blob: 6fd91b31a131857c9dd70002245f99220adc5a31 [file] [log] [blame]
/*
* Copyright (C) 2012,2013 - ARM Ltd
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_mmu.h>
#include <asm/pgtable-hwdef.h>
#include <asm/sysreg.h>
#include <asm/virt.h>
.text
.pushsection .hyp.idmap.text, "ax"
.align 11
ENTRY(__kvm_hyp_init)
ventry __invalid // Synchronous EL2t
ventry __invalid // IRQ EL2t
ventry __invalid // FIQ EL2t
ventry __invalid // Error EL2t
ventry __invalid // Synchronous EL2h
ventry __invalid // IRQ EL2h
ventry __invalid // FIQ EL2h
ventry __invalid // Error EL2h
ventry __do_hyp_init // Synchronous 64-bit EL1
ventry __invalid // IRQ 64-bit EL1
ventry __invalid // FIQ 64-bit EL1
ventry __invalid // Error 64-bit EL1
ventry __invalid // Synchronous 32-bit EL1
ventry __invalid // IRQ 32-bit EL1
ventry __invalid // FIQ 32-bit EL1
ventry __invalid // Error 32-bit EL1
__invalid:
b .
/*
* x0: HYP pgd
* x1: HYP stack
* x2: HYP vectors
*/
__do_hyp_init:
/* Check for a stub HVC call */
cmp x0, #HVC_STUB_HCALL_NR
b.lo __kvm_handle_stub_hvc
phys_to_ttbr x4, x0
msr ttbr0_el2, x4
mrs x4, tcr_el1
ldr x5, =TCR_EL2_MASK
and x4, x4, x5
mov x5, #TCR_EL2_RES1
orr x4, x4, x5
/*
* The ID map may be configured to use an extended virtual address
* range. This is only the case if system RAM is out of range for the
* currently configured page size and VA_BITS, in which case we will
* also need the extended virtual range for the HYP ID map, or we won't
* be able to enable the EL2 MMU.
*
* However, at EL2, there is only one TTBR register, and we can't switch
* between translation tables *and* update TCR_EL2.T0SZ at the same
* time. Bottom line: we need to use the extended range with *both* our
* translation tables.
*
* So use the same T0SZ value we use for the ID map.
*/
ldr_l x5, idmap_t0sz
bfi x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
/*
* Set the PS bits in TCR_EL2.
*/
tcr_compute_pa_size x4, #TCR_EL2_PS_SHIFT, x5, x6
msr tcr_el2, x4
mrs x4, mair_el1
msr mair_el2, x4
isb
/* Invalidate the stale TLBs from Bootloader */
tlbi alle2
dsb sy
/*
* Preserve all the RES1 bits while setting the default flags,
* as well as the EE bit on BE. Drop the A flag since the compiler
* is allowed to generate unaligned accesses.
*/
ldr x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
CPU_BE( orr x4, x4, #SCTLR_ELx_EE)
msr sctlr_el2, x4
isb
/* Set the stack and new vectors */
kern_hyp_va x1
mov sp, x1
msr vbar_el2, x2
/* copy tpidr_el1 into tpidr_el2 for use by HYP */
mrs x1, tpidr_el1
msr tpidr_el2, x1
/* Hello, World! */
eret
ENDPROC(__kvm_hyp_init)
ENTRY(__kvm_handle_stub_hvc)
cmp x0, #HVC_SOFT_RESTART
b.ne 1f
/* This is where we're about to jump, staying at EL2 */
msr elr_el2, x1
mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT | PSR_MODE_EL2h)
msr spsr_el2, x0
/* Shuffle the arguments, and don't come back */
mov x0, x2
mov x1, x3
mov x2, x4
b reset
1: cmp x0, #HVC_RESET_VECTORS
b.ne 1f
reset:
/*
* Reset kvm back to the hyp stub. Do not clobber x0-x4 in
* case we coming via HVC_SOFT_RESTART.
*/
mrs x5, sctlr_el2
ldr x6, =SCTLR_ELx_FLAGS
bic x5, x5, x6 // Clear SCTL_M and etc
pre_disable_mmu_workaround
msr sctlr_el2, x5
isb
/* Install stub vectors */
adr_l x5, __hyp_stub_vectors
msr vbar_el2, x5
mov x0, xzr
eret
1: /* Bad stub call */
ldr x0, =HVC_STUB_ERR
eret
ENDPROC(__kvm_handle_stub_hvc)
.ltorg
.popsection