| /* | |
| * ATAPI support. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/cdrom.h> | |
| #include <linux/delay.h> | |
| #include <linux/export.h> | |
| #include <linux/ide.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/gfp.h> | |
| #include <scsi/scsi.h> | |
| #define DRV_NAME "ide-atapi" | |
| #define PFX DRV_NAME ": " | |
| #ifdef DEBUG | |
| #define debug_log(fmt, args...) \ | |
| printk(KERN_INFO "ide: " fmt, ## args) | |
| #else | |
| #define debug_log(fmt, args...) do {} while (0) | |
| #endif | |
| #define ATAPI_MIN_CDB_BYTES 12 | |
| static inline int dev_is_idecd(ide_drive_t *drive) | |
| { | |
| return drive->media == ide_cdrom || drive->media == ide_optical; | |
| } | |
| /* | |
| * Check whether we can support a device, | |
| * based on the ATAPI IDENTIFY command results. | |
| */ | |
| int ide_check_atapi_device(ide_drive_t *drive, const char *s) | |
| { | |
| u16 *id = drive->id; | |
| u8 gcw[2], protocol, device_type, removable, drq_type, packet_size; | |
| *((u16 *)&gcw) = id[ATA_ID_CONFIG]; | |
| protocol = (gcw[1] & 0xC0) >> 6; | |
| device_type = gcw[1] & 0x1F; | |
| removable = (gcw[0] & 0x80) >> 7; | |
| drq_type = (gcw[0] & 0x60) >> 5; | |
| packet_size = gcw[0] & 0x03; | |
| #ifdef CONFIG_PPC | |
| /* kludge for Apple PowerBook internal zip */ | |
| if (drive->media == ide_floppy && device_type == 5 && | |
| !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") && | |
| strstr((char *)&id[ATA_ID_PROD], "ZIP")) | |
| device_type = 0; | |
| #endif | |
| if (protocol != 2) | |
| printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", | |
| s, drive->name, protocol); | |
| else if ((drive->media == ide_floppy && device_type != 0) || | |
| (drive->media == ide_tape && device_type != 1)) | |
| printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", | |
| s, drive->name, device_type); | |
| else if (removable == 0) | |
| printk(KERN_ERR "%s: %s: the removable flag is not set\n", | |
| s, drive->name); | |
| else if (drive->media == ide_floppy && drq_type == 3) | |
| printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " | |
| "supported\n", s, drive->name, drq_type); | |
| else if (packet_size != 0) | |
| printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " | |
| "bytes\n", s, drive->name, packet_size); | |
| else | |
| return 1; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_check_atapi_device); | |
| void ide_init_pc(struct ide_atapi_pc *pc) | |
| { | |
| memset(pc, 0, sizeof(*pc)); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_init_pc); | |
| /* | |
| * Add a special packet command request to the tail of the request queue, | |
| * and wait for it to be serviced. | |
| */ | |
| int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, | |
| struct ide_atapi_pc *pc, void *buf, unsigned int bufflen) | |
| { | |
| struct request *rq; | |
| int error; | |
| rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0); | |
| ide_req(rq)->type = ATA_PRIV_MISC; | |
| rq->special = (char *)pc; | |
| if (buf && bufflen) { | |
| error = blk_rq_map_kern(drive->queue, rq, buf, bufflen, | |
| GFP_NOIO); | |
| if (error) | |
| goto put_req; | |
| } | |
| memcpy(scsi_req(rq)->cmd, pc->c, 12); | |
| if (drive->media == ide_tape) | |
| scsi_req(rq)->cmd[13] = REQ_IDETAPE_PC1; | |
| blk_execute_rq(drive->queue, disk, rq, 0); | |
| error = scsi_req(rq)->result ? -EIO : 0; | |
| put_req: | |
| blk_put_request(rq); | |
| return error; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_queue_pc_tail); | |
| int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk) | |
| { | |
| struct ide_atapi_pc pc; | |
| ide_init_pc(&pc); | |
| pc.c[0] = TEST_UNIT_READY; | |
| return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_do_test_unit_ready); | |
| int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start) | |
| { | |
| struct ide_atapi_pc pc; | |
| ide_init_pc(&pc); | |
| pc.c[0] = START_STOP; | |
| pc.c[4] = start; | |
| if (drive->media == ide_tape) | |
| pc.flags |= PC_FLAG_WAIT_FOR_DSC; | |
| return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_do_start_stop); | |
| int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on) | |
| { | |
| struct ide_atapi_pc pc; | |
| if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) | |
| return 0; | |
| ide_init_pc(&pc); | |
| pc.c[0] = ALLOW_MEDIUM_REMOVAL; | |
| pc.c[4] = on; | |
| return ide_queue_pc_tail(drive, disk, &pc, NULL, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_set_media_lock); | |
| void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) | |
| { | |
| ide_init_pc(pc); | |
| pc->c[0] = REQUEST_SENSE; | |
| if (drive->media == ide_floppy) { | |
| pc->c[4] = 255; | |
| pc->req_xfer = 18; | |
| } else { | |
| pc->c[4] = 20; | |
| pc->req_xfer = 20; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); | |
| void ide_prep_sense(ide_drive_t *drive, struct request *rq) | |
| { | |
| struct request_sense *sense = &drive->sense_data; | |
| struct request *sense_rq = drive->sense_rq; | |
| struct scsi_request *req = scsi_req(sense_rq); | |
| unsigned int cmd_len, sense_len; | |
| int err; | |
| switch (drive->media) { | |
| case ide_floppy: | |
| cmd_len = 255; | |
| sense_len = 18; | |
| break; | |
| case ide_tape: | |
| cmd_len = 20; | |
| sense_len = 20; | |
| break; | |
| default: | |
| cmd_len = 18; | |
| sense_len = 18; | |
| } | |
| BUG_ON(sense_len > sizeof(*sense)); | |
| if (ata_sense_request(rq) || drive->sense_rq_armed) | |
| return; | |
| memset(sense, 0, sizeof(*sense)); | |
| blk_rq_init(rq->q, sense_rq); | |
| scsi_req_init(req); | |
| err = blk_rq_map_kern(drive->queue, sense_rq, sense, sense_len, | |
| GFP_NOIO); | |
| if (unlikely(err)) { | |
| if (printk_ratelimit()) | |
| printk(KERN_WARNING PFX "%s: failed to map sense " | |
| "buffer\n", drive->name); | |
| return; | |
| } | |
| sense_rq->rq_disk = rq->rq_disk; | |
| sense_rq->cmd_flags = REQ_OP_DRV_IN; | |
| ide_req(sense_rq)->type = ATA_PRIV_SENSE; | |
| sense_rq->rq_flags |= RQF_PREEMPT; | |
| req->cmd[0] = GPCMD_REQUEST_SENSE; | |
| req->cmd[4] = cmd_len; | |
| if (drive->media == ide_tape) | |
| req->cmd[13] = REQ_IDETAPE_PC1; | |
| drive->sense_rq_armed = true; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_prep_sense); | |
| int ide_queue_sense_rq(ide_drive_t *drive, void *special) | |
| { | |
| /* deferred failure from ide_prep_sense() */ | |
| if (!drive->sense_rq_armed) { | |
| printk(KERN_WARNING PFX "%s: error queuing a sense request\n", | |
| drive->name); | |
| return -ENOMEM; | |
| } | |
| drive->sense_rq->special = special; | |
| drive->sense_rq_armed = false; | |
| drive->hwif->rq = NULL; | |
| elv_add_request(drive->queue, drive->sense_rq, ELEVATOR_INSERT_FRONT); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_queue_sense_rq); | |
| /* | |
| * Called when an error was detected during the last packet command. | |
| * We queue a request sense packet command at the head of the request | |
| * queue. | |
| */ | |
| void ide_retry_pc(ide_drive_t *drive) | |
| { | |
| struct request *failed_rq = drive->hwif->rq; | |
| struct request *sense_rq = drive->sense_rq; | |
| struct ide_atapi_pc *pc = &drive->request_sense_pc; | |
| (void)ide_read_error(drive); | |
| /* init pc from sense_rq */ | |
| ide_init_pc(pc); | |
| memcpy(pc->c, scsi_req(sense_rq)->cmd, 12); | |
| if (drive->media == ide_tape) | |
| drive->atapi_flags |= IDE_AFLAG_IGNORE_DSC; | |
| /* | |
| * Push back the failed request and put request sense on top | |
| * of it. The failed command will be retried after sense data | |
| * is acquired. | |
| */ | |
| drive->hwif->rq = NULL; | |
| ide_requeue_and_plug(drive, failed_rq); | |
| if (ide_queue_sense_rq(drive, pc)) { | |
| blk_start_request(failed_rq); | |
| ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(failed_rq)); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ide_retry_pc); | |
| int ide_cd_expiry(ide_drive_t *drive) | |
| { | |
| struct request *rq = drive->hwif->rq; | |
| unsigned long wait = 0; | |
| debug_log("%s: scsi_req(rq)->cmd[0]: 0x%x\n", __func__, scsi_req(rq)->cmd[0]); | |
| /* | |
| * Some commands are *slow* and normally take a long time to complete. | |
| * Usually we can use the ATAPI "disconnect" to bypass this, but not all | |
| * commands/drives support that. Let ide_timer_expiry keep polling us | |
| * for these. | |
| */ | |
| switch (scsi_req(rq)->cmd[0]) { | |
| case GPCMD_BLANK: | |
| case GPCMD_FORMAT_UNIT: | |
| case GPCMD_RESERVE_RZONE_TRACK: | |
| case GPCMD_CLOSE_TRACK: | |
| case GPCMD_FLUSH_CACHE: | |
| wait = ATAPI_WAIT_PC; | |
| break; | |
| default: | |
| if (!(rq->rq_flags & RQF_QUIET)) | |
| printk(KERN_INFO PFX "cmd 0x%x timed out\n", | |
| scsi_req(rq)->cmd[0]); | |
| wait = 0; | |
| break; | |
| } | |
| return wait; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_cd_expiry); | |
| int ide_cd_get_xferlen(struct request *rq) | |
| { | |
| switch (req_op(rq)) { | |
| default: | |
| return 32768; | |
| case REQ_OP_SCSI_IN: | |
| case REQ_OP_SCSI_OUT: | |
| return blk_rq_bytes(rq); | |
| case REQ_OP_DRV_IN: | |
| case REQ_OP_DRV_OUT: | |
| switch (ide_req(rq)->type) { | |
| case ATA_PRIV_PC: | |
| case ATA_PRIV_SENSE: | |
| return blk_rq_bytes(rq); | |
| default: | |
| return 0; | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); | |
| void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) | |
| { | |
| struct ide_taskfile tf; | |
| drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT | | |
| IDE_VALID_LBAM | IDE_VALID_LBAH); | |
| *bcount = (tf.lbah << 8) | tf.lbam; | |
| *ireason = tf.nsect & 3; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); | |
| /* | |
| * Check the contents of the interrupt reason register and attempt to recover if | |
| * there are problems. | |
| * | |
| * Returns: | |
| * - 0 if everything's ok | |
| * - 1 if the request has to be terminated. | |
| */ | |
| int ide_check_ireason(ide_drive_t *drive, struct request *rq, int len, | |
| int ireason, int rw) | |
| { | |
| ide_hwif_t *hwif = drive->hwif; | |
| debug_log("ireason: 0x%x, rw: 0x%x\n", ireason, rw); | |
| if (ireason == (!rw << 1)) | |
| return 0; | |
| else if (ireason == (rw << 1)) { | |
| printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n", | |
| drive->name, __func__); | |
| if (dev_is_idecd(drive)) | |
| ide_pad_transfer(drive, rw, len); | |
| } else if (!rw && ireason == ATAPI_COD) { | |
| if (dev_is_idecd(drive)) { | |
| /* | |
| * Some drives (ASUS) seem to tell us that status info | |
| * is available. Just get it and ignore. | |
| */ | |
| (void)hwif->tp_ops->read_status(hwif); | |
| return 0; | |
| } | |
| } else { | |
| if (ireason & ATAPI_COD) | |
| printk(KERN_ERR PFX "%s: CoD != 0 in %s\n", drive->name, | |
| __func__); | |
| /* drive wants a command packet, or invalid ireason... */ | |
| printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n", | |
| drive->name, __func__, ireason); | |
| } | |
| if (dev_is_idecd(drive) && ata_pc_request(rq)) | |
| rq->rq_flags |= RQF_FAILED; | |
| return 1; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_check_ireason); | |
| /* | |
| * This is the usual interrupt handler which will be called during a packet | |
| * command. We will transfer some of the data (as requested by the drive) | |
| * and will re-point interrupt handler to us. | |
| */ | |
| static ide_startstop_t ide_pc_intr(ide_drive_t *drive) | |
| { | |
| struct ide_atapi_pc *pc = drive->pc; | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct ide_cmd *cmd = &hwif->cmd; | |
| struct request *rq = hwif->rq; | |
| const struct ide_tp_ops *tp_ops = hwif->tp_ops; | |
| unsigned int timeout, done; | |
| u16 bcount; | |
| u8 stat, ireason, dsc = 0; | |
| u8 write = !!(pc->flags & PC_FLAG_WRITING); | |
| debug_log("Enter %s - interrupt handler\n", __func__); | |
| timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | |
| : WAIT_TAPE_CMD; | |
| /* Clear the interrupt */ | |
| stat = tp_ops->read_status(hwif); | |
| if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | |
| int rc; | |
| drive->waiting_for_dma = 0; | |
| rc = hwif->dma_ops->dma_end(drive); | |
| ide_dma_unmap_sg(drive, cmd); | |
| if (rc || (drive->media == ide_tape && (stat & ATA_ERR))) { | |
| if (drive->media == ide_floppy) | |
| printk(KERN_ERR PFX "%s: DMA %s error\n", | |
| drive->name, rq_data_dir(pc->rq) | |
| ? "write" : "read"); | |
| pc->flags |= PC_FLAG_DMA_ERROR; | |
| } else | |
| scsi_req(rq)->resid_len = 0; | |
| debug_log("%s: DMA finished\n", drive->name); | |
| } | |
| /* No more interrupts */ | |
| if ((stat & ATA_DRQ) == 0) { | |
| int uptodate; | |
| blk_status_t error; | |
| debug_log("Packet command completed, %d bytes transferred\n", | |
| blk_rq_bytes(rq)); | |
| pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | |
| local_irq_enable_in_hardirq(); | |
| if (drive->media == ide_tape && | |
| (stat & ATA_ERR) && scsi_req(rq)->cmd[0] == REQUEST_SENSE) | |
| stat &= ~ATA_ERR; | |
| if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) { | |
| /* Error detected */ | |
| debug_log("%s: I/O error\n", drive->name); | |
| if (drive->media != ide_tape) | |
| scsi_req(pc->rq)->result++; | |
| if (scsi_req(rq)->cmd[0] == REQUEST_SENSE) { | |
| printk(KERN_ERR PFX "%s: I/O error in request " | |
| "sense command\n", drive->name); | |
| return ide_do_reset(drive); | |
| } | |
| debug_log("[cmd %x]: check condition\n", scsi_req(rq)->cmd[0]); | |
| /* Retry operation */ | |
| ide_retry_pc(drive); | |
| /* queued, but not started */ | |
| return ide_stopped; | |
| } | |
| pc->error = 0; | |
| if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) | |
| dsc = 1; | |
| /* | |
| * ->pc_callback() might change rq->data_len for | |
| * residual count, cache total length. | |
| */ | |
| done = blk_rq_bytes(rq); | |
| /* Command finished - Call the callback function */ | |
| uptodate = drive->pc_callback(drive, dsc); | |
| if (uptodate == 0) | |
| drive->failed_pc = NULL; | |
| if (ata_misc_request(rq)) { | |
| scsi_req(rq)->result = 0; | |
| error = BLK_STS_OK; | |
| } else { | |
| if (blk_rq_is_passthrough(rq) && uptodate <= 0) { | |
| if (scsi_req(rq)->result == 0) | |
| scsi_req(rq)->result = -EIO; | |
| } | |
| error = uptodate ? BLK_STS_OK : BLK_STS_IOERR; | |
| } | |
| ide_complete_rq(drive, error, blk_rq_bytes(rq)); | |
| return ide_stopped; | |
| } | |
| if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { | |
| pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; | |
| printk(KERN_ERR PFX "%s: The device wants to issue more " | |
| "interrupts in DMA mode\n", drive->name); | |
| ide_dma_off(drive); | |
| return ide_do_reset(drive); | |
| } | |
| /* Get the number of bytes to transfer on this interrupt. */ | |
| ide_read_bcount_and_ireason(drive, &bcount, &ireason); | |
| if (ide_check_ireason(drive, rq, bcount, ireason, write)) | |
| return ide_do_reset(drive); | |
| done = min_t(unsigned int, bcount, cmd->nleft); | |
| ide_pio_bytes(drive, cmd, write, done); | |
| /* Update transferred byte count */ | |
| scsi_req(rq)->resid_len -= done; | |
| bcount -= done; | |
| if (bcount) | |
| ide_pad_transfer(drive, write, bcount); | |
| debug_log("[cmd %x] transferred %d bytes, padded %d bytes, resid: %u\n", | |
| scsi_req(rq)->cmd[0], done, bcount, scsi_req(rq)->resid_len); | |
| /* And set the interrupt handler again */ | |
| ide_set_handler(drive, ide_pc_intr, timeout); | |
| return ide_started; | |
| } | |
| static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf, | |
| u16 bcount, u8 dma) | |
| { | |
| cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO; | |
| cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM | | |
| IDE_VALID_FEATURE | valid_tf; | |
| cmd->tf.command = ATA_CMD_PACKET; | |
| cmd->tf.feature = dma; /* Use PIO/DMA */ | |
| cmd->tf.lbam = bcount & 0xff; | |
| cmd->tf.lbah = (bcount >> 8) & 0xff; | |
| } | |
| static u8 ide_read_ireason(ide_drive_t *drive) | |
| { | |
| struct ide_taskfile tf; | |
| drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT); | |
| return tf.nsect & 3; | |
| } | |
| static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) | |
| { | |
| int retries = 100; | |
| while (retries-- && ((ireason & ATAPI_COD) == 0 || | |
| (ireason & ATAPI_IO))) { | |
| printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing " | |
| "a packet command, retrying\n", drive->name); | |
| udelay(100); | |
| ireason = ide_read_ireason(drive); | |
| if (retries == 0) { | |
| printk(KERN_ERR PFX "%s: (IO,CoD != (0,1) while issuing" | |
| " a packet command, ignoring\n", | |
| drive->name); | |
| ireason |= ATAPI_COD; | |
| ireason &= ~ATAPI_IO; | |
| } | |
| } | |
| return ireason; | |
| } | |
| static int ide_delayed_transfer_pc(ide_drive_t *drive) | |
| { | |
| /* Send the actual packet */ | |
| drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12); | |
| /* Timeout for the packet command */ | |
| return WAIT_FLOPPY_CMD; | |
| } | |
| static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) | |
| { | |
| struct ide_atapi_pc *uninitialized_var(pc); | |
| ide_hwif_t *hwif = drive->hwif; | |
| struct request *rq = hwif->rq; | |
| ide_expiry_t *expiry; | |
| unsigned int timeout; | |
| int cmd_len; | |
| ide_startstop_t startstop; | |
| u8 ireason; | |
| if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { | |
| printk(KERN_ERR PFX "%s: Strange, packet command initiated yet " | |
| "DRQ isn't asserted\n", drive->name); | |
| return startstop; | |
| } | |
| if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { | |
| if (drive->dma) | |
| drive->waiting_for_dma = 1; | |
| } | |
| if (dev_is_idecd(drive)) { | |
| /* ATAPI commands get padded out to 12 bytes minimum */ | |
| cmd_len = COMMAND_SIZE(scsi_req(rq)->cmd[0]); | |
| if (cmd_len < ATAPI_MIN_CDB_BYTES) | |
| cmd_len = ATAPI_MIN_CDB_BYTES; | |
| timeout = rq->timeout; | |
| expiry = ide_cd_expiry; | |
| } else { | |
| pc = drive->pc; | |
| cmd_len = ATAPI_MIN_CDB_BYTES; | |
| /* | |
| * If necessary schedule the packet transfer to occur 'timeout' | |
| * milliseconds later in ide_delayed_transfer_pc() after the | |
| * device says it's ready for a packet. | |
| */ | |
| if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { | |
| timeout = drive->pc_delay; | |
| expiry = &ide_delayed_transfer_pc; | |
| } else { | |
| timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | |
| : WAIT_TAPE_CMD; | |
| expiry = NULL; | |
| } | |
| ireason = ide_read_ireason(drive); | |
| if (drive->media == ide_tape) | |
| ireason = ide_wait_ireason(drive, ireason); | |
| if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { | |
| printk(KERN_ERR PFX "%s: (IO,CoD) != (0,1) while " | |
| "issuing a packet command\n", drive->name); | |
| return ide_do_reset(drive); | |
| } | |
| } | |
| hwif->expiry = expiry; | |
| /* Set the interrupt routine */ | |
| ide_set_handler(drive, | |
| (dev_is_idecd(drive) ? drive->irq_handler | |
| : ide_pc_intr), | |
| timeout); | |
| /* Send the actual packet */ | |
| if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) | |
| hwif->tp_ops->output_data(drive, NULL, scsi_req(rq)->cmd, cmd_len); | |
| /* Begin DMA, if necessary */ | |
| if (dev_is_idecd(drive)) { | |
| if (drive->dma) | |
| hwif->dma_ops->dma_start(drive); | |
| } else { | |
| if (pc->flags & PC_FLAG_DMA_OK) { | |
| pc->flags |= PC_FLAG_DMA_IN_PROGRESS; | |
| hwif->dma_ops->dma_start(drive); | |
| } | |
| } | |
| return ide_started; | |
| } | |
| ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_cmd *cmd) | |
| { | |
| struct ide_atapi_pc *pc; | |
| ide_hwif_t *hwif = drive->hwif; | |
| ide_expiry_t *expiry = NULL; | |
| struct request *rq = hwif->rq; | |
| unsigned int timeout, bytes; | |
| u16 bcount; | |
| u8 valid_tf; | |
| u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT); | |
| if (dev_is_idecd(drive)) { | |
| valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL; | |
| bcount = ide_cd_get_xferlen(rq); | |
| expiry = ide_cd_expiry; | |
| timeout = ATAPI_WAIT_PC; | |
| if (drive->dma) | |
| drive->dma = !ide_dma_prepare(drive, cmd); | |
| } else { | |
| pc = drive->pc; | |
| valid_tf = IDE_VALID_DEVICE; | |
| bytes = blk_rq_bytes(rq); | |
| bcount = ((drive->media == ide_tape) ? bytes | |
| : min_t(unsigned int, | |
| bytes, 63 * 1024)); | |
| /* We haven't transferred any data yet */ | |
| scsi_req(rq)->resid_len = bcount; | |
| if (pc->flags & PC_FLAG_DMA_ERROR) { | |
| pc->flags &= ~PC_FLAG_DMA_ERROR; | |
| ide_dma_off(drive); | |
| } | |
| if (pc->flags & PC_FLAG_DMA_OK) | |
| drive->dma = !ide_dma_prepare(drive, cmd); | |
| if (!drive->dma) | |
| pc->flags &= ~PC_FLAG_DMA_OK; | |
| timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD | |
| : WAIT_TAPE_CMD; | |
| } | |
| ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma); | |
| (void)do_rw_taskfile(drive, cmd); | |
| if (drq_int) { | |
| if (drive->dma) | |
| drive->waiting_for_dma = 0; | |
| hwif->expiry = expiry; | |
| } | |
| ide_execute_command(drive, cmd, ide_transfer_pc, timeout); | |
| return drq_int ? ide_started : ide_transfer_pc(drive); | |
| } | |
| EXPORT_SYMBOL_GPL(ide_issue_pc); |