| // SPDX-License-Identifier: GPL-2.0+ | |
| // | |
| // Security related flags and so on. | |
| // | |
| // Copyright 2018, Michael Ellerman, IBM Corporation. | |
| #include <linux/kernel.h> | |
| #include <linux/device.h> | |
| #include <linux/seq_buf.h> | |
| #include <asm/debugfs.h> | |
| #include <asm/security_features.h> | |
| #include <asm/setup.h> | |
| unsigned long powerpc_security_features __read_mostly = SEC_FTR_DEFAULT; | |
| bool barrier_nospec_enabled; | |
| static void enable_barrier_nospec(bool enable) | |
| { | |
| barrier_nospec_enabled = enable; | |
| do_barrier_nospec_fixups(enable); | |
| } | |
| void setup_barrier_nospec(void) | |
| { | |
| bool enable; | |
| /* | |
| * It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well. | |
| * But there's a good reason not to. The two flags we check below are | |
| * both are enabled by default in the kernel, so if the hcall is not | |
| * functional they will be enabled. | |
| * On a system where the host firmware has been updated (so the ori | |
| * functions as a barrier), but on which the hypervisor (KVM/Qemu) has | |
| * not been updated, we would like to enable the barrier. Dropping the | |
| * check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is | |
| * we potentially enable the barrier on systems where the host firmware | |
| * is not updated, but that's harmless as it's a no-op. | |
| */ | |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && | |
| security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR); | |
| enable_barrier_nospec(enable); | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static int barrier_nospec_set(void *data, u64 val) | |
| { | |
| switch (val) { | |
| case 0: | |
| case 1: | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (!!val == !!barrier_nospec_enabled) | |
| return 0; | |
| enable_barrier_nospec(!!val); | |
| return 0; | |
| } | |
| static int barrier_nospec_get(void *data, u64 *val) | |
| { | |
| *val = barrier_nospec_enabled ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fops_barrier_nospec, | |
| barrier_nospec_get, barrier_nospec_set, "%llu\n"); | |
| static __init int barrier_nospec_debugfs_init(void) | |
| { | |
| debugfs_create_file("barrier_nospec", 0600, powerpc_debugfs_root, NULL, | |
| &fops_barrier_nospec); | |
| return 0; | |
| } | |
| device_initcall(barrier_nospec_debugfs_init); | |
| #endif /* CONFIG_DEBUG_FS */ | |
| ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| bool thread_priv; | |
| thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV); | |
| if (rfi_flush || thread_priv) { | |
| struct seq_buf s; | |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); | |
| seq_buf_printf(&s, "Mitigation: "); | |
| if (rfi_flush) | |
| seq_buf_printf(&s, "RFI Flush"); | |
| if (rfi_flush && thread_priv) | |
| seq_buf_printf(&s, ", "); | |
| if (thread_priv) | |
| seq_buf_printf(&s, "L1D private per thread"); | |
| seq_buf_printf(&s, "\n"); | |
| return s.len; | |
| } | |
| if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && | |
| !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) | |
| return sprintf(buf, "Not affected\n"); | |
| return sprintf(buf, "Vulnerable\n"); | |
| } | |
| ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| if (!security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) | |
| return sprintf(buf, "Not affected\n"); | |
| if (barrier_nospec_enabled) | |
| return sprintf(buf, "Mitigation: __user pointer sanitization\n"); | |
| return sprintf(buf, "Vulnerable\n"); | |
| } | |
| ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| bool bcs, ccd, ori; | |
| struct seq_buf s; | |
| seq_buf_init(&s, buf, PAGE_SIZE - 1); | |
| bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED); | |
| ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED); | |
| ori = security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31); | |
| if (bcs || ccd) { | |
| seq_buf_printf(&s, "Mitigation: "); | |
| if (bcs) | |
| seq_buf_printf(&s, "Indirect branch serialisation (kernel only)"); | |
| if (bcs && ccd) | |
| seq_buf_printf(&s, ", "); | |
| if (ccd) | |
| seq_buf_printf(&s, "Indirect branch cache disabled"); | |
| } else | |
| seq_buf_printf(&s, "Vulnerable"); | |
| if (ori) | |
| seq_buf_printf(&s, ", ori31 speculation barrier enabled"); | |
| seq_buf_printf(&s, "\n"); | |
| return s.len; | |
| } | |
| /* | |
| * Store-forwarding barrier support. | |
| */ | |
| static enum stf_barrier_type stf_enabled_flush_types; | |
| static bool no_stf_barrier; | |
| bool stf_barrier; | |
| static int __init handle_no_stf_barrier(char *p) | |
| { | |
| pr_info("stf-barrier: disabled on command line."); | |
| no_stf_barrier = true; | |
| return 0; | |
| } | |
| early_param("no_stf_barrier", handle_no_stf_barrier); | |
| /* This is the generic flag used by other architectures */ | |
| static int __init handle_ssbd(char *p) | |
| { | |
| if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) { | |
| /* Until firmware tells us, we have the barrier with auto */ | |
| return 0; | |
| } else if (strncmp(p, "off", 3) == 0) { | |
| handle_no_stf_barrier(NULL); | |
| return 0; | |
| } else | |
| return 1; | |
| return 0; | |
| } | |
| early_param("spec_store_bypass_disable", handle_ssbd); | |
| /* This is the generic flag used by other architectures */ | |
| static int __init handle_no_ssbd(char *p) | |
| { | |
| handle_no_stf_barrier(NULL); | |
| return 0; | |
| } | |
| early_param("nospec_store_bypass_disable", handle_no_ssbd); | |
| static void stf_barrier_enable(bool enable) | |
| { | |
| if (enable) | |
| do_stf_barrier_fixups(stf_enabled_flush_types); | |
| else | |
| do_stf_barrier_fixups(STF_BARRIER_NONE); | |
| stf_barrier = enable; | |
| } | |
| void setup_stf_barrier(void) | |
| { | |
| enum stf_barrier_type type; | |
| bool enable, hv; | |
| hv = cpu_has_feature(CPU_FTR_HVMODE); | |
| /* Default to fallback in case fw-features are not available */ | |
| if (cpu_has_feature(CPU_FTR_ARCH_300)) | |
| type = STF_BARRIER_EIEIO; | |
| else if (cpu_has_feature(CPU_FTR_ARCH_207S)) | |
| type = STF_BARRIER_SYNC_ORI; | |
| else if (cpu_has_feature(CPU_FTR_ARCH_206)) | |
| type = STF_BARRIER_FALLBACK; | |
| else | |
| type = STF_BARRIER_NONE; | |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && | |
| (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || | |
| (security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && hv)); | |
| if (type == STF_BARRIER_FALLBACK) { | |
| pr_info("stf-barrier: fallback barrier available\n"); | |
| } else if (type == STF_BARRIER_SYNC_ORI) { | |
| pr_info("stf-barrier: hwsync barrier available\n"); | |
| } else if (type == STF_BARRIER_EIEIO) { | |
| pr_info("stf-barrier: eieio barrier available\n"); | |
| } | |
| stf_enabled_flush_types = type; | |
| if (!no_stf_barrier) | |
| stf_barrier_enable(enable); | |
| } | |
| ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf) | |
| { | |
| if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) { | |
| const char *type; | |
| switch (stf_enabled_flush_types) { | |
| case STF_BARRIER_EIEIO: | |
| type = "eieio"; | |
| break; | |
| case STF_BARRIER_SYNC_ORI: | |
| type = "hwsync"; | |
| break; | |
| case STF_BARRIER_FALLBACK: | |
| type = "fallback"; | |
| break; | |
| default: | |
| type = "unknown"; | |
| } | |
| return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type); | |
| } | |
| if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && | |
| !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)) | |
| return sprintf(buf, "Not affected\n"); | |
| return sprintf(buf, "Vulnerable\n"); | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| static int stf_barrier_set(void *data, u64 val) | |
| { | |
| bool enable; | |
| if (val == 1) | |
| enable = true; | |
| else if (val == 0) | |
| enable = false; | |
| else | |
| return -EINVAL; | |
| /* Only do anything if we're changing state */ | |
| if (enable != stf_barrier) | |
| stf_barrier_enable(enable); | |
| return 0; | |
| } | |
| static int stf_barrier_get(void *data, u64 *val) | |
| { | |
| *val = stf_barrier ? 1 : 0; | |
| return 0; | |
| } | |
| DEFINE_SIMPLE_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, "%llu\n"); | |
| static __init int stf_barrier_debugfs_init(void) | |
| { | |
| debugfs_create_file("stf_barrier", 0600, powerpc_debugfs_root, NULL, &fops_stf_barrier); | |
| return 0; | |
| } | |
| device_initcall(stf_barrier_debugfs_init); | |
| #endif /* CONFIG_DEBUG_FS */ |