|  | /* | 
|  | * mmconfig.c - Low-level direct PCI config space access via MMCONFIG | 
|  | * | 
|  | * This is an 64bit optimized version that always keeps the full mmconfig | 
|  | * space mapped. This allows lockless config space operation. | 
|  | */ | 
|  |  | 
|  | #include <linux/pci.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/bitmap.h> | 
|  | #include <asm/e820.h> | 
|  | #include <asm/pci_x86.h> | 
|  |  | 
|  | /* Static virtual mapping of the MMCONFIG aperture */ | 
|  | struct mmcfg_virt { | 
|  | struct acpi_mcfg_allocation *cfg; | 
|  | char __iomem *virt; | 
|  | }; | 
|  | static struct mmcfg_virt *pci_mmcfg_virt; | 
|  |  | 
|  | static char __iomem *get_virt(unsigned int seg, unsigned bus) | 
|  | { | 
|  | struct acpi_mcfg_allocation *cfg; | 
|  | int cfg_num; | 
|  |  | 
|  | for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { | 
|  | cfg = pci_mmcfg_virt[cfg_num].cfg; | 
|  | if (cfg->pci_segment == seg && | 
|  | (cfg->start_bus_number <= bus) && | 
|  | (cfg->end_bus_number >= bus)) | 
|  | return pci_mmcfg_virt[cfg_num].virt; | 
|  | } | 
|  |  | 
|  | /* Fall back to type 0 */ | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) | 
|  | { | 
|  | char __iomem *addr; | 
|  |  | 
|  | addr = get_virt(seg, bus); | 
|  | if (!addr) | 
|  | return NULL; | 
|  | return addr + ((bus << 20) | (devfn << 12)); | 
|  | } | 
|  |  | 
|  | static int pci_mmcfg_read(unsigned int seg, unsigned int bus, | 
|  | unsigned int devfn, int reg, int len, u32 *value) | 
|  | { | 
|  | char __iomem *addr; | 
|  |  | 
|  | /* Why do we have this when nobody checks it. How about a BUG()!? -AK */ | 
|  | if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) { | 
|  | err:		*value = -1; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | addr = pci_dev_base(seg, bus, devfn); | 
|  | if (!addr) | 
|  | goto err; | 
|  |  | 
|  | switch (len) { | 
|  | case 1: | 
|  | *value = mmio_config_readb(addr + reg); | 
|  | break; | 
|  | case 2: | 
|  | *value = mmio_config_readw(addr + reg); | 
|  | break; | 
|  | case 4: | 
|  | *value = mmio_config_readl(addr + reg); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_mmcfg_write(unsigned int seg, unsigned int bus, | 
|  | unsigned int devfn, int reg, int len, u32 value) | 
|  | { | 
|  | char __iomem *addr; | 
|  |  | 
|  | /* Why do we have this when nobody checks it. How about a BUG()!? -AK */ | 
|  | if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) | 
|  | return -EINVAL; | 
|  |  | 
|  | addr = pci_dev_base(seg, bus, devfn); | 
|  | if (!addr) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (len) { | 
|  | case 1: | 
|  | mmio_config_writeb(addr + reg, value); | 
|  | break; | 
|  | case 2: | 
|  | mmio_config_writew(addr + reg, value); | 
|  | break; | 
|  | case 4: | 
|  | mmio_config_writel(addr + reg, value); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct pci_raw_ops pci_mmcfg = { | 
|  | .read =		pci_mmcfg_read, | 
|  | .write =	pci_mmcfg_write, | 
|  | }; | 
|  |  | 
|  | static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) | 
|  | { | 
|  | void __iomem *addr; | 
|  | u64 start, size; | 
|  |  | 
|  | start = cfg->start_bus_number; | 
|  | start <<= 20; | 
|  | start += cfg->address; | 
|  | size = cfg->end_bus_number + 1 - cfg->start_bus_number; | 
|  | size <<= 20; | 
|  | addr = ioremap_nocache(start, size); | 
|  | if (addr) { | 
|  | printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", | 
|  | start, start + size - 1); | 
|  | addr -= cfg->start_bus_number << 20; | 
|  | } | 
|  | return addr; | 
|  | } | 
|  |  | 
|  | int __init pci_mmcfg_arch_init(void) | 
|  | { | 
|  | int i; | 
|  | pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) * | 
|  | pci_mmcfg_config_num, GFP_KERNEL); | 
|  | if (pci_mmcfg_virt == NULL) { | 
|  | printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < pci_mmcfg_config_num; ++i) { | 
|  | pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; | 
|  | pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); | 
|  | if (!pci_mmcfg_virt[i].virt) { | 
|  | printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " | 
|  | "segment %d\n", | 
|  | pci_mmcfg_config[i].pci_segment); | 
|  | pci_mmcfg_arch_free(); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | raw_pci_ext_ops = &pci_mmcfg; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | void __init pci_mmcfg_arch_free(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (pci_mmcfg_virt == NULL) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < pci_mmcfg_config_num; ++i) { | 
|  | if (pci_mmcfg_virt[i].virt) { | 
|  | iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20)); | 
|  | pci_mmcfg_virt[i].virt = NULL; | 
|  | pci_mmcfg_virt[i].cfg = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree(pci_mmcfg_virt); | 
|  | pci_mmcfg_virt = NULL; | 
|  | } |