| /* | |
| * multipath.c : Multiple Devices driver for Linux | |
| * | |
| * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat | |
| * | |
| * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman | |
| * | |
| * MULTIPATH management functions. | |
| * | |
| * derived from raid1.c. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2, or (at your option) | |
| * any later version. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * (for example /usr/src/linux/COPYING); if not, write to the Free | |
| * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/blkdev.h> | |
| #include <linux/module.h> | |
| #include <linux/raid/md_u.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include "md.h" | |
| #include "md-multipath.h" | |
| #define MAX_WORK_PER_DISK 128 | |
| #define NR_RESERVED_BUFS 32 | |
| static int multipath_map (struct mpconf *conf) | |
| { | |
| int i, disks = conf->raid_disks; | |
| /* | |
| * Later we do read balancing on the read side | |
| * now we use the first available disk. | |
| */ | |
| rcu_read_lock(); | |
| for (i = 0; i < disks; i++) { | |
| struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev); | |
| if (rdev && test_bit(In_sync, &rdev->flags) && | |
| !test_bit(Faulty, &rdev->flags)) { | |
| atomic_inc(&rdev->nr_pending); | |
| rcu_read_unlock(); | |
| return i; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| pr_crit_ratelimited("multipath_map(): no more operational IO paths?\n"); | |
| return (-1); | |
| } | |
| static void multipath_reschedule_retry (struct multipath_bh *mp_bh) | |
| { | |
| unsigned long flags; | |
| struct mddev *mddev = mp_bh->mddev; | |
| struct mpconf *conf = mddev->private; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| list_add(&mp_bh->retry_list, &conf->retry_list); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| md_wakeup_thread(mddev->thread); | |
| } | |
| /* | |
| * multipath_end_bh_io() is called when we have finished servicing a multipathed | |
| * operation and are ready to return a success/failure code to the buffer | |
| * cache layer. | |
| */ | |
| static void multipath_end_bh_io(struct multipath_bh *mp_bh, blk_status_t status) | |
| { | |
| struct bio *bio = mp_bh->master_bio; | |
| struct mpconf *conf = mp_bh->mddev->private; | |
| bio->bi_status = status; | |
| bio_endio(bio); | |
| mempool_free(mp_bh, &conf->pool); | |
| } | |
| static void multipath_end_request(struct bio *bio) | |
| { | |
| struct multipath_bh *mp_bh = bio->bi_private; | |
| struct mpconf *conf = mp_bh->mddev->private; | |
| struct md_rdev *rdev = conf->multipaths[mp_bh->path].rdev; | |
| if (!bio->bi_status) | |
| multipath_end_bh_io(mp_bh, 0); | |
| else if (!(bio->bi_opf & REQ_RAHEAD)) { | |
| /* | |
| * oops, IO error: | |
| */ | |
| char b[BDEVNAME_SIZE]; | |
| md_error (mp_bh->mddev, rdev); | |
| pr_info("multipath: %s: rescheduling sector %llu\n", | |
| bdevname(rdev->bdev,b), | |
| (unsigned long long)bio->bi_iter.bi_sector); | |
| multipath_reschedule_retry(mp_bh); | |
| } else | |
| multipath_end_bh_io(mp_bh, bio->bi_status); | |
| rdev_dec_pending(rdev, conf->mddev); | |
| } | |
| static bool multipath_make_request(struct mddev *mddev, struct bio * bio) | |
| { | |
| struct mpconf *conf = mddev->private; | |
| struct multipath_bh * mp_bh; | |
| struct multipath_info *multipath; | |
| if (unlikely(bio->bi_opf & REQ_PREFLUSH)) { | |
| md_flush_request(mddev, bio); | |
| return true; | |
| } | |
| mp_bh = mempool_alloc(&conf->pool, GFP_NOIO); | |
| mp_bh->master_bio = bio; | |
| mp_bh->mddev = mddev; | |
| mp_bh->path = multipath_map(conf); | |
| if (mp_bh->path < 0) { | |
| bio_io_error(bio); | |
| mempool_free(mp_bh, &conf->pool); | |
| return true; | |
| } | |
| multipath = conf->multipaths + mp_bh->path; | |
| bio_init(&mp_bh->bio, NULL, 0); | |
| __bio_clone_fast(&mp_bh->bio, bio); | |
| mp_bh->bio.bi_iter.bi_sector += multipath->rdev->data_offset; | |
| bio_set_dev(&mp_bh->bio, multipath->rdev->bdev); | |
| mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT; | |
| mp_bh->bio.bi_end_io = multipath_end_request; | |
| mp_bh->bio.bi_private = mp_bh; | |
| mddev_check_writesame(mddev, &mp_bh->bio); | |
| mddev_check_write_zeroes(mddev, &mp_bh->bio); | |
| generic_make_request(&mp_bh->bio); | |
| return true; | |
| } | |
| static void multipath_status(struct seq_file *seq, struct mddev *mddev) | |
| { | |
| struct mpconf *conf = mddev->private; | |
| int i; | |
| seq_printf (seq, " [%d/%d] [", conf->raid_disks, | |
| conf->raid_disks - mddev->degraded); | |
| rcu_read_lock(); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev); | |
| seq_printf (seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); | |
| } | |
| rcu_read_unlock(); | |
| seq_putc(seq, ']'); | |
| } | |
| static int multipath_congested(struct mddev *mddev, int bits) | |
| { | |
| struct mpconf *conf = mddev->private; | |
| int i, ret = 0; | |
| rcu_read_lock(); | |
| for (i = 0; i < mddev->raid_disks ; i++) { | |
| struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev); | |
| if (rdev && !test_bit(Faulty, &rdev->flags)) { | |
| struct request_queue *q = bdev_get_queue(rdev->bdev); | |
| ret |= bdi_congested(q->backing_dev_info, bits); | |
| /* Just like multipath_map, we just check the | |
| * first available device | |
| */ | |
| break; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| /* | |
| * Careful, this can execute in IRQ contexts as well! | |
| */ | |
| static void multipath_error (struct mddev *mddev, struct md_rdev *rdev) | |
| { | |
| struct mpconf *conf = mddev->private; | |
| char b[BDEVNAME_SIZE]; | |
| if (conf->raid_disks - mddev->degraded <= 1) { | |
| /* | |
| * Uh oh, we can do nothing if this is our last path, but | |
| * first check if this is a queued request for a device | |
| * which has just failed. | |
| */ | |
| pr_warn("multipath: only one IO path left and IO error.\n"); | |
| /* leave it active... it's all we have */ | |
| return; | |
| } | |
| /* | |
| * Mark disk as unusable | |
| */ | |
| if (test_and_clear_bit(In_sync, &rdev->flags)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| mddev->degraded++; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| } | |
| set_bit(Faulty, &rdev->flags); | |
| set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags); | |
| pr_err("multipath: IO failure on %s, disabling IO path.\n" | |
| "multipath: Operation continuing on %d IO paths.\n", | |
| bdevname(rdev->bdev, b), | |
| conf->raid_disks - mddev->degraded); | |
| } | |
| static void print_multipath_conf (struct mpconf *conf) | |
| { | |
| int i; | |
| struct multipath_info *tmp; | |
| pr_debug("MULTIPATH conf printout:\n"); | |
| if (!conf) { | |
| pr_debug("(conf==NULL)\n"); | |
| return; | |
| } | |
| pr_debug(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded, | |
| conf->raid_disks); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| char b[BDEVNAME_SIZE]; | |
| tmp = conf->multipaths + i; | |
| if (tmp->rdev) | |
| pr_debug(" disk%d, o:%d, dev:%s\n", | |
| i,!test_bit(Faulty, &tmp->rdev->flags), | |
| bdevname(tmp->rdev->bdev,b)); | |
| } | |
| } | |
| static int multipath_add_disk(struct mddev *mddev, struct md_rdev *rdev) | |
| { | |
| struct mpconf *conf = mddev->private; | |
| int err = -EEXIST; | |
| int path; | |
| struct multipath_info *p; | |
| int first = 0; | |
| int last = mddev->raid_disks - 1; | |
| if (rdev->raid_disk >= 0) | |
| first = last = rdev->raid_disk; | |
| print_multipath_conf(conf); | |
| for (path = first; path <= last; path++) | |
| if ((p=conf->multipaths+path)->rdev == NULL) { | |
| disk_stack_limits(mddev->gendisk, rdev->bdev, | |
| rdev->data_offset << 9); | |
| err = md_integrity_add_rdev(rdev, mddev); | |
| if (err) | |
| break; | |
| spin_lock_irq(&conf->device_lock); | |
| mddev->degraded--; | |
| rdev->raid_disk = path; | |
| set_bit(In_sync, &rdev->flags); | |
| spin_unlock_irq(&conf->device_lock); | |
| rcu_assign_pointer(p->rdev, rdev); | |
| err = 0; | |
| break; | |
| } | |
| print_multipath_conf(conf); | |
| return err; | |
| } | |
| static int multipath_remove_disk(struct mddev *mddev, struct md_rdev *rdev) | |
| { | |
| struct mpconf *conf = mddev->private; | |
| int err = 0; | |
| int number = rdev->raid_disk; | |
| struct multipath_info *p = conf->multipaths + number; | |
| print_multipath_conf(conf); | |
| if (rdev == p->rdev) { | |
| if (test_bit(In_sync, &rdev->flags) || | |
| atomic_read(&rdev->nr_pending)) { | |
| pr_warn("hot-remove-disk, slot %d is identified but is still operational!\n", number); | |
| err = -EBUSY; | |
| goto abort; | |
| } | |
| p->rdev = NULL; | |
| if (!test_bit(RemoveSynchronized, &rdev->flags)) { | |
| synchronize_rcu(); | |
| if (atomic_read(&rdev->nr_pending)) { | |
| /* lost the race, try later */ | |
| err = -EBUSY; | |
| p->rdev = rdev; | |
| goto abort; | |
| } | |
| } | |
| err = md_integrity_register(mddev); | |
| } | |
| abort: | |
| print_multipath_conf(conf); | |
| return err; | |
| } | |
| /* | |
| * This is a kernel thread which: | |
| * | |
| * 1. Retries failed read operations on working multipaths. | |
| * 2. Updates the raid superblock when problems encounter. | |
| * 3. Performs writes following reads for array syncronising. | |
| */ | |
| static void multipathd(struct md_thread *thread) | |
| { | |
| struct mddev *mddev = thread->mddev; | |
| struct multipath_bh *mp_bh; | |
| struct bio *bio; | |
| unsigned long flags; | |
| struct mpconf *conf = mddev->private; | |
| struct list_head *head = &conf->retry_list; | |
| md_check_recovery(mddev); | |
| for (;;) { | |
| char b[BDEVNAME_SIZE]; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (list_empty(head)) | |
| break; | |
| mp_bh = list_entry(head->prev, struct multipath_bh, retry_list); | |
| list_del(head->prev); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| bio = &mp_bh->bio; | |
| bio->bi_iter.bi_sector = mp_bh->master_bio->bi_iter.bi_sector; | |
| if ((mp_bh->path = multipath_map (conf))<0) { | |
| pr_err("multipath: %s: unrecoverable IO read error for block %llu\n", | |
| bio_devname(bio, b), | |
| (unsigned long long)bio->bi_iter.bi_sector); | |
| multipath_end_bh_io(mp_bh, BLK_STS_IOERR); | |
| } else { | |
| pr_err("multipath: %s: redirecting sector %llu to another IO path\n", | |
| bio_devname(bio, b), | |
| (unsigned long long)bio->bi_iter.bi_sector); | |
| *bio = *(mp_bh->master_bio); | |
| bio->bi_iter.bi_sector += | |
| conf->multipaths[mp_bh->path].rdev->data_offset; | |
| bio_set_dev(bio, conf->multipaths[mp_bh->path].rdev->bdev); | |
| bio->bi_opf |= REQ_FAILFAST_TRANSPORT; | |
| bio->bi_end_io = multipath_end_request; | |
| bio->bi_private = mp_bh; | |
| generic_make_request(bio); | |
| } | |
| } | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| } | |
| static sector_t multipath_size(struct mddev *mddev, sector_t sectors, int raid_disks) | |
| { | |
| WARN_ONCE(sectors || raid_disks, | |
| "%s does not support generic reshape\n", __func__); | |
| return mddev->dev_sectors; | |
| } | |
| static int multipath_run (struct mddev *mddev) | |
| { | |
| struct mpconf *conf; | |
| int disk_idx; | |
| struct multipath_info *disk; | |
| struct md_rdev *rdev; | |
| int working_disks; | |
| int ret; | |
| if (md_check_no_bitmap(mddev)) | |
| return -EINVAL; | |
| if (mddev->level != LEVEL_MULTIPATH) { | |
| pr_warn("multipath: %s: raid level not set to multipath IO (%d)\n", | |
| mdname(mddev), mddev->level); | |
| goto out; | |
| } | |
| /* | |
| * copy the already verified devices into our private MULTIPATH | |
| * bookkeeping area. [whatever we allocate in multipath_run(), | |
| * should be freed in multipath_free()] | |
| */ | |
| conf = kzalloc(sizeof(struct mpconf), GFP_KERNEL); | |
| mddev->private = conf; | |
| if (!conf) | |
| goto out; | |
| conf->multipaths = kcalloc(mddev->raid_disks, | |
| sizeof(struct multipath_info), | |
| GFP_KERNEL); | |
| if (!conf->multipaths) | |
| goto out_free_conf; | |
| working_disks = 0; | |
| rdev_for_each(rdev, mddev) { | |
| disk_idx = rdev->raid_disk; | |
| if (disk_idx < 0 || | |
| disk_idx >= mddev->raid_disks) | |
| continue; | |
| disk = conf->multipaths + disk_idx; | |
| disk->rdev = rdev; | |
| disk_stack_limits(mddev->gendisk, rdev->bdev, | |
| rdev->data_offset << 9); | |
| if (!test_bit(Faulty, &rdev->flags)) | |
| working_disks++; | |
| } | |
| conf->raid_disks = mddev->raid_disks; | |
| conf->mddev = mddev; | |
| spin_lock_init(&conf->device_lock); | |
| INIT_LIST_HEAD(&conf->retry_list); | |
| if (!working_disks) { | |
| pr_warn("multipath: no operational IO paths for %s\n", | |
| mdname(mddev)); | |
| goto out_free_conf; | |
| } | |
| mddev->degraded = conf->raid_disks - working_disks; | |
| ret = mempool_init_kmalloc_pool(&conf->pool, NR_RESERVED_BUFS, | |
| sizeof(struct multipath_bh)); | |
| if (ret) | |
| goto out_free_conf; | |
| mddev->thread = md_register_thread(multipathd, mddev, | |
| "multipath"); | |
| if (!mddev->thread) | |
| goto out_free_conf; | |
| pr_info("multipath: array %s active with %d out of %d IO paths\n", | |
| mdname(mddev), conf->raid_disks - mddev->degraded, | |
| mddev->raid_disks); | |
| /* | |
| * Ok, everything is just fine now | |
| */ | |
| md_set_array_sectors(mddev, multipath_size(mddev, 0, 0)); | |
| if (md_integrity_register(mddev)) | |
| goto out_free_conf; | |
| return 0; | |
| out_free_conf: | |
| mempool_exit(&conf->pool); | |
| kfree(conf->multipaths); | |
| kfree(conf); | |
| mddev->private = NULL; | |
| out: | |
| return -EIO; | |
| } | |
| static void multipath_free(struct mddev *mddev, void *priv) | |
| { | |
| struct mpconf *conf = priv; | |
| mempool_exit(&conf->pool); | |
| kfree(conf->multipaths); | |
| kfree(conf); | |
| } | |
| static struct md_personality multipath_personality = | |
| { | |
| .name = "multipath", | |
| .level = LEVEL_MULTIPATH, | |
| .owner = THIS_MODULE, | |
| .make_request = multipath_make_request, | |
| .run = multipath_run, | |
| .free = multipath_free, | |
| .status = multipath_status, | |
| .error_handler = multipath_error, | |
| .hot_add_disk = multipath_add_disk, | |
| .hot_remove_disk= multipath_remove_disk, | |
| .size = multipath_size, | |
| .congested = multipath_congested, | |
| }; | |
| static int __init multipath_init (void) | |
| { | |
| return register_md_personality (&multipath_personality); | |
| } | |
| static void __exit multipath_exit (void) | |
| { | |
| unregister_md_personality (&multipath_personality); | |
| } | |
| module_init(multipath_init); | |
| module_exit(multipath_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("simple multi-path personality for MD"); | |
| MODULE_ALIAS("md-personality-7"); /* MULTIPATH */ | |
| MODULE_ALIAS("md-multipath"); | |
| MODULE_ALIAS("md-level--4"); |