| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Real Time Clock (RTC) Driver for i.MX53 | |
| * Copyright (c) 2004-2011 Freescale Semiconductor, Inc. | |
| * Copyright (c) 2017 Beckhoff Automation GmbH & Co. KG | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/rtc.h> | |
| #define SRTC_LPPDR_INIT 0x41736166 /* init for glitch detect */ | |
| #define SRTC_LPCR_EN_LP BIT(3) /* lp enable */ | |
| #define SRTC_LPCR_WAE BIT(4) /* lp wakeup alarm enable */ | |
| #define SRTC_LPCR_ALP BIT(7) /* lp alarm flag */ | |
| #define SRTC_LPCR_NSA BIT(11) /* lp non secure access */ | |
| #define SRTC_LPCR_NVE BIT(14) /* lp non valid state exit bit */ | |
| #define SRTC_LPCR_IE BIT(15) /* lp init state exit bit */ | |
| #define SRTC_LPSR_ALP BIT(3) /* lp alarm flag */ | |
| #define SRTC_LPSR_NVES BIT(14) /* lp non-valid state exit status */ | |
| #define SRTC_LPSR_IES BIT(15) /* lp init state exit status */ | |
| #define SRTC_LPSCMR 0x00 /* LP Secure Counter MSB Reg */ | |
| #define SRTC_LPSCLR 0x04 /* LP Secure Counter LSB Reg */ | |
| #define SRTC_LPSAR 0x08 /* LP Secure Alarm Reg */ | |
| #define SRTC_LPCR 0x10 /* LP Control Reg */ | |
| #define SRTC_LPSR 0x14 /* LP Status Reg */ | |
| #define SRTC_LPPDR 0x18 /* LP Power Supply Glitch Detector Reg */ | |
| /* max. number of retries to read registers, 120 was max during test */ | |
| #define REG_READ_TIMEOUT 2000 | |
| struct mxc_rtc_data { | |
| struct rtc_device *rtc; | |
| void __iomem *ioaddr; | |
| struct clk *clk; | |
| spinlock_t lock; /* protects register access */ | |
| int irq; | |
| }; | |
| /* | |
| * This function does write synchronization for writes to the lp srtc block. | |
| * To take care of the asynchronous CKIL clock, all writes from the IP domain | |
| * will be synchronized to the CKIL domain. | |
| * The caller should hold the pdata->lock | |
| */ | |
| static void mxc_rtc_sync_lp_locked(struct device *dev, void __iomem *ioaddr) | |
| { | |
| unsigned int i; | |
| /* Wait for 3 CKIL cycles */ | |
| for (i = 0; i < 3; i++) { | |
| const u32 count = readl(ioaddr + SRTC_LPSCLR); | |
| unsigned int timeout = REG_READ_TIMEOUT; | |
| while ((readl(ioaddr + SRTC_LPSCLR)) == count) { | |
| if (!--timeout) { | |
| dev_err_once(dev, "SRTC_LPSCLR stuck! Check your hw.\n"); | |
| return; | |
| } | |
| } | |
| } | |
| } | |
| /* This function is the RTC interrupt service routine. */ | |
| static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id) | |
| { | |
| struct device *dev = dev_id; | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| void __iomem *ioaddr = pdata->ioaddr; | |
| unsigned long flags; | |
| u32 lp_status; | |
| u32 lp_cr; | |
| spin_lock_irqsave(&pdata->lock, flags); | |
| if (clk_enable(pdata->clk)) { | |
| spin_unlock_irqrestore(&pdata->lock, flags); | |
| return IRQ_NONE; | |
| } | |
| lp_status = readl(ioaddr + SRTC_LPSR); | |
| lp_cr = readl(ioaddr + SRTC_LPCR); | |
| /* update irq data & counter */ | |
| if (lp_status & SRTC_LPSR_ALP) { | |
| if (lp_cr & SRTC_LPCR_ALP) | |
| rtc_update_irq(pdata->rtc, 1, RTC_AF | RTC_IRQF); | |
| /* disable further lp alarm interrupts */ | |
| lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE); | |
| } | |
| /* Update interrupt enables */ | |
| writel(lp_cr, ioaddr + SRTC_LPCR); | |
| /* clear interrupt status */ | |
| writel(lp_status, ioaddr + SRTC_LPSR); | |
| mxc_rtc_sync_lp_locked(dev, ioaddr); | |
| clk_disable(pdata->clk); | |
| spin_unlock_irqrestore(&pdata->lock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Enable clk and aquire spinlock | |
| * @return 0 if successful; non-zero otherwise. | |
| */ | |
| static int mxc_rtc_lock(struct mxc_rtc_data *const pdata) | |
| { | |
| int ret; | |
| spin_lock_irq(&pdata->lock); | |
| ret = clk_enable(pdata->clk); | |
| if (ret) { | |
| spin_unlock_irq(&pdata->lock); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int mxc_rtc_unlock(struct mxc_rtc_data *const pdata) | |
| { | |
| clk_disable(pdata->clk); | |
| spin_unlock_irq(&pdata->lock); | |
| return 0; | |
| } | |
| /* | |
| * This function reads the current RTC time into tm in Gregorian date. | |
| * | |
| * @param tm contains the RTC time value upon return | |
| * | |
| * @return 0 if successful; non-zero otherwise. | |
| */ | |
| static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| const int clk_failed = clk_enable(pdata->clk); | |
| if (!clk_failed) { | |
| const time64_t now = readl(pdata->ioaddr + SRTC_LPSCMR); | |
| rtc_time64_to_tm(now, tm); | |
| clk_disable(pdata->clk); | |
| return 0; | |
| } | |
| return clk_failed; | |
| } | |
| /* | |
| * This function sets the internal RTC time based on tm in Gregorian date. | |
| * | |
| * @param tm the time value to be set in the RTC | |
| * | |
| * @return 0 if successful; non-zero otherwise. | |
| */ | |
| static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| time64_t time = rtc_tm_to_time64(tm); | |
| int ret; | |
| ret = mxc_rtc_lock(pdata); | |
| if (ret) | |
| return ret; | |
| writel(time, pdata->ioaddr + SRTC_LPSCMR); | |
| mxc_rtc_sync_lp_locked(dev, pdata->ioaddr); | |
| return mxc_rtc_unlock(pdata); | |
| } | |
| /* | |
| * This function reads the current alarm value into the passed in \b alrm | |
| * argument. It updates the \b alrm's pending field value based on the whether | |
| * an alarm interrupt occurs or not. | |
| * | |
| * @param alrm contains the RTC alarm value upon return | |
| * | |
| * @return 0 if successful; non-zero otherwise. | |
| */ | |
| static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| void __iomem *ioaddr = pdata->ioaddr; | |
| int ret; | |
| ret = mxc_rtc_lock(pdata); | |
| if (ret) | |
| return ret; | |
| rtc_time64_to_tm(readl(ioaddr + SRTC_LPSAR), &alrm->time); | |
| alrm->pending = !!(readl(ioaddr + SRTC_LPSR) & SRTC_LPSR_ALP); | |
| return mxc_rtc_unlock(pdata); | |
| } | |
| /* | |
| * Enable/Disable alarm interrupt | |
| * The caller should hold the pdata->lock | |
| */ | |
| static void mxc_rtc_alarm_irq_enable_locked(struct mxc_rtc_data *pdata, | |
| unsigned int enable) | |
| { | |
| u32 lp_cr = readl(pdata->ioaddr + SRTC_LPCR); | |
| if (enable) | |
| lp_cr |= (SRTC_LPCR_ALP | SRTC_LPCR_WAE); | |
| else | |
| lp_cr &= ~(SRTC_LPCR_ALP | SRTC_LPCR_WAE); | |
| writel(lp_cr, pdata->ioaddr + SRTC_LPCR); | |
| } | |
| static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) | |
| { | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| int ret = mxc_rtc_lock(pdata); | |
| if (ret) | |
| return ret; | |
| mxc_rtc_alarm_irq_enable_locked(pdata, enable); | |
| return mxc_rtc_unlock(pdata); | |
| } | |
| /* | |
| * This function sets the RTC alarm based on passed in alrm. | |
| * | |
| * @param alrm the alarm value to be set in the RTC | |
| * | |
| * @return 0 if successful; non-zero otherwise. | |
| */ | |
| static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| const time64_t time = rtc_tm_to_time64(&alrm->time); | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| int ret = mxc_rtc_lock(pdata); | |
| if (ret) | |
| return ret; | |
| writel((u32)time, pdata->ioaddr + SRTC_LPSAR); | |
| /* clear alarm interrupt status bit */ | |
| writel(SRTC_LPSR_ALP, pdata->ioaddr + SRTC_LPSR); | |
| mxc_rtc_sync_lp_locked(dev, pdata->ioaddr); | |
| mxc_rtc_alarm_irq_enable_locked(pdata, alrm->enabled); | |
| mxc_rtc_sync_lp_locked(dev, pdata->ioaddr); | |
| mxc_rtc_unlock(pdata); | |
| return ret; | |
| } | |
| static const struct rtc_class_ops mxc_rtc_ops = { | |
| .read_time = mxc_rtc_read_time, | |
| .set_time = mxc_rtc_set_time, | |
| .read_alarm = mxc_rtc_read_alarm, | |
| .set_alarm = mxc_rtc_set_alarm, | |
| .alarm_irq_enable = mxc_rtc_alarm_irq_enable, | |
| }; | |
| static int mxc_rtc_wait_for_flag(void __iomem *ioaddr, int flag) | |
| { | |
| unsigned int timeout = REG_READ_TIMEOUT; | |
| while (!(readl(ioaddr) & flag)) { | |
| if (!--timeout) | |
| return -EBUSY; | |
| } | |
| return 0; | |
| } | |
| static int mxc_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct mxc_rtc_data *pdata; | |
| struct resource *res; | |
| void __iomem *ioaddr; | |
| int ret = 0; | |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return -ENOMEM; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(pdata->ioaddr)) | |
| return PTR_ERR(pdata->ioaddr); | |
| ioaddr = pdata->ioaddr; | |
| pdata->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(pdata->clk)) { | |
| dev_err(&pdev->dev, "unable to get rtc clock!\n"); | |
| return PTR_ERR(pdata->clk); | |
| } | |
| spin_lock_init(&pdata->lock); | |
| pdata->irq = platform_get_irq(pdev, 0); | |
| if (pdata->irq < 0) | |
| return pdata->irq; | |
| device_init_wakeup(&pdev->dev, 1); | |
| ret = clk_prepare_enable(pdata->clk); | |
| if (ret) | |
| return ret; | |
| /* initialize glitch detect */ | |
| writel(SRTC_LPPDR_INIT, ioaddr + SRTC_LPPDR); | |
| /* clear lp interrupt status */ | |
| writel(0xFFFFFFFF, ioaddr + SRTC_LPSR); | |
| /* move out of init state */ | |
| writel((SRTC_LPCR_IE | SRTC_LPCR_NSA), ioaddr + SRTC_LPCR); | |
| ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_IES); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_IES\n"); | |
| clk_disable_unprepare(pdata->clk); | |
| return ret; | |
| } | |
| /* move out of non-valid state */ | |
| writel((SRTC_LPCR_IE | SRTC_LPCR_NVE | SRTC_LPCR_NSA | | |
| SRTC_LPCR_EN_LP), ioaddr + SRTC_LPCR); | |
| ret = mxc_rtc_wait_for_flag(ioaddr + SRTC_LPSR, SRTC_LPSR_NVES); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Timeout waiting for SRTC_LPSR_NVES\n"); | |
| clk_disable_unprepare(pdata->clk); | |
| return ret; | |
| } | |
| pdata->rtc = devm_rtc_allocate_device(&pdev->dev); | |
| if (IS_ERR(pdata->rtc)) | |
| return PTR_ERR(pdata->rtc); | |
| pdata->rtc->ops = &mxc_rtc_ops; | |
| pdata->rtc->range_max = U32_MAX; | |
| clk_disable(pdata->clk); | |
| platform_set_drvdata(pdev, pdata); | |
| ret = | |
| devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt, 0, | |
| pdev->name, &pdev->dev); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "interrupt not available.\n"); | |
| clk_unprepare(pdata->clk); | |
| return ret; | |
| } | |
| ret = rtc_register_device(pdata->rtc); | |
| if (ret < 0) | |
| clk_unprepare(pdata->clk); | |
| return ret; | |
| } | |
| static int mxc_rtc_remove(struct platform_device *pdev) | |
| { | |
| struct mxc_rtc_data *pdata = platform_get_drvdata(pdev); | |
| clk_disable_unprepare(pdata->clk); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int mxc_rtc_suspend(struct device *dev) | |
| { | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| if (device_may_wakeup(dev)) | |
| enable_irq_wake(pdata->irq); | |
| return 0; | |
| } | |
| static int mxc_rtc_resume(struct device *dev) | |
| { | |
| struct mxc_rtc_data *pdata = dev_get_drvdata(dev); | |
| if (device_may_wakeup(dev)) | |
| disable_irq_wake(pdata->irq); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume); | |
| static const struct of_device_id mxc_ids[] = { | |
| { .compatible = "fsl,imx53-rtc", }, | |
| {} | |
| }; | |
| static struct platform_driver mxc_rtc_driver = { | |
| .driver = { | |
| .name = "mxc_rtc_v2", | |
| .of_match_table = mxc_ids, | |
| .pm = &mxc_rtc_pm_ops, | |
| }, | |
| .probe = mxc_rtc_probe, | |
| .remove = mxc_rtc_remove, | |
| }; | |
| module_platform_driver(mxc_rtc_driver); | |
| MODULE_AUTHOR("Freescale Semiconductor, Inc."); | |
| MODULE_DESCRIPTION("Real Time Clock (RTC) Driver for i.MX53"); | |
| MODULE_LICENSE("GPL"); |