| Command DB | |
| --------- | |
| Command DB is a database that provides a mapping between resource key and the | |
| resource address for a system resource managed by a remote processor. The data | |
| is stored in a shared memory region and is loaded by the remote processor. | |
| Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for | |
| controlling shared resources. Depending on the board configuration the shared | |
| resource properties may change. These properties are dynamically probed by the | |
| remote processor and made available in the shared memory. | |
| The bindings for Command DB is specified in the reserved-memory section in | |
| devicetree. The devicetree representation of the command DB driver should be: | |
| Properties: | |
| - compatible: | |
| Usage: required | |
| Value type: <string> | |
| Definition: Should be "qcom,cmd-db" | |
| - reg: | |
| Usage: required | |
| Value type: <prop encoded array> | |
| Definition: The register address that points to the actual location of | |
| the Command DB in memory. | |
| Example: | |
| reserved-memory { | |
| [...] | |
| reserved-memory@85fe0000 { | |
| reg = <0x0 0x85fe0000 0x0 0x20000>; | |
| compatible = "qcom,cmd-db"; | |
| no-map; | |
| }; | |
| }; |