|  | /* | 
|  | * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no> | 
|  | * | 
|  | * The probing code is heavily inspired by cdc_ether, which is: | 
|  | * Copyright (C) 2003-2005 by David Brownell | 
|  | * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync) | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/cdc.h> | 
|  | #include <linux/usb/usbnet.h> | 
|  | #include <linux/usb/cdc-wdm.h> | 
|  |  | 
|  | /* This driver supports wwan (3G/LTE/?) devices using a vendor | 
|  | * specific management protocol called Qualcomm MSM Interface (QMI) - | 
|  | * in addition to the more common AT commands over serial interface | 
|  | * management | 
|  | * | 
|  | * QMI is wrapped in CDC, using CDC encapsulated commands on the | 
|  | * control ("master") interface of a two-interface CDC Union | 
|  | * resembling standard CDC ECM.  The devices do not use the control | 
|  | * interface for any other CDC messages.  Most likely because the | 
|  | * management protocol is used in place of the standard CDC | 
|  | * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE | 
|  | * | 
|  | * Alternatively, control and data functions can be combined in a | 
|  | * single USB interface. | 
|  | * | 
|  | * Handling a protocol like QMI is out of the scope for any driver. | 
|  | * It is exported as a character device using the cdc-wdm driver as | 
|  | * a subdriver, enabling userspace applications ("modem managers") to | 
|  | * handle it. | 
|  | * | 
|  | * These devices may alternatively/additionally be configured using AT | 
|  | * commands on a serial interface | 
|  | */ | 
|  |  | 
|  | /* driver specific data */ | 
|  | struct qmi_wwan_state { | 
|  | struct usb_driver *subdriver; | 
|  | atomic_t pmcount; | 
|  | unsigned long unused; | 
|  | struct usb_interface *control; | 
|  | struct usb_interface *data; | 
|  | }; | 
|  |  | 
|  | /* default ethernet address used by the modem */ | 
|  | static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3}; | 
|  |  | 
|  | /* Make up an ethernet header if the packet doesn't have one. | 
|  | * | 
|  | * A firmware bug common among several devices cause them to send raw | 
|  | * IP packets under some circumstances.  There is no way for the | 
|  | * driver/host to know when this will happen.  And even when the bug | 
|  | * hits, some packets will still arrive with an intact header. | 
|  | * | 
|  | * The supported devices are only capably of sending IPv4, IPv6 and | 
|  | * ARP packets on a point-to-point link. Any packet with an ethernet | 
|  | * header will have either our address or a broadcast/multicast | 
|  | * address as destination.  ARP packets will always have a header. | 
|  | * | 
|  | * This means that this function will reliably add the appropriate | 
|  | * header iff necessary, provided our hardware address does not start | 
|  | * with 4 or 6. | 
|  | * | 
|  | * Another common firmware bug results in all packets being addressed | 
|  | * to 00:a0:c6:00:00:00 despite the host address being different. | 
|  | * This function will also fixup such packets. | 
|  | */ | 
|  | static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | 
|  | { | 
|  | __be16 proto; | 
|  |  | 
|  | /* usbnet rx_complete guarantees that skb->len is at least | 
|  | * hard_header_len, so we can inspect the dest address without | 
|  | * checking skb->len | 
|  | */ | 
|  | switch (skb->data[0] & 0xf0) { | 
|  | case 0x40: | 
|  | proto = htons(ETH_P_IP); | 
|  | break; | 
|  | case 0x60: | 
|  | proto = htons(ETH_P_IPV6); | 
|  | break; | 
|  | case 0x00: | 
|  | if (is_multicast_ether_addr(skb->data)) | 
|  | return 1; | 
|  | /* possibly bogus destination - rewrite just in case */ | 
|  | skb_reset_mac_header(skb); | 
|  | goto fix_dest; | 
|  | default: | 
|  | /* pass along other packets without modifications */ | 
|  | return 1; | 
|  | } | 
|  | if (skb_headroom(skb) < ETH_HLEN) | 
|  | return 0; | 
|  | skb_push(skb, ETH_HLEN); | 
|  | skb_reset_mac_header(skb); | 
|  | eth_hdr(skb)->h_proto = proto; | 
|  | memset(eth_hdr(skb)->h_source, 0, ETH_ALEN); | 
|  | fix_dest: | 
|  | memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* very simplistic detection of IPv4 or IPv6 headers */ | 
|  | static bool possibly_iphdr(const char *data) | 
|  | { | 
|  | return (data[0] & 0xd0) == 0x40; | 
|  | } | 
|  |  | 
|  | /* disallow addresses which may be confused with IP headers */ | 
|  | static int qmi_wwan_mac_addr(struct net_device *dev, void *p) | 
|  | { | 
|  | int ret; | 
|  | struct sockaddr *addr = p; | 
|  |  | 
|  | ret = eth_prepare_mac_addr_change(dev, p); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (possibly_iphdr(addr->sa_data)) | 
|  | return -EADDRNOTAVAIL; | 
|  | eth_commit_mac_addr_change(dev, p); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops qmi_wwan_netdev_ops = { | 
|  | .ndo_open		= usbnet_open, | 
|  | .ndo_stop		= usbnet_stop, | 
|  | .ndo_start_xmit		= usbnet_start_xmit, | 
|  | .ndo_tx_timeout		= usbnet_tx_timeout, | 
|  | .ndo_change_mtu		= usbnet_change_mtu, | 
|  | .ndo_set_mac_address	= qmi_wwan_mac_addr, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | }; | 
|  |  | 
|  | /* using a counter to merge subdriver requests with our own into a | 
|  | * combined state | 
|  | */ | 
|  | static int qmi_wwan_manage_power(struct usbnet *dev, int on) | 
|  | { | 
|  | struct qmi_wwan_state *info = (void *)&dev->data; | 
|  | int rv; | 
|  |  | 
|  | dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, | 
|  | atomic_read(&info->pmcount), on); | 
|  |  | 
|  | if ((on && atomic_add_return(1, &info->pmcount) == 1) || | 
|  | (!on && atomic_dec_and_test(&info->pmcount))) { | 
|  | /* need autopm_get/put here to ensure the usbcore sees | 
|  | * the new value | 
|  | */ | 
|  | rv = usb_autopm_get_interface(dev->intf); | 
|  | dev->intf->needs_remote_wakeup = on; | 
|  | if (!rv) | 
|  | usb_autopm_put_interface(dev->intf); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on) | 
|  | { | 
|  | struct usbnet *dev = usb_get_intfdata(intf); | 
|  |  | 
|  | /* can be called while disconnecting */ | 
|  | if (!dev) | 
|  | return 0; | 
|  | return qmi_wwan_manage_power(dev, on); | 
|  | } | 
|  |  | 
|  | /* collect all three endpoints and register subdriver */ | 
|  | static int qmi_wwan_register_subdriver(struct usbnet *dev) | 
|  | { | 
|  | int rv; | 
|  | struct usb_driver *subdriver = NULL; | 
|  | struct qmi_wwan_state *info = (void *)&dev->data; | 
|  |  | 
|  | /* collect bulk endpoints */ | 
|  | rv = usbnet_get_endpoints(dev, info->data); | 
|  | if (rv < 0) | 
|  | goto err; | 
|  |  | 
|  | /* update status endpoint if separate control interface */ | 
|  | if (info->control != info->data) | 
|  | dev->status = &info->control->cur_altsetting->endpoint[0]; | 
|  |  | 
|  | /* require interrupt endpoint for subdriver */ | 
|  | if (!dev->status) { | 
|  | rv = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* for subdriver power management */ | 
|  | atomic_set(&info->pmcount, 0); | 
|  |  | 
|  | /* register subdriver */ | 
|  | subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc, | 
|  | 4096, &qmi_wwan_cdc_wdm_manage_power); | 
|  | if (IS_ERR(subdriver)) { | 
|  | dev_err(&info->control->dev, "subdriver registration failed\n"); | 
|  | rv = PTR_ERR(subdriver); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* prevent usbnet from using status endpoint */ | 
|  | dev->status = NULL; | 
|  |  | 
|  | /* save subdriver struct for suspend/resume wrappers */ | 
|  | info->subdriver = subdriver; | 
|  |  | 
|  | err: | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf) | 
|  | { | 
|  | int status = -1; | 
|  | u8 *buf = intf->cur_altsetting->extra; | 
|  | int len = intf->cur_altsetting->extralen; | 
|  | struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc; | 
|  | struct usb_cdc_union_desc *cdc_union = NULL; | 
|  | struct usb_cdc_ether_desc *cdc_ether = NULL; | 
|  | u32 found = 0; | 
|  | struct usb_driver *driver = driver_of(intf); | 
|  | struct qmi_wwan_state *info = (void *)&dev->data; | 
|  |  | 
|  | BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < | 
|  | sizeof(struct qmi_wwan_state))); | 
|  |  | 
|  | /* set up initial state */ | 
|  | info->control = intf; | 
|  | info->data = intf; | 
|  |  | 
|  | /* and a number of CDC descriptors */ | 
|  | while (len > 3) { | 
|  | struct usb_descriptor_header *h = (void *)buf; | 
|  |  | 
|  | /* ignore any misplaced descriptors */ | 
|  | if (h->bDescriptorType != USB_DT_CS_INTERFACE) | 
|  | goto next_desc; | 
|  |  | 
|  | /* buf[2] is CDC descriptor subtype */ | 
|  | switch (buf[2]) { | 
|  | case USB_CDC_HEADER_TYPE: | 
|  | if (found & 1 << USB_CDC_HEADER_TYPE) { | 
|  | dev_dbg(&intf->dev, "extra CDC header\n"); | 
|  | goto err; | 
|  | } | 
|  | if (h->bLength != sizeof(struct usb_cdc_header_desc)) { | 
|  | dev_dbg(&intf->dev, "CDC header len %u\n", | 
|  | h->bLength); | 
|  | goto err; | 
|  | } | 
|  | break; | 
|  | case USB_CDC_UNION_TYPE: | 
|  | if (found & 1 << USB_CDC_UNION_TYPE) { | 
|  | dev_dbg(&intf->dev, "extra CDC union\n"); | 
|  | goto err; | 
|  | } | 
|  | if (h->bLength != sizeof(struct usb_cdc_union_desc)) { | 
|  | dev_dbg(&intf->dev, "CDC union len %u\n", | 
|  | h->bLength); | 
|  | goto err; | 
|  | } | 
|  | cdc_union = (struct usb_cdc_union_desc *)buf; | 
|  | break; | 
|  | case USB_CDC_ETHERNET_TYPE: | 
|  | if (found & 1 << USB_CDC_ETHERNET_TYPE) { | 
|  | dev_dbg(&intf->dev, "extra CDC ether\n"); | 
|  | goto err; | 
|  | } | 
|  | if (h->bLength != sizeof(struct usb_cdc_ether_desc)) { | 
|  | dev_dbg(&intf->dev, "CDC ether len %u\n", | 
|  | h->bLength); | 
|  | goto err; | 
|  | } | 
|  | cdc_ether = (struct usb_cdc_ether_desc *)buf; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Remember which CDC functional descriptors we've seen.  Works | 
|  | * for all types we care about, of which USB_CDC_ETHERNET_TYPE | 
|  | * (0x0f) is the highest numbered | 
|  | */ | 
|  | if (buf[2] < 32) | 
|  | found |= 1 << buf[2]; | 
|  |  | 
|  | next_desc: | 
|  | len -= h->bLength; | 
|  | buf += h->bLength; | 
|  | } | 
|  |  | 
|  | /* Use separate control and data interfaces if we found a CDC Union */ | 
|  | if (cdc_union) { | 
|  | info->data = usb_ifnum_to_if(dev->udev, | 
|  | cdc_union->bSlaveInterface0); | 
|  | if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 || | 
|  | !info->data) { | 
|  | dev_err(&intf->dev, | 
|  | "bogus CDC Union: master=%u, slave=%u\n", | 
|  | cdc_union->bMasterInterface0, | 
|  | cdc_union->bSlaveInterface0); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* errors aren't fatal - we can live with the dynamic address */ | 
|  | if (cdc_ether) { | 
|  | dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize); | 
|  | usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress); | 
|  | } | 
|  |  | 
|  | /* claim data interface and set it up */ | 
|  | if (info->control != info->data) { | 
|  | status = usb_driver_claim_interface(driver, info->data, dev); | 
|  | if (status < 0) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | status = qmi_wwan_register_subdriver(dev); | 
|  | if (status < 0 && info->control != info->data) { | 
|  | usb_set_intfdata(info->data, NULL); | 
|  | usb_driver_release_interface(driver, info->data); | 
|  | } | 
|  |  | 
|  | /* Never use the same address on both ends of the link, even | 
|  | * if the buggy firmware told us to. | 
|  | */ | 
|  | if (ether_addr_equal(dev->net->dev_addr, default_modem_addr)) | 
|  | eth_hw_addr_random(dev->net); | 
|  |  | 
|  | /* make MAC addr easily distinguishable from an IP header */ | 
|  | if (possibly_iphdr(dev->net->dev_addr)) { | 
|  | dev->net->dev_addr[0] |= 0x02;	/* set local assignment bit */ | 
|  | dev->net->dev_addr[0] &= 0xbf;	/* clear "IP" bit */ | 
|  | } | 
|  | dev->net->netdev_ops = &qmi_wwan_netdev_ops; | 
|  | err: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf) | 
|  | { | 
|  | struct qmi_wwan_state *info = (void *)&dev->data; | 
|  | struct usb_driver *driver = driver_of(intf); | 
|  | struct usb_interface *other; | 
|  |  | 
|  | if (info->subdriver && info->subdriver->disconnect) | 
|  | info->subdriver->disconnect(info->control); | 
|  |  | 
|  | /* allow user to unbind using either control or data */ | 
|  | if (intf == info->control) | 
|  | other = info->data; | 
|  | else | 
|  | other = info->control; | 
|  |  | 
|  | /* only if not shared */ | 
|  | if (other && intf != other) { | 
|  | usb_set_intfdata(other, NULL); | 
|  | usb_driver_release_interface(driver, other); | 
|  | } | 
|  |  | 
|  | info->subdriver = NULL; | 
|  | info->data = NULL; | 
|  | info->control = NULL; | 
|  | } | 
|  |  | 
|  | /* suspend/resume wrappers calling both usbnet and the cdc-wdm | 
|  | * subdriver if present. | 
|  | * | 
|  | * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide | 
|  | * wrappers for those without adding usbnet reset support first. | 
|  | */ | 
|  | static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) | 
|  | { | 
|  | struct usbnet *dev = usb_get_intfdata(intf); | 
|  | struct qmi_wwan_state *info = (void *)&dev->data; | 
|  | int ret; | 
|  |  | 
|  | /* Both usbnet_suspend() and subdriver->suspend() MUST return 0 | 
|  | * in system sleep context, otherwise, the resume callback has | 
|  | * to recover device from previous suspend failure. | 
|  | */ | 
|  | ret = usbnet_suspend(intf, message); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | if (intf == info->control && info->subdriver && | 
|  | info->subdriver->suspend) | 
|  | ret = info->subdriver->suspend(intf, message); | 
|  | if (ret < 0) | 
|  | usbnet_resume(intf); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qmi_wwan_resume(struct usb_interface *intf) | 
|  | { | 
|  | struct usbnet *dev = usb_get_intfdata(intf); | 
|  | struct qmi_wwan_state *info = (void *)&dev->data; | 
|  | int ret = 0; | 
|  | bool callsub = (intf == info->control && info->subdriver && | 
|  | info->subdriver->resume); | 
|  |  | 
|  | if (callsub) | 
|  | ret = info->subdriver->resume(intf); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  | ret = usbnet_resume(intf); | 
|  | if (ret < 0 && callsub) | 
|  | info->subdriver->suspend(intf, PMSG_SUSPEND); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct driver_info	qmi_wwan_info = { | 
|  | .description	= "WWAN/QMI device", | 
|  | .flags		= FLAG_WWAN, | 
|  | .bind		= qmi_wwan_bind, | 
|  | .unbind		= qmi_wwan_unbind, | 
|  | .manage_power	= qmi_wwan_manage_power, | 
|  | .rx_fixup       = qmi_wwan_rx_fixup, | 
|  | }; | 
|  |  | 
|  | #define HUAWEI_VENDOR_ID	0x12D1 | 
|  |  | 
|  | /* map QMI/wwan function by a fixed interface number */ | 
|  | #define QMI_FIXED_INTF(vend, prod, num) \ | 
|  | USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \ | 
|  | .driver_info = (unsigned long)&qmi_wwan_info | 
|  |  | 
|  | /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ | 
|  | #define QMI_GOBI1K_DEVICE(vend, prod) \ | 
|  | QMI_FIXED_INTF(vend, prod, 3) | 
|  |  | 
|  | /* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */ | 
|  | #define QMI_GOBI_DEVICE(vend, prod) \ | 
|  | QMI_FIXED_INTF(vend, prod, 0) | 
|  |  | 
|  | static const struct usb_device_id products[] = { | 
|  | /* 1. CDC ECM like devices match on the control interface */ | 
|  | {	/* Huawei E392, E398 and possibly others sharing both device id and more... */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  |  | 
|  | /* 2. Combined interface devices matching on class+protocol */ | 
|  | {	/* Huawei E367 and possibly others in "Windows mode" */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Huawei E392, E398 and possibly others in "Windows mode" */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Pantech UML290, P4200 and more */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Pantech UML290 - newer firmware */ | 
|  | USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Novatel USB551L and MC551 */ | 
|  | USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001, | 
|  | USB_CLASS_COMM, | 
|  | USB_CDC_SUBCLASS_ETHERNET, | 
|  | USB_CDC_PROTO_NONE), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Novatel E362 */ | 
|  | USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010, | 
|  | USB_CLASS_COMM, | 
|  | USB_CDC_SUBCLASS_ETHERNET, | 
|  | USB_CDC_PROTO_NONE), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Dell Wireless 5800 (Novatel E362) */ | 
|  | USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195, | 
|  | USB_CLASS_COMM, | 
|  | USB_CDC_SUBCLASS_ETHERNET, | 
|  | USB_CDC_PROTO_NONE), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Dell Wireless 5800 V2 (Novatel E362) */ | 
|  | USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196, | 
|  | USB_CLASS_COMM, | 
|  | USB_CDC_SUBCLASS_ETHERNET, | 
|  | USB_CDC_PROTO_NONE), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* Dell Wireless 5804 (Novatel E371) */ | 
|  | USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b, | 
|  | USB_CLASS_COMM, | 
|  | USB_CDC_SUBCLASS_ETHERNET, | 
|  | USB_CDC_PROTO_NONE), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  | {	/* ADU960S */ | 
|  | USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, | 
|  | USB_CLASS_COMM, | 
|  | USB_CDC_SUBCLASS_ETHERNET, | 
|  | USB_CDC_PROTO_NONE), | 
|  | .driver_info        = (unsigned long)&qmi_wwan_info, | 
|  | }, | 
|  |  | 
|  | /* 3. Combined interface devices matching on interface number */ | 
|  | {QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */ | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7000, 0)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7001, 1)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7002, 1)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7101, 1)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7101, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7101, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7102, 1)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7102, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x7102, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x8000, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x8001, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9000, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9003, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9005, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900a, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900b, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900c, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900c, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900c, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900d, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900f, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900f, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x900f, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9010, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9010, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9011, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9011, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9021, 1)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9022, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9025, 4)},	/* Alcatel-sbell ASB TL131 TDD LTE  (China Mobile) */ | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9026, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x902e, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9031, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9032, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9033, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9033, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9033, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9033, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9034, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9034, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9034, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9034, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9034, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9035, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9036, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9037, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9038, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x903b, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x903c, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x903d, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x903e, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9043, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9046, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9046, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9046, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9047, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9047, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9047, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9048, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9048, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9048, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9048, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9048, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x904c, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x904c, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x904c, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x904c, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9050, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9052, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9053, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9053, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9054, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9054, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9055, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9055, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9055, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9055, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9055, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9056, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9062, 9)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9064, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9065, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9065, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9066, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9066, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9067, 1)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9068, 2)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9068, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9068, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9068, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9068, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9068, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9069, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9069, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9069, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9069, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9070, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9070, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9075, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9076, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9076, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9076, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9076, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9076, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9077, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9077, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9077, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9077, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9078, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9079, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9079, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9079, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9079, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9079, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9080, 5)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9080, 6)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9080, 7)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9080, 8)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9083, 3)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x9084, 4)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x920d, 0)}, | 
|  | {QMI_FIXED_INTF(0x05c6, 0x920d, 5)}, | 
|  | {QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */ | 
|  | {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},	/* Huawei E1820 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0019, 3)},	/* ONDA MT689DC */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0021, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0025, 1)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0031, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0042, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0049, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0052, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0055, 1)},	/* ZTE (Vodafone) K3520-Z */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0058, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0063, 4)},	/* ZTE (Vodafone) K3565-Z */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0104, 4)},	/* ZTE (Vodafone) K4505-Z */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0113, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0118, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0121, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0123, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0124, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0125, 6)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0126, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0130, 1)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0133, 3)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0141, 5)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0157, 5)},	/* ZTE MF683 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0158, 3)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0167, 4)},	/* ZTE MF820D */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0191, 4)},	/* ZTE EuFi890 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0199, 1)},	/* ZTE MF820S */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0200, 1)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0257, 3)},	/* ZTE MF821 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0265, 4)},	/* ONDA MT8205 4G LTE */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0284, 4)},	/* ZTE MF880 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0326, 4)},	/* ZTE MF821D */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x0412, 4)},	/* Telewell TW-LTE 4G */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1008, 4)},	/* ZTE (Vodafone) K3570-Z */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1010, 4)},	/* ZTE (Vodafone) K3571-Z */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1012, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1018, 3)},	/* ZTE (Vodafone) K5006-Z */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1021, 2)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1245, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1247, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1252, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1254, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1402, 2)},	/* ZTE MF60 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1425, 2)}, | 
|  | {QMI_FIXED_INTF(0x19d2, 0x1426, 2)},	/* ZTE MF91 */ | 
|  | {QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */ | 
|  | {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */ | 
|  | {QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */ | 
|  | {QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */ | 
|  | {QMI_FIXED_INTF(0x1199, 0x68a2, 19)},	/* Sierra Wireless MC7710 in QMI mode */ | 
|  | {QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */ | 
|  | {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},	/* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ | 
|  | {QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */ | 
|  | {QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */ | 
|  | {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */ | 
|  | {QMI_FIXED_INTF(0x1bc7, 0x1201, 2)},	/* Telit LE920 */ | 
|  | {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)},    /* Olivetti Olicard 200 */ | 
|  | {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)},	/* Cinterion PLxx */ | 
|  |  | 
|  | /* 4. Gobi 1000 devices */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */ | 
|  | {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */ | 
|  | {QMI_GOBI1K_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa001)},	/* Novatel/Verizon USB-1000 */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa002)},	/* Novatel Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa003)},	/* Novatel Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa004)},	/* Novatel Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa005)},	/* Novatel Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa006)},	/* Novatel Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x1410, 0xa007)},	/* Novatel Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */ | 
|  | {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */ | 
|  |  | 
|  | /* 5. Gobi 2000 and 3000 devices */ | 
|  | {QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */ | 
|  | {QMI_GOBI_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */ | 
|  | {QMI_GOBI_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */ | 
|  | {QMI_GOBI_DEVICE(0x0af0, 0x8120)},	/* Option GTM681W */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x68a5)},	/* Sierra Wireless Modem */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x68a9)},	/* Sierra Wireless Modem */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9011)},	/* Sierra Wireless Gobi 2000 Modem device (MC8305) */ | 
|  | {QMI_GOBI_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */ | 
|  | {QMI_GOBI_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */ | 
|  | {QMI_GOBI_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */ | 
|  | {QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */ | 
|  | {QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */ | 
|  | {QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel E396) */ | 
|  |  | 
|  | { }					/* END */ | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, products); | 
|  |  | 
|  | static int qmi_wwan_probe(struct usb_interface *intf, | 
|  | const struct usb_device_id *prod) | 
|  | { | 
|  | struct usb_device_id *id = (struct usb_device_id *)prod; | 
|  |  | 
|  | /* Workaround to enable dynamic IDs.  This disables usbnet | 
|  | * blacklisting functionality.  Which, if required, can be | 
|  | * reimplemented here by using a magic "blacklist" value | 
|  | * instead of 0 in the static device id table | 
|  | */ | 
|  | if (!id->driver_info) { | 
|  | dev_dbg(&intf->dev, "setting defaults for dynamic device id\n"); | 
|  | id->driver_info = (unsigned long)&qmi_wwan_info; | 
|  | } | 
|  |  | 
|  | return usbnet_probe(intf, id); | 
|  | } | 
|  |  | 
|  | static struct usb_driver qmi_wwan_driver = { | 
|  | .name		      = "qmi_wwan", | 
|  | .id_table	      = products, | 
|  | .probe		      = qmi_wwan_probe, | 
|  | .disconnect	      = usbnet_disconnect, | 
|  | .suspend	      = qmi_wwan_suspend, | 
|  | .resume		      =	qmi_wwan_resume, | 
|  | .reset_resume         = qmi_wwan_resume, | 
|  | .supports_autosuspend = 1, | 
|  | .disable_hub_initiated_lpm = 1, | 
|  | }; | 
|  |  | 
|  | module_usb_driver(qmi_wwan_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>"); | 
|  | MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver"); | 
|  | MODULE_LICENSE("GPL"); |