| /* | |
| * Copyright (C) 2007-2013 Michal Simek <monstr@monstr.eu> | |
| * Copyright (C) 2012-2013 Xilinx, Inc. | |
| * Copyright (C) 2007-2009 PetaLogix | |
| * Copyright (C) 2006 Atmark Techno, Inc. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/clock.h> | |
| #include <linux/sched_clock.h> | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/timecounter.h> | |
| #include <asm/cpuinfo.h> | |
| static void __iomem *timer_baseaddr; | |
| static unsigned int freq_div_hz; | |
| static unsigned int timer_clock_freq; | |
| #define TCSR0 (0x00) | |
| #define TLR0 (0x04) | |
| #define TCR0 (0x08) | |
| #define TCSR1 (0x10) | |
| #define TLR1 (0x14) | |
| #define TCR1 (0x18) | |
| #define TCSR_MDT (1<<0) | |
| #define TCSR_UDT (1<<1) | |
| #define TCSR_GENT (1<<2) | |
| #define TCSR_CAPT (1<<3) | |
| #define TCSR_ARHT (1<<4) | |
| #define TCSR_LOAD (1<<5) | |
| #define TCSR_ENIT (1<<6) | |
| #define TCSR_ENT (1<<7) | |
| #define TCSR_TINT (1<<8) | |
| #define TCSR_PWMA (1<<9) | |
| #define TCSR_ENALL (1<<10) | |
| static unsigned int (*read_fn)(void __iomem *); | |
| static void (*write_fn)(u32, void __iomem *); | |
| static void timer_write32(u32 val, void __iomem *addr) | |
| { | |
| iowrite32(val, addr); | |
| } | |
| static unsigned int timer_read32(void __iomem *addr) | |
| { | |
| return ioread32(addr); | |
| } | |
| static void timer_write32_be(u32 val, void __iomem *addr) | |
| { | |
| iowrite32be(val, addr); | |
| } | |
| static unsigned int timer_read32_be(void __iomem *addr) | |
| { | |
| return ioread32be(addr); | |
| } | |
| static inline void xilinx_timer0_stop(void) | |
| { | |
| write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT, | |
| timer_baseaddr + TCSR0); | |
| } | |
| static inline void xilinx_timer0_start_periodic(unsigned long load_val) | |
| { | |
| if (!load_val) | |
| load_val = 1; | |
| /* loading value to timer reg */ | |
| write_fn(load_val, timer_baseaddr + TLR0); | |
| /* load the initial value */ | |
| write_fn(TCSR_LOAD, timer_baseaddr + TCSR0); | |
| /* see timer data sheet for detail | |
| * !ENALL - don't enable 'em all | |
| * !PWMA - disable pwm | |
| * TINT - clear interrupt status | |
| * ENT- enable timer itself | |
| * ENIT - enable interrupt | |
| * !LOAD - clear the bit to let go | |
| * ARHT - auto reload | |
| * !CAPT - no external trigger | |
| * !GENT - no external signal | |
| * UDT - set the timer as down counter | |
| * !MDT0 - generate mode | |
| */ | |
| write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT, | |
| timer_baseaddr + TCSR0); | |
| } | |
| static inline void xilinx_timer0_start_oneshot(unsigned long load_val) | |
| { | |
| if (!load_val) | |
| load_val = 1; | |
| /* loading value to timer reg */ | |
| write_fn(load_val, timer_baseaddr + TLR0); | |
| /* load the initial value */ | |
| write_fn(TCSR_LOAD, timer_baseaddr + TCSR0); | |
| write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT, | |
| timer_baseaddr + TCSR0); | |
| } | |
| static int xilinx_timer_set_next_event(unsigned long delta, | |
| struct clock_event_device *dev) | |
| { | |
| pr_debug("%s: next event, delta %x\n", __func__, (u32)delta); | |
| xilinx_timer0_start_oneshot(delta); | |
| return 0; | |
| } | |
| static int xilinx_timer_shutdown(struct clock_event_device *evt) | |
| { | |
| pr_info("%s\n", __func__); | |
| xilinx_timer0_stop(); | |
| return 0; | |
| } | |
| static int xilinx_timer_set_periodic(struct clock_event_device *evt) | |
| { | |
| pr_info("%s\n", __func__); | |
| xilinx_timer0_start_periodic(freq_div_hz); | |
| return 0; | |
| } | |
| static struct clock_event_device clockevent_xilinx_timer = { | |
| .name = "xilinx_clockevent", | |
| .features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_PERIODIC, | |
| .shift = 8, | |
| .rating = 300, | |
| .set_next_event = xilinx_timer_set_next_event, | |
| .set_state_shutdown = xilinx_timer_shutdown, | |
| .set_state_periodic = xilinx_timer_set_periodic, | |
| }; | |
| static inline void timer_ack(void) | |
| { | |
| write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0); | |
| } | |
| static irqreturn_t timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = &clockevent_xilinx_timer; | |
| timer_ack(); | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| static struct irqaction timer_irqaction = { | |
| .handler = timer_interrupt, | |
| .flags = IRQF_TIMER, | |
| .name = "timer", | |
| .dev_id = &clockevent_xilinx_timer, | |
| }; | |
| static __init int xilinx_clockevent_init(void) | |
| { | |
| clockevent_xilinx_timer.mult = | |
| div_sc(timer_clock_freq, NSEC_PER_SEC, | |
| clockevent_xilinx_timer.shift); | |
| clockevent_xilinx_timer.max_delta_ns = | |
| clockevent_delta2ns((u32)~0, &clockevent_xilinx_timer); | |
| clockevent_xilinx_timer.max_delta_ticks = (u32)~0; | |
| clockevent_xilinx_timer.min_delta_ns = | |
| clockevent_delta2ns(1, &clockevent_xilinx_timer); | |
| clockevent_xilinx_timer.min_delta_ticks = 1; | |
| clockevent_xilinx_timer.cpumask = cpumask_of(0); | |
| clockevents_register_device(&clockevent_xilinx_timer); | |
| return 0; | |
| } | |
| static u64 xilinx_clock_read(void) | |
| { | |
| return read_fn(timer_baseaddr + TCR1); | |
| } | |
| static u64 xilinx_read(struct clocksource *cs) | |
| { | |
| /* reading actual value of timer 1 */ | |
| return (u64)xilinx_clock_read(); | |
| } | |
| static struct timecounter xilinx_tc = { | |
| .cc = NULL, | |
| }; | |
| static u64 xilinx_cc_read(const struct cyclecounter *cc) | |
| { | |
| return xilinx_read(NULL); | |
| } | |
| static struct cyclecounter xilinx_cc = { | |
| .read = xilinx_cc_read, | |
| .mask = CLOCKSOURCE_MASK(32), | |
| .shift = 8, | |
| }; | |
| static int __init init_xilinx_timecounter(void) | |
| { | |
| xilinx_cc.mult = div_sc(timer_clock_freq, NSEC_PER_SEC, | |
| xilinx_cc.shift); | |
| timecounter_init(&xilinx_tc, &xilinx_cc, sched_clock()); | |
| return 0; | |
| } | |
| static struct clocksource clocksource_microblaze = { | |
| .name = "xilinx_clocksource", | |
| .rating = 300, | |
| .read = xilinx_read, | |
| .mask = CLOCKSOURCE_MASK(32), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| }; | |
| static int __init xilinx_clocksource_init(void) | |
| { | |
| int ret; | |
| ret = clocksource_register_hz(&clocksource_microblaze, | |
| timer_clock_freq); | |
| if (ret) { | |
| pr_err("failed to register clocksource"); | |
| return ret; | |
| } | |
| /* stop timer1 */ | |
| write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT, | |
| timer_baseaddr + TCSR1); | |
| /* start timer1 - up counting without interrupt */ | |
| write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1); | |
| /* register timecounter - for ftrace support */ | |
| return init_xilinx_timecounter(); | |
| } | |
| static int __init xilinx_timer_init(struct device_node *timer) | |
| { | |
| struct clk *clk; | |
| static int initialized; | |
| u32 irq; | |
| u32 timer_num = 1; | |
| int ret; | |
| if (initialized) | |
| return -EINVAL; | |
| initialized = 1; | |
| timer_baseaddr = of_iomap(timer, 0); | |
| if (!timer_baseaddr) { | |
| pr_err("ERROR: invalid timer base address\n"); | |
| return -ENXIO; | |
| } | |
| write_fn = timer_write32; | |
| read_fn = timer_read32; | |
| write_fn(TCSR_MDT, timer_baseaddr + TCSR0); | |
| if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) { | |
| write_fn = timer_write32_be; | |
| read_fn = timer_read32_be; | |
| } | |
| irq = irq_of_parse_and_map(timer, 0); | |
| if (irq <= 0) { | |
| pr_err("Failed to parse and map irq"); | |
| return -EINVAL; | |
| } | |
| of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num); | |
| if (timer_num) { | |
| pr_err("Please enable two timers in HW\n"); | |
| return -EINVAL; | |
| } | |
| pr_info("%pOF: irq=%d\n", timer, irq); | |
| clk = of_clk_get(timer, 0); | |
| if (IS_ERR(clk)) { | |
| pr_err("ERROR: timer CCF input clock not found\n"); | |
| /* If there is clock-frequency property than use it */ | |
| of_property_read_u32(timer, "clock-frequency", | |
| &timer_clock_freq); | |
| } else { | |
| timer_clock_freq = clk_get_rate(clk); | |
| } | |
| if (!timer_clock_freq) { | |
| pr_err("ERROR: Using CPU clock frequency\n"); | |
| timer_clock_freq = cpuinfo.cpu_clock_freq; | |
| } | |
| freq_div_hz = timer_clock_freq / HZ; | |
| ret = setup_irq(irq, &timer_irqaction); | |
| if (ret) { | |
| pr_err("Failed to setup IRQ"); | |
| return ret; | |
| } | |
| ret = xilinx_clocksource_init(); | |
| if (ret) | |
| return ret; | |
| ret = xilinx_clockevent_init(); | |
| if (ret) | |
| return ret; | |
| sched_clock_register(xilinx_clock_read, 32, timer_clock_freq); | |
| return 0; | |
| } | |
| TIMER_OF_DECLARE(xilinx_timer, "xlnx,xps-timer-1.00.a", | |
| xilinx_timer_init); |