| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* thread_info.h: low-level thread information | |
| * | |
| * Copyright (C) 2002 David Howells (dhowells@redhat.com) | |
| * - Incorporating suggestions made by Linus Torvalds and Dave Miller | |
| */ | |
| #ifndef _ASM_X86_THREAD_INFO_H | |
| #define _ASM_X86_THREAD_INFO_H | |
| #include <linux/compiler.h> | |
| #include <asm/page.h> | |
| #include <asm/percpu.h> | |
| #include <asm/types.h> | |
| /* | |
| * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we | |
| * reserve at the top of the kernel stack. We do it because of a nasty | |
| * 32-bit corner case. On x86_32, the hardware stack frame is | |
| * variable-length. Except for vm86 mode, struct pt_regs assumes a | |
| * maximum-length frame. If we enter from CPL 0, the top 8 bytes of | |
| * pt_regs don't actually exist. Ordinarily this doesn't matter, but it | |
| * does in at least one case: | |
| * | |
| * If we take an NMI early enough in SYSENTER, then we can end up with | |
| * pt_regs that extends above sp0. On the way out, in the espfix code, | |
| * we can read the saved SS value, but that value will be above sp0. | |
| * Without this offset, that can result in a page fault. (We are | |
| * careful that, in this case, the value we read doesn't matter.) | |
| * | |
| * In vm86 mode, the hardware frame is much longer still, so add 16 | |
| * bytes to make room for the real-mode segments. | |
| * | |
| * x86_64 has a fixed-length stack frame. | |
| */ | |
| #ifdef CONFIG_X86_32 | |
| # ifdef CONFIG_VM86 | |
| # define TOP_OF_KERNEL_STACK_PADDING 16 | |
| # else | |
| # define TOP_OF_KERNEL_STACK_PADDING 8 | |
| # endif | |
| #else | |
| # define TOP_OF_KERNEL_STACK_PADDING 0 | |
| #endif | |
| /* | |
| * low level task data that entry.S needs immediate access to | |
| * - this struct should fit entirely inside of one cache line | |
| * - this struct shares the supervisor stack pages | |
| */ | |
| #ifndef __ASSEMBLY__ | |
| struct task_struct; | |
| #include <asm/cpufeature.h> | |
| #include <linux/atomic.h> | |
| struct thread_info { | |
| unsigned long flags; /* low level flags */ | |
| u32 status; /* thread synchronous flags */ | |
| }; | |
| #define INIT_THREAD_INFO(tsk) \ | |
| { \ | |
| .flags = 0, \ | |
| } | |
| #else /* !__ASSEMBLY__ */ | |
| #include <asm/asm-offsets.h> | |
| #endif | |
| /* | |
| * thread information flags | |
| * - these are process state flags that various assembly files | |
| * may need to access | |
| */ | |
| #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ | |
| #define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ | |
| #define TIF_SIGPENDING 2 /* signal pending */ | |
| #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ | |
| #define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ | |
| #define TIF_SSBD 5 /* Reduced data speculation */ | |
| #define TIF_SYSCALL_EMU 6 /* syscall emulation active */ | |
| #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ | |
| #define TIF_SECCOMP 8 /* secure computing */ | |
| #define TIF_USER_RETURN_NOTIFY 11 /* notify kernel of userspace return */ | |
| #define TIF_UPROBE 12 /* breakpointed or singlestepping */ | |
| #define TIF_PATCH_PENDING 13 /* pending live patching update */ | |
| #define TIF_NOCPUID 15 /* CPUID is not accessible in userland */ | |
| #define TIF_NOTSC 16 /* TSC is not accessible in userland */ | |
| #define TIF_IA32 17 /* IA32 compatibility process */ | |
| #define TIF_NOHZ 19 /* in adaptive nohz mode */ | |
| #define TIF_MEMDIE 20 /* is terminating due to OOM killer */ | |
| #define TIF_POLLING_NRFLAG 21 /* idle is polling for TIF_NEED_RESCHED */ | |
| #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ | |
| #define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ | |
| #define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */ | |
| #define TIF_LAZY_MMU_UPDATES 27 /* task is updating the mmu lazily */ | |
| #define TIF_SYSCALL_TRACEPOINT 28 /* syscall tracepoint instrumentation */ | |
| #define TIF_ADDR32 29 /* 32-bit address space on 64 bits */ | |
| #define TIF_X32 30 /* 32-bit native x86-64 binary */ | |
| #define TIF_FSCHECK 31 /* Check FS is USER_DS on return */ | |
| #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) | |
| #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) | |
| #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) | |
| #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) | |
| #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) | |
| #define _TIF_SSBD (1 << TIF_SSBD) | |
| #define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) | |
| #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) | |
| #define _TIF_SECCOMP (1 << TIF_SECCOMP) | |
| #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY) | |
| #define _TIF_UPROBE (1 << TIF_UPROBE) | |
| #define _TIF_PATCH_PENDING (1 << TIF_PATCH_PENDING) | |
| #define _TIF_NOCPUID (1 << TIF_NOCPUID) | |
| #define _TIF_NOTSC (1 << TIF_NOTSC) | |
| #define _TIF_IA32 (1 << TIF_IA32) | |
| #define _TIF_NOHZ (1 << TIF_NOHZ) | |
| #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) | |
| #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) | |
| #define _TIF_FORCED_TF (1 << TIF_FORCED_TF) | |
| #define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP) | |
| #define _TIF_LAZY_MMU_UPDATES (1 << TIF_LAZY_MMU_UPDATES) | |
| #define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) | |
| #define _TIF_ADDR32 (1 << TIF_ADDR32) | |
| #define _TIF_X32 (1 << TIF_X32) | |
| #define _TIF_FSCHECK (1 << TIF_FSCHECK) | |
| /* | |
| * work to do in syscall_trace_enter(). Also includes TIF_NOHZ for | |
| * enter_from_user_mode() | |
| */ | |
| #define _TIF_WORK_SYSCALL_ENTRY \ | |
| (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT | \ | |
| _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT | \ | |
| _TIF_NOHZ) | |
| /* work to do on any return to user space */ | |
| #define _TIF_ALLWORK_MASK \ | |
| (_TIF_SYSCALL_TRACE | _TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \ | |
| _TIF_NEED_RESCHED | _TIF_SINGLESTEP | _TIF_SYSCALL_EMU | \ | |
| _TIF_SYSCALL_AUDIT | _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE | \ | |
| _TIF_PATCH_PENDING | _TIF_NOHZ | _TIF_SYSCALL_TRACEPOINT | \ | |
| _TIF_FSCHECK) | |
| /* flags to check in __switch_to() */ | |
| #define _TIF_WORK_CTXSW \ | |
| (_TIF_IO_BITMAP|_TIF_NOCPUID|_TIF_NOTSC|_TIF_BLOCKSTEP|_TIF_SSBD) | |
| #define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY) | |
| #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW) | |
| #define STACK_WARN (THREAD_SIZE/8) | |
| /* | |
| * macros/functions for gaining access to the thread information structure | |
| * | |
| * preempt_count needs to be 1 initially, until the scheduler is functional. | |
| */ | |
| #ifndef __ASSEMBLY__ | |
| /* | |
| * Walks up the stack frames to make sure that the specified object is | |
| * entirely contained by a single stack frame. | |
| * | |
| * Returns: | |
| * GOOD_FRAME if within a frame | |
| * BAD_STACK if placed across a frame boundary (or outside stack) | |
| * NOT_STACK unable to determine (no frame pointers, etc) | |
| */ | |
| static inline int arch_within_stack_frames(const void * const stack, | |
| const void * const stackend, | |
| const void *obj, unsigned long len) | |
| { | |
| #if defined(CONFIG_FRAME_POINTER) | |
| const void *frame = NULL; | |
| const void *oldframe; | |
| oldframe = __builtin_frame_address(1); | |
| if (oldframe) | |
| frame = __builtin_frame_address(2); | |
| /* | |
| * low ----------------------------------------------> high | |
| * [saved bp][saved ip][args][local vars][saved bp][saved ip] | |
| * ^----------------^ | |
| * allow copies only within here | |
| */ | |
| while (stack <= frame && frame < stackend) { | |
| /* | |
| * If obj + len extends past the last frame, this | |
| * check won't pass and the next frame will be 0, | |
| * causing us to bail out and correctly report | |
| * the copy as invalid. | |
| */ | |
| if (obj + len <= frame) | |
| return obj >= oldframe + 2 * sizeof(void *) ? | |
| GOOD_FRAME : BAD_STACK; | |
| oldframe = frame; | |
| frame = *(const void * const *)frame; | |
| } | |
| return BAD_STACK; | |
| #else | |
| return NOT_STACK; | |
| #endif | |
| } | |
| #else /* !__ASSEMBLY__ */ | |
| #ifdef CONFIG_X86_64 | |
| # define cpu_current_top_of_stack (cpu_tss_rw + TSS_sp1) | |
| #endif | |
| #endif | |
| #ifdef CONFIG_COMPAT | |
| #define TS_I386_REGS_POKED 0x0004 /* regs poked by 32-bit ptracer */ | |
| #endif | |
| #ifndef __ASSEMBLY__ | |
| #ifdef CONFIG_X86_32 | |
| #define in_ia32_syscall() true | |
| #else | |
| #define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \ | |
| current_thread_info()->status & TS_COMPAT) | |
| #endif | |
| /* | |
| * Force syscall return via IRET by making it look as if there was | |
| * some work pending. IRET is our most capable (but slowest) syscall | |
| * return path, which is able to restore modified SS, CS and certain | |
| * EFLAGS values that other (fast) syscall return instructions | |
| * are not able to restore properly. | |
| */ | |
| #define force_iret() set_thread_flag(TIF_NOTIFY_RESUME) | |
| extern void arch_task_cache_init(void); | |
| extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src); | |
| extern void arch_release_task_struct(struct task_struct *tsk); | |
| extern void arch_setup_new_exec(void); | |
| #define arch_setup_new_exec arch_setup_new_exec | |
| #endif /* !__ASSEMBLY__ */ | |
| #endif /* _ASM_X86_THREAD_INFO_H */ |