| menuconfig IEEE802154_DRIVERS |
| tristate "IEEE 802.15.4 drivers" |
| depends on NETDEVICES && IEEE802154 |
| default y |
| ---help--- |
| Say Y here to get to see options for IEEE 802.15.4 Low-Rate |
| Wireless Personal Area Network device drivers. This option alone |
| does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and |
| disabled. |
| |
| config IEEE802154_FAKELB |
| depends on IEEE802154_DRIVERS && MAC802154 |
| tristate "IEEE 802.15.4 loopback driver" |
| ---help--- |
| Say Y here to enable the fake driver that can emulate a net |
| of several interconnected radio devices. |
| |
| This driver can also be built as a module. To do so say M here. |
| The module will be called 'fakelb'. |
| |
| config IEEE802154_AT86RF230 |
| depends on IEEE802154_DRIVERS && MAC802154 |
| tristate "AT86RF230/231/233/212 transceiver driver" |
| depends on SPI |
| select REGMAP_SPI |
| ---help--- |
| Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so, say M here. |
| the module will be called 'at86rf230'. |
| |
| config IEEE802154_AT86RF230_DEBUGFS |
| depends on IEEE802154_AT86RF230 |
| bool "AT86RF230 debugfs interface" |
| depends on DEBUG_FS |
| ---help--- |
| This option compiles debugfs code for the at86rf230 driver. |
| |
| config IEEE802154_MRF24J40 |
| tristate "Microchip MRF24J40 transceiver driver" |
| depends on IEEE802154_DRIVERS && MAC802154 |
| depends on SPI |
| select REGMAP_SPI |
| ---help--- |
| Say Y here to enable the MRF24J20 SPI 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so, say M here. |
| the module will be called 'mrf24j40'. |
| |
| config IEEE802154_CC2520 |
| depends on IEEE802154_DRIVERS && MAC802154 |
| tristate "CC2520 transceiver driver" |
| depends on SPI |
| ---help--- |
| Say Y here to enable the CC2520 SPI 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so, say M here. |
| the module will be called 'cc2520'. |
| |
| config IEEE802154_ATUSB |
| tristate "ATUSB transceiver driver" |
| depends on IEEE802154_DRIVERS && MAC802154 && USB |
| ---help--- |
| Say Y here to enable the ATUSB IEEE 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so say M here. |
| The module will be called 'atusb'. |
| |
| config IEEE802154_ADF7242 |
| tristate "ADF7242 transceiver driver" |
| depends on IEEE802154_DRIVERS && MAC802154 |
| depends on SPI |
| ---help--- |
| Say Y here to enable the ADF7242 SPI 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so, say M here. |
| the module will be called 'adf7242'. |
| |
| config IEEE802154_CA8210 |
| tristate "Cascoda CA8210 transceiver driver" |
| depends on IEEE802154_DRIVERS && MAC802154 |
| depends on COMMON_CLK |
| depends on SPI |
| ---help--- |
| Say Y here to enable the CA8210 SPI 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so, say M here. |
| the module will be called 'ca8210'. |
| |
| config IEEE802154_CA8210_DEBUGFS |
| bool "CA8210 debugfs interface" |
| depends on IEEE802154_CA8210 |
| depends on DEBUG_FS |
| ---help--- |
| This option compiles debugfs code for the ca8210 driver. This |
| exposes a debugfs node for each CA8210 instance which allows |
| direct use of the Cascoda API, exposing the 802.15.4 MAC |
| management entities. |
| |
| config IEEE802154_MCR20A |
| tristate "MCR20A transceiver driver" |
| depends on IEEE802154_DRIVERS && MAC802154 |
| depends on SPI |
| ---help--- |
| Say Y here to enable the MCR20A SPI 802.15.4 wireless |
| controller. |
| |
| This driver can also be built as a module. To do so, say M here. |
| the module will be called 'mcr20a'. |