| /* | |
| * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> | |
| * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com> | |
| * | |
| * This is a look-alike variation of the ICH0 PIIX4 Ultra-66, | |
| * but this keeps the ISA-Bridge and slots alive. | |
| * | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/ide.h> | |
| #include <linux/init.h> | |
| #define DRV_NAME "slc90e66" | |
| static DEFINE_SPINLOCK(slc90e66_lock); | |
| static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) | |
| { | |
| struct pci_dev *dev = to_pci_dev(hwif->dev); | |
| int is_slave = drive->dn & 1; | |
| int master_port = hwif->channel ? 0x42 : 0x40; | |
| int slave_port = 0x44; | |
| unsigned long flags; | |
| u16 master_data; | |
| u8 slave_data; | |
| int control = 0; | |
| const u8 pio = drive->pio_mode - XFER_PIO_0; | |
| /* ISP RTC */ | |
| static const u8 timings[][2] = { | |
| { 0, 0 }, | |
| { 0, 0 }, | |
| { 1, 0 }, | |
| { 2, 1 }, | |
| { 2, 3 }, }; | |
| spin_lock_irqsave(&slc90e66_lock, flags); | |
| pci_read_config_word(dev, master_port, &master_data); | |
| if (pio > 1) | |
| control |= 1; /* Programmable timing on */ | |
| if (drive->media == ide_disk) | |
| control |= 4; /* Prefetch, post write */ | |
| if (ide_pio_need_iordy(drive, pio)) | |
| control |= 2; /* IORDY */ | |
| if (is_slave) { | |
| master_data |= 0x4000; | |
| master_data &= ~0x0070; | |
| if (pio > 1) { | |
| /* Set PPE, IE and TIME */ | |
| master_data |= control << 4; | |
| } | |
| pci_read_config_byte(dev, slave_port, &slave_data); | |
| slave_data &= hwif->channel ? 0x0f : 0xf0; | |
| slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << | |
| (hwif->channel ? 4 : 0); | |
| } else { | |
| master_data &= ~0x3307; | |
| if (pio > 1) { | |
| /* enable PPE, IE and TIME */ | |
| master_data |= control; | |
| } | |
| master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); | |
| } | |
| pci_write_config_word(dev, master_port, master_data); | |
| if (is_slave) | |
| pci_write_config_byte(dev, slave_port, slave_data); | |
| spin_unlock_irqrestore(&slc90e66_lock, flags); | |
| } | |
| static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) | |
| { | |
| struct pci_dev *dev = to_pci_dev(hwif->dev); | |
| u8 maslave = hwif->channel ? 0x42 : 0x40; | |
| int sitre = 0, a_speed = 7 << (drive->dn * 4); | |
| int u_speed = 0, u_flag = 1 << drive->dn; | |
| u16 reg4042, reg44, reg48, reg4a; | |
| const u8 speed = drive->dma_mode; | |
| pci_read_config_word(dev, maslave, ®4042); | |
| sitre = (reg4042 & 0x4000) ? 1 : 0; | |
| pci_read_config_word(dev, 0x44, ®44); | |
| pci_read_config_word(dev, 0x48, ®48); | |
| pci_read_config_word(dev, 0x4a, ®4a); | |
| if (speed >= XFER_UDMA_0) { | |
| u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4); | |
| if (!(reg48 & u_flag)) | |
| pci_write_config_word(dev, 0x48, reg48|u_flag); | |
| if ((reg4a & a_speed) != u_speed) { | |
| pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); | |
| pci_read_config_word(dev, 0x4a, ®4a); | |
| pci_write_config_word(dev, 0x4a, reg4a|u_speed); | |
| } | |
| } else { | |
| const u8 mwdma_to_pio[] = { 0, 3, 4 }; | |
| if (reg48 & u_flag) | |
| pci_write_config_word(dev, 0x48, reg48 & ~u_flag); | |
| if (reg4a & a_speed) | |
| pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); | |
| if (speed >= XFER_MW_DMA_0) | |
| drive->pio_mode = | |
| mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; | |
| else | |
| drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ | |
| slc90e66_set_pio_mode(hwif, drive); | |
| } | |
| } | |
| static u8 slc90e66_cable_detect(ide_hwif_t *hwif) | |
| { | |
| struct pci_dev *dev = to_pci_dev(hwif->dev); | |
| u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02; | |
| pci_read_config_byte(dev, 0x47, ®47); | |
| /* bit[0(1)]: 0:80, 1:40 */ | |
| return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; | |
| } | |
| static const struct ide_port_ops slc90e66_port_ops = { | |
| .set_pio_mode = slc90e66_set_pio_mode, | |
| .set_dma_mode = slc90e66_set_dma_mode, | |
| .cable_detect = slc90e66_cable_detect, | |
| }; | |
| static const struct ide_port_info slc90e66_chipset = { | |
| .name = DRV_NAME, | |
| .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, | |
| .port_ops = &slc90e66_port_ops, | |
| .pio_mask = ATA_PIO4, | |
| .swdma_mask = ATA_SWDMA2_ONLY, | |
| .mwdma_mask = ATA_MWDMA12_ONLY, | |
| .udma_mask = ATA_UDMA4, | |
| }; | |
| static int slc90e66_init_one(struct pci_dev *dev, | |
| const struct pci_device_id *id) | |
| { | |
| return ide_pci_init_one(dev, &slc90e66_chipset, NULL); | |
| } | |
| static const struct pci_device_id slc90e66_pci_tbl[] = { | |
| { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 }, | |
| { 0, }, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl); | |
| static struct pci_driver slc90e66_pci_driver = { | |
| .name = "SLC90e66_IDE", | |
| .id_table = slc90e66_pci_tbl, | |
| .probe = slc90e66_init_one, | |
| .remove = ide_pci_remove, | |
| .suspend = ide_pci_suspend, | |
| .resume = ide_pci_resume, | |
| }; | |
| static int __init slc90e66_ide_init(void) | |
| { | |
| return ide_pci_register_driver(&slc90e66_pci_driver); | |
| } | |
| static void __exit slc90e66_ide_exit(void) | |
| { | |
| pci_unregister_driver(&slc90e66_pci_driver); | |
| } | |
| module_init(slc90e66_ide_init); | |
| module_exit(slc90e66_ide_exit); | |
| MODULE_AUTHOR("Andre Hedrick"); | |
| MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE"); | |
| MODULE_LICENSE("GPL"); |