| // SPDX-License-Identifier: GPL-2.0 | |
| /* ptrace.c */ | |
| /* By Ross Biro 1/23/92 */ | |
| /* edited by Linus Torvalds */ | |
| /* mangled further by Bob Manson (manson@santafe.edu) */ | |
| /* more mutilation by David Mosberger (davidm@azstarnet.com) */ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/errno.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/user.h> | |
| #include <linux/security.h> | |
| #include <linux/signal.h> | |
| #include <linux/tracehook.h> | |
| #include <linux/audit.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/fpu.h> | |
| #include "proto.h" | |
| #define DEBUG DBG_MEM | |
| #undef DEBUG | |
| #ifdef DEBUG | |
| enum { | |
| DBG_MEM = (1<<0), | |
| DBG_BPT = (1<<1), | |
| DBG_MEM_ALL = (1<<2) | |
| }; | |
| #define DBG(fac,args) {if ((fac) & DEBUG) printk args;} | |
| #else | |
| #define DBG(fac,args) | |
| #endif | |
| #define BREAKINST 0x00000080 /* call_pal bpt */ | |
| /* | |
| * does not yet catch signals sent when the child dies. | |
| * in exit.c or in signal.c. | |
| */ | |
| /* | |
| * Processes always block with the following stack-layout: | |
| * | |
| * +================================+ <---- task + 2*PAGE_SIZE | |
| * | PALcode saved frame (ps, pc, | ^ | |
| * | gp, a0, a1, a2) | | | |
| * +================================+ | struct pt_regs | |
| * | | | | |
| * | frame generated by SAVE_ALL | | | |
| * | | v | |
| * +================================+ | |
| * | | ^ | |
| * | frame saved by do_switch_stack | | struct switch_stack | |
| * | | v | |
| * +================================+ | |
| */ | |
| /* | |
| * The following table maps a register index into the stack offset at | |
| * which the register is saved. Register indices are 0-31 for integer | |
| * regs, 32-63 for fp regs, and 64 for the pc. Notice that sp and | |
| * zero have no stack-slot and need to be treated specially (see | |
| * get_reg/put_reg below). | |
| */ | |
| enum { | |
| REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64 | |
| }; | |
| #define PT_REG(reg) \ | |
| (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg)) | |
| #define SW_REG(reg) \ | |
| (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \ | |
| + offsetof(struct switch_stack, reg)) | |
| static int regoff[] = { | |
| PT_REG( r0), PT_REG( r1), PT_REG( r2), PT_REG( r3), | |
| PT_REG( r4), PT_REG( r5), PT_REG( r6), PT_REG( r7), | |
| PT_REG( r8), SW_REG( r9), SW_REG( r10), SW_REG( r11), | |
| SW_REG( r12), SW_REG( r13), SW_REG( r14), SW_REG( r15), | |
| PT_REG( r16), PT_REG( r17), PT_REG( r18), PT_REG( r19), | |
| PT_REG( r20), PT_REG( r21), PT_REG( r22), PT_REG( r23), | |
| PT_REG( r24), PT_REG( r25), PT_REG( r26), PT_REG( r27), | |
| PT_REG( r28), PT_REG( gp), -1, -1, | |
| SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]), | |
| SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]), | |
| SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]), | |
| SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]), | |
| SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]), | |
| SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]), | |
| SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]), | |
| SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]), | |
| PT_REG( pc) | |
| }; | |
| static unsigned long zero; | |
| /* | |
| * Get address of register REGNO in task TASK. | |
| */ | |
| static unsigned long * | |
| get_reg_addr(struct task_struct * task, unsigned long regno) | |
| { | |
| unsigned long *addr; | |
| if (regno == 30) { | |
| addr = &task_thread_info(task)->pcb.usp; | |
| } else if (regno == 65) { | |
| addr = &task_thread_info(task)->pcb.unique; | |
| } else if (regno == 31 || regno > 65) { | |
| zero = 0; | |
| addr = &zero; | |
| } else { | |
| addr = task_stack_page(task) + regoff[regno]; | |
| } | |
| return addr; | |
| } | |
| /* | |
| * Get contents of register REGNO in task TASK. | |
| */ | |
| static unsigned long | |
| get_reg(struct task_struct * task, unsigned long regno) | |
| { | |
| /* Special hack for fpcr -- combine hardware and software bits. */ | |
| if (regno == 63) { | |
| unsigned long fpcr = *get_reg_addr(task, regno); | |
| unsigned long swcr | |
| = task_thread_info(task)->ieee_state & IEEE_SW_MASK; | |
| swcr = swcr_update_status(swcr, fpcr); | |
| return fpcr | swcr; | |
| } | |
| return *get_reg_addr(task, regno); | |
| } | |
| /* | |
| * Write contents of register REGNO in task TASK. | |
| */ | |
| static int | |
| put_reg(struct task_struct *task, unsigned long regno, unsigned long data) | |
| { | |
| if (regno == 63) { | |
| task_thread_info(task)->ieee_state | |
| = ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK) | |
| | (data & IEEE_SW_MASK)); | |
| data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data); | |
| } | |
| *get_reg_addr(task, regno) = data; | |
| return 0; | |
| } | |
| static inline int | |
| read_int(struct task_struct *task, unsigned long addr, int * data) | |
| { | |
| int copied = access_process_vm(task, addr, data, sizeof(int), | |
| FOLL_FORCE); | |
| return (copied == sizeof(int)) ? 0 : -EIO; | |
| } | |
| static inline int | |
| write_int(struct task_struct *task, unsigned long addr, int data) | |
| { | |
| int copied = access_process_vm(task, addr, &data, sizeof(int), | |
| FOLL_FORCE | FOLL_WRITE); | |
| return (copied == sizeof(int)) ? 0 : -EIO; | |
| } | |
| /* | |
| * Set breakpoint. | |
| */ | |
| int | |
| ptrace_set_bpt(struct task_struct * child) | |
| { | |
| int displ, i, res, reg_b, nsaved = 0; | |
| unsigned int insn, op_code; | |
| unsigned long pc; | |
| pc = get_reg(child, REG_PC); | |
| res = read_int(child, pc, (int *) &insn); | |
| if (res < 0) | |
| return res; | |
| op_code = insn >> 26; | |
| if (op_code >= 0x30) { | |
| /* | |
| * It's a branch: instead of trying to figure out | |
| * whether the branch will be taken or not, we'll put | |
| * a breakpoint at either location. This is simpler, | |
| * more reliable, and probably not a whole lot slower | |
| * than the alternative approach of emulating the | |
| * branch (emulation can be tricky for fp branches). | |
| */ | |
| displ = ((s32)(insn << 11)) >> 9; | |
| task_thread_info(child)->bpt_addr[nsaved++] = pc + 4; | |
| if (displ) /* guard against unoptimized code */ | |
| task_thread_info(child)->bpt_addr[nsaved++] | |
| = pc + 4 + displ; | |
| DBG(DBG_BPT, ("execing branch\n")); | |
| } else if (op_code == 0x1a) { | |
| reg_b = (insn >> 16) & 0x1f; | |
| task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b); | |
| DBG(DBG_BPT, ("execing jump\n")); | |
| } else { | |
| task_thread_info(child)->bpt_addr[nsaved++] = pc + 4; | |
| DBG(DBG_BPT, ("execing normal insn\n")); | |
| } | |
| /* install breakpoints: */ | |
| for (i = 0; i < nsaved; ++i) { | |
| res = read_int(child, task_thread_info(child)->bpt_addr[i], | |
| (int *) &insn); | |
| if (res < 0) | |
| return res; | |
| task_thread_info(child)->bpt_insn[i] = insn; | |
| DBG(DBG_BPT, (" -> next_pc=%lx\n", | |
| task_thread_info(child)->bpt_addr[i])); | |
| res = write_int(child, task_thread_info(child)->bpt_addr[i], | |
| BREAKINST); | |
| if (res < 0) | |
| return res; | |
| } | |
| task_thread_info(child)->bpt_nsaved = nsaved; | |
| return 0; | |
| } | |
| /* | |
| * Ensure no single-step breakpoint is pending. Returns non-zero | |
| * value if child was being single-stepped. | |
| */ | |
| int | |
| ptrace_cancel_bpt(struct task_struct * child) | |
| { | |
| int i, nsaved = task_thread_info(child)->bpt_nsaved; | |
| task_thread_info(child)->bpt_nsaved = 0; | |
| if (nsaved > 2) { | |
| printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved); | |
| nsaved = 2; | |
| } | |
| for (i = 0; i < nsaved; ++i) { | |
| write_int(child, task_thread_info(child)->bpt_addr[i], | |
| task_thread_info(child)->bpt_insn[i]); | |
| } | |
| return (nsaved != 0); | |
| } | |
| void user_enable_single_step(struct task_struct *child) | |
| { | |
| /* Mark single stepping. */ | |
| task_thread_info(child)->bpt_nsaved = -1; | |
| } | |
| void user_disable_single_step(struct task_struct *child) | |
| { | |
| ptrace_cancel_bpt(child); | |
| } | |
| /* | |
| * Called by kernel/ptrace.c when detaching.. | |
| * | |
| * Make sure the single step bit is not set. | |
| */ | |
| void ptrace_disable(struct task_struct *child) | |
| { | |
| user_disable_single_step(child); | |
| } | |
| long arch_ptrace(struct task_struct *child, long request, | |
| unsigned long addr, unsigned long data) | |
| { | |
| unsigned long tmp; | |
| size_t copied; | |
| long ret; | |
| switch (request) { | |
| /* When I and D space are separate, these will need to be fixed. */ | |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ | |
| case PTRACE_PEEKDATA: | |
| copied = ptrace_access_vm(child, addr, &tmp, sizeof(tmp), | |
| FOLL_FORCE); | |
| ret = -EIO; | |
| if (copied != sizeof(tmp)) | |
| break; | |
| force_successful_syscall_return(); | |
| ret = tmp; | |
| break; | |
| /* Read register number ADDR. */ | |
| case PTRACE_PEEKUSR: | |
| force_successful_syscall_return(); | |
| ret = get_reg(child, addr); | |
| DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret)); | |
| break; | |
| /* When I and D space are separate, this will have to be fixed. */ | |
| case PTRACE_POKETEXT: /* write the word at location addr. */ | |
| case PTRACE_POKEDATA: | |
| ret = generic_ptrace_pokedata(child, addr, data); | |
| break; | |
| case PTRACE_POKEUSR: /* write the specified register */ | |
| DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data)); | |
| ret = put_reg(child, addr, data); | |
| break; | |
| default: | |
| ret = ptrace_request(child, request, addr, data); | |
| break; | |
| } | |
| return ret; | |
| } | |
| asmlinkage unsigned long syscall_trace_enter(void) | |
| { | |
| unsigned long ret = 0; | |
| struct pt_regs *regs = current_pt_regs(); | |
| if (test_thread_flag(TIF_SYSCALL_TRACE) && | |
| tracehook_report_syscall_entry(current_pt_regs())) | |
| ret = -1UL; | |
| audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19); | |
| return ret ?: current_pt_regs()->r0; | |
| } | |
| asmlinkage void | |
| syscall_trace_leave(void) | |
| { | |
| audit_syscall_exit(current_pt_regs()); | |
| if (test_thread_flag(TIF_SYSCALL_TRACE)) | |
| tracehook_report_syscall_exit(current_pt_regs(), 0); | |
| } |