| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Driver for Alauda-based card readers | |
| * | |
| * Current development and maintenance by: | |
| * (c) 2005 Daniel Drake <dsd@gentoo.org> | |
| * | |
| * The 'Alauda' is a chip manufacturered by RATOC for OEM use. | |
| * | |
| * Alauda implements a vendor-specific command set to access two media reader | |
| * ports (XD, SmartMedia). This driver converts SCSI commands to the commands | |
| * which are accepted by these devices. | |
| * | |
| * The driver was developed through reverse-engineering, with the help of the | |
| * sddr09 driver which has many similarities, and with some help from the | |
| * (very old) vendor-supplied GPL sma03 driver. | |
| * | |
| * For protocol info, see http://alauda.sourceforge.net | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_device.h> | |
| #include "usb.h" | |
| #include "transport.h" | |
| #include "protocol.h" | |
| #include "debug.h" | |
| #include "scsiglue.h" | |
| #define DRV_NAME "ums-alauda" | |
| MODULE_DESCRIPTION("Driver for Alauda-based card readers"); | |
| MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>"); | |
| MODULE_LICENSE("GPL"); | |
| /* | |
| * Status bytes | |
| */ | |
| #define ALAUDA_STATUS_ERROR 0x01 | |
| #define ALAUDA_STATUS_READY 0x40 | |
| /* | |
| * Control opcodes (for request field) | |
| */ | |
| #define ALAUDA_GET_XD_MEDIA_STATUS 0x08 | |
| #define ALAUDA_GET_SM_MEDIA_STATUS 0x98 | |
| #define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a | |
| #define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a | |
| #define ALAUDA_GET_XD_MEDIA_SIG 0x86 | |
| #define ALAUDA_GET_SM_MEDIA_SIG 0x96 | |
| /* | |
| * Bulk command identity (byte 0) | |
| */ | |
| #define ALAUDA_BULK_CMD 0x40 | |
| /* | |
| * Bulk opcodes (byte 1) | |
| */ | |
| #define ALAUDA_BULK_GET_REDU_DATA 0x85 | |
| #define ALAUDA_BULK_READ_BLOCK 0x94 | |
| #define ALAUDA_BULK_ERASE_BLOCK 0xa3 | |
| #define ALAUDA_BULK_WRITE_BLOCK 0xb4 | |
| #define ALAUDA_BULK_GET_STATUS2 0xb7 | |
| #define ALAUDA_BULK_RESET_MEDIA 0xe0 | |
| /* | |
| * Port to operate on (byte 8) | |
| */ | |
| #define ALAUDA_PORT_XD 0x00 | |
| #define ALAUDA_PORT_SM 0x01 | |
| /* | |
| * LBA and PBA are unsigned ints. Special values. | |
| */ | |
| #define UNDEF 0xffff | |
| #define SPARE 0xfffe | |
| #define UNUSABLE 0xfffd | |
| struct alauda_media_info { | |
| unsigned long capacity; /* total media size in bytes */ | |
| unsigned int pagesize; /* page size in bytes */ | |
| unsigned int blocksize; /* number of pages per block */ | |
| unsigned int uzonesize; /* number of usable blocks per zone */ | |
| unsigned int zonesize; /* number of blocks per zone */ | |
| unsigned int blockmask; /* mask to get page from address */ | |
| unsigned char pageshift; | |
| unsigned char blockshift; | |
| unsigned char zoneshift; | |
| u16 **lba_to_pba; /* logical to physical block map */ | |
| u16 **pba_to_lba; /* physical to logical block map */ | |
| }; | |
| struct alauda_info { | |
| struct alauda_media_info port[2]; | |
| int wr_ep; /* endpoint to write data out of */ | |
| unsigned char sense_key; | |
| unsigned long sense_asc; /* additional sense code */ | |
| unsigned long sense_ascq; /* additional sense code qualifier */ | |
| }; | |
| #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) | |
| #define LSB_of(s) ((s)&0xFF) | |
| #define MSB_of(s) ((s)>>8) | |
| #define MEDIA_PORT(us) us->srb->device->lun | |
| #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)] | |
| #define PBA_LO(pba) ((pba & 0xF) << 5) | |
| #define PBA_HI(pba) (pba >> 3) | |
| #define PBA_ZONE(pba) (pba >> 11) | |
| static int init_alauda(struct us_data *us); | |
| /* | |
| * The table of devices | |
| */ | |
| #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ | |
| vendorName, productName, useProtocol, useTransport, \ | |
| initFunction, flags) \ | |
| { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ | |
| .driver_info = (flags) } | |
| static struct usb_device_id alauda_usb_ids[] = { | |
| # include "unusual_alauda.h" | |
| { } /* Terminating entry */ | |
| }; | |
| MODULE_DEVICE_TABLE(usb, alauda_usb_ids); | |
| #undef UNUSUAL_DEV | |
| /* | |
| * The flags table | |
| */ | |
| #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ | |
| vendor_name, product_name, use_protocol, use_transport, \ | |
| init_function, Flags) \ | |
| { \ | |
| .vendorName = vendor_name, \ | |
| .productName = product_name, \ | |
| .useProtocol = use_protocol, \ | |
| .useTransport = use_transport, \ | |
| .initFunction = init_function, \ | |
| } | |
| static struct us_unusual_dev alauda_unusual_dev_list[] = { | |
| # include "unusual_alauda.h" | |
| { } /* Terminating entry */ | |
| }; | |
| #undef UNUSUAL_DEV | |
| /* | |
| * Media handling | |
| */ | |
| struct alauda_card_info { | |
| unsigned char id; /* id byte */ | |
| unsigned char chipshift; /* 1<<cs bytes total capacity */ | |
| unsigned char pageshift; /* 1<<ps bytes in a page */ | |
| unsigned char blockshift; /* 1<<bs pages per block */ | |
| unsigned char zoneshift; /* 1<<zs blocks per zone */ | |
| }; | |
| static struct alauda_card_info alauda_card_ids[] = { | |
| /* NAND flash */ | |
| { 0x6e, 20, 8, 4, 8}, /* 1 MB */ | |
| { 0xe8, 20, 8, 4, 8}, /* 1 MB */ | |
| { 0xec, 20, 8, 4, 8}, /* 1 MB */ | |
| { 0x64, 21, 8, 4, 9}, /* 2 MB */ | |
| { 0xea, 21, 8, 4, 9}, /* 2 MB */ | |
| { 0x6b, 22, 9, 4, 9}, /* 4 MB */ | |
| { 0xe3, 22, 9, 4, 9}, /* 4 MB */ | |
| { 0xe5, 22, 9, 4, 9}, /* 4 MB */ | |
| { 0xe6, 23, 9, 4, 10}, /* 8 MB */ | |
| { 0x73, 24, 9, 5, 10}, /* 16 MB */ | |
| { 0x75, 25, 9, 5, 10}, /* 32 MB */ | |
| { 0x76, 26, 9, 5, 10}, /* 64 MB */ | |
| { 0x79, 27, 9, 5, 10}, /* 128 MB */ | |
| { 0x71, 28, 9, 5, 10}, /* 256 MB */ | |
| /* MASK ROM */ | |
| { 0x5d, 21, 9, 4, 8}, /* 2 MB */ | |
| { 0xd5, 22, 9, 4, 9}, /* 4 MB */ | |
| { 0xd6, 23, 9, 4, 10}, /* 8 MB */ | |
| { 0x57, 24, 9, 4, 11}, /* 16 MB */ | |
| { 0x58, 25, 9, 4, 12}, /* 32 MB */ | |
| { 0,} | |
| }; | |
| static struct alauda_card_info *alauda_card_find_id(unsigned char id) | |
| { | |
| int i; | |
| for (i = 0; alauda_card_ids[i].id != 0; i++) | |
| if (alauda_card_ids[i].id == id) | |
| return &(alauda_card_ids[i]); | |
| return NULL; | |
| } | |
| /* | |
| * ECC computation. | |
| */ | |
| static unsigned char parity[256]; | |
| static unsigned char ecc2[256]; | |
| static void nand_init_ecc(void) | |
| { | |
| int i, j, a; | |
| parity[0] = 0; | |
| for (i = 1; i < 256; i++) | |
| parity[i] = (parity[i&(i-1)] ^ 1); | |
| for (i = 0; i < 256; i++) { | |
| a = 0; | |
| for (j = 0; j < 8; j++) { | |
| if (i & (1<<j)) { | |
| if ((j & 1) == 0) | |
| a ^= 0x04; | |
| if ((j & 2) == 0) | |
| a ^= 0x10; | |
| if ((j & 4) == 0) | |
| a ^= 0x40; | |
| } | |
| } | |
| ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0)); | |
| } | |
| } | |
| /* compute 3-byte ecc on 256 bytes */ | |
| static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) | |
| { | |
| int i, j, a; | |
| unsigned char par = 0, bit, bits[8] = {0}; | |
| /* collect 16 checksum bits */ | |
| for (i = 0; i < 256; i++) { | |
| par ^= data[i]; | |
| bit = parity[data[i]]; | |
| for (j = 0; j < 8; j++) | |
| if ((i & (1<<j)) == 0) | |
| bits[j] ^= bit; | |
| } | |
| /* put 4+4+4 = 12 bits in the ecc */ | |
| a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0]; | |
| ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); | |
| a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4]; | |
| ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0)); | |
| ecc[2] = ecc2[par]; | |
| } | |
| static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) | |
| { | |
| return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]); | |
| } | |
| static void nand_store_ecc(unsigned char *data, unsigned char *ecc) | |
| { | |
| memcpy(data, ecc, 3); | |
| } | |
| /* | |
| * Alauda driver | |
| */ | |
| /* | |
| * Forget our PBA <---> LBA mappings for a particular port | |
| */ | |
| static void alauda_free_maps (struct alauda_media_info *media_info) | |
| { | |
| unsigned int shift = media_info->zoneshift | |
| + media_info->blockshift + media_info->pageshift; | |
| unsigned int num_zones = media_info->capacity >> shift; | |
| unsigned int i; | |
| if (media_info->lba_to_pba != NULL) | |
| for (i = 0; i < num_zones; i++) { | |
| kfree(media_info->lba_to_pba[i]); | |
| media_info->lba_to_pba[i] = NULL; | |
| } | |
| if (media_info->pba_to_lba != NULL) | |
| for (i = 0; i < num_zones; i++) { | |
| kfree(media_info->pba_to_lba[i]); | |
| media_info->pba_to_lba[i] = NULL; | |
| } | |
| } | |
| /* | |
| * Returns 2 bytes of status data | |
| * The first byte describes media status, and second byte describes door status | |
| */ | |
| static int alauda_get_media_status(struct us_data *us, unsigned char *data) | |
| { | |
| int rc; | |
| unsigned char command; | |
| if (MEDIA_PORT(us) == ALAUDA_PORT_XD) | |
| command = ALAUDA_GET_XD_MEDIA_STATUS; | |
| else | |
| command = ALAUDA_GET_SM_MEDIA_STATUS; | |
| rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, | |
| command, 0xc0, 0, 1, data, 2); | |
| usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]); | |
| return rc; | |
| } | |
| /* | |
| * Clears the "media was changed" bit so that we know when it changes again | |
| * in the future. | |
| */ | |
| static int alauda_ack_media(struct us_data *us) | |
| { | |
| unsigned char command; | |
| if (MEDIA_PORT(us) == ALAUDA_PORT_XD) | |
| command = ALAUDA_ACK_XD_MEDIA_CHANGE; | |
| else | |
| command = ALAUDA_ACK_SM_MEDIA_CHANGE; | |
| return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, | |
| command, 0x40, 0, 1, NULL, 0); | |
| } | |
| /* | |
| * Retrieves a 4-byte media signature, which indicates manufacturer, capacity, | |
| * and some other details. | |
| */ | |
| static int alauda_get_media_signature(struct us_data *us, unsigned char *data) | |
| { | |
| unsigned char command; | |
| if (MEDIA_PORT(us) == ALAUDA_PORT_XD) | |
| command = ALAUDA_GET_XD_MEDIA_SIG; | |
| else | |
| command = ALAUDA_GET_SM_MEDIA_SIG; | |
| return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, | |
| command, 0xc0, 0, 0, data, 4); | |
| } | |
| /* | |
| * Resets the media status (but not the whole device?) | |
| */ | |
| static int alauda_reset_media(struct us_data *us) | |
| { | |
| unsigned char *command = us->iobuf; | |
| memset(command, 0, 9); | |
| command[0] = ALAUDA_BULK_CMD; | |
| command[1] = ALAUDA_BULK_RESET_MEDIA; | |
| command[8] = MEDIA_PORT(us); | |
| return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
| command, 9, NULL); | |
| } | |
| /* | |
| * Examines the media and deduces capacity, etc. | |
| */ | |
| static int alauda_init_media(struct us_data *us) | |
| { | |
| unsigned char *data = us->iobuf; | |
| int ready = 0; | |
| struct alauda_card_info *media_info; | |
| unsigned int num_zones; | |
| while (ready == 0) { | |
| msleep(20); | |
| if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| if (data[0] & 0x10) | |
| ready = 1; | |
| } | |
| usb_stor_dbg(us, "We are ready for action!\n"); | |
| if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| msleep(10); | |
| if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| if (data[0] != 0x14) { | |
| usb_stor_dbg(us, "Media not ready after ack\n"); | |
| return USB_STOR_TRANSPORT_ERROR; | |
| } | |
| if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| usb_stor_dbg(us, "Media signature: %4ph\n", data); | |
| media_info = alauda_card_find_id(data[1]); | |
| if (media_info == NULL) { | |
| pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n", | |
| data); | |
| return USB_STOR_TRANSPORT_ERROR; | |
| } | |
| MEDIA_INFO(us).capacity = 1 << media_info->chipshift; | |
| usb_stor_dbg(us, "Found media with capacity: %ldMB\n", | |
| MEDIA_INFO(us).capacity >> 20); | |
| MEDIA_INFO(us).pageshift = media_info->pageshift; | |
| MEDIA_INFO(us).blockshift = media_info->blockshift; | |
| MEDIA_INFO(us).zoneshift = media_info->zoneshift; | |
| MEDIA_INFO(us).pagesize = 1 << media_info->pageshift; | |
| MEDIA_INFO(us).blocksize = 1 << media_info->blockshift; | |
| MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift; | |
| MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125; | |
| MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1; | |
| num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift | |
| + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); | |
| MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); | |
| MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO); | |
| if (alauda_reset_media(us) != USB_STOR_XFER_GOOD) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| /* | |
| * Examines the media status and does the right thing when the media has gone, | |
| * appeared, or changed. | |
| */ | |
| static int alauda_check_media(struct us_data *us) | |
| { | |
| struct alauda_info *info = (struct alauda_info *) us->extra; | |
| unsigned char status[2]; | |
| int rc; | |
| rc = alauda_get_media_status(us, status); | |
| /* Check for no media or door open */ | |
| if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) | |
| || ((status[1] & 0x01) == 0)) { | |
| usb_stor_dbg(us, "No media, or door open\n"); | |
| alauda_free_maps(&MEDIA_INFO(us)); | |
| info->sense_key = 0x02; | |
| info->sense_asc = 0x3A; | |
| info->sense_ascq = 0x00; | |
| return USB_STOR_TRANSPORT_FAILED; | |
| } | |
| /* Check for media change */ | |
| if (status[0] & 0x08) { | |
| usb_stor_dbg(us, "Media change detected\n"); | |
| alauda_free_maps(&MEDIA_INFO(us)); | |
| alauda_init_media(us); | |
| info->sense_key = UNIT_ATTENTION; | |
| info->sense_asc = 0x28; | |
| info->sense_ascq = 0x00; | |
| return USB_STOR_TRANSPORT_FAILED; | |
| } | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| /* | |
| * Checks the status from the 2nd status register | |
| * Returns 3 bytes of status data, only the first is known | |
| */ | |
| static int alauda_check_status2(struct us_data *us) | |
| { | |
| int rc; | |
| unsigned char command[] = { | |
| ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2, | |
| 0, 0, 0, 0, 3, 0, MEDIA_PORT(us) | |
| }; | |
| unsigned char data[3]; | |
| rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
| command, 9, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
| data, 3, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| usb_stor_dbg(us, "%3ph\n", data); | |
| if (data[0] & ALAUDA_STATUS_ERROR) | |
| return USB_STOR_XFER_ERROR; | |
| return USB_STOR_XFER_GOOD; | |
| } | |
| /* | |
| * Gets the redundancy data for the first page of a PBA | |
| * Returns 16 bytes. | |
| */ | |
| static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data) | |
| { | |
| int rc; | |
| unsigned char command[] = { | |
| ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA, | |
| PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us) | |
| }; | |
| rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
| command, 9, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
| data, 16, NULL); | |
| } | |
| /* | |
| * Finds the first unused PBA in a zone | |
| * Returns the absolute PBA of an unused PBA, or 0 if none found. | |
| */ | |
| static u16 alauda_find_unused_pba(struct alauda_media_info *info, | |
| unsigned int zone) | |
| { | |
| u16 *pba_to_lba = info->pba_to_lba[zone]; | |
| unsigned int i; | |
| for (i = 0; i < info->zonesize; i++) | |
| if (pba_to_lba[i] == UNDEF) | |
| return (zone << info->zoneshift) + i; | |
| return 0; | |
| } | |
| /* | |
| * Reads the redundancy data for all PBA's in a zone | |
| * Produces lba <--> pba mappings | |
| */ | |
| static int alauda_read_map(struct us_data *us, unsigned int zone) | |
| { | |
| unsigned char *data = us->iobuf; | |
| int result; | |
| int i, j; | |
| unsigned int zonesize = MEDIA_INFO(us).zonesize; | |
| unsigned int uzonesize = MEDIA_INFO(us).uzonesize; | |
| unsigned int lba_offset, lba_real, blocknum; | |
| unsigned int zone_base_lba = zone * uzonesize; | |
| unsigned int zone_base_pba = zone * zonesize; | |
| u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); | |
| u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO); | |
| if (lba_to_pba == NULL || pba_to_lba == NULL) { | |
| result = USB_STOR_TRANSPORT_ERROR; | |
| goto error; | |
| } | |
| usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone); | |
| /* 1024 PBA's per zone */ | |
| for (i = 0; i < zonesize; i++) | |
| lba_to_pba[i] = pba_to_lba[i] = UNDEF; | |
| for (i = 0; i < zonesize; i++) { | |
| blocknum = zone_base_pba + i; | |
| result = alauda_get_redu_data(us, blocknum, data); | |
| if (result != USB_STOR_XFER_GOOD) { | |
| result = USB_STOR_TRANSPORT_ERROR; | |
| goto error; | |
| } | |
| /* special PBAs have control field 0^16 */ | |
| for (j = 0; j < 16; j++) | |
| if (data[j] != 0) | |
| goto nonz; | |
| pba_to_lba[i] = UNUSABLE; | |
| usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum); | |
| continue; | |
| nonz: | |
| /* unwritten PBAs have control field FF^16 */ | |
| for (j = 0; j < 16; j++) | |
| if (data[j] != 0xff) | |
| goto nonff; | |
| continue; | |
| nonff: | |
| /* normal PBAs start with six FFs */ | |
| if (j < 6) { | |
| usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n", | |
| blocknum, | |
| data[0], data[1], data[2], data[3], | |
| data[4], data[5]); | |
| pba_to_lba[i] = UNUSABLE; | |
| continue; | |
| } | |
| if ((data[6] >> 4) != 0x01) { | |
| usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n", | |
| blocknum, data[6], data[7], | |
| data[11], data[12]); | |
| pba_to_lba[i] = UNUSABLE; | |
| continue; | |
| } | |
| /* check even parity */ | |
| if (parity[data[6] ^ data[7]]) { | |
| printk(KERN_WARNING | |
| "alauda_read_map: Bad parity in LBA for block %d" | |
| " (%02X %02X)\n", i, data[6], data[7]); | |
| pba_to_lba[i] = UNUSABLE; | |
| continue; | |
| } | |
| lba_offset = short_pack(data[7], data[6]); | |
| lba_offset = (lba_offset & 0x07FF) >> 1; | |
| lba_real = lba_offset + zone_base_lba; | |
| /* | |
| * Every 1024 physical blocks ("zone"), the LBA numbers | |
| * go back to zero, but are within a higher block of LBA's. | |
| * Also, there is a maximum of 1000 LBA's per zone. | |
| * In other words, in PBA 1024-2047 you will find LBA 0-999 | |
| * which are really LBA 1000-1999. This allows for 24 bad | |
| * or special physical blocks per zone. | |
| */ | |
| if (lba_offset >= uzonesize) { | |
| printk(KERN_WARNING | |
| "alauda_read_map: Bad low LBA %d for block %d\n", | |
| lba_real, blocknum); | |
| continue; | |
| } | |
| if (lba_to_pba[lba_offset] != UNDEF) { | |
| printk(KERN_WARNING | |
| "alauda_read_map: " | |
| "LBA %d seen for PBA %d and %d\n", | |
| lba_real, lba_to_pba[lba_offset], blocknum); | |
| continue; | |
| } | |
| pba_to_lba[i] = lba_real; | |
| lba_to_pba[lba_offset] = blocknum; | |
| continue; | |
| } | |
| MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba; | |
| MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba; | |
| result = 0; | |
| goto out; | |
| error: | |
| kfree(lba_to_pba); | |
| kfree(pba_to_lba); | |
| out: | |
| return result; | |
| } | |
| /* | |
| * Checks to see whether we have already mapped a certain zone | |
| * If we haven't, the map is generated | |
| */ | |
| static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone) | |
| { | |
| if (MEDIA_INFO(us).lba_to_pba[zone] == NULL | |
| || MEDIA_INFO(us).pba_to_lba[zone] == NULL) | |
| alauda_read_map(us, zone); | |
| } | |
| /* | |
| * Erases an entire block | |
| */ | |
| static int alauda_erase_block(struct us_data *us, u16 pba) | |
| { | |
| int rc; | |
| unsigned char command[] = { | |
| ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba), | |
| PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us) | |
| }; | |
| unsigned char buf[2]; | |
| usb_stor_dbg(us, "Erasing PBA %d\n", pba); | |
| rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
| command, 9, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
| buf, 2, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]); | |
| return rc; | |
| } | |
| /* | |
| * Reads data from a certain offset page inside a PBA, including interleaved | |
| * redundancy data. Returns (pagesize+64)*pages bytes in data. | |
| */ | |
| static int alauda_read_block_raw(struct us_data *us, u16 pba, | |
| unsigned int page, unsigned int pages, unsigned char *data) | |
| { | |
| int rc; | |
| unsigned char command[] = { | |
| ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba), | |
| PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) | |
| }; | |
| usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages); | |
| rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
| command, 9, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, | |
| data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL); | |
| } | |
| /* | |
| * Reads data from a certain offset page inside a PBA, excluding redundancy | |
| * data. Returns pagesize*pages bytes in data. Note that data must be big enough | |
| * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra' | |
| * trailing bytes outside this function. | |
| */ | |
| static int alauda_read_block(struct us_data *us, u16 pba, | |
| unsigned int page, unsigned int pages, unsigned char *data) | |
| { | |
| int i, rc; | |
| unsigned int pagesize = MEDIA_INFO(us).pagesize; | |
| rc = alauda_read_block_raw(us, pba, page, pages, data); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| /* Cut out the redundancy data */ | |
| for (i = 0; i < pages; i++) { | |
| int dest_offset = i * pagesize; | |
| int src_offset = i * (pagesize + 64); | |
| memmove(data + dest_offset, data + src_offset, pagesize); | |
| } | |
| return rc; | |
| } | |
| /* | |
| * Writes an entire block of data and checks status after write. | |
| * Redundancy data must be already included in data. Data should be | |
| * (pagesize+64)*blocksize bytes in length. | |
| */ | |
| static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) | |
| { | |
| int rc; | |
| struct alauda_info *info = (struct alauda_info *) us->extra; | |
| unsigned char command[] = { | |
| ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba), | |
| PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) | |
| }; | |
| usb_stor_dbg(us, "pba %d\n", pba); | |
| rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, | |
| command, 9, NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data, | |
| (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize, | |
| NULL); | |
| if (rc != USB_STOR_XFER_GOOD) | |
| return rc; | |
| return alauda_check_status2(us); | |
| } | |
| /* | |
| * Write some data to a specific LBA. | |
| */ | |
| static int alauda_write_lba(struct us_data *us, u16 lba, | |
| unsigned int page, unsigned int pages, | |
| unsigned char *ptr, unsigned char *blockbuffer) | |
| { | |
| u16 pba, lbap, new_pba; | |
| unsigned char *bptr, *cptr, *xptr; | |
| unsigned char ecc[3]; | |
| int i, result; | |
| unsigned int uzonesize = MEDIA_INFO(us).uzonesize; | |
| unsigned int zonesize = MEDIA_INFO(us).zonesize; | |
| unsigned int pagesize = MEDIA_INFO(us).pagesize; | |
| unsigned int blocksize = MEDIA_INFO(us).blocksize; | |
| unsigned int lba_offset = lba % uzonesize; | |
| unsigned int new_pba_offset; | |
| unsigned int zone = lba / uzonesize; | |
| alauda_ensure_map_for_zone(us, zone); | |
| pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; | |
| if (pba == 1) { | |
| /* | |
| * Maybe it is impossible to write to PBA 1. | |
| * Fake success, but don't do anything. | |
| */ | |
| printk(KERN_WARNING | |
| "alauda_write_lba: avoid writing to pba 1\n"); | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); | |
| if (!new_pba) { | |
| printk(KERN_WARNING | |
| "alauda_write_lba: Out of unused blocks\n"); | |
| return USB_STOR_TRANSPORT_ERROR; | |
| } | |
| /* read old contents */ | |
| if (pba != UNDEF) { | |
| result = alauda_read_block_raw(us, pba, 0, | |
| blocksize, blockbuffer); | |
| if (result != USB_STOR_XFER_GOOD) | |
| return result; | |
| } else { | |
| memset(blockbuffer, 0, blocksize * (pagesize + 64)); | |
| } | |
| lbap = (lba_offset << 1) | 0x1000; | |
| if (parity[MSB_of(lbap) ^ LSB_of(lbap)]) | |
| lbap ^= 1; | |
| /* check old contents and fill lba */ | |
| for (i = 0; i < blocksize; i++) { | |
| bptr = blockbuffer + (i * (pagesize + 64)); | |
| cptr = bptr + pagesize; | |
| nand_compute_ecc(bptr, ecc); | |
| if (!nand_compare_ecc(cptr+13, ecc)) { | |
| usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", | |
| i, pba); | |
| nand_store_ecc(cptr+13, ecc); | |
| } | |
| nand_compute_ecc(bptr + (pagesize / 2), ecc); | |
| if (!nand_compare_ecc(cptr+8, ecc)) { | |
| usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", | |
| i, pba); | |
| nand_store_ecc(cptr+8, ecc); | |
| } | |
| cptr[6] = cptr[11] = MSB_of(lbap); | |
| cptr[7] = cptr[12] = LSB_of(lbap); | |
| } | |
| /* copy in new stuff and compute ECC */ | |
| xptr = ptr; | |
| for (i = page; i < page+pages; i++) { | |
| bptr = blockbuffer + (i * (pagesize + 64)); | |
| cptr = bptr + pagesize; | |
| memcpy(bptr, xptr, pagesize); | |
| xptr += pagesize; | |
| nand_compute_ecc(bptr, ecc); | |
| nand_store_ecc(cptr+13, ecc); | |
| nand_compute_ecc(bptr + (pagesize / 2), ecc); | |
| nand_store_ecc(cptr+8, ecc); | |
| } | |
| result = alauda_write_block(us, new_pba, blockbuffer); | |
| if (result != USB_STOR_XFER_GOOD) | |
| return result; | |
| new_pba_offset = new_pba - (zone * zonesize); | |
| MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; | |
| MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; | |
| usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba); | |
| if (pba != UNDEF) { | |
| unsigned int pba_offset = pba - (zone * zonesize); | |
| result = alauda_erase_block(us, pba); | |
| if (result != USB_STOR_XFER_GOOD) | |
| return result; | |
| MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF; | |
| } | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| /* | |
| * Read data from a specific sector address | |
| */ | |
| static int alauda_read_data(struct us_data *us, unsigned long address, | |
| unsigned int sectors) | |
| { | |
| unsigned char *buffer; | |
| u16 lba, max_lba; | |
| unsigned int page, len, offset; | |
| unsigned int blockshift = MEDIA_INFO(us).blockshift; | |
| unsigned int pageshift = MEDIA_INFO(us).pageshift; | |
| unsigned int blocksize = MEDIA_INFO(us).blocksize; | |
| unsigned int pagesize = MEDIA_INFO(us).pagesize; | |
| unsigned int uzonesize = MEDIA_INFO(us).uzonesize; | |
| struct scatterlist *sg; | |
| int result; | |
| /* | |
| * Since we only read in one block at a time, we have to create | |
| * a bounce buffer and move the data a piece at a time between the | |
| * bounce buffer and the actual transfer buffer. | |
| * We make this buffer big enough to hold temporary redundancy data, | |
| * which we use when reading the data blocks. | |
| */ | |
| len = min(sectors, blocksize) * (pagesize + 64); | |
| buffer = kmalloc(len, GFP_NOIO); | |
| if (!buffer) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| /* Figure out the initial LBA and page */ | |
| lba = address >> blockshift; | |
| page = (address & MEDIA_INFO(us).blockmask); | |
| max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift); | |
| result = USB_STOR_TRANSPORT_GOOD; | |
| offset = 0; | |
| sg = NULL; | |
| while (sectors > 0) { | |
| unsigned int zone = lba / uzonesize; /* integer division */ | |
| unsigned int lba_offset = lba - (zone * uzonesize); | |
| unsigned int pages; | |
| u16 pba; | |
| alauda_ensure_map_for_zone(us, zone); | |
| /* Not overflowing capacity? */ | |
| if (lba >= max_lba) { | |
| usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", | |
| lba, max_lba); | |
| result = USB_STOR_TRANSPORT_ERROR; | |
| break; | |
| } | |
| /* Find number of pages we can read in this block */ | |
| pages = min(sectors, blocksize - page); | |
| len = pages << pageshift; | |
| /* Find where this lba lives on disk */ | |
| pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; | |
| if (pba == UNDEF) { /* this lba was never written */ | |
| usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", | |
| pages, lba, page); | |
| /* | |
| * This is not really an error. It just means | |
| * that the block has never been written. | |
| * Instead of returning USB_STOR_TRANSPORT_ERROR | |
| * it is better to return all zero data. | |
| */ | |
| memset(buffer, 0, len); | |
| } else { | |
| usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", | |
| pages, pba, lba, page); | |
| result = alauda_read_block(us, pba, page, pages, buffer); | |
| if (result != USB_STOR_TRANSPORT_GOOD) | |
| break; | |
| } | |
| /* Store the data in the transfer buffer */ | |
| usb_stor_access_xfer_buf(buffer, len, us->srb, | |
| &sg, &offset, TO_XFER_BUF); | |
| page = 0; | |
| lba++; | |
| sectors -= pages; | |
| } | |
| kfree(buffer); | |
| return result; | |
| } | |
| /* | |
| * Write data to a specific sector address | |
| */ | |
| static int alauda_write_data(struct us_data *us, unsigned long address, | |
| unsigned int sectors) | |
| { | |
| unsigned char *buffer, *blockbuffer; | |
| unsigned int page, len, offset; | |
| unsigned int blockshift = MEDIA_INFO(us).blockshift; | |
| unsigned int pageshift = MEDIA_INFO(us).pageshift; | |
| unsigned int blocksize = MEDIA_INFO(us).blocksize; | |
| unsigned int pagesize = MEDIA_INFO(us).pagesize; | |
| struct scatterlist *sg; | |
| u16 lba, max_lba; | |
| int result; | |
| /* | |
| * Since we don't write the user data directly to the device, | |
| * we have to create a bounce buffer and move the data a piece | |
| * at a time between the bounce buffer and the actual transfer buffer. | |
| */ | |
| len = min(sectors, blocksize) * pagesize; | |
| buffer = kmalloc(len, GFP_NOIO); | |
| if (!buffer) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| /* | |
| * We also need a temporary block buffer, where we read in the old data, | |
| * overwrite parts with the new data, and manipulate the redundancy data | |
| */ | |
| blockbuffer = kmalloc_array(pagesize + 64, blocksize, GFP_NOIO); | |
| if (!blockbuffer) { | |
| kfree(buffer); | |
| return USB_STOR_TRANSPORT_ERROR; | |
| } | |
| /* Figure out the initial LBA and page */ | |
| lba = address >> blockshift; | |
| page = (address & MEDIA_INFO(us).blockmask); | |
| max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift); | |
| result = USB_STOR_TRANSPORT_GOOD; | |
| offset = 0; | |
| sg = NULL; | |
| while (sectors > 0) { | |
| /* Write as many sectors as possible in this block */ | |
| unsigned int pages = min(sectors, blocksize - page); | |
| len = pages << pageshift; | |
| /* Not overflowing capacity? */ | |
| if (lba >= max_lba) { | |
| usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n", | |
| lba, max_lba); | |
| result = USB_STOR_TRANSPORT_ERROR; | |
| break; | |
| } | |
| /* Get the data from the transfer buffer */ | |
| usb_stor_access_xfer_buf(buffer, len, us->srb, | |
| &sg, &offset, FROM_XFER_BUF); | |
| result = alauda_write_lba(us, lba, page, pages, buffer, | |
| blockbuffer); | |
| if (result != USB_STOR_TRANSPORT_GOOD) | |
| break; | |
| page = 0; | |
| lba++; | |
| sectors -= pages; | |
| } | |
| kfree(buffer); | |
| kfree(blockbuffer); | |
| return result; | |
| } | |
| /* | |
| * Our interface with the rest of the world | |
| */ | |
| static void alauda_info_destructor(void *extra) | |
| { | |
| struct alauda_info *info = (struct alauda_info *) extra; | |
| int port; | |
| if (!info) | |
| return; | |
| for (port = 0; port < 2; port++) { | |
| struct alauda_media_info *media_info = &info->port[port]; | |
| alauda_free_maps(media_info); | |
| kfree(media_info->lba_to_pba); | |
| kfree(media_info->pba_to_lba); | |
| } | |
| } | |
| /* | |
| * Initialize alauda_info struct and find the data-write endpoint | |
| */ | |
| static int init_alauda(struct us_data *us) | |
| { | |
| struct alauda_info *info; | |
| struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; | |
| nand_init_ecc(); | |
| us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); | |
| if (!us->extra) | |
| return USB_STOR_TRANSPORT_ERROR; | |
| info = (struct alauda_info *) us->extra; | |
| us->extra_destructor = alauda_info_destructor; | |
| info->wr_ep = usb_sndbulkpipe(us->pusb_dev, | |
| altsetting->endpoint[0].desc.bEndpointAddress | |
| & USB_ENDPOINT_NUMBER_MASK); | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) | |
| { | |
| int rc; | |
| struct alauda_info *info = (struct alauda_info *) us->extra; | |
| unsigned char *ptr = us->iobuf; | |
| static unsigned char inquiry_response[36] = { | |
| 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 | |
| }; | |
| if (srb->cmnd[0] == INQUIRY) { | |
| usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); | |
| memcpy(ptr, inquiry_response, sizeof(inquiry_response)); | |
| fill_inquiry_response(us, ptr, 36); | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| if (srb->cmnd[0] == TEST_UNIT_READY) { | |
| usb_stor_dbg(us, "TEST_UNIT_READY\n"); | |
| return alauda_check_media(us); | |
| } | |
| if (srb->cmnd[0] == READ_CAPACITY) { | |
| unsigned int num_zones; | |
| unsigned long capacity; | |
| rc = alauda_check_media(us); | |
| if (rc != USB_STOR_TRANSPORT_GOOD) | |
| return rc; | |
| num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift | |
| + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift); | |
| capacity = num_zones * MEDIA_INFO(us).uzonesize | |
| * MEDIA_INFO(us).blocksize; | |
| /* Report capacity and page size */ | |
| ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1); | |
| ((__be32 *) ptr)[1] = cpu_to_be32(512); | |
| usb_stor_set_xfer_buf(ptr, 8, srb); | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| if (srb->cmnd[0] == READ_10) { | |
| unsigned int page, pages; | |
| rc = alauda_check_media(us); | |
| if (rc != USB_STOR_TRANSPORT_GOOD) | |
| return rc; | |
| page = short_pack(srb->cmnd[3], srb->cmnd[2]); | |
| page <<= 16; | |
| page |= short_pack(srb->cmnd[5], srb->cmnd[4]); | |
| pages = short_pack(srb->cmnd[8], srb->cmnd[7]); | |
| usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages); | |
| return alauda_read_data(us, page, pages); | |
| } | |
| if (srb->cmnd[0] == WRITE_10) { | |
| unsigned int page, pages; | |
| rc = alauda_check_media(us); | |
| if (rc != USB_STOR_TRANSPORT_GOOD) | |
| return rc; | |
| page = short_pack(srb->cmnd[3], srb->cmnd[2]); | |
| page <<= 16; | |
| page |= short_pack(srb->cmnd[5], srb->cmnd[4]); | |
| pages = short_pack(srb->cmnd[8], srb->cmnd[7]); | |
| usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages); | |
| return alauda_write_data(us, page, pages); | |
| } | |
| if (srb->cmnd[0] == REQUEST_SENSE) { | |
| usb_stor_dbg(us, "REQUEST_SENSE\n"); | |
| memset(ptr, 0, 18); | |
| ptr[0] = 0xF0; | |
| ptr[2] = info->sense_key; | |
| ptr[7] = 11; | |
| ptr[12] = info->sense_asc; | |
| ptr[13] = info->sense_ascq; | |
| usb_stor_set_xfer_buf(ptr, 18, srb); | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { | |
| /* | |
| * sure. whatever. not like we can stop the user from popping | |
| * the media out of the device (no locking doors, etc) | |
| */ | |
| return USB_STOR_TRANSPORT_GOOD; | |
| } | |
| usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", | |
| srb->cmnd[0], srb->cmnd[0]); | |
| info->sense_key = 0x05; | |
| info->sense_asc = 0x20; | |
| info->sense_ascq = 0x00; | |
| return USB_STOR_TRANSPORT_FAILED; | |
| } | |
| static struct scsi_host_template alauda_host_template; | |
| static int alauda_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct us_data *us; | |
| int result; | |
| result = usb_stor_probe1(&us, intf, id, | |
| (id - alauda_usb_ids) + alauda_unusual_dev_list, | |
| &alauda_host_template); | |
| if (result) | |
| return result; | |
| us->transport_name = "Alauda Control/Bulk"; | |
| us->transport = alauda_transport; | |
| us->transport_reset = usb_stor_Bulk_reset; | |
| us->max_lun = 1; | |
| result = usb_stor_probe2(us); | |
| return result; | |
| } | |
| static struct usb_driver alauda_driver = { | |
| .name = DRV_NAME, | |
| .probe = alauda_probe, | |
| .disconnect = usb_stor_disconnect, | |
| .suspend = usb_stor_suspend, | |
| .resume = usb_stor_resume, | |
| .reset_resume = usb_stor_reset_resume, | |
| .pre_reset = usb_stor_pre_reset, | |
| .post_reset = usb_stor_post_reset, | |
| .id_table = alauda_usb_ids, | |
| .soft_unbind = 1, | |
| .no_dynamic_id = 1, | |
| }; | |
| module_usb_stor_driver(alauda_driver, alauda_host_template, DRV_NAME); |