| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver | |
| * Based on usb3503 driver | |
| * | |
| * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com) | |
| * Copyright (c) 2016 Linaro Ltd. | |
| */ | |
| #include <linux/i2c.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/gpio/consumer.h> | |
| enum usb4604_mode { | |
| USB4604_MODE_UNKNOWN, | |
| USB4604_MODE_HUB, | |
| USB4604_MODE_STANDBY, | |
| }; | |
| struct usb4604 { | |
| enum usb4604_mode mode; | |
| struct device *dev; | |
| struct gpio_desc *gpio_reset; | |
| }; | |
| static void usb4604_reset(struct usb4604 *hub, int state) | |
| { | |
| gpiod_set_value_cansleep(hub->gpio_reset, state); | |
| /* Wait for i2c logic to come up */ | |
| if (state) | |
| msleep(250); | |
| } | |
| static int usb4604_connect(struct usb4604 *hub) | |
| { | |
| struct device *dev = hub->dev; | |
| struct i2c_client *client = to_i2c_client(dev); | |
| int err; | |
| u8 connect_cmd[] = { 0xaa, 0x55, 0x00 }; | |
| usb4604_reset(hub, 1); | |
| err = i2c_master_send(client, connect_cmd, ARRAY_SIZE(connect_cmd)); | |
| if (err < 0) { | |
| usb4604_reset(hub, 0); | |
| return err; | |
| } | |
| hub->mode = USB4604_MODE_HUB; | |
| dev_dbg(dev, "switched to HUB mode\n"); | |
| return 0; | |
| } | |
| static int usb4604_switch_mode(struct usb4604 *hub, enum usb4604_mode mode) | |
| { | |
| struct device *dev = hub->dev; | |
| int err = 0; | |
| switch (mode) { | |
| case USB4604_MODE_HUB: | |
| err = usb4604_connect(hub); | |
| break; | |
| case USB4604_MODE_STANDBY: | |
| usb4604_reset(hub, 0); | |
| dev_dbg(dev, "switched to STANDBY mode\n"); | |
| break; | |
| default: | |
| dev_err(dev, "unknown mode is requested\n"); | |
| err = -EINVAL; | |
| break; | |
| } | |
| return err; | |
| } | |
| static int usb4604_probe(struct usb4604 *hub) | |
| { | |
| struct device *dev = hub->dev; | |
| struct device_node *np = dev->of_node; | |
| struct gpio_desc *gpio; | |
| u32 mode = USB4604_MODE_HUB; | |
| gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | |
| if (IS_ERR(gpio)) | |
| return PTR_ERR(gpio); | |
| hub->gpio_reset = gpio; | |
| if (of_property_read_u32(np, "initial-mode", &hub->mode)) | |
| hub->mode = mode; | |
| return usb4604_switch_mode(hub, hub->mode); | |
| } | |
| static int usb4604_i2c_probe(struct i2c_client *i2c, | |
| const struct i2c_device_id *id) | |
| { | |
| struct usb4604 *hub; | |
| hub = devm_kzalloc(&i2c->dev, sizeof(*hub), GFP_KERNEL); | |
| if (!hub) | |
| return -ENOMEM; | |
| i2c_set_clientdata(i2c, hub); | |
| hub->dev = &i2c->dev; | |
| return usb4604_probe(hub); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int usb4604_i2c_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct usb4604 *hub = i2c_get_clientdata(client); | |
| usb4604_switch_mode(hub, USB4604_MODE_STANDBY); | |
| return 0; | |
| } | |
| static int usb4604_i2c_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct usb4604 *hub = i2c_get_clientdata(client); | |
| usb4604_switch_mode(hub, hub->mode); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(usb4604_i2c_pm_ops, usb4604_i2c_suspend, | |
| usb4604_i2c_resume); | |
| static const struct i2c_device_id usb4604_id[] = { | |
| { "usb4604", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, usb4604_id); | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id usb4604_of_match[] = { | |
| { .compatible = "smsc,usb4604" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, usb4604_of_match); | |
| #endif | |
| static struct i2c_driver usb4604_i2c_driver = { | |
| .driver = { | |
| .name = "usb4604", | |
| .pm = &usb4604_i2c_pm_ops, | |
| .of_match_table = of_match_ptr(usb4604_of_match), | |
| }, | |
| .probe = usb4604_i2c_probe, | |
| .id_table = usb4604_id, | |
| }; | |
| module_i2c_driver(usb4604_i2c_driver); | |
| MODULE_DESCRIPTION("USB4604 USB HUB driver"); | |
| MODULE_LICENSE("GPL v2"); |