| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| |
| #include "microAptiv.dtsi" |
| |
| / { |
| compatible = "digilent,nexys4ddr"; |
| |
| aliases { |
| serial0 = &axi_uart16550; |
| }; |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x08000000>; |
| }; |
| |
| cpuintc: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "mti,cpu-interrupt-controller"; |
| }; |
| |
| axi_intc: interrupt-controller@10200000 { |
| #interrupt-cells = <1>; |
| compatible = "xlnx,xps-intc-1.00.a"; |
| interrupt-controller; |
| reg = <0x10200000 0x10000>; |
| xlnx,kind-of-intr = <0x0>; |
| xlnx,num-intr-inputs = <0x6>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <6>; |
| }; |
| |
| axi_gpio: gpio@10600000 { |
| #gpio-cells = <1>; |
| compatible = "xlnx,xps-gpio-1.00.a"; |
| gpio-controller; |
| reg = <0x10600000 0x10000>; |
| xlnx,all-inputs = <0x0>; |
| xlnx,dout-default = <0x0>; |
| xlnx,gpio-width = <0x16>; |
| xlnx,interrupt-present = <0x0>; |
| xlnx,is-dual = <0x0>; |
| xlnx,tri-default = <0xffffffff>; |
| } ; |
| |
| axi_ethernetlite: ethernet@10e00000 { |
| compatible = "xlnx,xps-ethernetlite-3.00.a"; |
| device_type = "network"; |
| interrupt-parent = <&axi_intc>; |
| interrupts = <1>; |
| phy-handle = <&phy0>; |
| reg = <0x10e00000 0x10000>; |
| xlnx,duplex = <0x1>; |
| xlnx,include-global-buffers = <0x1>; |
| xlnx,include-internal-loopback = <0x0>; |
| xlnx,include-mdio = <0x1>; |
| xlnx,instance = "axi_ethernetlite_inst"; |
| xlnx,rx-ping-pong = <0x1>; |
| xlnx,s-axi-id-width = <0x1>; |
| xlnx,tx-ping-pong = <0x1>; |
| xlnx,use-internal = <0x0>; |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| phy0: phy@1 { |
| device_type = "ethernet-phy"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| axi_uart16550: serial@10400000 { |
| compatible = "ns16550a"; |
| reg = <0x10400000 0x10000>; |
| |
| reg-shift = <2>; |
| reg-offset = <0x1000>; |
| |
| clocks = <&ext>; |
| |
| interrupt-parent = <&axi_intc>; |
| interrupts = <0>; |
| }; |
| |
| axi_i2c: i2c@10A00000 { |
| compatible = "xlnx,xps-iic-2.00.a"; |
| interrupt-parent = <&axi_intc>; |
| interrupts = <4>; |
| reg = < 0x10A00000 0x10000 >; |
| clocks = <&ext>; |
| xlnx,clk-freq = <0x5f5e100>; |
| xlnx,family = "Artix7"; |
| xlnx,gpo-width = <0x1>; |
| xlnx,iic-freq = <0x186a0>; |
| xlnx,scl-inertial-delay = <0x0>; |
| xlnx,sda-inertial-delay = <0x0>; |
| xlnx,ten-bit-adr = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ad7420@4B { |
| compatible = "adi,adt7420"; |
| reg = <0x4B>; |
| }; |
| } ; |
| }; |
| |
| &ext { |
| clock-frequency = <50000000>; |
| }; |