| /* | |
| * Copyright (C) 2012-2016 Mentor Graphics Inc. | |
| * | |
| * Queued image conversion support, with tiling and rotation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * for more details. | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <linux/dma-mapping.h> | |
| #include <video/imx-ipu-image-convert.h> | |
| #include "ipu-prv.h" | |
| /* | |
| * The IC Resizer has a restriction that the output frame from the | |
| * resizer must be 1024 or less in both width (pixels) and height | |
| * (lines). | |
| * | |
| * The image converter attempts to split up a conversion when | |
| * the desired output (converted) frame resolution exceeds the | |
| * IC resizer limit of 1024 in either dimension. | |
| * | |
| * If either dimension of the output frame exceeds the limit, the | |
| * dimension is split into 1, 2, or 4 equal stripes, for a maximum | |
| * of 4*4 or 16 tiles. A conversion is then carried out for each | |
| * tile (but taking care to pass the full frame stride length to | |
| * the DMA channel's parameter memory!). IDMA double-buffering is used | |
| * to convert each tile back-to-back when possible (see note below | |
| * when double_buffering boolean is set). | |
| * | |
| * Note that the input frame must be split up into the same number | |
| * of tiles as the output frame. | |
| * | |
| * FIXME: at this point there is no attempt to deal with visible seams | |
| * at the tile boundaries when upscaling. The seams are caused by a reset | |
| * of the bilinear upscale interpolation when starting a new tile. The | |
| * seams are barely visible for small upscale factors, but become | |
| * increasingly visible as the upscale factor gets larger, since more | |
| * interpolated pixels get thrown out at the tile boundaries. A possilble | |
| * fix might be to overlap tiles of different sizes, but this must be done | |
| * while also maintaining the IDMAC dma buffer address alignment and 8x8 IRT | |
| * alignment restrictions of each tile. | |
| */ | |
| #define MAX_STRIPES_W 4 | |
| #define MAX_STRIPES_H 4 | |
| #define MAX_TILES (MAX_STRIPES_W * MAX_STRIPES_H) | |
| #define MIN_W 16 | |
| #define MIN_H 8 | |
| #define MAX_W 4096 | |
| #define MAX_H 4096 | |
| enum ipu_image_convert_type { | |
| IMAGE_CONVERT_IN = 0, | |
| IMAGE_CONVERT_OUT, | |
| }; | |
| struct ipu_image_convert_dma_buf { | |
| void *virt; | |
| dma_addr_t phys; | |
| unsigned long len; | |
| }; | |
| struct ipu_image_convert_dma_chan { | |
| int in; | |
| int out; | |
| int rot_in; | |
| int rot_out; | |
| int vdi_in_p; | |
| int vdi_in; | |
| int vdi_in_n; | |
| }; | |
| /* dimensions of one tile */ | |
| struct ipu_image_tile { | |
| u32 width; | |
| u32 height; | |
| /* size and strides are in bytes */ | |
| u32 size; | |
| u32 stride; | |
| u32 rot_stride; | |
| /* start Y or packed offset of this tile */ | |
| u32 offset; | |
| /* offset from start to tile in U plane, for planar formats */ | |
| u32 u_off; | |
| /* offset from start to tile in V plane, for planar formats */ | |
| u32 v_off; | |
| }; | |
| struct ipu_image_convert_image { | |
| struct ipu_image base; | |
| enum ipu_image_convert_type type; | |
| const struct ipu_image_pixfmt *fmt; | |
| unsigned int stride; | |
| /* # of rows (horizontal stripes) if dest height is > 1024 */ | |
| unsigned int num_rows; | |
| /* # of columns (vertical stripes) if dest width is > 1024 */ | |
| unsigned int num_cols; | |
| struct ipu_image_tile tile[MAX_TILES]; | |
| }; | |
| struct ipu_image_pixfmt { | |
| u32 fourcc; /* V4L2 fourcc */ | |
| int bpp; /* total bpp */ | |
| int uv_width_dec; /* decimation in width for U/V planes */ | |
| int uv_height_dec; /* decimation in height for U/V planes */ | |
| bool planar; /* planar format */ | |
| bool uv_swapped; /* U and V planes are swapped */ | |
| bool uv_packed; /* partial planar (U and V in same plane) */ | |
| }; | |
| struct ipu_image_convert_ctx; | |
| struct ipu_image_convert_chan; | |
| struct ipu_image_convert_priv; | |
| struct ipu_image_convert_ctx { | |
| struct ipu_image_convert_chan *chan; | |
| ipu_image_convert_cb_t complete; | |
| void *complete_context; | |
| /* Source/destination image data and rotation mode */ | |
| struct ipu_image_convert_image in; | |
| struct ipu_image_convert_image out; | |
| enum ipu_rotate_mode rot_mode; | |
| /* intermediate buffer for rotation */ | |
| struct ipu_image_convert_dma_buf rot_intermediate[2]; | |
| /* current buffer number for double buffering */ | |
| int cur_buf_num; | |
| bool aborting; | |
| struct completion aborted; | |
| /* can we use double-buffering for this conversion operation? */ | |
| bool double_buffering; | |
| /* num_rows * num_cols */ | |
| unsigned int num_tiles; | |
| /* next tile to process */ | |
| unsigned int next_tile; | |
| /* where to place converted tile in dest image */ | |
| unsigned int out_tile_map[MAX_TILES]; | |
| struct list_head list; | |
| }; | |
| struct ipu_image_convert_chan { | |
| struct ipu_image_convert_priv *priv; | |
| enum ipu_ic_task ic_task; | |
| const struct ipu_image_convert_dma_chan *dma_ch; | |
| struct ipu_ic *ic; | |
| struct ipuv3_channel *in_chan; | |
| struct ipuv3_channel *out_chan; | |
| struct ipuv3_channel *rotation_in_chan; | |
| struct ipuv3_channel *rotation_out_chan; | |
| /* the IPU end-of-frame irqs */ | |
| int out_eof_irq; | |
| int rot_out_eof_irq; | |
| spinlock_t irqlock; | |
| /* list of convert contexts */ | |
| struct list_head ctx_list; | |
| /* queue of conversion runs */ | |
| struct list_head pending_q; | |
| /* queue of completed runs */ | |
| struct list_head done_q; | |
| /* the current conversion run */ | |
| struct ipu_image_convert_run *current_run; | |
| }; | |
| struct ipu_image_convert_priv { | |
| struct ipu_image_convert_chan chan[IC_NUM_TASKS]; | |
| struct ipu_soc *ipu; | |
| }; | |
| static const struct ipu_image_convert_dma_chan | |
| image_convert_dma_chan[IC_NUM_TASKS] = { | |
| [IC_TASK_VIEWFINDER] = { | |
| .in = IPUV3_CHANNEL_MEM_IC_PRP_VF, | |
| .out = IPUV3_CHANNEL_IC_PRP_VF_MEM, | |
| .rot_in = IPUV3_CHANNEL_MEM_ROT_VF, | |
| .rot_out = IPUV3_CHANNEL_ROT_VF_MEM, | |
| .vdi_in_p = IPUV3_CHANNEL_MEM_VDI_PREV, | |
| .vdi_in = IPUV3_CHANNEL_MEM_VDI_CUR, | |
| .vdi_in_n = IPUV3_CHANNEL_MEM_VDI_NEXT, | |
| }, | |
| [IC_TASK_POST_PROCESSOR] = { | |
| .in = IPUV3_CHANNEL_MEM_IC_PP, | |
| .out = IPUV3_CHANNEL_IC_PP_MEM, | |
| .rot_in = IPUV3_CHANNEL_MEM_ROT_PP, | |
| .rot_out = IPUV3_CHANNEL_ROT_PP_MEM, | |
| }, | |
| }; | |
| static const struct ipu_image_pixfmt image_convert_formats[] = { | |
| { | |
| .fourcc = V4L2_PIX_FMT_RGB565, | |
| .bpp = 16, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_RGB24, | |
| .bpp = 24, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_BGR24, | |
| .bpp = 24, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_RGB32, | |
| .bpp = 32, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_BGR32, | |
| .bpp = 32, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_YUYV, | |
| .bpp = 16, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 1, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_UYVY, | |
| .bpp = 16, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 1, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_YUV420, | |
| .bpp = 12, | |
| .planar = true, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 2, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_YVU420, | |
| .bpp = 12, | |
| .planar = true, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 2, | |
| .uv_swapped = true, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_NV12, | |
| .bpp = 12, | |
| .planar = true, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 2, | |
| .uv_packed = true, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_YUV422P, | |
| .bpp = 16, | |
| .planar = true, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 1, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_NV16, | |
| .bpp = 16, | |
| .planar = true, | |
| .uv_width_dec = 2, | |
| .uv_height_dec = 1, | |
| .uv_packed = true, | |
| }, | |
| }; | |
| static const struct ipu_image_pixfmt *get_format(u32 fourcc) | |
| { | |
| const struct ipu_image_pixfmt *ret = NULL; | |
| unsigned int i; | |
| for (i = 0; i < ARRAY_SIZE(image_convert_formats); i++) { | |
| if (image_convert_formats[i].fourcc == fourcc) { | |
| ret = &image_convert_formats[i]; | |
| break; | |
| } | |
| } | |
| return ret; | |
| } | |
| static void dump_format(struct ipu_image_convert_ctx *ctx, | |
| struct ipu_image_convert_image *ic_image) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| dev_dbg(priv->ipu->dev, | |
| "task %u: ctx %p: %s format: %dx%d (%dx%d tiles of size %dx%d), %c%c%c%c\n", | |
| chan->ic_task, ctx, | |
| ic_image->type == IMAGE_CONVERT_OUT ? "Output" : "Input", | |
| ic_image->base.pix.width, ic_image->base.pix.height, | |
| ic_image->num_cols, ic_image->num_rows, | |
| ic_image->tile[0].width, ic_image->tile[0].height, | |
| ic_image->fmt->fourcc & 0xff, | |
| (ic_image->fmt->fourcc >> 8) & 0xff, | |
| (ic_image->fmt->fourcc >> 16) & 0xff, | |
| (ic_image->fmt->fourcc >> 24) & 0xff); | |
| } | |
| int ipu_image_convert_enum_format(int index, u32 *fourcc) | |
| { | |
| const struct ipu_image_pixfmt *fmt; | |
| if (index >= (int)ARRAY_SIZE(image_convert_formats)) | |
| return -EINVAL; | |
| /* Format found */ | |
| fmt = &image_convert_formats[index]; | |
| *fourcc = fmt->fourcc; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_enum_format); | |
| static void free_dma_buf(struct ipu_image_convert_priv *priv, | |
| struct ipu_image_convert_dma_buf *buf) | |
| { | |
| if (buf->virt) | |
| dma_free_coherent(priv->ipu->dev, | |
| buf->len, buf->virt, buf->phys); | |
| buf->virt = NULL; | |
| buf->phys = 0; | |
| } | |
| static int alloc_dma_buf(struct ipu_image_convert_priv *priv, | |
| struct ipu_image_convert_dma_buf *buf, | |
| int size) | |
| { | |
| buf->len = PAGE_ALIGN(size); | |
| buf->virt = dma_alloc_coherent(priv->ipu->dev, buf->len, &buf->phys, | |
| GFP_DMA | GFP_KERNEL); | |
| if (!buf->virt) { | |
| dev_err(priv->ipu->dev, "failed to alloc dma buffer\n"); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| static inline int num_stripes(int dim) | |
| { | |
| if (dim <= 1024) | |
| return 1; | |
| else if (dim <= 2048) | |
| return 2; | |
| else | |
| return 4; | |
| } | |
| static void calc_tile_dimensions(struct ipu_image_convert_ctx *ctx, | |
| struct ipu_image_convert_image *image) | |
| { | |
| int i; | |
| for (i = 0; i < ctx->num_tiles; i++) { | |
| struct ipu_image_tile *tile = &image->tile[i]; | |
| tile->height = image->base.pix.height / image->num_rows; | |
| tile->width = image->base.pix.width / image->num_cols; | |
| tile->size = ((tile->height * image->fmt->bpp) >> 3) * | |
| tile->width; | |
| if (image->fmt->planar) { | |
| tile->stride = tile->width; | |
| tile->rot_stride = tile->height; | |
| } else { | |
| tile->stride = | |
| (image->fmt->bpp * tile->width) >> 3; | |
| tile->rot_stride = | |
| (image->fmt->bpp * tile->height) >> 3; | |
| } | |
| } | |
| } | |
| /* | |
| * Use the rotation transformation to find the tile coordinates | |
| * (row, col) of a tile in the destination frame that corresponds | |
| * to the given tile coordinates of a source frame. The destination | |
| * coordinate is then converted to a tile index. | |
| */ | |
| static int transform_tile_index(struct ipu_image_convert_ctx *ctx, | |
| int src_row, int src_col) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_image *s_image = &ctx->in; | |
| struct ipu_image_convert_image *d_image = &ctx->out; | |
| int dst_row, dst_col; | |
| /* with no rotation it's a 1:1 mapping */ | |
| if (ctx->rot_mode == IPU_ROTATE_NONE) | |
| return src_row * s_image->num_cols + src_col; | |
| /* | |
| * before doing the transform, first we have to translate | |
| * source row,col for an origin in the center of s_image | |
| */ | |
| src_row = src_row * 2 - (s_image->num_rows - 1); | |
| src_col = src_col * 2 - (s_image->num_cols - 1); | |
| /* do the rotation transform */ | |
| if (ctx->rot_mode & IPU_ROT_BIT_90) { | |
| dst_col = -src_row; | |
| dst_row = src_col; | |
| } else { | |
| dst_col = src_col; | |
| dst_row = src_row; | |
| } | |
| /* apply flip */ | |
| if (ctx->rot_mode & IPU_ROT_BIT_HFLIP) | |
| dst_col = -dst_col; | |
| if (ctx->rot_mode & IPU_ROT_BIT_VFLIP) | |
| dst_row = -dst_row; | |
| dev_dbg(priv->ipu->dev, "task %u: ctx %p: [%d,%d] --> [%d,%d]\n", | |
| chan->ic_task, ctx, src_col, src_row, dst_col, dst_row); | |
| /* | |
| * finally translate dest row,col using an origin in upper | |
| * left of d_image | |
| */ | |
| dst_row += d_image->num_rows - 1; | |
| dst_col += d_image->num_cols - 1; | |
| dst_row /= 2; | |
| dst_col /= 2; | |
| return dst_row * d_image->num_cols + dst_col; | |
| } | |
| /* | |
| * Fill the out_tile_map[] with transformed destination tile indeces. | |
| */ | |
| static void calc_out_tile_map(struct ipu_image_convert_ctx *ctx) | |
| { | |
| struct ipu_image_convert_image *s_image = &ctx->in; | |
| unsigned int row, col, tile = 0; | |
| for (row = 0; row < s_image->num_rows; row++) { | |
| for (col = 0; col < s_image->num_cols; col++) { | |
| ctx->out_tile_map[tile] = | |
| transform_tile_index(ctx, row, col); | |
| tile++; | |
| } | |
| } | |
| } | |
| static void calc_tile_offsets_planar(struct ipu_image_convert_ctx *ctx, | |
| struct ipu_image_convert_image *image) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| const struct ipu_image_pixfmt *fmt = image->fmt; | |
| unsigned int row, col, tile = 0; | |
| u32 H, w, h, y_stride, uv_stride; | |
| u32 uv_row_off, uv_col_off, uv_off, u_off, v_off, tmp; | |
| u32 y_row_off, y_col_off, y_off; | |
| u32 y_size, uv_size; | |
| /* setup some convenience vars */ | |
| H = image->base.pix.height; | |
| y_stride = image->stride; | |
| uv_stride = y_stride / fmt->uv_width_dec; | |
| if (fmt->uv_packed) | |
| uv_stride *= 2; | |
| y_size = H * y_stride; | |
| uv_size = y_size / (fmt->uv_width_dec * fmt->uv_height_dec); | |
| for (row = 0; row < image->num_rows; row++) { | |
| w = image->tile[tile].width; | |
| h = image->tile[tile].height; | |
| y_row_off = row * h * y_stride; | |
| uv_row_off = (row * h * uv_stride) / fmt->uv_height_dec; | |
| for (col = 0; col < image->num_cols; col++) { | |
| y_col_off = col * w; | |
| uv_col_off = y_col_off / fmt->uv_width_dec; | |
| if (fmt->uv_packed) | |
| uv_col_off *= 2; | |
| y_off = y_row_off + y_col_off; | |
| uv_off = uv_row_off + uv_col_off; | |
| u_off = y_size - y_off + uv_off; | |
| v_off = (fmt->uv_packed) ? 0 : u_off + uv_size; | |
| if (fmt->uv_swapped) { | |
| tmp = u_off; | |
| u_off = v_off; | |
| v_off = tmp; | |
| } | |
| image->tile[tile].offset = y_off; | |
| image->tile[tile].u_off = u_off; | |
| image->tile[tile++].v_off = v_off; | |
| dev_dbg(priv->ipu->dev, | |
| "task %u: ctx %p: %s@[%d,%d]: y_off %08x, u_off %08x, v_off %08x\n", | |
| chan->ic_task, ctx, | |
| image->type == IMAGE_CONVERT_IN ? | |
| "Input" : "Output", row, col, | |
| y_off, u_off, v_off); | |
| } | |
| } | |
| } | |
| static void calc_tile_offsets_packed(struct ipu_image_convert_ctx *ctx, | |
| struct ipu_image_convert_image *image) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| const struct ipu_image_pixfmt *fmt = image->fmt; | |
| unsigned int row, col, tile = 0; | |
| u32 w, h, bpp, stride; | |
| u32 row_off, col_off; | |
| /* setup some convenience vars */ | |
| stride = image->stride; | |
| bpp = fmt->bpp; | |
| for (row = 0; row < image->num_rows; row++) { | |
| w = image->tile[tile].width; | |
| h = image->tile[tile].height; | |
| row_off = row * h * stride; | |
| for (col = 0; col < image->num_cols; col++) { | |
| col_off = (col * w * bpp) >> 3; | |
| image->tile[tile].offset = row_off + col_off; | |
| image->tile[tile].u_off = 0; | |
| image->tile[tile++].v_off = 0; | |
| dev_dbg(priv->ipu->dev, | |
| "task %u: ctx %p: %s@[%d,%d]: phys %08x\n", | |
| chan->ic_task, ctx, | |
| image->type == IMAGE_CONVERT_IN ? | |
| "Input" : "Output", row, col, | |
| row_off + col_off); | |
| } | |
| } | |
| } | |
| static void calc_tile_offsets(struct ipu_image_convert_ctx *ctx, | |
| struct ipu_image_convert_image *image) | |
| { | |
| if (image->fmt->planar) | |
| calc_tile_offsets_planar(ctx, image); | |
| else | |
| calc_tile_offsets_packed(ctx, image); | |
| } | |
| /* | |
| * return the number of runs in given queue (pending_q or done_q) | |
| * for this context. hold irqlock when calling. | |
| */ | |
| static int get_run_count(struct ipu_image_convert_ctx *ctx, | |
| struct list_head *q) | |
| { | |
| struct ipu_image_convert_run *run; | |
| int count = 0; | |
| lockdep_assert_held(&ctx->chan->irqlock); | |
| list_for_each_entry(run, q, list) { | |
| if (run->ctx == ctx) | |
| count++; | |
| } | |
| return count; | |
| } | |
| static void convert_stop(struct ipu_image_convert_run *run) | |
| { | |
| struct ipu_image_convert_ctx *ctx = run->ctx; | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| dev_dbg(priv->ipu->dev, "%s: task %u: stopping ctx %p run %p\n", | |
| __func__, chan->ic_task, ctx, run); | |
| /* disable IC tasks and the channels */ | |
| ipu_ic_task_disable(chan->ic); | |
| ipu_idmac_disable_channel(chan->in_chan); | |
| ipu_idmac_disable_channel(chan->out_chan); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| ipu_idmac_disable_channel(chan->rotation_in_chan); | |
| ipu_idmac_disable_channel(chan->rotation_out_chan); | |
| ipu_idmac_unlink(chan->out_chan, chan->rotation_in_chan); | |
| } | |
| ipu_ic_disable(chan->ic); | |
| } | |
| static void init_idmac_channel(struct ipu_image_convert_ctx *ctx, | |
| struct ipuv3_channel *channel, | |
| struct ipu_image_convert_image *image, | |
| enum ipu_rotate_mode rot_mode, | |
| bool rot_swap_width_height) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| unsigned int burst_size; | |
| u32 width, height, stride; | |
| dma_addr_t addr0, addr1 = 0; | |
| struct ipu_image tile_image; | |
| unsigned int tile_idx[2]; | |
| if (image->type == IMAGE_CONVERT_OUT) { | |
| tile_idx[0] = ctx->out_tile_map[0]; | |
| tile_idx[1] = ctx->out_tile_map[1]; | |
| } else { | |
| tile_idx[0] = 0; | |
| tile_idx[1] = 1; | |
| } | |
| if (rot_swap_width_height) { | |
| width = image->tile[0].height; | |
| height = image->tile[0].width; | |
| stride = image->tile[0].rot_stride; | |
| addr0 = ctx->rot_intermediate[0].phys; | |
| if (ctx->double_buffering) | |
| addr1 = ctx->rot_intermediate[1].phys; | |
| } else { | |
| width = image->tile[0].width; | |
| height = image->tile[0].height; | |
| stride = image->stride; | |
| addr0 = image->base.phys0 + | |
| image->tile[tile_idx[0]].offset; | |
| if (ctx->double_buffering) | |
| addr1 = image->base.phys0 + | |
| image->tile[tile_idx[1]].offset; | |
| } | |
| ipu_cpmem_zero(channel); | |
| memset(&tile_image, 0, sizeof(tile_image)); | |
| tile_image.pix.width = tile_image.rect.width = width; | |
| tile_image.pix.height = tile_image.rect.height = height; | |
| tile_image.pix.bytesperline = stride; | |
| tile_image.pix.pixelformat = image->fmt->fourcc; | |
| tile_image.phys0 = addr0; | |
| tile_image.phys1 = addr1; | |
| ipu_cpmem_set_image(channel, &tile_image); | |
| if (image->fmt->planar && !rot_swap_width_height) | |
| ipu_cpmem_set_uv_offset(channel, | |
| image->tile[tile_idx[0]].u_off, | |
| image->tile[tile_idx[0]].v_off); | |
| if (rot_mode) | |
| ipu_cpmem_set_rotation(channel, rot_mode); | |
| if (channel == chan->rotation_in_chan || | |
| channel == chan->rotation_out_chan) { | |
| burst_size = 8; | |
| ipu_cpmem_set_block_mode(channel); | |
| } else | |
| burst_size = (width % 16) ? 8 : 16; | |
| ipu_cpmem_set_burstsize(channel, burst_size); | |
| ipu_ic_task_idma_init(chan->ic, channel, width, height, | |
| burst_size, rot_mode); | |
| /* | |
| * Setting a non-zero AXI ID collides with the PRG AXI snooping, so | |
| * only do this when there is no PRG present. | |
| */ | |
| if (!channel->ipu->prg_priv) | |
| ipu_cpmem_set_axi_id(channel, 1); | |
| ipu_idmac_set_double_buffer(channel, ctx->double_buffering); | |
| } | |
| static int convert_start(struct ipu_image_convert_run *run) | |
| { | |
| struct ipu_image_convert_ctx *ctx = run->ctx; | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_image *s_image = &ctx->in; | |
| struct ipu_image_convert_image *d_image = &ctx->out; | |
| enum ipu_color_space src_cs, dest_cs; | |
| unsigned int dest_width, dest_height; | |
| int ret; | |
| dev_dbg(priv->ipu->dev, "%s: task %u: starting ctx %p run %p\n", | |
| __func__, chan->ic_task, ctx, run); | |
| src_cs = ipu_pixelformat_to_colorspace(s_image->fmt->fourcc); | |
| dest_cs = ipu_pixelformat_to_colorspace(d_image->fmt->fourcc); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| /* swap width/height for resizer */ | |
| dest_width = d_image->tile[0].height; | |
| dest_height = d_image->tile[0].width; | |
| } else { | |
| dest_width = d_image->tile[0].width; | |
| dest_height = d_image->tile[0].height; | |
| } | |
| /* setup the IC resizer and CSC */ | |
| ret = ipu_ic_task_init(chan->ic, | |
| s_image->tile[0].width, | |
| s_image->tile[0].height, | |
| dest_width, | |
| dest_height, | |
| src_cs, dest_cs); | |
| if (ret) { | |
| dev_err(priv->ipu->dev, "ipu_ic_task_init failed, %d\n", ret); | |
| return ret; | |
| } | |
| /* init the source MEM-->IC PP IDMAC channel */ | |
| init_idmac_channel(ctx, chan->in_chan, s_image, | |
| IPU_ROTATE_NONE, false); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| /* init the IC PP-->MEM IDMAC channel */ | |
| init_idmac_channel(ctx, chan->out_chan, d_image, | |
| IPU_ROTATE_NONE, true); | |
| /* init the MEM-->IC PP ROT IDMAC channel */ | |
| init_idmac_channel(ctx, chan->rotation_in_chan, d_image, | |
| ctx->rot_mode, true); | |
| /* init the destination IC PP ROT-->MEM IDMAC channel */ | |
| init_idmac_channel(ctx, chan->rotation_out_chan, d_image, | |
| IPU_ROTATE_NONE, false); | |
| /* now link IC PP-->MEM to MEM-->IC PP ROT */ | |
| ipu_idmac_link(chan->out_chan, chan->rotation_in_chan); | |
| } else { | |
| /* init the destination IC PP-->MEM IDMAC channel */ | |
| init_idmac_channel(ctx, chan->out_chan, d_image, | |
| ctx->rot_mode, false); | |
| } | |
| /* enable the IC */ | |
| ipu_ic_enable(chan->ic); | |
| /* set buffers ready */ | |
| ipu_idmac_select_buffer(chan->in_chan, 0); | |
| ipu_idmac_select_buffer(chan->out_chan, 0); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) | |
| ipu_idmac_select_buffer(chan->rotation_out_chan, 0); | |
| if (ctx->double_buffering) { | |
| ipu_idmac_select_buffer(chan->in_chan, 1); | |
| ipu_idmac_select_buffer(chan->out_chan, 1); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) | |
| ipu_idmac_select_buffer(chan->rotation_out_chan, 1); | |
| } | |
| /* enable the channels! */ | |
| ipu_idmac_enable_channel(chan->in_chan); | |
| ipu_idmac_enable_channel(chan->out_chan); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| ipu_idmac_enable_channel(chan->rotation_in_chan); | |
| ipu_idmac_enable_channel(chan->rotation_out_chan); | |
| } | |
| ipu_ic_task_enable(chan->ic); | |
| ipu_cpmem_dump(chan->in_chan); | |
| ipu_cpmem_dump(chan->out_chan); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| ipu_cpmem_dump(chan->rotation_in_chan); | |
| ipu_cpmem_dump(chan->rotation_out_chan); | |
| } | |
| ipu_dump(priv->ipu); | |
| return 0; | |
| } | |
| /* hold irqlock when calling */ | |
| static int do_run(struct ipu_image_convert_run *run) | |
| { | |
| struct ipu_image_convert_ctx *ctx = run->ctx; | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| lockdep_assert_held(&chan->irqlock); | |
| ctx->in.base.phys0 = run->in_phys; | |
| ctx->out.base.phys0 = run->out_phys; | |
| ctx->cur_buf_num = 0; | |
| ctx->next_tile = 1; | |
| /* remove run from pending_q and set as current */ | |
| list_del(&run->list); | |
| chan->current_run = run; | |
| return convert_start(run); | |
| } | |
| /* hold irqlock when calling */ | |
| static void run_next(struct ipu_image_convert_chan *chan) | |
| { | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_run *run, *tmp; | |
| int ret; | |
| lockdep_assert_held(&chan->irqlock); | |
| list_for_each_entry_safe(run, tmp, &chan->pending_q, list) { | |
| /* skip contexts that are aborting */ | |
| if (run->ctx->aborting) { | |
| dev_dbg(priv->ipu->dev, | |
| "%s: task %u: skipping aborting ctx %p run %p\n", | |
| __func__, chan->ic_task, run->ctx, run); | |
| continue; | |
| } | |
| ret = do_run(run); | |
| if (!ret) | |
| break; | |
| /* | |
| * something went wrong with start, add the run | |
| * to done q and continue to the next run in the | |
| * pending q. | |
| */ | |
| run->status = ret; | |
| list_add_tail(&run->list, &chan->done_q); | |
| chan->current_run = NULL; | |
| } | |
| } | |
| static void empty_done_q(struct ipu_image_convert_chan *chan) | |
| { | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_run *run; | |
| unsigned long flags; | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| while (!list_empty(&chan->done_q)) { | |
| run = list_entry(chan->done_q.next, | |
| struct ipu_image_convert_run, | |
| list); | |
| list_del(&run->list); | |
| dev_dbg(priv->ipu->dev, | |
| "%s: task %u: completing ctx %p run %p with %d\n", | |
| __func__, chan->ic_task, run->ctx, run, run->status); | |
| /* call the completion callback and free the run */ | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| run->ctx->complete(run, run->ctx->complete_context); | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| } | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| } | |
| /* | |
| * the bottom half thread clears out the done_q, calling the | |
| * completion handler for each. | |
| */ | |
| static irqreturn_t do_bh(int irq, void *dev_id) | |
| { | |
| struct ipu_image_convert_chan *chan = dev_id; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_ctx *ctx; | |
| unsigned long flags; | |
| dev_dbg(priv->ipu->dev, "%s: task %u: enter\n", __func__, | |
| chan->ic_task); | |
| empty_done_q(chan); | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| /* | |
| * the done_q is cleared out, signal any contexts | |
| * that are aborting that abort can complete. | |
| */ | |
| list_for_each_entry(ctx, &chan->ctx_list, list) { | |
| if (ctx->aborting) { | |
| dev_dbg(priv->ipu->dev, | |
| "%s: task %u: signaling abort for ctx %p\n", | |
| __func__, chan->ic_task, ctx); | |
| complete(&ctx->aborted); | |
| } | |
| } | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| dev_dbg(priv->ipu->dev, "%s: task %u: exit\n", __func__, | |
| chan->ic_task); | |
| return IRQ_HANDLED; | |
| } | |
| /* hold irqlock when calling */ | |
| static irqreturn_t do_irq(struct ipu_image_convert_run *run) | |
| { | |
| struct ipu_image_convert_ctx *ctx = run->ctx; | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_tile *src_tile, *dst_tile; | |
| struct ipu_image_convert_image *s_image = &ctx->in; | |
| struct ipu_image_convert_image *d_image = &ctx->out; | |
| struct ipuv3_channel *outch; | |
| unsigned int dst_idx; | |
| lockdep_assert_held(&chan->irqlock); | |
| outch = ipu_rot_mode_is_irt(ctx->rot_mode) ? | |
| chan->rotation_out_chan : chan->out_chan; | |
| /* | |
| * It is difficult to stop the channel DMA before the channels | |
| * enter the paused state. Without double-buffering the channels | |
| * are always in a paused state when the EOF irq occurs, so it | |
| * is safe to stop the channels now. For double-buffering we | |
| * just ignore the abort until the operation completes, when it | |
| * is safe to shut down. | |
| */ | |
| if (ctx->aborting && !ctx->double_buffering) { | |
| convert_stop(run); | |
| run->status = -EIO; | |
| goto done; | |
| } | |
| if (ctx->next_tile == ctx->num_tiles) { | |
| /* | |
| * the conversion is complete | |
| */ | |
| convert_stop(run); | |
| run->status = 0; | |
| goto done; | |
| } | |
| /* | |
| * not done, place the next tile buffers. | |
| */ | |
| if (!ctx->double_buffering) { | |
| src_tile = &s_image->tile[ctx->next_tile]; | |
| dst_idx = ctx->out_tile_map[ctx->next_tile]; | |
| dst_tile = &d_image->tile[dst_idx]; | |
| ipu_cpmem_set_buffer(chan->in_chan, 0, | |
| s_image->base.phys0 + src_tile->offset); | |
| ipu_cpmem_set_buffer(outch, 0, | |
| d_image->base.phys0 + dst_tile->offset); | |
| if (s_image->fmt->planar) | |
| ipu_cpmem_set_uv_offset(chan->in_chan, | |
| src_tile->u_off, | |
| src_tile->v_off); | |
| if (d_image->fmt->planar) | |
| ipu_cpmem_set_uv_offset(outch, | |
| dst_tile->u_off, | |
| dst_tile->v_off); | |
| ipu_idmac_select_buffer(chan->in_chan, 0); | |
| ipu_idmac_select_buffer(outch, 0); | |
| } else if (ctx->next_tile < ctx->num_tiles - 1) { | |
| src_tile = &s_image->tile[ctx->next_tile + 1]; | |
| dst_idx = ctx->out_tile_map[ctx->next_tile + 1]; | |
| dst_tile = &d_image->tile[dst_idx]; | |
| ipu_cpmem_set_buffer(chan->in_chan, ctx->cur_buf_num, | |
| s_image->base.phys0 + src_tile->offset); | |
| ipu_cpmem_set_buffer(outch, ctx->cur_buf_num, | |
| d_image->base.phys0 + dst_tile->offset); | |
| ipu_idmac_select_buffer(chan->in_chan, ctx->cur_buf_num); | |
| ipu_idmac_select_buffer(outch, ctx->cur_buf_num); | |
| ctx->cur_buf_num ^= 1; | |
| } | |
| ctx->next_tile++; | |
| return IRQ_HANDLED; | |
| done: | |
| list_add_tail(&run->list, &chan->done_q); | |
| chan->current_run = NULL; | |
| run_next(chan); | |
| return IRQ_WAKE_THREAD; | |
| } | |
| static irqreturn_t norotate_irq(int irq, void *data) | |
| { | |
| struct ipu_image_convert_chan *chan = data; | |
| struct ipu_image_convert_ctx *ctx; | |
| struct ipu_image_convert_run *run; | |
| unsigned long flags; | |
| irqreturn_t ret; | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| /* get current run and its context */ | |
| run = chan->current_run; | |
| if (!run) { | |
| ret = IRQ_NONE; | |
| goto out; | |
| } | |
| ctx = run->ctx; | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| /* this is a rotation operation, just ignore */ | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| ret = do_irq(run); | |
| out: | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| return ret; | |
| } | |
| static irqreturn_t rotate_irq(int irq, void *data) | |
| { | |
| struct ipu_image_convert_chan *chan = data; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_ctx *ctx; | |
| struct ipu_image_convert_run *run; | |
| unsigned long flags; | |
| irqreturn_t ret; | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| /* get current run and its context */ | |
| run = chan->current_run; | |
| if (!run) { | |
| ret = IRQ_NONE; | |
| goto out; | |
| } | |
| ctx = run->ctx; | |
| if (!ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| /* this was NOT a rotation operation, shouldn't happen */ | |
| dev_err(priv->ipu->dev, "Unexpected rotation interrupt\n"); | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| ret = do_irq(run); | |
| out: | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| return ret; | |
| } | |
| /* | |
| * try to force the completion of runs for this ctx. Called when | |
| * abort wait times out in ipu_image_convert_abort(). | |
| */ | |
| static void force_abort(struct ipu_image_convert_ctx *ctx) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_run *run; | |
| unsigned long flags; | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| run = chan->current_run; | |
| if (run && run->ctx == ctx) { | |
| convert_stop(run); | |
| run->status = -EIO; | |
| list_add_tail(&run->list, &chan->done_q); | |
| chan->current_run = NULL; | |
| run_next(chan); | |
| } | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| empty_done_q(chan); | |
| } | |
| static void release_ipu_resources(struct ipu_image_convert_chan *chan) | |
| { | |
| if (chan->out_eof_irq >= 0) | |
| free_irq(chan->out_eof_irq, chan); | |
| if (chan->rot_out_eof_irq >= 0) | |
| free_irq(chan->rot_out_eof_irq, chan); | |
| if (!IS_ERR_OR_NULL(chan->in_chan)) | |
| ipu_idmac_put(chan->in_chan); | |
| if (!IS_ERR_OR_NULL(chan->out_chan)) | |
| ipu_idmac_put(chan->out_chan); | |
| if (!IS_ERR_OR_NULL(chan->rotation_in_chan)) | |
| ipu_idmac_put(chan->rotation_in_chan); | |
| if (!IS_ERR_OR_NULL(chan->rotation_out_chan)) | |
| ipu_idmac_put(chan->rotation_out_chan); | |
| if (!IS_ERR_OR_NULL(chan->ic)) | |
| ipu_ic_put(chan->ic); | |
| chan->in_chan = chan->out_chan = chan->rotation_in_chan = | |
| chan->rotation_out_chan = NULL; | |
| chan->out_eof_irq = chan->rot_out_eof_irq = -1; | |
| } | |
| static int get_ipu_resources(struct ipu_image_convert_chan *chan) | |
| { | |
| const struct ipu_image_convert_dma_chan *dma = chan->dma_ch; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| int ret; | |
| /* get IC */ | |
| chan->ic = ipu_ic_get(priv->ipu, chan->ic_task); | |
| if (IS_ERR(chan->ic)) { | |
| dev_err(priv->ipu->dev, "could not acquire IC\n"); | |
| ret = PTR_ERR(chan->ic); | |
| goto err; | |
| } | |
| /* get IDMAC channels */ | |
| chan->in_chan = ipu_idmac_get(priv->ipu, dma->in); | |
| chan->out_chan = ipu_idmac_get(priv->ipu, dma->out); | |
| if (IS_ERR(chan->in_chan) || IS_ERR(chan->out_chan)) { | |
| dev_err(priv->ipu->dev, "could not acquire idmac channels\n"); | |
| ret = -EBUSY; | |
| goto err; | |
| } | |
| chan->rotation_in_chan = ipu_idmac_get(priv->ipu, dma->rot_in); | |
| chan->rotation_out_chan = ipu_idmac_get(priv->ipu, dma->rot_out); | |
| if (IS_ERR(chan->rotation_in_chan) || IS_ERR(chan->rotation_out_chan)) { | |
| dev_err(priv->ipu->dev, | |
| "could not acquire idmac rotation channels\n"); | |
| ret = -EBUSY; | |
| goto err; | |
| } | |
| /* acquire the EOF interrupts */ | |
| chan->out_eof_irq = ipu_idmac_channel_irq(priv->ipu, | |
| chan->out_chan, | |
| IPU_IRQ_EOF); | |
| ret = request_threaded_irq(chan->out_eof_irq, norotate_irq, do_bh, | |
| 0, "ipu-ic", chan); | |
| if (ret < 0) { | |
| dev_err(priv->ipu->dev, "could not acquire irq %d\n", | |
| chan->out_eof_irq); | |
| chan->out_eof_irq = -1; | |
| goto err; | |
| } | |
| chan->rot_out_eof_irq = ipu_idmac_channel_irq(priv->ipu, | |
| chan->rotation_out_chan, | |
| IPU_IRQ_EOF); | |
| ret = request_threaded_irq(chan->rot_out_eof_irq, rotate_irq, do_bh, | |
| 0, "ipu-ic", chan); | |
| if (ret < 0) { | |
| dev_err(priv->ipu->dev, "could not acquire irq %d\n", | |
| chan->rot_out_eof_irq); | |
| chan->rot_out_eof_irq = -1; | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| release_ipu_resources(chan); | |
| return ret; | |
| } | |
| static int fill_image(struct ipu_image_convert_ctx *ctx, | |
| struct ipu_image_convert_image *ic_image, | |
| struct ipu_image *image, | |
| enum ipu_image_convert_type type) | |
| { | |
| struct ipu_image_convert_priv *priv = ctx->chan->priv; | |
| ic_image->base = *image; | |
| ic_image->type = type; | |
| ic_image->fmt = get_format(image->pix.pixelformat); | |
| if (!ic_image->fmt) { | |
| dev_err(priv->ipu->dev, "pixelformat not supported for %s\n", | |
| type == IMAGE_CONVERT_OUT ? "Output" : "Input"); | |
| return -EINVAL; | |
| } | |
| if (ic_image->fmt->planar) | |
| ic_image->stride = ic_image->base.pix.width; | |
| else | |
| ic_image->stride = ic_image->base.pix.bytesperline; | |
| calc_tile_dimensions(ctx, ic_image); | |
| calc_tile_offsets(ctx, ic_image); | |
| return 0; | |
| } | |
| /* borrowed from drivers/media/v4l2-core/v4l2-common.c */ | |
| static unsigned int clamp_align(unsigned int x, unsigned int min, | |
| unsigned int max, unsigned int align) | |
| { | |
| /* Bits that must be zero to be aligned */ | |
| unsigned int mask = ~((1 << align) - 1); | |
| /* Clamp to aligned min and max */ | |
| x = clamp(x, (min + ~mask) & mask, max & mask); | |
| /* Round to nearest aligned value */ | |
| if (align) | |
| x = (x + (1 << (align - 1))) & mask; | |
| return x; | |
| } | |
| /* | |
| * We have to adjust the tile width such that the tile physaddrs and | |
| * U and V plane offsets are multiples of 8 bytes as required by | |
| * the IPU DMA Controller. For the planar formats, this corresponds | |
| * to a pixel alignment of 16 (but use a more formal equation since | |
| * the variables are available). For all the packed formats, 8 is | |
| * good enough. | |
| */ | |
| static inline u32 tile_width_align(const struct ipu_image_pixfmt *fmt) | |
| { | |
| return fmt->planar ? 8 * fmt->uv_width_dec : 8; | |
| } | |
| /* | |
| * For tile height alignment, we have to ensure that the output tile | |
| * heights are multiples of 8 lines if the IRT is required by the | |
| * given rotation mode (the IRT performs rotations on 8x8 blocks | |
| * at a time). If the IRT is not used, or for input image tiles, | |
| * 2 lines are good enough. | |
| */ | |
| static inline u32 tile_height_align(enum ipu_image_convert_type type, | |
| enum ipu_rotate_mode rot_mode) | |
| { | |
| return (type == IMAGE_CONVERT_OUT && | |
| ipu_rot_mode_is_irt(rot_mode)) ? 8 : 2; | |
| } | |
| /* Adjusts input/output images to IPU restrictions */ | |
| void ipu_image_convert_adjust(struct ipu_image *in, struct ipu_image *out, | |
| enum ipu_rotate_mode rot_mode) | |
| { | |
| const struct ipu_image_pixfmt *infmt, *outfmt; | |
| unsigned int num_in_rows, num_in_cols; | |
| unsigned int num_out_rows, num_out_cols; | |
| u32 w_align, h_align; | |
| infmt = get_format(in->pix.pixelformat); | |
| outfmt = get_format(out->pix.pixelformat); | |
| /* set some default pixel formats if needed */ | |
| if (!infmt) { | |
| in->pix.pixelformat = V4L2_PIX_FMT_RGB24; | |
| infmt = get_format(V4L2_PIX_FMT_RGB24); | |
| } | |
| if (!outfmt) { | |
| out->pix.pixelformat = V4L2_PIX_FMT_RGB24; | |
| outfmt = get_format(V4L2_PIX_FMT_RGB24); | |
| } | |
| /* image converter does not handle fields */ | |
| in->pix.field = out->pix.field = V4L2_FIELD_NONE; | |
| /* resizer cannot downsize more than 4:1 */ | |
| if (ipu_rot_mode_is_irt(rot_mode)) { | |
| out->pix.height = max_t(__u32, out->pix.height, | |
| in->pix.width / 4); | |
| out->pix.width = max_t(__u32, out->pix.width, | |
| in->pix.height / 4); | |
| } else { | |
| out->pix.width = max_t(__u32, out->pix.width, | |
| in->pix.width / 4); | |
| out->pix.height = max_t(__u32, out->pix.height, | |
| in->pix.height / 4); | |
| } | |
| /* get tiling rows/cols from output format */ | |
| num_out_rows = num_stripes(out->pix.height); | |
| num_out_cols = num_stripes(out->pix.width); | |
| if (ipu_rot_mode_is_irt(rot_mode)) { | |
| num_in_rows = num_out_cols; | |
| num_in_cols = num_out_rows; | |
| } else { | |
| num_in_rows = num_out_rows; | |
| num_in_cols = num_out_cols; | |
| } | |
| /* align input width/height */ | |
| w_align = ilog2(tile_width_align(infmt) * num_in_cols); | |
| h_align = ilog2(tile_height_align(IMAGE_CONVERT_IN, rot_mode) * | |
| num_in_rows); | |
| in->pix.width = clamp_align(in->pix.width, MIN_W, MAX_W, w_align); | |
| in->pix.height = clamp_align(in->pix.height, MIN_H, MAX_H, h_align); | |
| /* align output width/height */ | |
| w_align = ilog2(tile_width_align(outfmt) * num_out_cols); | |
| h_align = ilog2(tile_height_align(IMAGE_CONVERT_OUT, rot_mode) * | |
| num_out_rows); | |
| out->pix.width = clamp_align(out->pix.width, MIN_W, MAX_W, w_align); | |
| out->pix.height = clamp_align(out->pix.height, MIN_H, MAX_H, h_align); | |
| /* set input/output strides and image sizes */ | |
| in->pix.bytesperline = (in->pix.width * infmt->bpp) >> 3; | |
| in->pix.sizeimage = in->pix.height * in->pix.bytesperline; | |
| out->pix.bytesperline = (out->pix.width * outfmt->bpp) >> 3; | |
| out->pix.sizeimage = out->pix.height * out->pix.bytesperline; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_adjust); | |
| /* | |
| * this is used by ipu_image_convert_prepare() to verify set input and | |
| * output images are valid before starting the conversion. Clients can | |
| * also call it before calling ipu_image_convert_prepare(). | |
| */ | |
| int ipu_image_convert_verify(struct ipu_image *in, struct ipu_image *out, | |
| enum ipu_rotate_mode rot_mode) | |
| { | |
| struct ipu_image testin, testout; | |
| testin = *in; | |
| testout = *out; | |
| ipu_image_convert_adjust(&testin, &testout, rot_mode); | |
| if (testin.pix.width != in->pix.width || | |
| testin.pix.height != in->pix.height || | |
| testout.pix.width != out->pix.width || | |
| testout.pix.height != out->pix.height) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_verify); | |
| /* | |
| * Call ipu_image_convert_prepare() to prepare for the conversion of | |
| * given images and rotation mode. Returns a new conversion context. | |
| */ | |
| struct ipu_image_convert_ctx * | |
| ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task, | |
| struct ipu_image *in, struct ipu_image *out, | |
| enum ipu_rotate_mode rot_mode, | |
| ipu_image_convert_cb_t complete, | |
| void *complete_context) | |
| { | |
| struct ipu_image_convert_priv *priv = ipu->image_convert_priv; | |
| struct ipu_image_convert_image *s_image, *d_image; | |
| struct ipu_image_convert_chan *chan; | |
| struct ipu_image_convert_ctx *ctx; | |
| unsigned long flags; | |
| bool get_res; | |
| int ret; | |
| if (!in || !out || !complete || | |
| (ic_task != IC_TASK_VIEWFINDER && | |
| ic_task != IC_TASK_POST_PROCESSOR)) | |
| return ERR_PTR(-EINVAL); | |
| /* verify the in/out images before continuing */ | |
| ret = ipu_image_convert_verify(in, out, rot_mode); | |
| if (ret) { | |
| dev_err(priv->ipu->dev, "%s: in/out formats invalid\n", | |
| __func__); | |
| return ERR_PTR(ret); | |
| } | |
| chan = &priv->chan[ic_task]; | |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); | |
| if (!ctx) | |
| return ERR_PTR(-ENOMEM); | |
| dev_dbg(priv->ipu->dev, "%s: task %u: ctx %p\n", __func__, | |
| chan->ic_task, ctx); | |
| ctx->chan = chan; | |
| init_completion(&ctx->aborted); | |
| s_image = &ctx->in; | |
| d_image = &ctx->out; | |
| /* set tiling and rotation */ | |
| d_image->num_rows = num_stripes(out->pix.height); | |
| d_image->num_cols = num_stripes(out->pix.width); | |
| if (ipu_rot_mode_is_irt(rot_mode)) { | |
| s_image->num_rows = d_image->num_cols; | |
| s_image->num_cols = d_image->num_rows; | |
| } else { | |
| s_image->num_rows = d_image->num_rows; | |
| s_image->num_cols = d_image->num_cols; | |
| } | |
| ctx->num_tiles = d_image->num_cols * d_image->num_rows; | |
| ctx->rot_mode = rot_mode; | |
| ret = fill_image(ctx, s_image, in, IMAGE_CONVERT_IN); | |
| if (ret) | |
| goto out_free; | |
| ret = fill_image(ctx, d_image, out, IMAGE_CONVERT_OUT); | |
| if (ret) | |
| goto out_free; | |
| calc_out_tile_map(ctx); | |
| dump_format(ctx, s_image); | |
| dump_format(ctx, d_image); | |
| ctx->complete = complete; | |
| ctx->complete_context = complete_context; | |
| /* | |
| * Can we use double-buffering for this operation? If there is | |
| * only one tile (the whole image can be converted in a single | |
| * operation) there's no point in using double-buffering. Also, | |
| * the IPU's IDMAC channels allow only a single U and V plane | |
| * offset shared between both buffers, but these offsets change | |
| * for every tile, and therefore would have to be updated for | |
| * each buffer which is not possible. So double-buffering is | |
| * impossible when either the source or destination images are | |
| * a planar format (YUV420, YUV422P, etc.). | |
| */ | |
| ctx->double_buffering = (ctx->num_tiles > 1 && | |
| !s_image->fmt->planar && | |
| !d_image->fmt->planar); | |
| if (ipu_rot_mode_is_irt(ctx->rot_mode)) { | |
| ret = alloc_dma_buf(priv, &ctx->rot_intermediate[0], | |
| d_image->tile[0].size); | |
| if (ret) | |
| goto out_free; | |
| if (ctx->double_buffering) { | |
| ret = alloc_dma_buf(priv, | |
| &ctx->rot_intermediate[1], | |
| d_image->tile[0].size); | |
| if (ret) | |
| goto out_free_dmabuf0; | |
| } | |
| } | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| get_res = list_empty(&chan->ctx_list); | |
| list_add_tail(&ctx->list, &chan->ctx_list); | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| if (get_res) { | |
| ret = get_ipu_resources(chan); | |
| if (ret) | |
| goto out_free_dmabuf1; | |
| } | |
| return ctx; | |
| out_free_dmabuf1: | |
| free_dma_buf(priv, &ctx->rot_intermediate[1]); | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| list_del(&ctx->list); | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| out_free_dmabuf0: | |
| free_dma_buf(priv, &ctx->rot_intermediate[0]); | |
| out_free: | |
| kfree(ctx); | |
| return ERR_PTR(ret); | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_prepare); | |
| /* | |
| * Carry out a single image conversion run. Only the physaddr's of the input | |
| * and output image buffers are needed. The conversion context must have | |
| * been created previously with ipu_image_convert_prepare(). | |
| */ | |
| int ipu_image_convert_queue(struct ipu_image_convert_run *run) | |
| { | |
| struct ipu_image_convert_chan *chan; | |
| struct ipu_image_convert_priv *priv; | |
| struct ipu_image_convert_ctx *ctx; | |
| unsigned long flags; | |
| int ret = 0; | |
| if (!run || !run->ctx || !run->in_phys || !run->out_phys) | |
| return -EINVAL; | |
| ctx = run->ctx; | |
| chan = ctx->chan; | |
| priv = chan->priv; | |
| dev_dbg(priv->ipu->dev, "%s: task %u: ctx %p run %p\n", __func__, | |
| chan->ic_task, ctx, run); | |
| INIT_LIST_HEAD(&run->list); | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| if (ctx->aborting) { | |
| ret = -EIO; | |
| goto unlock; | |
| } | |
| list_add_tail(&run->list, &chan->pending_q); | |
| if (!chan->current_run) { | |
| ret = do_run(run); | |
| if (ret) | |
| chan->current_run = NULL; | |
| } | |
| unlock: | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_queue); | |
| /* Abort any active or pending conversions for this context */ | |
| void ipu_image_convert_abort(struct ipu_image_convert_ctx *ctx) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| struct ipu_image_convert_run *run, *active_run, *tmp; | |
| unsigned long flags; | |
| int run_count, ret; | |
| bool need_abort; | |
| reinit_completion(&ctx->aborted); | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| /* move all remaining pending runs in this context to done_q */ | |
| list_for_each_entry_safe(run, tmp, &chan->pending_q, list) { | |
| if (run->ctx != ctx) | |
| continue; | |
| run->status = -EIO; | |
| list_move_tail(&run->list, &chan->done_q); | |
| } | |
| run_count = get_run_count(ctx, &chan->done_q); | |
| active_run = (chan->current_run && chan->current_run->ctx == ctx) ? | |
| chan->current_run : NULL; | |
| need_abort = (run_count || active_run); | |
| ctx->aborting = need_abort; | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| if (!need_abort) { | |
| dev_dbg(priv->ipu->dev, | |
| "%s: task %u: no abort needed for ctx %p\n", | |
| __func__, chan->ic_task, ctx); | |
| return; | |
| } | |
| dev_dbg(priv->ipu->dev, | |
| "%s: task %u: wait for completion: %d runs, active run %p\n", | |
| __func__, chan->ic_task, run_count, active_run); | |
| ret = wait_for_completion_timeout(&ctx->aborted, | |
| msecs_to_jiffies(10000)); | |
| if (ret == 0) { | |
| dev_warn(priv->ipu->dev, "%s: timeout\n", __func__); | |
| force_abort(ctx); | |
| } | |
| ctx->aborting = false; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_abort); | |
| /* Unprepare image conversion context */ | |
| void ipu_image_convert_unprepare(struct ipu_image_convert_ctx *ctx) | |
| { | |
| struct ipu_image_convert_chan *chan = ctx->chan; | |
| struct ipu_image_convert_priv *priv = chan->priv; | |
| unsigned long flags; | |
| bool put_res; | |
| /* make sure no runs are hanging around */ | |
| ipu_image_convert_abort(ctx); | |
| dev_dbg(priv->ipu->dev, "%s: task %u: removing ctx %p\n", __func__, | |
| chan->ic_task, ctx); | |
| spin_lock_irqsave(&chan->irqlock, flags); | |
| list_del(&ctx->list); | |
| put_res = list_empty(&chan->ctx_list); | |
| spin_unlock_irqrestore(&chan->irqlock, flags); | |
| if (put_res) | |
| release_ipu_resources(chan); | |
| free_dma_buf(priv, &ctx->rot_intermediate[1]); | |
| free_dma_buf(priv, &ctx->rot_intermediate[0]); | |
| kfree(ctx); | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_unprepare); | |
| /* | |
| * "Canned" asynchronous single image conversion. Allocates and returns | |
| * a new conversion run. On successful return the caller must free the | |
| * run and call ipu_image_convert_unprepare() after conversion completes. | |
| */ | |
| struct ipu_image_convert_run * | |
| ipu_image_convert(struct ipu_soc *ipu, enum ipu_ic_task ic_task, | |
| struct ipu_image *in, struct ipu_image *out, | |
| enum ipu_rotate_mode rot_mode, | |
| ipu_image_convert_cb_t complete, | |
| void *complete_context) | |
| { | |
| struct ipu_image_convert_ctx *ctx; | |
| struct ipu_image_convert_run *run; | |
| int ret; | |
| ctx = ipu_image_convert_prepare(ipu, ic_task, in, out, rot_mode, | |
| complete, complete_context); | |
| if (IS_ERR(ctx)) | |
| return ERR_CAST(ctx); | |
| run = kzalloc(sizeof(*run), GFP_KERNEL); | |
| if (!run) { | |
| ipu_image_convert_unprepare(ctx); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| run->ctx = ctx; | |
| run->in_phys = in->phys0; | |
| run->out_phys = out->phys0; | |
| ret = ipu_image_convert_queue(run); | |
| if (ret) { | |
| ipu_image_convert_unprepare(ctx); | |
| kfree(run); | |
| return ERR_PTR(ret); | |
| } | |
| return run; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert); | |
| /* "Canned" synchronous single image conversion */ | |
| static void image_convert_sync_complete(struct ipu_image_convert_run *run, | |
| void *data) | |
| { | |
| struct completion *comp = data; | |
| complete(comp); | |
| } | |
| int ipu_image_convert_sync(struct ipu_soc *ipu, enum ipu_ic_task ic_task, | |
| struct ipu_image *in, struct ipu_image *out, | |
| enum ipu_rotate_mode rot_mode) | |
| { | |
| struct ipu_image_convert_run *run; | |
| struct completion comp; | |
| int ret; | |
| init_completion(&comp); | |
| run = ipu_image_convert(ipu, ic_task, in, out, rot_mode, | |
| image_convert_sync_complete, &comp); | |
| if (IS_ERR(run)) | |
| return PTR_ERR(run); | |
| ret = wait_for_completion_timeout(&comp, msecs_to_jiffies(10000)); | |
| ret = (ret == 0) ? -ETIMEDOUT : 0; | |
| ipu_image_convert_unprepare(run->ctx); | |
| kfree(run); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ipu_image_convert_sync); | |
| int ipu_image_convert_init(struct ipu_soc *ipu, struct device *dev) | |
| { | |
| struct ipu_image_convert_priv *priv; | |
| int i; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| ipu->image_convert_priv = priv; | |
| priv->ipu = ipu; | |
| for (i = 0; i < IC_NUM_TASKS; i++) { | |
| struct ipu_image_convert_chan *chan = &priv->chan[i]; | |
| chan->ic_task = i; | |
| chan->priv = priv; | |
| chan->dma_ch = &image_convert_dma_chan[i]; | |
| chan->out_eof_irq = -1; | |
| chan->rot_out_eof_irq = -1; | |
| spin_lock_init(&chan->irqlock); | |
| INIT_LIST_HEAD(&chan->ctx_list); | |
| INIT_LIST_HEAD(&chan->pending_q); | |
| INIT_LIST_HEAD(&chan->done_q); | |
| } | |
| return 0; | |
| } | |
| void ipu_image_convert_exit(struct ipu_soc *ipu) | |
| { | |
| } |