| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * EZ-USB specific functions used by some of the USB to Serial drivers. | |
| * | |
| * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/usb.h> | |
| #include <linux/firmware.h> | |
| #include <linux/ihex.h> | |
| #include <linux/usb/ezusb.h> | |
| struct ezusb_fx_type { | |
| /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ | |
| unsigned short cpucs_reg; | |
| unsigned short max_internal_adress; | |
| }; | |
| static const struct ezusb_fx_type ezusb_fx1 = { | |
| .cpucs_reg = 0x7F92, | |
| .max_internal_adress = 0x1B3F, | |
| }; | |
| /* Commands for writing to memory */ | |
| #define WRITE_INT_RAM 0xA0 | |
| #define WRITE_EXT_RAM 0xA3 | |
| static int ezusb_writememory(struct usb_device *dev, int address, | |
| unsigned char *data, int length, __u8 request) | |
| { | |
| int result; | |
| unsigned char *transfer_buffer; | |
| if (!dev) | |
| return -ENODEV; | |
| transfer_buffer = kmemdup(data, length, GFP_KERNEL); | |
| if (!transfer_buffer) { | |
| dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n", | |
| __func__, length); | |
| return -ENOMEM; | |
| } | |
| result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, | |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | |
| address, 0, transfer_buffer, length, 3000); | |
| kfree(transfer_buffer); | |
| return result; | |
| } | |
| static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg, | |
| unsigned char reset_bit) | |
| { | |
| int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM); | |
| if (response < 0) | |
| dev_err(&dev->dev, "%s-%d failed: %d\n", | |
| __func__, reset_bit, response); | |
| return response; | |
| } | |
| int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit) | |
| { | |
| return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit); | |
| } | |
| EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset); | |
| static int ezusb_ihex_firmware_download(struct usb_device *dev, | |
| struct ezusb_fx_type fx, | |
| const char *firmware_path) | |
| { | |
| int ret = -ENOENT; | |
| const struct firmware *firmware = NULL; | |
| const struct ihex_binrec *record; | |
| if (request_ihex_firmware(&firmware, firmware_path, | |
| &dev->dev)) { | |
| dev_err(&dev->dev, | |
| "%s - request \"%s\" failed\n", | |
| __func__, firmware_path); | |
| goto out; | |
| } | |
| ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); | |
| if (ret < 0) | |
| goto out; | |
| record = (const struct ihex_binrec *)firmware->data; | |
| for (; record; record = ihex_next_binrec(record)) { | |
| if (be32_to_cpu(record->addr) > fx.max_internal_adress) { | |
| ret = ezusb_writememory(dev, be32_to_cpu(record->addr), | |
| (unsigned char *)record->data, | |
| be16_to_cpu(record->len), WRITE_EXT_RAM); | |
| if (ret < 0) { | |
| dev_err(&dev->dev, "%s - ezusb_writememory " | |
| "failed writing internal memory " | |
| "(%d %04X %p %d)\n", __func__, ret, | |
| be32_to_cpu(record->addr), record->data, | |
| be16_to_cpu(record->len)); | |
| goto out; | |
| } | |
| } | |
| } | |
| ret = ezusb_set_reset(dev, fx.cpucs_reg, 1); | |
| if (ret < 0) | |
| goto out; | |
| record = (const struct ihex_binrec *)firmware->data; | |
| for (; record; record = ihex_next_binrec(record)) { | |
| if (be32_to_cpu(record->addr) <= fx.max_internal_adress) { | |
| ret = ezusb_writememory(dev, be32_to_cpu(record->addr), | |
| (unsigned char *)record->data, | |
| be16_to_cpu(record->len), WRITE_INT_RAM); | |
| if (ret < 0) { | |
| dev_err(&dev->dev, "%s - ezusb_writememory " | |
| "failed writing external memory " | |
| "(%d %04X %p %d)\n", __func__, ret, | |
| be32_to_cpu(record->addr), record->data, | |
| be16_to_cpu(record->len)); | |
| goto out; | |
| } | |
| } | |
| } | |
| ret = ezusb_set_reset(dev, fx.cpucs_reg, 0); | |
| out: | |
| release_firmware(firmware); | |
| return ret; | |
| } | |
| int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, | |
| const char *firmware_path) | |
| { | |
| return ezusb_ihex_firmware_download(dev, ezusb_fx1, firmware_path); | |
| } | |
| EXPORT_SYMBOL_GPL(ezusb_fx1_ihex_firmware_download); | |
| #if 0 | |
| /* | |
| * Once someone one needs these fx2 functions, uncomment them | |
| * and add them to ezusb.h and all should be good. | |
| */ | |
| static struct ezusb_fx_type ezusb_fx2 = { | |
| .cpucs_reg = 0xE600, | |
| .max_internal_adress = 0x3FFF, | |
| }; | |
| int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit) | |
| { | |
| return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit); | |
| } | |
| EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset); | |
| int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, | |
| const char *firmware_path) | |
| { | |
| return ezusb_ihex_firmware_download(dev, ezusb_fx2, firmware_path); | |
| } | |
| EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download); | |
| #endif | |
| MODULE_LICENSE("GPL"); |