| Marvell Armada CP110 System Controller |
| ====================================== |
| |
| The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K |
| SoCs. It contains system controllers, which provide several registers |
| giving access to numerous features: clocks, pin-muxing and many other |
| SoC configuration items. This DT binding allows to describe these |
| system controllers. |
| |
| For the top level node: |
| - compatible: must be: "syscon", "simple-mfd"; |
| - reg: register area of the CP110 system controller |
| |
| SYSTEM CONTROLLER 0 |
| =================== |
| |
| Clocks: |
| ------- |
| |
| The Device Tree node representing this System Controller 0 provides a |
| number of clocks: |
| |
| - a set of core clocks |
| - a set of gatable clocks |
| |
| Those clocks can be referenced by other Device Tree nodes using two |
| cells: |
| - The first cell must be 0 or 1. 0 for the core clocks and 1 for the |
| gatable clocks. |
| - The second cell identifies the particular core clock or gatable |
| clocks. |
| |
| The following clocks are available: |
| - Core clocks |
| - 0 0 APLL |
| - 0 1 PPv2 core |
| - 0 2 EIP |
| - 0 3 Core |
| - 0 4 NAND core |
| - 0 5 SDIO core |
| - Gatable clocks |
| - 1 0 Audio |
| - 1 1 Comm Unit |
| - 1 2 NAND |
| - 1 3 PPv2 |
| - 1 4 SDIO |
| - 1 5 MG Domain |
| - 1 6 MG Core |
| - 1 7 XOR1 |
| - 1 8 XOR0 |
| - 1 9 GOP DP |
| - 1 11 PCIe x1 0 |
| - 1 12 PCIe x1 1 |
| - 1 13 PCIe x4 |
| - 1 14 PCIe / XOR |
| - 1 15 SATA |
| - 1 16 SATA USB |
| - 1 17 Main |
| - 1 18 SD/MMC/GOP |
| - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) |
| - 1 22 USB3H0 |
| - 1 23 USB3H1 |
| - 1 24 USB3 Device |
| - 1 25 EIP150 |
| - 1 26 EIP197 |
| |
| Required properties: |
| |
| - compatible: must be: |
| "marvell,cp110-clock" |
| - #clock-cells: must be set to 2 |
| |
| Pinctrl: |
| -------- |
| |
| For common binding part and usage, refer to the file |
| Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. |
| |
| Required properties: |
| |
| - compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl", |
| "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl" |
| depending on the specific variant of the SoC being used. |
| |
| Available mpp pins/groups and functions: |
| Note: brackets (x) are not part of the mpp name for marvell,function and given |
| only for more detailed description in this document. |
| |
| name pins functions |
| ================================================================================ |
| mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio) |
| mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc) |
| mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc) |
| mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio) |
| mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc) |
| mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio) |
| mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse) |
| mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk) |
| mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk) |
| mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk) |
| mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act) |
| mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act) |
| mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk) |
| mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso) |
| mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn) |
| mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp) |
| mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk) |
| mpp17 17 gpio, dev(ad5), ge0(txd3) |
| mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp) |
| mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp) |
| mpp20 20 gpio, dev(ad2), ge0(txd0) |
| mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp) |
| mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp) |
| mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp) |
| mpp24 24 gpio, dev(a0), au(i2slrclk) |
| mpp25 25 gpio, dev(oen), au(i2sdo_spdifo) |
| mpp26 26 gpio, dev(wen0), au(i2sbclk) |
| mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp) |
| mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data) |
| mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb) |
| mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk) |
| mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc) |
| mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0 |
| mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1 |
| mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2 |
| mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3 |
| mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5 |
| mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp) |
| mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp) |
| mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0 |
| mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1 |
| mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp) |
| mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4 |
| mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp) |
| mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp) |
| mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn) |
| mpp46 46 gpio, ge1(txd1), uart1(rts) |
| mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc) |
| mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp) |
| mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp) |
| mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11) |
| mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) |
| mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) |
| mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) |
| mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect) |
| mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect) |
| mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) |
| mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) |
| mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) |
| mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1) |
| mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2) |
| mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3) |
| mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc) |
| |
| GPIO: |
| ----- |
| |
| For common binding part and usage, refer to |
| Documentation/devicetree/bindings/gpio/gpio-mvebu.txt. |
| |
| Required properties: |
| |
| - compatible: "marvell,armada-8k-gpio" |
| |
| - offset: offset address inside the syscon block |
| |
| Example: |
| |
| CP110_LABEL(syscon0): system-controller@440000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x440000 0x1000>; |
| |
| CP110_LABEL(clk): clock { |
| compatible = "marvell,cp110-clock"; |
| #clock-cells = <2>; |
| }; |
| |
| CP110_LABEL(pinctrl): pinctrl { |
| compatible = "marvell,armada-8k-cpm-pinctrl"; |
| }; |
| |
| CP110_LABEL(gpio1): gpio@100 { |
| compatible = "marvell,armada-8k-gpio"; |
| offset = <0x100>; |
| ngpios = <32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; |
| }; |
| |
| }; |
| |
| SYSTEM CONTROLLER 1 |
| =================== |
| |
| Thermal: |
| -------- |
| |
| The thermal IP can probe the temperature all around the processor. It |
| may feature several channels, each of them wired to one sensor. |
| |
| It is possible to setup an overheat interrupt by giving at least one |
| critical point to any subnode of the thermal-zone node. |
| |
| For common binding part and usage, refer to |
| Documentation/devicetree/bindings/thermal/thermal.txt |
| |
| Required properties: |
| - compatible: must be one of: |
| * marvell,armada-cp110-thermal |
| - reg: register range associated with the thermal functions. |
| |
| Optional properties: |
| - interrupts-extended: overheat interrupt handle. Should point to |
| a line of the ICU-SEI irqchip (116 is what is usually used by the |
| firmware). The ICU-SEI will redirect towards interrupt line #37 of the |
| AP SEI which is shared across all CPs. |
| See interrupt-controller/interrupts.txt |
| - #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer |
| to this IP and represents the channel ID. There is one sensor per |
| channel. O refers to the thermal IP internal channel. |
| |
| Example: |
| CP110_LABEL(syscon1): system-controller@6f8000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x6f8000 0x1000>; |
| |
| CP110_LABEL(thermal): thermal-sensor@70 { |
| compatible = "marvell,armada-cp110-thermal"; |
| reg = <0x70 0x10>; |
| interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
