| /* | |
| * Touchscreen driver for Dialog Semiconductor DA9034 | |
| * | |
| * Copyright (C) 2006-2008 Marvell International Ltd. | |
| * Fengwei Yin <fengwei.yin@marvell.com> | |
| * Bin Yang <bin.yang@marvell.com> | |
| * Eric Miao <eric.miao@marvell.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/input.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/mfd/da903x.h> | |
| #include <linux/slab.h> | |
| #define DA9034_MANUAL_CTRL 0x50 | |
| #define DA9034_LDO_ADC_EN (1 << 4) | |
| #define DA9034_AUTO_CTRL1 0x51 | |
| #define DA9034_AUTO_CTRL2 0x52 | |
| #define DA9034_AUTO_TSI_EN (1 << 3) | |
| #define DA9034_PEN_DETECT (1 << 4) | |
| #define DA9034_TSI_CTRL1 0x53 | |
| #define DA9034_TSI_CTRL2 0x54 | |
| #define DA9034_TSI_X_MSB 0x6c | |
| #define DA9034_TSI_Y_MSB 0x6d | |
| #define DA9034_TSI_XY_LSB 0x6e | |
| enum { | |
| STATE_IDLE, /* wait for pendown */ | |
| STATE_BUSY, /* TSI busy sampling */ | |
| STATE_STOP, /* sample available */ | |
| STATE_WAIT, /* Wait to start next sample */ | |
| }; | |
| enum { | |
| EVENT_PEN_DOWN, | |
| EVENT_PEN_UP, | |
| EVENT_TSI_READY, | |
| EVENT_TIMEDOUT, | |
| }; | |
| struct da9034_touch { | |
| struct device *da9034_dev; | |
| struct input_dev *input_dev; | |
| struct delayed_work tsi_work; | |
| struct notifier_block notifier; | |
| int state; | |
| int interval_ms; | |
| int x_inverted; | |
| int y_inverted; | |
| int last_x; | |
| int last_y; | |
| }; | |
| static inline int is_pen_down(struct da9034_touch *touch) | |
| { | |
| return da903x_query_status(touch->da9034_dev, DA9034_STATUS_PEN_DOWN); | |
| } | |
| static inline int detect_pen_down(struct da9034_touch *touch, int on) | |
| { | |
| if (on) | |
| return da903x_set_bits(touch->da9034_dev, | |
| DA9034_AUTO_CTRL2, DA9034_PEN_DETECT); | |
| else | |
| return da903x_clr_bits(touch->da9034_dev, | |
| DA9034_AUTO_CTRL2, DA9034_PEN_DETECT); | |
| } | |
| static int read_tsi(struct da9034_touch *touch) | |
| { | |
| uint8_t _x, _y, _v; | |
| int ret; | |
| ret = da903x_read(touch->da9034_dev, DA9034_TSI_X_MSB, &_x); | |
| if (ret) | |
| return ret; | |
| ret = da903x_read(touch->da9034_dev, DA9034_TSI_Y_MSB, &_y); | |
| if (ret) | |
| return ret; | |
| ret = da903x_read(touch->da9034_dev, DA9034_TSI_XY_LSB, &_v); | |
| if (ret) | |
| return ret; | |
| touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3); | |
| touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2); | |
| return 0; | |
| } | |
| static inline int start_tsi(struct da9034_touch *touch) | |
| { | |
| return da903x_set_bits(touch->da9034_dev, | |
| DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN); | |
| } | |
| static inline int stop_tsi(struct da9034_touch *touch) | |
| { | |
| return da903x_clr_bits(touch->da9034_dev, | |
| DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN); | |
| } | |
| static inline void report_pen_down(struct da9034_touch *touch) | |
| { | |
| int x = touch->last_x; | |
| int y = touch->last_y; | |
| x &= 0xfff; | |
| if (touch->x_inverted) | |
| x = 1024 - x; | |
| y &= 0xfff; | |
| if (touch->y_inverted) | |
| y = 1024 - y; | |
| input_report_abs(touch->input_dev, ABS_X, x); | |
| input_report_abs(touch->input_dev, ABS_Y, y); | |
| input_report_key(touch->input_dev, BTN_TOUCH, 1); | |
| input_sync(touch->input_dev); | |
| } | |
| static inline void report_pen_up(struct da9034_touch *touch) | |
| { | |
| input_report_key(touch->input_dev, BTN_TOUCH, 0); | |
| input_sync(touch->input_dev); | |
| } | |
| static void da9034_event_handler(struct da9034_touch *touch, int event) | |
| { | |
| int err; | |
| switch (touch->state) { | |
| case STATE_IDLE: | |
| if (event != EVENT_PEN_DOWN) | |
| break; | |
| /* Enable auto measurement of the TSI, this will | |
| * automatically disable pen down detection | |
| */ | |
| err = start_tsi(touch); | |
| if (err) | |
| goto err_reset; | |
| touch->state = STATE_BUSY; | |
| break; | |
| case STATE_BUSY: | |
| if (event != EVENT_TSI_READY) | |
| break; | |
| err = read_tsi(touch); | |
| if (err) | |
| goto err_reset; | |
| /* Disable auto measurement of the TSI, so that | |
| * pen down status will be available | |
| */ | |
| err = stop_tsi(touch); | |
| if (err) | |
| goto err_reset; | |
| touch->state = STATE_STOP; | |
| /* FIXME: PEN_{UP/DOWN} events are expected to be | |
| * available by stopping TSI, but this is found not | |
| * always true, delay and simulate such an event | |
| * here is more reliable | |
| */ | |
| mdelay(1); | |
| da9034_event_handler(touch, | |
| is_pen_down(touch) ? EVENT_PEN_DOWN : | |
| EVENT_PEN_UP); | |
| break; | |
| case STATE_STOP: | |
| if (event == EVENT_PEN_DOWN) { | |
| report_pen_down(touch); | |
| schedule_delayed_work(&touch->tsi_work, | |
| msecs_to_jiffies(touch->interval_ms)); | |
| touch->state = STATE_WAIT; | |
| } | |
| if (event == EVENT_PEN_UP) { | |
| report_pen_up(touch); | |
| touch->state = STATE_IDLE; | |
| } | |
| break; | |
| case STATE_WAIT: | |
| if (event != EVENT_TIMEDOUT) | |
| break; | |
| if (is_pen_down(touch)) { | |
| start_tsi(touch); | |
| touch->state = STATE_BUSY; | |
| } else { | |
| report_pen_up(touch); | |
| touch->state = STATE_IDLE; | |
| } | |
| break; | |
| } | |
| return; | |
| err_reset: | |
| touch->state = STATE_IDLE; | |
| stop_tsi(touch); | |
| detect_pen_down(touch, 1); | |
| } | |
| static void da9034_tsi_work(struct work_struct *work) | |
| { | |
| struct da9034_touch *touch = | |
| container_of(work, struct da9034_touch, tsi_work.work); | |
| da9034_event_handler(touch, EVENT_TIMEDOUT); | |
| } | |
| static int da9034_touch_notifier(struct notifier_block *nb, | |
| unsigned long event, void *data) | |
| { | |
| struct da9034_touch *touch = | |
| container_of(nb, struct da9034_touch, notifier); | |
| if (event & DA9034_EVENT_TSI_READY) | |
| da9034_event_handler(touch, EVENT_TSI_READY); | |
| if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE) | |
| da9034_event_handler(touch, EVENT_PEN_DOWN); | |
| return 0; | |
| } | |
| static int da9034_touch_open(struct input_dev *dev) | |
| { | |
| struct da9034_touch *touch = input_get_drvdata(dev); | |
| int ret; | |
| ret = da903x_register_notifier(touch->da9034_dev, &touch->notifier, | |
| DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY); | |
| if (ret) | |
| return -EBUSY; | |
| /* Enable ADC LDO */ | |
| ret = da903x_set_bits(touch->da9034_dev, | |
| DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN); | |
| if (ret) | |
| return ret; | |
| /* TSI_DELAY: 3 slots, TSI_SKIP: 3 slots */ | |
| ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL1, 0x1b); | |
| if (ret) | |
| return ret; | |
| ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL2, 0x00); | |
| if (ret) | |
| return ret; | |
| touch->state = STATE_IDLE; | |
| detect_pen_down(touch, 1); | |
| return 0; | |
| } | |
| static void da9034_touch_close(struct input_dev *dev) | |
| { | |
| struct da9034_touch *touch = input_get_drvdata(dev); | |
| da903x_unregister_notifier(touch->da9034_dev, &touch->notifier, | |
| DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY); | |
| cancel_delayed_work_sync(&touch->tsi_work); | |
| touch->state = STATE_IDLE; | |
| stop_tsi(touch); | |
| detect_pen_down(touch, 0); | |
| /* Disable ADC LDO */ | |
| da903x_clr_bits(touch->da9034_dev, | |
| DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN); | |
| } | |
| static int da9034_touch_probe(struct platform_device *pdev) | |
| { | |
| struct da9034_touch_pdata *pdata = dev_get_platdata(&pdev->dev); | |
| struct da9034_touch *touch; | |
| struct input_dev *input_dev; | |
| int error; | |
| touch = devm_kzalloc(&pdev->dev, sizeof(struct da9034_touch), | |
| GFP_KERNEL); | |
| if (!touch) { | |
| dev_err(&pdev->dev, "failed to allocate driver data\n"); | |
| return -ENOMEM; | |
| } | |
| touch->da9034_dev = pdev->dev.parent; | |
| if (pdata) { | |
| touch->interval_ms = pdata->interval_ms; | |
| touch->x_inverted = pdata->x_inverted; | |
| touch->y_inverted = pdata->y_inverted; | |
| } else { | |
| /* fallback into default */ | |
| touch->interval_ms = 10; | |
| } | |
| INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work); | |
| touch->notifier.notifier_call = da9034_touch_notifier; | |
| input_dev = devm_input_allocate_device(&pdev->dev); | |
| if (!input_dev) { | |
| dev_err(&pdev->dev, "failed to allocate input device\n"); | |
| return -ENOMEM; | |
| } | |
| input_dev->name = pdev->name; | |
| input_dev->open = da9034_touch_open; | |
| input_dev->close = da9034_touch_close; | |
| input_dev->dev.parent = &pdev->dev; | |
| __set_bit(EV_ABS, input_dev->evbit); | |
| __set_bit(ABS_X, input_dev->absbit); | |
| __set_bit(ABS_Y, input_dev->absbit); | |
| input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); | |
| input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); | |
| __set_bit(EV_KEY, input_dev->evbit); | |
| __set_bit(BTN_TOUCH, input_dev->keybit); | |
| touch->input_dev = input_dev; | |
| input_set_drvdata(input_dev, touch); | |
| error = input_register_device(input_dev); | |
| if (error) | |
| return error; | |
| return 0; | |
| } | |
| static struct platform_driver da9034_touch_driver = { | |
| .driver = { | |
| .name = "da9034-touch", | |
| }, | |
| .probe = da9034_touch_probe, | |
| }; | |
| module_platform_driver(da9034_touch_driver); | |
| MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); | |
| MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:da9034-touch"); |