch), temp); | |
| /* Write M2 integer */ | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 0)); | |
| temp &= ~PORT_PLL_M2_MASK; | |
| temp |= pll->state.hw_state.pll0; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 0), temp); | |
| /* Write N */ | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 1)); | |
| temp &= ~PORT_PLL_N_MASK; | |
| temp |= pll->state.hw_state.pll1; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 1), temp); | |
| /* Write M2 fraction */ | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 2)); | |
| temp &= ~PORT_PLL_M2_FRAC_MASK; | |
| temp |= pll->state.hw_state.pll2; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 2), temp); | |
| /* Write M2 fraction enable */ | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 3)); | |
| temp &= ~PORT_PLL_M2_FRAC_ENABLE; | |
| temp |= pll->state.hw_state.pll3; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 3), temp); | |
| /* Write coeff */ | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 6)); | |
| temp &= ~PORT_PLL_PROP_COEFF_MASK; | |
| temp &= ~PORT_PLL_INT_COEFF_MASK; | |
| temp &= ~PORT_PLL_GAIN_CTL_MASK; | |
| temp |= pll->state.hw_state.pll6; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 6), temp); | |
| /* Write calibration val */ | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 8)); | |
| temp &= ~PORT_PLL_TARGET_CNT_MASK; | |
| temp |= pll->state.hw_state.pll8; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 8), temp); | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 9)); | |
| temp &= ~PORT_PLL_LOCK_THRESHOLD_MASK; | |
| temp |= pll->state.hw_state.pll9; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 9), temp); | |
| temp = I915_READ(BXT_PORT_PLL(phy, ch, 10)); | |
| temp &= ~PORT_PLL_DCO_AMP_OVR_EN_H; | |
| temp &= ~PORT_PLL_DCO_AMP_MASK; | |
| temp |= pll->state.hw_state.pll10; | |
| I915_WRITE(BXT_PORT_PLL(phy, ch, 10), temp); | |
| /* Recalibrate with new settings */ | |
| temp = I915_READ(BXT_PORT_PLL_EBB_4(phy, ch)); | |
| temp |= PORT_PLL_RECALIBRATE; | |
| I915_WRITE(BXT_PORT_PLL_EBB_4(phy, ch), temp); | |
| temp &= ~PORT_PLL_10BIT_CLK_ENABLE; | |
| temp |= pll->state.hw_state.ebb4; | |
| I915_WRITE(BXT_PORT_PLL_EBB_4(phy, ch), temp); | |
| /* Enable PLL */ | |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); | |
| temp |= PORT_PLL_ENABLE; | |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); | |
| POSTING_READ(BXT_PORT_PLL_ENABLE(port)); | |
| if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK), | |
| 200)) | |
| DRM_ERROR("PLL %d not locked\n", port); | |
| if (IS_GEMINILAKE(dev_priv)) { | |
| temp = I915_READ(BXT_PORT_TX_DW5_LN0(phy, ch)); | |
| temp |= DCC_DELAY_RANGE_2; | |
| I915_WRITE(BXT_PORT_TX_DW5_GRP(phy, ch), temp); | |
| } | |
| /* | |
| * While we write to the group register to program all lanes at once we | |
| * can read only lane registers and we pick lanes 0/1 for that. | |
| */ | |
| temp = I915_READ(BXT_PORT_PCS_DW12_LN01(phy, ch)); | |
| temp &= ~LANE_STAGGER_MASK; | |
| temp &= ~LANESTAGGER_STRAP_OVRD; | |
| temp |= pll->state.hw_state.pcsdw12; | |
| I915_WRITE(BXT_PORT_PCS_DW12_GRP(phy, ch), temp); | |
| } | |
| static void bxt_ddi_pll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| enum port port = (enum port)pll->info->id; /* 1:1 port->PLL mapping */ | |
| uint32_t temp; | |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); | |
| temp &= ~PORT_PLL_ENABLE; | |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); | |
| POSTING_READ(BXT_PORT_PLL_ENABLE(port)); | |
| if (IS_GEMINILAKE(dev_priv)) { | |
| temp = I915_READ(BXT_PORT_PLL_ENABLE(port)); | |
| temp &= ~PORT_PLL_POWER_ENABLE; | |
| I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); | |
| if (wait_for_us(!(I915_READ(BXT_PORT_PLL_ENABLE(port)) & | |
| PORT_PLL_POWER_STATE), 200)) | |
| DRM_ERROR("Power state not reset for PLL:%d\n", port); | |
| } | |
| } | |
| static bool bxt_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| enum port port = (enum port)pll->info->id; /* 1:1 port->PLL mapping */ | |
| uint32_t val; | |
| bool ret; | |
| enum dpio_phy phy; | |
| enum dpio_channel ch; | |
| bxt_port_to_phy_channel(dev_priv, port, &phy, &ch); | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| ret = false; | |
| val = I915_READ(BXT_PORT_PLL_ENABLE(port)); | |
| if (!(val & PORT_PLL_ENABLE)) | |
| goto out; | |
| hw_state->ebb0 = I915_READ(BXT_PORT_PLL_EBB_0(phy, ch)); | |
| hw_state->ebb0 &= PORT_PLL_P1_MASK | PORT_PLL_P2_MASK; | |
| hw_state->ebb4 = I915_READ(BXT_PORT_PLL_EBB_4(phy, ch)); | |
| hw_state->ebb4 &= PORT_PLL_10BIT_CLK_ENABLE; | |
| hw_state->pll0 = I915_READ(BXT_PORT_PLL(phy, ch, 0)); | |
| hw_state->pll0 &= PORT_PLL_M2_MASK; | |
| hw_state->pll1 = I915_READ(BXT_PORT_PLL(phy, ch, 1)); | |
| hw_state->pll1 &= PORT_PLL_N_MASK; | |
| hw_state->pll2 = I915_READ(BXT_PORT_PLL(phy, ch, 2)); | |
| hw_state->pll2 &= PORT_PLL_M2_FRAC_MASK; | |
| hw_state->pll3 = I915_READ(BXT_PORT_PLL(phy, ch, 3)); | |
| hw_state->pll3 &= PORT_PLL_M2_FRAC_ENABLE; | |
| hw_state->pll6 = I915_READ(BXT_PORT_PLL(phy, ch, 6)); | |
| hw_state->pll6 &= PORT_PLL_PROP_COEFF_MASK | | |
| PORT_PLL_INT_COEFF_MASK | | |
| PORT_PLL_GAIN_CTL_MASK; | |
| hw_state->pll8 = I915_READ(BXT_PORT_PLL(phy, ch, 8)); | |
| hw_state->pll8 &= PORT_PLL_TARGET_CNT_MASK; | |
| hw_state->pll9 = I915_READ(BXT_PORT_PLL(phy, ch, 9)); | |
| hw_state->pll9 &= PORT_PLL_LOCK_THRESHOLD_MASK; | |
| hw_state->pll10 = I915_READ(BXT_PORT_PLL(phy, ch, 10)); | |
| hw_state->pll10 &= PORT_PLL_DCO_AMP_OVR_EN_H | | |
| PORT_PLL_DCO_AMP_MASK; | |
| /* | |
| * While we write to the group register to program all lanes at once we | |
| * can read only lane registers. We configure all lanes the same way, so | |
| * here just read out lanes 0/1 and output a note if lanes 2/3 differ. | |
| */ | |
| hw_state->pcsdw12 = I915_READ(BXT_PORT_PCS_DW12_LN01(phy, ch)); | |
| if (I915_READ(BXT_PORT_PCS_DW12_LN23(phy, ch)) != hw_state->pcsdw12) | |
| DRM_DEBUG_DRIVER("lane stagger config different for lane 01 (%08x) and 23 (%08x)\n", | |
| hw_state->pcsdw12, | |
| I915_READ(BXT_PORT_PCS_DW12_LN23(phy, ch))); | |
| hw_state->pcsdw12 &= LANE_STAGGER_MASK | LANESTAGGER_STRAP_OVRD; | |
| ret = true; | |
| out: | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return ret; | |
| } | |
| /* bxt clock parameters */ | |
| struct bxt_clk_div { | |
| int clock; | |
| uint32_t p1; | |
| uint32_t p2; | |
| uint32_t m2_int; | |
| uint32_t m2_frac; | |
| bool m2_frac_en; | |
| uint32_t n; | |
| int vco; | |
| }; | |
| /* pre-calculated values for DP linkrates */ | |
| static const struct bxt_clk_div bxt_dp_clk_val[] = { | |
| {162000, 4, 2, 32, 1677722, 1, 1}, | |
| {270000, 4, 1, 27, 0, 0, 1}, | |
| {540000, 2, 1, 27, 0, 0, 1}, | |
| {216000, 3, 2, 32, 1677722, 1, 1}, | |
| {243000, 4, 1, 24, 1258291, 1, 1}, | |
| {324000, 4, 1, 32, 1677722, 1, 1}, | |
| {432000, 3, 1, 32, 1677722, 1, 1} | |
| }; | |
| static bool | |
| bxt_ddi_hdmi_pll_dividers(struct intel_crtc *intel_crtc, | |
| struct intel_crtc_state *crtc_state, int clock, | |
| struct bxt_clk_div *clk_div) | |
| { | |
| struct dpll best_clock; | |
| /* Calculate HDMI div */ | |
| /* | |
| * FIXME: tie the following calculation into | |
| * i9xx_crtc_compute_clock | |
| */ | |
| if (!bxt_find_best_dpll(crtc_state, clock, &best_clock)) { | |
| DRM_DEBUG_DRIVER("no PLL dividers found for clock %d pipe %c\n", | |
| clock, pipe_name(intel_crtc->pipe)); | |
| return false; | |
| } | |
| clk_div->p1 = best_clock.p1; | |
| clk_div->p2 = best_clock.p2; | |
| WARN_ON(best_clock.m1 != 2); | |
| clk_div->n = best_clock.n; | |
| clk_div->m2_int = best_clock.m2 >> 22; | |
| clk_div->m2_frac = best_clock.m2 & ((1 << 22) - 1); | |
| clk_div->m2_frac_en = clk_div->m2_frac != 0; | |
| clk_div->vco = best_clock.vco; | |
| return true; | |
| } | |
| static void bxt_ddi_dp_pll_dividers(int clock, struct bxt_clk_div *clk_div) | |
| { | |
| int i; | |
| *clk_div = bxt_dp_clk_val[0]; | |
| for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) { | |
| if (bxt_dp_clk_val[i].clock == clock) { | |
| *clk_div = bxt_dp_clk_val[i]; | |
| break; | |
| } | |
| } | |
| clk_div->vco = clock * 10 / 2 * clk_div->p1 * clk_div->p2; | |
| } | |
| static bool bxt_ddi_set_dpll_hw_state(int clock, | |
| struct bxt_clk_div *clk_div, | |
| struct intel_dpll_hw_state *dpll_hw_state) | |
| { | |
| int vco = clk_div->vco; | |
| uint32_t prop_coef, int_coef, gain_ctl, targ_cnt; | |
| uint32_t lanestagger; | |
| if (vco >= 6200000 && vco <= 6700000) { | |
| prop_coef = 4; | |
| int_coef = 9; | |
| gain_ctl = 3; | |
| targ_cnt = 8; | |
| } else if ((vco > 5400000 && vco < 6200000) || | |
| (vco >= 4800000 && vco < 5400000)) { | |
| prop_coef = 5; | |
| int_coef = 11; | |
| gain_ctl = 3; | |
| targ_cnt = 9; | |
| } else if (vco == 5400000) { | |
| prop_coef = 3; | |
| int_coef = 8; | |
| gain_ctl = 1; | |
| targ_cnt = 9; | |
| } else { | |
| DRM_ERROR("Invalid VCO\n"); | |
| return false; | |
| } | |
| if (clock > 270000) | |
| lanestagger = 0x18; | |
| else if (clock > 135000) | |
| lanestagger = 0x0d; | |
| else if (clock > 67000) | |
| lanestagger = 0x07; | |
| else if (clock > 33000) | |
| lanestagger = 0x04; | |
| else | |
| lanestagger = 0x02; | |
| dpll_hw_state->ebb0 = PORT_PLL_P1(clk_div->p1) | PORT_PLL_P2(clk_div->p2); | |
| dpll_hw_state->pll0 = clk_div->m2_int; | |
| dpll_hw_state->pll1 = PORT_PLL_N(clk_div->n); | |
| dpll_hw_state->pll2 = clk_div->m2_frac; | |
| if (clk_div->m2_frac_en) | |
| dpll_hw_state->pll3 = PORT_PLL_M2_FRAC_ENABLE; | |
| dpll_hw_state->pll6 = prop_coef | PORT_PLL_INT_COEFF(int_coef); | |
| dpll_hw_state->pll6 |= PORT_PLL_GAIN_CTL(gain_ctl); | |
| dpll_hw_state->pll8 = targ_cnt; | |
| dpll_hw_state->pll9 = 5 << PORT_PLL_LOCK_THRESHOLD_SHIFT; | |
| dpll_hw_state->pll10 = | |
| PORT_PLL_DCO_AMP(PORT_PLL_DCO_AMP_DEFAULT) | |
| | PORT_PLL_DCO_AMP_OVR_EN_H; | |
| dpll_hw_state->ebb4 = PORT_PLL_10BIT_CLK_ENABLE; | |
| dpll_hw_state->pcsdw12 = LANESTAGGER_STRAP_OVRD | lanestagger; | |
| return true; | |
| } | |
| static bool | |
| bxt_ddi_dp_set_dpll_hw_state(int clock, | |
| struct intel_dpll_hw_state *dpll_hw_state) | |
| { | |
| struct bxt_clk_div clk_div = {0}; | |
| bxt_ddi_dp_pll_dividers(clock, &clk_div); | |
| return bxt_ddi_set_dpll_hw_state(clock, &clk_div, dpll_hw_state); | |
| } | |
| static bool | |
| bxt_ddi_hdmi_set_dpll_hw_state(struct intel_crtc *intel_crtc, | |
| struct intel_crtc_state *crtc_state, int clock, | |
| struct intel_dpll_hw_state *dpll_hw_state) | |
| { | |
| struct bxt_clk_div clk_div = { }; | |
| bxt_ddi_hdmi_pll_dividers(intel_crtc, crtc_state, clock, &clk_div); | |
| return bxt_ddi_set_dpll_hw_state(clock, &clk_div, dpll_hw_state); | |
| } | |
| static struct intel_shared_dpll * | |
| bxt_get_dpll(struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct intel_dpll_hw_state dpll_hw_state = { }; | |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
| struct intel_shared_dpll *pll; | |
| int i, clock = crtc_state->port_clock; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) && | |
| !bxt_ddi_hdmi_set_dpll_hw_state(crtc, crtc_state, clock, | |
| &dpll_hw_state)) | |
| return NULL; | |
| if (intel_crtc_has_dp_encoder(crtc_state) && | |
| !bxt_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state)) | |
| return NULL; | |
| memset(&crtc_state->dpll_hw_state, 0, | |
| sizeof(crtc_state->dpll_hw_state)); | |
| crtc_state->dpll_hw_state = dpll_hw_state; | |
| /* 1:1 mapping between ports and PLLs */ | |
| i = (enum intel_dpll_id) encoder->port; | |
| pll = intel_get_shared_dpll_by_id(dev_priv, i); | |
| DRM_DEBUG_KMS("[CRTC:%d:%s] using pre-allocated %s\n", | |
| crtc->base.base.id, crtc->base.name, pll->info->name); | |
| intel_reference_shared_dpll(pll, crtc_state); | |
| return pll; | |
| } | |
| static void bxt_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| DRM_DEBUG_KMS("dpll_hw_state: ebb0: 0x%x, ebb4: 0x%x," | |
| "pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, " | |
| "pll6: 0x%x, pll8: 0x%x, pll9: 0x%x, pll10: 0x%x, pcsdw12: 0x%x\n", | |
| hw_state->ebb0, | |
| hw_state->ebb4, | |
| hw_state->pll0, | |
| hw_state->pll1, | |
| hw_state->pll2, | |
| hw_state->pll3, | |
| hw_state->pll6, | |
| hw_state->pll8, | |
| hw_state->pll9, | |
| hw_state->pll10, | |
| hw_state->pcsdw12); | |
| } | |
| static const struct intel_shared_dpll_funcs bxt_ddi_pll_funcs = { | |
| .enable = bxt_ddi_pll_enable, | |
| .disable = bxt_ddi_pll_disable, | |
| .get_hw_state = bxt_ddi_pll_get_hw_state, | |
| }; | |
| static void intel_ddi_pll_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| if (INTEL_GEN(dev_priv) < 9) { | |
| uint32_t val = I915_READ(LCPLL_CTL); | |
| /* | |
| * The LCPLL register should be turned on by the BIOS. For now | |
| * let's just check its state and print errors in case | |
| * something is wrong. Don't even try to turn it on. | |
| */ | |
| if (val & LCPLL_CD_SOURCE_FCLK) | |
| DRM_ERROR("CDCLK source is not LCPLL\n"); | |
| if (val & LCPLL_PLL_DISABLE) | |
| DRM_ERROR("LCPLL is disabled\n"); | |
| } | |
| } | |
| struct intel_dpll_mgr { | |
| const struct dpll_info *dpll_info; | |
| struct intel_shared_dpll *(*get_dpll)(struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder); | |
| void (*dump_hw_state)(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state); | |
| }; | |
| static const struct dpll_info pch_plls[] = { | |
| { "PCH DPLL A", &ibx_pch_dpll_funcs, DPLL_ID_PCH_PLL_A, 0 }, | |
| { "PCH DPLL B", &ibx_pch_dpll_funcs, DPLL_ID_PCH_PLL_B, 0 }, | |
| { }, | |
| }; | |
| static const struct intel_dpll_mgr pch_pll_mgr = { | |
| .dpll_info = pch_plls, | |
| .get_dpll = ibx_get_dpll, | |
| .dump_hw_state = ibx_dump_hw_state, | |
| }; | |
| static const struct dpll_info hsw_plls[] = { | |
| { "WRPLL 1", &hsw_ddi_wrpll_funcs, DPLL_ID_WRPLL1, 0 }, | |
| { "WRPLL 2", &hsw_ddi_wrpll_funcs, DPLL_ID_WRPLL2, 0 }, | |
| { "SPLL", &hsw_ddi_spll_funcs, DPLL_ID_SPLL, 0 }, | |
| { "LCPLL 810", &hsw_ddi_lcpll_funcs, DPLL_ID_LCPLL_810, INTEL_DPLL_ALWAYS_ON }, | |
| { "LCPLL 1350", &hsw_ddi_lcpll_funcs, DPLL_ID_LCPLL_1350, INTEL_DPLL_ALWAYS_ON }, | |
| { "LCPLL 2700", &hsw_ddi_lcpll_funcs, DPLL_ID_LCPLL_2700, INTEL_DPLL_ALWAYS_ON }, | |
| { }, | |
| }; | |
| static const struct intel_dpll_mgr hsw_pll_mgr = { | |
| .dpll_info = hsw_plls, | |
| .get_dpll = hsw_get_dpll, | |
| .dump_hw_state = hsw_dump_hw_state, | |
| }; | |
| static const struct dpll_info skl_plls[] = { | |
| { "DPLL 0", &skl_ddi_dpll0_funcs, DPLL_ID_SKL_DPLL0, INTEL_DPLL_ALWAYS_ON }, | |
| { "DPLL 1", &skl_ddi_pll_funcs, DPLL_ID_SKL_DPLL1, 0 }, | |
| { "DPLL 2", &skl_ddi_pll_funcs, DPLL_ID_SKL_DPLL2, 0 }, | |
| { "DPLL 3", &skl_ddi_pll_funcs, DPLL_ID_SKL_DPLL3, 0 }, | |
| { }, | |
| }; | |
| static const struct intel_dpll_mgr skl_pll_mgr = { | |
| .dpll_info = skl_plls, | |
| .get_dpll = skl_get_dpll, | |
| .dump_hw_state = skl_dump_hw_state, | |
| }; | |
| static const struct dpll_info bxt_plls[] = { | |
| { "PORT PLL A", &bxt_ddi_pll_funcs, DPLL_ID_SKL_DPLL0, 0 }, | |
| { "PORT PLL B", &bxt_ddi_pll_funcs, DPLL_ID_SKL_DPLL1, 0 }, | |
| { "PORT PLL C", &bxt_ddi_pll_funcs, DPLL_ID_SKL_DPLL2, 0 }, | |
| { }, | |
| }; | |
| static const struct intel_dpll_mgr bxt_pll_mgr = { | |
| .dpll_info = bxt_plls, | |
| .get_dpll = bxt_get_dpll, | |
| .dump_hw_state = bxt_dump_hw_state, | |
| }; | |
| static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| /* 1. Enable DPLL power in DPLL_ENABLE. */ | |
| val = I915_READ(CNL_DPLL_ENABLE(id)); | |
| val |= PLL_POWER_ENABLE; | |
| I915_WRITE(CNL_DPLL_ENABLE(id), val); | |
| /* 2. Wait for DPLL power state enabled in DPLL_ENABLE. */ | |
| if (intel_wait_for_register(dev_priv, | |
| CNL_DPLL_ENABLE(id), | |
| PLL_POWER_STATE, | |
| PLL_POWER_STATE, | |
| 5)) | |
| DRM_ERROR("PLL %d Power not enabled\n", id); | |
| /* | |
| * 3. Configure DPLL_CFGCR0 to set SSC enable/disable, | |
| * select DP mode, and set DP link rate. | |
| */ | |
| val = pll->state.hw_state.cfgcr0; | |
| I915_WRITE(CNL_DPLL_CFGCR0(id), val); | |
| /* 4. Reab back to ensure writes completed */ | |
| POSTING_READ(CNL_DPLL_CFGCR0(id)); | |
| /* 3. Configure DPLL_CFGCR0 */ | |
| /* Avoid touch CFGCR1 if HDMI mode is not enabled */ | |
| if (pll->state.hw_state.cfgcr0 & DPLL_CFGCR0_HDMI_MODE) { | |
| val = pll->state.hw_state.cfgcr1; | |
| I915_WRITE(CNL_DPLL_CFGCR1(id), val); | |
| /* 4. Reab back to ensure writes completed */ | |
| POSTING_READ(CNL_DPLL_CFGCR1(id)); | |
| } | |
| /* | |
| * 5. If the frequency will result in a change to the voltage | |
| * requirement, follow the Display Voltage Frequency Switching | |
| * Sequence Before Frequency Change | |
| * | |
| * Note: DVFS is actually handled via the cdclk code paths, | |
| * hence we do nothing here. | |
| */ | |
| /* 6. Enable DPLL in DPLL_ENABLE. */ | |
| val = I915_READ(CNL_DPLL_ENABLE(id)); | |
| val |= PLL_ENABLE; | |
| I915_WRITE(CNL_DPLL_ENABLE(id), val); | |
| /* 7. Wait for PLL lock status in DPLL_ENABLE. */ | |
| if (intel_wait_for_register(dev_priv, | |
| CNL_DPLL_ENABLE(id), | |
| PLL_LOCK, | |
| PLL_LOCK, | |
| 5)) | |
| DRM_ERROR("PLL %d not locked\n", id); | |
| /* | |
| * 8. If the frequency will result in a change to the voltage | |
| * requirement, follow the Display Voltage Frequency Switching | |
| * Sequence After Frequency Change | |
| * | |
| * Note: DVFS is actually handled via the cdclk code paths, | |
| * hence we do nothing here. | |
| */ | |
| /* | |
| * 9. turn on the clock for the DDI and map the DPLL to the DDI | |
| * Done at intel_ddi_clk_select | |
| */ | |
| } | |
| static void cnl_ddi_pll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| /* | |
| * 1. Configure DPCLKA_CFGCR0 to turn off the clock for the DDI. | |
| * Done at intel_ddi_post_disable | |
| */ | |
| /* | |
| * 2. If the frequency will result in a change to the voltage | |
| * requirement, follow the Display Voltage Frequency Switching | |
| * Sequence Before Frequency Change | |
| * | |
| * Note: DVFS is actually handled via the cdclk code paths, | |
| * hence we do nothing here. | |
| */ | |
| /* 3. Disable DPLL through DPLL_ENABLE. */ | |
| val = I915_READ(CNL_DPLL_ENABLE(id)); | |
| val &= ~PLL_ENABLE; | |
| I915_WRITE(CNL_DPLL_ENABLE(id), val); | |
| /* 4. Wait for PLL not locked status in DPLL_ENABLE. */ | |
| if (intel_wait_for_register(dev_priv, | |
| CNL_DPLL_ENABLE(id), | |
| PLL_LOCK, | |
| 0, | |
| 5)) | |
| DRM_ERROR("PLL %d locked\n", id); | |
| /* | |
| * 5. If the frequency will result in a change to the voltage | |
| * requirement, follow the Display Voltage Frequency Switching | |
| * Sequence After Frequency Change | |
| * | |
| * Note: DVFS is actually handled via the cdclk code paths, | |
| * hence we do nothing here. | |
| */ | |
| /* 6. Disable DPLL power in DPLL_ENABLE. */ | |
| val = I915_READ(CNL_DPLL_ENABLE(id)); | |
| val &= ~PLL_POWER_ENABLE; | |
| I915_WRITE(CNL_DPLL_ENABLE(id), val); | |
| /* 7. Wait for DPLL power state disabled in DPLL_ENABLE. */ | |
| if (intel_wait_for_register(dev_priv, | |
| CNL_DPLL_ENABLE(id), | |
| PLL_POWER_STATE, | |
| 0, | |
| 5)) | |
| DRM_ERROR("PLL %d Power not disabled\n", id); | |
| } | |
| static bool cnl_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| bool ret; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| ret = false; | |
| val = I915_READ(CNL_DPLL_ENABLE(id)); | |
| if (!(val & PLL_ENABLE)) | |
| goto out; | |
| val = I915_READ(CNL_DPLL_CFGCR0(id)); | |
| hw_state->cfgcr0 = val; | |
| /* avoid reading back stale values if HDMI mode is not enabled */ | |
| if (val & DPLL_CFGCR0_HDMI_MODE) { | |
| hw_state->cfgcr1 = I915_READ(CNL_DPLL_CFGCR1(id)); | |
| } | |
| ret = true; | |
| out: | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return ret; | |
| } | |
| static void cnl_wrpll_get_multipliers(int bestdiv, int *pdiv, | |
| int *qdiv, int *kdiv) | |
| { | |
| /* even dividers */ | |
| if (bestdiv % 2 == 0) { | |
| if (bestdiv == 2) { | |
| *pdiv = 2; | |
| *qdiv = 1; | |
| *kdiv = 1; | |
| } else if (bestdiv % 4 == 0) { | |
| *pdiv = 2; | |
| *qdiv = bestdiv / 4; | |
| *kdiv = 2; | |
| } else if (bestdiv % 6 == 0) { | |
| *pdiv = 3; | |
| *qdiv = bestdiv / 6; | |
| *kdiv = 2; | |
| } else if (bestdiv % 5 == 0) { | |
| *pdiv = 5; | |
| *qdiv = bestdiv / 10; | |
| *kdiv = 2; | |
| } else if (bestdiv % 14 == 0) { | |
| *pdiv = 7; | |
| *qdiv = bestdiv / 14; | |
| *kdiv = 2; | |
| } | |
| } else { | |
| if (bestdiv == 3 || bestdiv == 5 || bestdiv == 7) { | |
| *pdiv = bestdiv; | |
| *qdiv = 1; | |
| *kdiv = 1; | |
| } else { /* 9, 15, 21 */ | |
| *pdiv = bestdiv / 3; | |
| *qdiv = 1; | |
| *kdiv = 3; | |
| } | |
| } | |
| } | |
| static void cnl_wrpll_params_populate(struct skl_wrpll_params *params, | |
| u32 dco_freq, u32 ref_freq, | |
| int pdiv, int qdiv, int kdiv) | |
| { | |
| u32 dco; | |
| switch (kdiv) { | |
| case 1: | |
| params->kdiv = 1; | |
| break; | |
| case 2: | |
| params->kdiv = 2; | |
| break; | |
| case 3: | |
| params->kdiv = 4; | |
| break; | |
| default: | |
| WARN(1, "Incorrect KDiv\n"); | |
| } | |
| switch (pdiv) { | |
| case 2: | |
| params->pdiv = 1; | |
| break; | |
| case 3: | |
| params->pdiv = 2; | |
| break; | |
| case 5: | |
| params->pdiv = 4; | |
| break; | |
| case 7: | |
| params->pdiv = 8; | |
| break; | |
| default: | |
| WARN(1, "Incorrect PDiv\n"); | |
| } | |
| WARN_ON(kdiv != 2 && qdiv != 1); | |
| params->qdiv_ratio = qdiv; | |
| params->qdiv_mode = (qdiv == 1) ? 0 : 1; | |
| dco = div_u64((u64)dco_freq << 15, ref_freq); | |
| params->dco_integer = dco >> 15; | |
| params->dco_fraction = dco & 0x7fff; | |
| } | |
| static bool | |
| cnl_ddi_calculate_wrpll(int clock, | |
| struct drm_i915_private *dev_priv, | |
| struct skl_wrpll_params *wrpll_params) | |
| { | |
| u32 afe_clock = clock * 5; | |
| uint32_t ref_clock; | |
| u32 dco_min = 7998000; | |
| u32 dco_max = 10000000; | |
| u32 dco_mid = (dco_min + dco_max) / 2; | |
| static const int dividers[] = { 2, 4, 6, 8, 10, 12, 14, 16, | |
| 18, 20, 24, 28, 30, 32, 36, 40, | |
| 42, 44, 48, 50, 52, 54, 56, 60, | |
| 64, 66, 68, 70, 72, 76, 78, 80, | |
| 84, 88, 90, 92, 96, 98, 100, 102, | |
| 3, 5, 7, 9, 15, 21 }; | |
| u32 dco, best_dco = 0, dco_centrality = 0; | |
| u32 best_dco_centrality = U32_MAX; /* Spec meaning of 999999 MHz */ | |
| int d, best_div = 0, pdiv = 0, qdiv = 0, kdiv = 0; | |
| for (d = 0; d < ARRAY_SIZE(dividers); d++) { | |
| dco = afe_clock * dividers[d]; | |
| if ((dco <= dco_max) && (dco >= dco_min)) { | |
| dco_centrality = abs(dco - dco_mid); | |
| if (dco_centrality < best_dco_centrality) { | |
| best_dco_centrality = dco_centrality; | |
| best_div = dividers[d]; | |
| best_dco = dco; | |
| } | |
| } | |
| } | |
| if (best_div == 0) | |
| return false; | |
| cnl_wrpll_get_multipliers(best_div, &pdiv, &qdiv, &kdiv); | |
| ref_clock = dev_priv->cdclk.hw.ref; | |
| /* | |
| * For ICL, the spec states: if reference frequency is 38.4, use 19.2 | |
| * because the DPLL automatically divides that by 2. | |
| */ | |
| if (IS_ICELAKE(dev_priv) && ref_clock == 38400) | |
| ref_clock = 19200; | |
| cnl_wrpll_params_populate(wrpll_params, best_dco, ref_clock, pdiv, qdiv, | |
| kdiv); | |
| return true; | |
| } | |
| static bool cnl_ddi_hdmi_pll_dividers(struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state, | |
| int clock) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
| uint32_t cfgcr0, cfgcr1; | |
| struct skl_wrpll_params wrpll_params = { 0, }; | |
| cfgcr0 = DPLL_CFGCR0_HDMI_MODE; | |
| if (!cnl_ddi_calculate_wrpll(clock, dev_priv, &wrpll_params)) | |
| return false; | |
| cfgcr0 |= DPLL_CFGCR0_DCO_FRACTION(wrpll_params.dco_fraction) | | |
| wrpll_params.dco_integer; | |
| cfgcr1 = DPLL_CFGCR1_QDIV_RATIO(wrpll_params.qdiv_ratio) | | |
| DPLL_CFGCR1_QDIV_MODE(wrpll_params.qdiv_mode) | | |
| DPLL_CFGCR1_KDIV(wrpll_params.kdiv) | | |
| DPLL_CFGCR1_PDIV(wrpll_params.pdiv) | | |
| DPLL_CFGCR1_CENTRAL_FREQ; | |
| memset(&crtc_state->dpll_hw_state, 0, | |
| sizeof(crtc_state->dpll_hw_state)); | |
| crtc_state->dpll_hw_state.cfgcr0 = cfgcr0; | |
| crtc_state->dpll_hw_state.cfgcr1 = cfgcr1; | |
| return true; | |
| } | |
| static bool | |
| cnl_ddi_dp_set_dpll_hw_state(int clock, | |
| struct intel_dpll_hw_state *dpll_hw_state) | |
| { | |
| uint32_t cfgcr0; | |
| cfgcr0 = DPLL_CFGCR0_SSC_ENABLE; | |
| switch (clock / 2) { | |
| case 81000: | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_810; | |
| break; | |
| case 135000: | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_1350; | |
| break; | |
| case 270000: | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_2700; | |
| break; | |
| /* eDP 1.4 rates */ | |
| case 162000: | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_1620; | |
| break; | |
| case 108000: | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_1080; | |
| break; | |
| case 216000: | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_2160; | |
| break; | |
| case 324000: | |
| /* Some SKUs may require elevated I/O voltage to support this */ | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_3240; | |
| break; | |
| case 405000: | |
| /* Some SKUs may require elevated I/O voltage to support this */ | |
| cfgcr0 |= DPLL_CFGCR0_LINK_RATE_4050; | |
| break; | |
| } | |
| dpll_hw_state->cfgcr0 = cfgcr0; | |
| return true; | |
| } | |
| static struct intel_shared_dpll * | |
| cnl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct intel_shared_dpll *pll; | |
| int clock = crtc_state->port_clock; | |
| bool bret; | |
| struct intel_dpll_hw_state dpll_hw_state; | |
| memset(&dpll_hw_state, 0, sizeof(dpll_hw_state)); | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| bret = cnl_ddi_hdmi_pll_dividers(crtc, crtc_state, clock); | |
| if (!bret) { | |
| DRM_DEBUG_KMS("Could not get HDMI pll dividers.\n"); | |
| return NULL; | |
| } | |
| } else if (intel_crtc_has_dp_encoder(crtc_state)) { | |
| bret = cnl_ddi_dp_set_dpll_hw_state(clock, &dpll_hw_state); | |
| if (!bret) { | |
| DRM_DEBUG_KMS("Could not set DP dpll HW state.\n"); | |
| return NULL; | |
| } | |
| crtc_state->dpll_hw_state = dpll_hw_state; | |
| } else { | |
| DRM_DEBUG_KMS("Skip DPLL setup for output_types 0x%x\n", | |
| crtc_state->output_types); | |
| return NULL; | |
| } | |
| pll = intel_find_shared_dpll(crtc, crtc_state, | |
| DPLL_ID_SKL_DPLL0, | |
| DPLL_ID_SKL_DPLL2); | |
| if (!pll) { | |
| DRM_DEBUG_KMS("No PLL selected\n"); | |
| return NULL; | |
| } | |
| intel_reference_shared_dpll(pll, crtc_state); | |
| return pll; | |
| } | |
| static void cnl_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| DRM_DEBUG_KMS("dpll_hw_state: " | |
| "cfgcr0: 0x%x, cfgcr1: 0x%x\n", | |
| hw_state->cfgcr0, | |
| hw_state->cfgcr1); | |
| } | |
| static const struct intel_shared_dpll_funcs cnl_ddi_pll_funcs = { | |
| .enable = cnl_ddi_pll_enable, | |
| .disable = cnl_ddi_pll_disable, | |
| .get_hw_state = cnl_ddi_pll_get_hw_state, | |
| }; | |
| static const struct dpll_info cnl_plls[] = { | |
| { "DPLL 0", &cnl_ddi_pll_funcs, DPLL_ID_SKL_DPLL0, 0 }, | |
| { "DPLL 1", &cnl_ddi_pll_funcs, DPLL_ID_SKL_DPLL1, 0 }, | |
| { "DPLL 2", &cnl_ddi_pll_funcs, DPLL_ID_SKL_DPLL2, 0 }, | |
| { }, | |
| }; | |
| static const struct intel_dpll_mgr cnl_pll_mgr = { | |
| .dpll_info = cnl_plls, | |
| .get_dpll = cnl_get_dpll, | |
| .dump_hw_state = cnl_dump_hw_state, | |
| }; | |
| /* | |
| * These values alrea already adjusted: they're the bits we write to the | |
| * registers, not the logical values. | |
| */ | |
| static const struct skl_wrpll_params icl_dp_combo_pll_24MHz_values[] = { | |
| { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [0]: 5.4 */ | |
| .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [1]: 2.7 */ | |
| .pdiv = 0x2 /* 3 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [2]: 1.62 */ | |
| .pdiv = 0x4 /* 5 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [3]: 3.24 */ | |
| .pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x168, .dco_fraction = 0x0000, /* [4]: 2.16 */ | |
| .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 1, .qdiv_ratio = 2}, | |
| { .dco_integer = 0x168, .dco_fraction = 0x0000, /* [5]: 4.32 */ | |
| .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x195, .dco_fraction = 0x0000, /* [6]: 6.48 */ | |
| .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [7]: 8.1 */ | |
| .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| }; | |
| /* Also used for 38.4 MHz values. */ | |
| static const struct skl_wrpll_params icl_dp_combo_pll_19_2MHz_values[] = { | |
| { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [0]: 5.4 */ | |
| .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [1]: 2.7 */ | |
| .pdiv = 0x2 /* 3 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [2]: 1.62 */ | |
| .pdiv = 0x4 /* 5 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [3]: 3.24 */ | |
| .pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x1C2, .dco_fraction = 0x0000, /* [4]: 2.16 */ | |
| .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 1, .qdiv_ratio = 2}, | |
| { .dco_integer = 0x1C2, .dco_fraction = 0x0000, /* [5]: 4.32 */ | |
| .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x1FA, .dco_fraction = 0x2000, /* [6]: 6.48 */ | |
| .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [7]: 8.1 */ | |
| .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0}, | |
| }; | |
| static bool icl_calc_dp_combo_pll(struct drm_i915_private *dev_priv, int clock, | |
| struct skl_wrpll_params *pll_params) | |
| { | |
| const struct skl_wrpll_params *params; | |
| params = dev_priv->cdclk.hw.ref == 24000 ? | |
| icl_dp_combo_pll_24MHz_values : | |
| icl_dp_combo_pll_19_2MHz_values; | |
| switch (clock) { | |
| case 540000: | |
| *pll_params = params[0]; | |
| break; | |
| case 270000: | |
| *pll_params = params[1]; | |
| break; | |
| case 162000: | |
| *pll_params = params[2]; | |
| break; | |
| case 324000: | |
| *pll_params = params[3]; | |
| break; | |
| case 216000: | |
| *pll_params = params[4]; | |
| break; | |
| case 432000: | |
| *pll_params = params[5]; | |
| break; | |
| case 648000: | |
| *pll_params = params[6]; | |
| break; | |
| case 810000: | |
| *pll_params = params[7]; | |
| break; | |
| default: | |
| MISSING_CASE(clock); | |
| return false; | |
| } | |
| return true; | |
| } | |
| static bool icl_calc_dpll_state(struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder, int clock, | |
| struct intel_dpll_hw_state *pll_state) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); | |
| uint32_t cfgcr0, cfgcr1; | |
| struct skl_wrpll_params pll_params = { 0 }; | |
| bool ret; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) | |
| ret = cnl_ddi_calculate_wrpll(clock, dev_priv, &pll_params); | |
| else | |
| ret = icl_calc_dp_combo_pll(dev_priv, clock, &pll_params); | |
| if (!ret) | |
| return false; | |
| cfgcr0 = DPLL_CFGCR0_DCO_FRACTION(pll_params.dco_fraction) | | |
| pll_params.dco_integer; | |
| cfgcr1 = DPLL_CFGCR1_QDIV_RATIO(pll_params.qdiv_ratio) | | |
| DPLL_CFGCR1_QDIV_MODE(pll_params.qdiv_mode) | | |
| DPLL_CFGCR1_KDIV(pll_params.kdiv) | | |
| DPLL_CFGCR1_PDIV(pll_params.pdiv) | | |
| DPLL_CFGCR1_CENTRAL_FREQ_8400; | |
| pll_state->cfgcr0 = cfgcr0; | |
| pll_state->cfgcr1 = cfgcr1; | |
| return true; | |
| } | |
| static enum port icl_mg_pll_id_to_port(enum intel_dpll_id id) | |
| { | |
| return id - DPLL_ID_ICL_MGPLL1 + PORT_C; | |
| } | |
| static enum intel_dpll_id icl_port_to_mg_pll_id(enum port port) | |
| { | |
| return port - PORT_C + DPLL_ID_ICL_MGPLL1; | |
| } | |
| static bool icl_mg_pll_find_divisors(int clock_khz, bool is_dp, bool use_ssc, | |
| uint32_t *target_dco_khz, | |
| struct intel_dpll_hw_state *state) | |
| { | |
| uint32_t dco_min_freq, dco_max_freq; | |
| int div1_vals[] = {7, 5, 3, 2}; | |
| unsigned int i; | |
| int div2; | |
| dco_min_freq = is_dp ? 8100000 : use_ssc ? 8000000 : 7992000; | |
| dco_max_freq = is_dp ? 8100000 : 10000000; | |
| for (i = 0; i < ARRAY_SIZE(div1_vals); i++) { | |
| int div1 = div1_vals[i]; | |
| for (div2 = 10; div2 > 0; div2--) { | |
| int dco = div1 * div2 * clock_khz * 5; | |
| int a_divratio, tlinedrv, inputsel, hsdiv; | |
| if (dco < dco_min_freq || dco > dco_max_freq) | |
| continue; | |
| if (div2 >= 2) { | |
| a_divratio = is_dp ? 10 : 5; | |
| tlinedrv = 2; | |
| } else { | |
| a_divratio = 5; | |
| tlinedrv = 0; | |
| } | |
| inputsel = is_dp ? 0 : 1; | |
| switch (div1) { | |
| default: | |
| MISSING_CASE(div1); | |
| case 2: | |
| hsdiv = 0; | |
| break; | |
| case 3: | |
| hsdiv = 1; | |
| break; | |
| case 5: | |
| hsdiv = 2; | |
| break; | |
| case 7: | |
| hsdiv = 3; | |
| break; | |
| } | |
| *target_dco_khz = dco; | |
| state->mg_refclkin_ctl = MG_REFCLKIN_CTL_OD_2_MUX(1); | |
| state->mg_clktop2_coreclkctl1 = | |
| MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO(a_divratio); | |
| state->mg_clktop2_hsclkctl = | |
| MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL(tlinedrv) | | |
| MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL(inputsel) | | |
| MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO(hsdiv) | | |
| MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO(div2); | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| /* | |
| * The specification for this function uses real numbers, so the math had to be | |
| * adapted to integer-only calculation, that's why it looks so different. | |
| */ | |
| static bool icl_calc_mg_pll_state(struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder, int clock, | |
| struct intel_dpll_hw_state *pll_state) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); | |
| int refclk_khz = dev_priv->cdclk.hw.ref; | |
| uint32_t dco_khz, m1div, m2div_int, m2div_rem, m2div_frac; | |
| uint32_t iref_ndiv, iref_trim, iref_pulse_w; | |
| uint32_t prop_coeff, int_coeff; | |
| uint32_t tdc_targetcnt, feedfwgain; | |
| uint64_t ssc_stepsize, ssc_steplen, ssc_steplog; | |
| uint64_t tmp; | |
| bool use_ssc = false; | |
| bool is_dp = !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI); | |
| if (!icl_mg_pll_find_divisors(clock, is_dp, use_ssc, &dco_khz, | |
| pll_state)) { | |
| DRM_DEBUG_KMS("Failed to find divisors for clock %d\n", clock); | |
| return false; | |
| } | |
| m1div = 2; | |
| m2div_int = dco_khz / (refclk_khz * m1div); | |
| if (m2div_int > 255) { | |
| m1div = 4; | |
| m2div_int = dco_khz / (refclk_khz * m1div); | |
| if (m2div_int > 255) { | |
| DRM_DEBUG_KMS("Failed to find mdiv for clock %d\n", | |
| clock); | |
| return false; | |
| } | |
| } | |
| m2div_rem = dco_khz % (refclk_khz * m1div); | |
| tmp = (uint64_t)m2div_rem * (1 << 22); | |
| do_div(tmp, refclk_khz * m1div); | |
| m2div_frac = tmp; | |
| switch (refclk_khz) { | |
| case 19200: | |
| iref_ndiv = 1; | |
| iref_trim = 28; | |
| iref_pulse_w = 1; | |
| break; | |
| case 24000: | |
| iref_ndiv = 1; | |
| iref_trim = 25; | |
| iref_pulse_w = 2; | |
| break; | |
| case 38400: | |
| iref_ndiv = 2; | |
| iref_trim = 28; | |
| iref_pulse_w = 1; | |
| break; | |
| default: | |
| MISSING_CASE(refclk_khz); | |
| return false; | |
| } | |
| /* | |
| * tdc_res = 0.000003 | |
| * tdc_targetcnt = int(2 / (tdc_res * 8 * 50 * 1.1) / refclk_mhz + 0.5) | |
| * | |
| * The multiplication by 1000 is due to refclk MHz to KHz conversion. It | |
| * was supposed to be a division, but we rearranged the operations of | |
| * the formula to avoid early divisions so we don't multiply the | |
| * rounding errors. | |
| * | |
| * 0.000003 * 8 * 50 * 1.1 = 0.00132, also known as 132 / 100000, which | |
| * we also rearrange to work with integers. | |
| * | |
| * The 0.5 transformed to 5 results in a multiplication by 10 and the | |
| * last division by 10. | |
| */ | |
| tdc_targetcnt = (2 * 1000 * 100000 * 10 / (132 * refclk_khz) + 5) / 10; | |
| /* | |
| * Here we divide dco_khz by 10 in order to allow the dividend to fit in | |
| * 32 bits. That's not a problem since we round the division down | |
| * anyway. | |
| */ | |
| feedfwgain = (use_ssc || m2div_rem > 0) ? | |
| m1div * 1000000 * 100 / (dco_khz * 3 / 10) : 0; | |
| if (dco_khz >= 9000000) { | |
| prop_coeff = 5; | |
| int_coeff = 10; | |
| } else { | |
| prop_coeff = 4; | |
| int_coeff = 8; | |
| } | |
| if (use_ssc) { | |
| tmp = (uint64_t)dco_khz * 47 * 32; | |
| do_div(tmp, refclk_khz * m1div * 10000); | |
| ssc_stepsize = tmp; | |
| tmp = (uint64_t)dco_khz * 1000; | |
| ssc_steplen = DIV_ROUND_UP_ULL(tmp, 32 * 2 * 32); | |
| } else { | |
| ssc_stepsize = 0; | |
| ssc_steplen = 0; | |
| } | |
| ssc_steplog = 4; | |
| pll_state->mg_pll_div0 = (m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H : 0) | | |
| MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) | | |
| MG_PLL_DIV0_FBDIV_INT(m2div_int); | |
| pll_state->mg_pll_div1 = MG_PLL_DIV1_IREF_NDIVRATIO(iref_ndiv) | | |
| MG_PLL_DIV1_DITHER_DIV_2 | | |
| MG_PLL_DIV1_NDIVRATIO(1) | | |
| MG_PLL_DIV1_FBPREDIV(m1div); | |
| pll_state->mg_pll_lf = MG_PLL_LF_TDCTARGETCNT(tdc_targetcnt) | | |
| MG_PLL_LF_AFCCNTSEL_512 | | |
| MG_PLL_LF_GAINCTRL(1) | | |
| MG_PLL_LF_INT_COEFF(int_coeff) | | |
| MG_PLL_LF_PROP_COEFF(prop_coeff); | |
| pll_state->mg_pll_frac_lock = MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32 | | |
| MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32 | | |
| MG_PLL_FRAC_LOCK_LOCKTHRESH(10) | | |
| MG_PLL_FRAC_LOCK_DCODITHEREN | | |
| MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(feedfwgain); | |
| if (use_ssc || m2div_rem > 0) | |
| pll_state->mg_pll_frac_lock |= MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN; | |
| pll_state->mg_pll_ssc = (use_ssc ? MG_PLL_SSC_EN : 0) | | |
| MG_PLL_SSC_TYPE(2) | | |
| MG_PLL_SSC_STEPLENGTH(ssc_steplen) | | |
| MG_PLL_SSC_STEPNUM(ssc_steplog) | | |
| MG_PLL_SSC_FLLEN | | |
| MG_PLL_SSC_STEPSIZE(ssc_stepsize); | |
| pll_state->mg_pll_tdc_coldst_bias = MG_PLL_TDC_COLDST_COLDSTART; | |
| if (refclk_khz != 38400) { | |
| pll_state->mg_pll_tdc_coldst_bias |= | |
| MG_PLL_TDC_COLDST_IREFINT_EN | | |
| MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pulse_w) | | |
| MG_PLL_TDC_COLDST_COLDSTART | | |
| MG_PLL_TDC_TDCOVCCORR_EN | | |
| MG_PLL_TDC_TDCSEL(3); | |
| pll_state->mg_pll_bias = MG_PLL_BIAS_BIAS_GB_SEL(3) | | |
| MG_PLL_BIAS_INIT_DCOAMP(0x3F) | | |
| MG_PLL_BIAS_BIAS_BONUS(10) | | |
| MG_PLL_BIAS_BIASCAL_EN | | |
| MG_PLL_BIAS_CTRIM(12) | | |
| MG_PLL_BIAS_VREF_RDAC(4) | | |
| MG_PLL_BIAS_IREFTRIM(iref_trim); | |
| } | |
| return true; | |
| } | |
| static struct intel_shared_dpll * | |
| icl_get_dpll(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct intel_shared_dpll *pll; | |
| struct intel_dpll_hw_state pll_state = {}; | |
| enum port port = encoder->port; | |
| enum intel_dpll_id min, max; | |
| int clock = crtc_state->port_clock; | |
| bool ret; | |
| switch (port) { | |
| case PORT_A: | |
| case PORT_B: | |
| min = DPLL_ID_ICL_DPLL0; | |
| max = DPLL_ID_ICL_DPLL1; | |
| ret = icl_calc_dpll_state(crtc_state, encoder, clock, | |
| &pll_state); | |
| break; | |
| case PORT_C: | |
| case PORT_D: | |
| case PORT_E: | |
| case PORT_F: | |
| min = icl_port_to_mg_pll_id(port); | |
| max = min; | |
| ret = icl_calc_mg_pll_state(crtc_state, encoder, clock, | |
| &pll_state); | |
| break; | |
| default: | |
| MISSING_CASE(port); | |
| return NULL; | |
| } | |
| if (!ret) { | |
| DRM_DEBUG_KMS("Could not calculate PLL state.\n"); | |
| return NULL; | |
| } | |
| crtc_state->dpll_hw_state = pll_state; | |
| pll = intel_find_shared_dpll(crtc, crtc_state, min, max); | |
| if (!pll) { | |
| DRM_DEBUG_KMS("No PLL selected\n"); | |
| return NULL; | |
| } | |
| intel_reference_shared_dpll(pll, crtc_state); | |
| return pll; | |
| } | |
| static i915_reg_t icl_pll_id_to_enable_reg(enum intel_dpll_id id) | |
| { | |
| switch (id) { | |
| default: | |
| MISSING_CASE(id); | |
| case DPLL_ID_ICL_DPLL0: | |
| case DPLL_ID_ICL_DPLL1: | |
| return CNL_DPLL_ENABLE(id); | |
| case DPLL_ID_ICL_MGPLL1: | |
| case DPLL_ID_ICL_MGPLL2: | |
| case DPLL_ID_ICL_MGPLL3: | |
| case DPLL_ID_ICL_MGPLL4: | |
| return MG_PLL_ENABLE(icl_mg_pll_id_to_port(id)); | |
| } | |
| } | |
| static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| uint32_t val; | |
| enum port port; | |
| bool ret = false; | |
| if (!intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_PLLS)) | |
| return false; | |
| val = I915_READ(icl_pll_id_to_enable_reg(id)); | |
| if (!(val & PLL_ENABLE)) | |
| goto out; | |
| switch (id) { | |
| case DPLL_ID_ICL_DPLL0: | |
| case DPLL_ID_ICL_DPLL1: | |
| hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id)); | |
| hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id)); | |
| break; | |
| case DPLL_ID_ICL_MGPLL1: | |
| case DPLL_ID_ICL_MGPLL2: | |
| case DPLL_ID_ICL_MGPLL3: | |
| case DPLL_ID_ICL_MGPLL4: | |
| port = icl_mg_pll_id_to_port(id); | |
| hw_state->mg_refclkin_ctl = I915_READ(MG_REFCLKIN_CTL(port)); | |
| hw_state->mg_clktop2_coreclkctl1 = | |
| I915_READ(MG_CLKTOP2_CORECLKCTL1(port)); | |
| hw_state->mg_clktop2_hsclkctl = | |
| I915_READ(MG_CLKTOP2_HSCLKCTL(port)); | |
| hw_state->mg_pll_div0 = I915_READ(MG_PLL_DIV0(port)); | |
| hw_state->mg_pll_div1 = I915_READ(MG_PLL_DIV1(port)); | |
| hw_state->mg_pll_lf = I915_READ(MG_PLL_LF(port)); | |
| hw_state->mg_pll_frac_lock = I915_READ(MG_PLL_FRAC_LOCK(port)); | |
| hw_state->mg_pll_ssc = I915_READ(MG_PLL_SSC(port)); | |
| hw_state->mg_pll_bias = I915_READ(MG_PLL_BIAS(port)); | |
| hw_state->mg_pll_tdc_coldst_bias = | |
| I915_READ(MG_PLL_TDC_COLDST_BIAS(port)); | |
| break; | |
| default: | |
| MISSING_CASE(id); | |
| } | |
| ret = true; | |
| out: | |
| intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); | |
| return ret; | |
| } | |
| static void icl_dpll_write(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| struct intel_dpll_hw_state *hw_state = &pll->state.hw_state; | |
| const enum intel_dpll_id id = pll->info->id; | |
| I915_WRITE(ICL_DPLL_CFGCR0(id), hw_state->cfgcr0); | |
| I915_WRITE(ICL_DPLL_CFGCR1(id), hw_state->cfgcr1); | |
| POSTING_READ(ICL_DPLL_CFGCR1(id)); | |
| } | |
| static void icl_mg_pll_write(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| struct intel_dpll_hw_state *hw_state = &pll->state.hw_state; | |
| enum port port = icl_mg_pll_id_to_port(pll->info->id); | |
| I915_WRITE(MG_REFCLKIN_CTL(port), hw_state->mg_refclkin_ctl); | |
| I915_WRITE(MG_CLKTOP2_CORECLKCTL1(port), | |
| hw_state->mg_clktop2_coreclkctl1); | |
| I915_WRITE(MG_CLKTOP2_HSCLKCTL(port), hw_state->mg_clktop2_hsclkctl); | |
| I915_WRITE(MG_PLL_DIV0(port), hw_state->mg_pll_div0); | |
| I915_WRITE(MG_PLL_DIV1(port), hw_state->mg_pll_div1); | |
| I915_WRITE(MG_PLL_LF(port), hw_state->mg_pll_lf); | |
| I915_WRITE(MG_PLL_FRAC_LOCK(port), hw_state->mg_pll_frac_lock); | |
| I915_WRITE(MG_PLL_SSC(port), hw_state->mg_pll_ssc); | |
| I915_WRITE(MG_PLL_BIAS(port), hw_state->mg_pll_bias); | |
| I915_WRITE(MG_PLL_TDC_COLDST_BIAS(port), | |
| hw_state->mg_pll_tdc_coldst_bias); | |
| POSTING_READ(MG_PLL_TDC_COLDST_BIAS(port)); | |
| } | |
| static void icl_pll_enable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| i915_reg_t enable_reg = icl_pll_id_to_enable_reg(id); | |
| uint32_t val; | |
| val = I915_READ(enable_reg); | |
| val |= PLL_POWER_ENABLE; | |
| I915_WRITE(enable_reg, val); | |
| /* | |
| * The spec says we need to "wait" but it also says it should be | |
| * immediate. | |
| */ | |
| if (intel_wait_for_register(dev_priv, enable_reg, PLL_POWER_STATE, | |
| PLL_POWER_STATE, 1)) | |
| DRM_ERROR("PLL %d Power not enabled\n", id); | |
| switch (id) { | |
| case DPLL_ID_ICL_DPLL0: | |
| case DPLL_ID_ICL_DPLL1: | |
| icl_dpll_write(dev_priv, pll); | |
| break; | |
| case DPLL_ID_ICL_MGPLL1: | |
| case DPLL_ID_ICL_MGPLL2: | |
| case DPLL_ID_ICL_MGPLL3: | |
| case DPLL_ID_ICL_MGPLL4: | |
| icl_mg_pll_write(dev_priv, pll); | |
| break; | |
| default: | |
| MISSING_CASE(id); | |
| } | |
| /* | |
| * DVFS pre sequence would be here, but in our driver the cdclk code | |
| * paths should already be setting the appropriate voltage, hence we do | |
| * nothign here. | |
| */ | |
| val = I915_READ(enable_reg); | |
| val |= PLL_ENABLE; | |
| I915_WRITE(enable_reg, val); | |
| if (intel_wait_for_register(dev_priv, enable_reg, PLL_LOCK, PLL_LOCK, | |
| 1)) /* 600us actually. */ | |
| DRM_ERROR("PLL %d not locked\n", id); | |
| /* DVFS post sequence would be here. See the comment above. */ | |
| } | |
| static void icl_pll_disable(struct drm_i915_private *dev_priv, | |
| struct intel_shared_dpll *pll) | |
| { | |
| const enum intel_dpll_id id = pll->info->id; | |
| i915_reg_t enable_reg = icl_pll_id_to_enable_reg(id); | |
| uint32_t val; | |
| /* The first steps are done by intel_ddi_post_disable(). */ | |
| /* | |
| * DVFS pre sequence would be here, but in our driver the cdclk code | |
| * paths should already be setting the appropriate voltage, hence we do | |
| * nothign here. | |
| */ | |
| val = I915_READ(enable_reg); | |
| val &= ~PLL_ENABLE; | |
| I915_WRITE(enable_reg, val); | |
| /* Timeout is actually 1us. */ | |
| if (intel_wait_for_register(dev_priv, enable_reg, PLL_LOCK, 0, 1)) | |
| DRM_ERROR("PLL %d locked\n", id); | |
| /* DVFS post sequence would be here. See the comment above. */ | |
| val = I915_READ(enable_reg); | |
| val &= ~PLL_POWER_ENABLE; | |
| I915_WRITE(enable_reg, val); | |
| /* | |
| * The spec says we need to "wait" but it also says it should be | |
| * immediate. | |
| */ | |
| if (intel_wait_for_register(dev_priv, enable_reg, PLL_POWER_STATE, 0, | |
| 1)) | |
| DRM_ERROR("PLL %d Power not disabled\n", id); | |
| } | |
| static void icl_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| DRM_DEBUG_KMS("dpll_hw_state: cfgcr0: 0x%x, cfgcr1: 0x%x, " | |
| "mg_refclkin_ctl: 0x%x, hg_clktop2_coreclkctl1: 0x%x, " | |
| "mg_clktop2_hsclkctl: 0x%x, mg_pll_div0: 0x%x, " | |
| "mg_pll_div2: 0x%x, mg_pll_lf: 0x%x, " | |
| "mg_pll_frac_lock: 0x%x, mg_pll_ssc: 0x%x, " | |
| "mg_pll_bias: 0x%x, mg_pll_tdc_coldst_bias: 0x%x\n", | |
| hw_state->cfgcr0, hw_state->cfgcr1, | |
| hw_state->mg_refclkin_ctl, | |
| hw_state->mg_clktop2_coreclkctl1, | |
| hw_state->mg_clktop2_hsclkctl, | |
| hw_state->mg_pll_div0, | |
| hw_state->mg_pll_div1, | |
| hw_state->mg_pll_lf, | |
| hw_state->mg_pll_frac_lock, | |
| hw_state->mg_pll_ssc, | |
| hw_state->mg_pll_bias, | |
| hw_state->mg_pll_tdc_coldst_bias); | |
| } | |
| static const struct intel_shared_dpll_funcs icl_pll_funcs = { | |
| .enable = icl_pll_enable, | |
| .disable = icl_pll_disable, | |
| .get_hw_state = icl_pll_get_hw_state, | |
| }; | |
| static const struct dpll_info icl_plls[] = { | |
| { "DPLL 0", &icl_pll_funcs, DPLL_ID_ICL_DPLL0, 0 }, | |
| { "DPLL 1", &icl_pll_funcs, DPLL_ID_ICL_DPLL1, 0 }, | |
| { "MG PLL 1", &icl_pll_funcs, DPLL_ID_ICL_MGPLL1, 0 }, | |
| { "MG PLL 2", &icl_pll_funcs, DPLL_ID_ICL_MGPLL2, 0 }, | |
| { "MG PLL 3", &icl_pll_funcs, DPLL_ID_ICL_MGPLL3, 0 }, | |
| { "MG PLL 4", &icl_pll_funcs, DPLL_ID_ICL_MGPLL4, 0 }, | |
| { }, | |
| }; | |
| static const struct intel_dpll_mgr icl_pll_mgr = { | |
| .dpll_info = icl_plls, | |
| .get_dpll = icl_get_dpll, | |
| .dump_hw_state = icl_dump_hw_state, | |
| }; | |
| /** | |
| * intel_shared_dpll_init - Initialize shared DPLLs | |
| * @dev: drm device | |
| * | |
| * Initialize shared DPLLs for @dev. | |
| */ | |
| void intel_shared_dpll_init(struct drm_device *dev) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| const struct intel_dpll_mgr *dpll_mgr = NULL; | |
| const struct dpll_info *dpll_info; | |
| int i; | |
| if (IS_ICELAKE(dev_priv)) | |
| dpll_mgr = &icl_pll_mgr; | |
| else if (IS_CANNONLAKE(dev_priv)) | |
| dpll_mgr = &cnl_pll_mgr; | |
| else if (IS_GEN9_BC(dev_priv)) | |
| dpll_mgr = &skl_pll_mgr; | |
| else if (IS_GEN9_LP(dev_priv)) | |
| dpll_mgr = &bxt_pll_mgr; | |
| else if (HAS_DDI(dev_priv)) | |
| dpll_mgr = &hsw_pll_mgr; | |
| else if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) | |
| dpll_mgr = &pch_pll_mgr; | |
| if (!dpll_mgr) { | |
| dev_priv->num_shared_dpll = 0; | |
| return; | |
| } | |
| dpll_info = dpll_mgr->dpll_info; | |
| for (i = 0; dpll_info[i].name; i++) { | |
| WARN_ON(i != dpll_info[i].id); | |
| dev_priv->shared_dplls[i].info = &dpll_info[i]; | |
| } | |
| dev_priv->dpll_mgr = dpll_mgr; | |
| dev_priv->num_shared_dpll = i; | |
| mutex_init(&dev_priv->dpll_lock); | |
| BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS); | |
| /* FIXME: Move this to a more suitable place */ | |
| if (HAS_DDI(dev_priv)) | |
| intel_ddi_pll_init(dev); | |
| } | |
| /** | |
| * intel_get_shared_dpll - get a shared DPLL for CRTC and encoder combination | |
| * @crtc: CRTC | |
| * @crtc_state: atomic state for @crtc | |
| * @encoder: encoder | |
| * | |
| * Find an appropriate DPLL for the given CRTC and encoder combination. A | |
| * reference from the @crtc to the returned pll is registered in the atomic | |
| * state. That configuration is made effective by calling | |
| * intel_shared_dpll_swap_state(). The reference should be released by calling | |
| * intel_release_shared_dpll(). | |
| * | |
| * Returns: | |
| * A shared DPLL to be used by @crtc and @encoder with the given @crtc_state. | |
| */ | |
| struct intel_shared_dpll * | |
| intel_get_shared_dpll(struct intel_crtc *crtc, | |
| struct intel_crtc_state *crtc_state, | |
| struct intel_encoder *encoder) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); | |
| const struct intel_dpll_mgr *dpll_mgr = dev_priv->dpll_mgr; | |
| if (WARN_ON(!dpll_mgr)) | |
| return NULL; | |
| return dpll_mgr->get_dpll(crtc, crtc_state, encoder); | |
| } | |
| /** | |
| * intel_release_shared_dpll - end use of DPLL by CRTC in atomic state | |
| * @dpll: dpll in use by @crtc | |
| * @crtc: crtc | |
| * @state: atomic state | |
| * | |
| * This function releases the reference from @crtc to @dpll from the | |
| * atomic @state. The new configuration is made effective by calling | |
| * intel_shared_dpll_swap_state(). | |
| */ | |
| void intel_release_shared_dpll(struct intel_shared_dpll *dpll, | |
| struct intel_crtc *crtc, | |
| struct drm_atomic_state *state) | |
| { | |
| struct intel_shared_dpll_state *shared_dpll_state; | |
| shared_dpll_state = intel_atomic_get_shared_dpll_state(state); | |
| shared_dpll_state[dpll->info->id].crtc_mask &= ~(1 << crtc->pipe); | |
| } | |
| /** | |
| * intel_shared_dpll_dump_hw_state - write hw_state to dmesg | |
| * @dev_priv: i915 drm device | |
| * @hw_state: hw state to be written to the log | |
| * | |
| * Write the relevant values in @hw_state to dmesg using DRM_DEBUG_KMS. | |
| */ | |
| void intel_dpll_dump_hw_state(struct drm_i915_private *dev_priv, | |
| struct intel_dpll_hw_state *hw_state) | |
| { | |
| if (dev_priv->dpll_mgr) { | |
| dev_priv->dpll_mgr->dump_hw_state(dev_priv, hw_state); | |
| } else { | |
| /* fallback for platforms that don't use the shared dpll | |
| * infrastructure | |
| */ | |
| DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, " | |
| "fp0: 0x%x, fp1: 0x%x\n", | |
| hw_state->dpll, | |
| hw_state->dpll_md, | |
| hw_state->fp0, | |
| hw_state->fp1); | |
| } | |
| } |