| * Qualcomm Technologies, Inc. MSM CSI Phy |
| |
| Required properties: |
| - cell-index: csi phy hardware core index |
| - compatible : |
| - "qcom,csiphy" |
| - "qcom,csiphy-v2.0" |
| - "qcom,csiphy-v2.2" |
| - "qcom,csiphy-v3.0" |
| - "qcom,csiphy-v3.1" |
| - "qcom,csiphy-v3.1.1" |
| - "qcom,csiphy-v3.2" |
| - "qcom,csiphy-v3.4.2" |
| - "qcom,csiphy-v3.5" |
| - "qcom,csiphy-v5.0" |
| - "qcom,csiphy-v5.01" |
| - "qcom,csiphy-v10.00" |
| - reg : offset and length of the register set for the device |
| for the csiphy operating in compatible mode. |
| - reg-names : should specify relevant names to each reg property defined. |
| - interrupts : should contain the csiphy interrupt. |
| - interrupt-names : should specify relevant names to each interrupts |
| property defined. |
| - clock-names: name of the clocks required for the device |
| - qcom,clock-rates: clock rate in Hz |
| - 0 if appropriate clock is required but doesn't have to apply the rate |
| |
| Example: |
| |
| qcom,csiphy@fda0ac00 { |
| cell-index = <0>; |
| compatible = "qcom,csiphy-v2.0", "qcom,csiphy"; |
| reg = <0xfda0ac00 0x200>; |
| reg-names = "csiphy"; |
| interrupts = <0 78 0>; |
| interrupt-names = "csiphy"; |
| clock-names = "camss_top_ahb_clk", |
| "ispif_ahb_clk", "csiphy_timer_src_clk", |
| "csiphy_timer_clk"; |
| qcom,clock-rates = <0 0 200000000 0>; |
| }; |
