| /* | |
| * v4l2-mc.h - Media Controller V4L2 types and prototypes | |
| * | |
| * Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@kernel.org> | |
| * Copyright (C) 2006-2010 Nokia Corporation | |
| * Copyright (c) 2016 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #ifndef _V4L2_MC_H | |
| #define _V4L2_MC_H | |
| #include <media/media-device.h> | |
| #include <media/v4l2-dev.h> | |
| #include <linux/types.h> | |
| /** | |
| * enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER | |
| * | |
| * @TUNER_PAD_RF_INPUT: Radiofrequency (RF) sink pad, usually linked to a | |
| * RF connector entity. | |
| * @TUNER_PAD_OUTPUT: Tuner video output source pad. Contains the video | |
| * chrominance and luminance or the hole bandwidth | |
| * of the signal converted to an Intermediate Frequency | |
| * (IF) or to baseband (on zero-IF tuners). | |
| * @TUNER_PAD_AUD_OUT: Tuner audio output source pad. Tuners used to decode | |
| * analog TV signals have an extra pad for audio output. | |
| * Old tuners use an analog stage with a saw filter for | |
| * the audio IF frequency. The output of the pad is, in | |
| * this case, the audio IF, with should be decoded either | |
| * by the bridge chipset (that's the case of cx2388x | |
| * chipsets) or may require an external IF sound | |
| * processor, like msp34xx. On modern silicon tuners, | |
| * the audio IF decoder is usually incorporated at the | |
| * tuner. On such case, the output of this pad is an | |
| * audio sampled data. | |
| * @TUNER_NUM_PADS: Number of pads of the tuner. | |
| */ | |
| enum tuner_pad_index { | |
| TUNER_PAD_RF_INPUT, | |
| TUNER_PAD_OUTPUT, | |
| TUNER_PAD_AUD_OUT, | |
| TUNER_NUM_PADS | |
| }; | |
| /** | |
| * enum if_vid_dec_pad_index - video IF-PLL pad index for | |
| * MEDIA_ENT_F_IF_VID_DECODER | |
| * | |
| * @IF_VID_DEC_PAD_IF_INPUT: video Intermediate Frequency (IF) sink pad | |
| * @IF_VID_DEC_PAD_OUT: IF-PLL video output source pad. Contains the | |
| * video chrominance and luminance IF signals. | |
| * @IF_VID_DEC_PAD_NUM_PADS: Number of pads of the video IF-PLL. | |
| */ | |
| enum if_vid_dec_pad_index { | |
| IF_VID_DEC_PAD_IF_INPUT, | |
| IF_VID_DEC_PAD_OUT, | |
| IF_VID_DEC_PAD_NUM_PADS | |
| }; | |
| /** | |
| * enum if_aud_dec_pad_index - audio/sound IF-PLL pad index for | |
| * MEDIA_ENT_F_IF_AUD_DECODER | |
| * | |
| * @IF_AUD_DEC_PAD_IF_INPUT: audio Intermediate Frequency (IF) sink pad | |
| * @IF_AUD_DEC_PAD_OUT: IF-PLL audio output source pad. Contains the | |
| * audio sampled stream data, usually connected | |
| * to the bridge bus via an Inter-IC Sound (I2S) | |
| * bus. | |
| * @IF_AUD_DEC_PAD_NUM_PADS: Number of pads of the audio IF-PLL. | |
| */ | |
| enum if_aud_dec_pad_index { | |
| IF_AUD_DEC_PAD_IF_INPUT, | |
| IF_AUD_DEC_PAD_OUT, | |
| IF_AUD_DEC_PAD_NUM_PADS | |
| }; | |
| /** | |
| * enum demod_pad_index - analog TV pad index for MEDIA_ENT_F_ATV_DECODER | |
| * | |
| * @DEMOD_PAD_IF_INPUT: IF input sink pad. | |
| * @DEMOD_PAD_VID_OUT: Video output source pad. | |
| * @DEMOD_PAD_VBI_OUT: Vertical Blank Interface (VBI) output source pad. | |
| * @DEMOD_PAD_AUDIO_OUT: Audio output source pad. | |
| * @DEMOD_NUM_PADS: Maximum number of output pads. | |
| */ | |
| enum demod_pad_index { | |
| DEMOD_PAD_IF_INPUT, | |
| DEMOD_PAD_VID_OUT, | |
| DEMOD_PAD_VBI_OUT, | |
| DEMOD_PAD_AUDIO_OUT, | |
| DEMOD_NUM_PADS | |
| }; | |
| /* We don't need to include pci.h or usb.h here */ | |
| struct pci_dev; | |
| struct usb_device; | |
| #ifdef CONFIG_MEDIA_CONTROLLER | |
| /** | |
| * v4l2_mc_create_media_graph() - create Media Controller links at the graph. | |
| * | |
| * @mdev: pointer to the &media_device struct. | |
| * | |
| * Add links between the entities commonly found on PC customer's hardware at | |
| * the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners, | |
| * analog TV decoder and I/O entities (video, VBI and Software Defined Radio). | |
| * | |
| * .. note:: | |
| * | |
| * Webcams are modelled on a very simple way: the sensor is | |
| * connected directly to the I/O entity. All dirty details, like | |
| * scaler and crop HW are hidden. While such mapping is enough for v4l2 | |
| * interface centric PC-consumer's hardware, V4L2 subdev centric camera | |
| * hardware should not use this routine, as it will not build the right graph. | |
| */ | |
| int v4l2_mc_create_media_graph(struct media_device *mdev); | |
| /** | |
| * v4l_enable_media_source() - Hold media source for exclusive use | |
| * if free | |
| * | |
| * @vdev: pointer to struct video_device | |
| * | |
| * This interface calls enable_source handler to determine if | |
| * media source is free for use. The enable_source handler is | |
| * responsible for checking is the media source is free and | |
| * start a pipeline between the media source and the media | |
| * entity associated with the video device. This interface | |
| * should be called from v4l2-core and dvb-core interfaces | |
| * that change the source configuration. | |
| * | |
| * Return: returns zero on success or a negative error code. | |
| */ | |
| int v4l_enable_media_source(struct video_device *vdev); | |
| /** | |
| * v4l_disable_media_source() - Release media source | |
| * | |
| * @vdev: pointer to struct video_device | |
| * | |
| * This interface calls disable_source handler to release | |
| * the media source. The disable_source handler stops the | |
| * active media pipeline between the media source and the | |
| * media entity associated with the video device. | |
| * | |
| * Return: returns zero on success or a negative error code. | |
| */ | |
| void v4l_disable_media_source(struct video_device *vdev); | |
| /* | |
| * v4l_vb2q_enable_media_tuner - Hold media source for exclusive use | |
| * if free. | |
| * @q - pointer to struct vb2_queue | |
| * | |
| * Wrapper for v4l_enable_media_source(). This function should | |
| * be called from v4l2-core to enable the media source with | |
| * pointer to struct vb2_queue as the input argument. Some | |
| * v4l2-core interfaces don't have access to video device and | |
| * this interface finds the struct video_device for the q and | |
| * calls v4l_enable_media_source(). | |
| */ | |
| int v4l_vb2q_enable_media_source(struct vb2_queue *q); | |
| /** | |
| * v4l2_pipeline_pm_use - Update the use count of an entity | |
| * @entity: The entity | |
| * @use: Use (1) or stop using (0) the entity | |
| * | |
| * Update the use count of all entities in the pipeline and power entities on or | |
| * off accordingly. | |
| * | |
| * This function is intended to be called in video node open (use == | |
| * 1) and release (use == 0). It uses struct media_entity.use_count to | |
| * track the power status. The use of this function should be paired | |
| * with v4l2_pipeline_link_notify(). | |
| * | |
| * Return 0 on success or a negative error code on failure. Powering entities | |
| * off is assumed to never fail. No failure can occur when the use parameter is | |
| * set to 0. | |
| */ | |
| int v4l2_pipeline_pm_use(struct media_entity *entity, int use); | |
| /** | |
| * v4l2_pipeline_link_notify - Link management notification callback | |
| * @link: The link | |
| * @flags: New link flags that will be applied | |
| * @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*) | |
| * | |
| * React to link management on powered pipelines by updating the use count of | |
| * all entities in the source and sink sides of the link. Entities are powered | |
| * on or off accordingly. The use of this function should be paired | |
| * with v4l2_pipeline_pm_use(). | |
| * | |
| * Return 0 on success or a negative error code on failure. Powering entities | |
| * off is assumed to never fail. This function will not fail for disconnection | |
| * events. | |
| */ | |
| int v4l2_pipeline_link_notify(struct media_link *link, u32 flags, | |
| unsigned int notification); | |
| #else /* CONFIG_MEDIA_CONTROLLER */ | |
| static inline int v4l2_mc_create_media_graph(struct media_device *mdev) | |
| { | |
| return 0; | |
| } | |
| static inline int v4l_enable_media_source(struct video_device *vdev) | |
| { | |
| return 0; | |
| } | |
| static inline void v4l_disable_media_source(struct video_device *vdev) | |
| { | |
| } | |
| static inline int v4l_vb2q_enable_media_source(struct vb2_queue *q) | |
| { | |
| return 0; | |
| } | |
| static inline int v4l2_pipeline_pm_use(struct media_entity *entity, int use) | |
| { | |
| return 0; | |
| } | |
| static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags, | |
| unsigned int notification) | |
| { | |
| return 0; | |
| } | |
| #endif /* CONFIG_MEDIA_CONTROLLER */ | |
| #endif /* _V4L2_MC_H */ |