| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PCI Express I/O Virtualization (IOV) support |
| * Single Root IOV 1.0 |
| * Address Translation Service 1.0 |
| * |
| * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/export.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/pci-ats.h> |
| #include "pci.h" |
| |
| #define VIRTFN_ID_LEN 16 |
| |
| int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id) |
| { |
| if (!dev->is_physfn) |
| return -EINVAL; |
| return dev->bus->number + ((dev->devfn + dev->sriov->offset + |
| dev->sriov->stride * vf_id) >> 8); |
| } |
| |
| int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id) |
| { |
| if (!dev->is_physfn) |
| return -EINVAL; |
| return (dev->devfn + dev->sriov->offset + |
| dev->sriov->stride * vf_id) & 0xff; |
| } |
| |
| /* |
| * Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may |
| * change when NumVFs changes. |
| * |
| * Update iov->offset and iov->stride when NumVFs is written. |
| */ |
| static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn) |
| { |
| struct pci_sriov *iov = dev->sriov; |
| |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn); |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &iov->offset); |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &iov->stride); |
| } |
| |
| /* |
| * The PF consumes one bus number. NumVFs, First VF Offset, and VF Stride |
| * determine how many additional bus numbers will be consumed by VFs. |
| * |
| * Iterate over all valid NumVFs, validate offset and stride, and calculate |
| * the maximum number of bus numbers that could ever be required. |
| */ |
| static int compute_max_vf_buses(struct pci_dev *dev) |
| { |
| struct pci_sriov *iov = dev->sriov; |
| int nr_virtfn, busnr, rc = 0; |
| |
| for (nr_virtfn = iov->total_VFs; nr_virtfn; nr_virtfn--) { |
| pci_iov_set_numvfs(dev, nr_virtfn); |
| if (!iov->offset || (nr_virtfn > 1 && !iov->stride)) { |
| rc = -EIO; |
| goto out; |
| } |
| |
| busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1); |
| if (busnr > iov->max_VF_buses) |
| iov->max_VF_buses = busnr; |
| } |
| |
| out: |
| pci_iov_set_numvfs(dev, 0); |
| return rc; |
| } |
| |
| static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr) |
| { |
| struct pci_bus *child; |
| |
| if (bus->number == busnr) |
| return bus; |
| |
| child = pci_find_bus(pci_domain_nr(bus), busnr); |
| if (child) |
| return child; |
| |
| child = pci_add_new_bus(bus, NULL, busnr); |
| if (!child) |
| return NULL; |
| |
| pci_bus_insert_busn_res(child, busnr, busnr); |
| |
| return child; |
| } |
| |
| static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus) |
| { |
| if (physbus != virtbus && list_empty(&virtbus->devices)) |
| pci_remove_bus(virtbus); |
| } |
| |
| resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno) |
| { |
| if (!dev->is_physfn) |
| return 0; |
| |
| return dev->sriov->barsz[resno - PCI_IOV_RESOURCES]; |
| } |
| |
| static void pci_read_vf_config_common(struct pci_dev *virtfn) |
| { |
| struct pci_dev *physfn = virtfn->physfn; |
| |
| /* |
| * Some config registers are the same across all associated VFs. |
| * Read them once from VF0 so we can skip reading them from the |
| * other VFs. |
| * |
| * PCIe r4.0, sec 9.3.4.1, technically doesn't require all VFs to |
| * have the same Revision ID and Subsystem ID, but we assume they |
| * do. |
| */ |
| pci_read_config_dword(virtfn, PCI_CLASS_REVISION, |
| &physfn->sriov->class); |
| pci_read_config_byte(virtfn, PCI_HEADER_TYPE, |
| &physfn->sriov->hdr_type); |
| pci_read_config_word(virtfn, PCI_SUBSYSTEM_VENDOR_ID, |
| &physfn->sriov->subsystem_vendor); |
| pci_read_config_word(virtfn, PCI_SUBSYSTEM_ID, |
| &physfn->sriov->subsystem_device); |
| } |
| |
| int pci_iov_add_virtfn(struct pci_dev *dev, int id) |
| { |
| int i; |
| int rc = -ENOMEM; |
| u64 size; |
| char buf[VIRTFN_ID_LEN]; |
| struct pci_dev *virtfn; |
| struct resource *res; |
| struct pci_sriov *iov = dev->sriov; |
| struct pci_bus *bus; |
| |
| bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id)); |
| if (!bus) |
| goto failed; |
| |
| virtfn = pci_alloc_dev(bus); |
| if (!virtfn) |
| goto failed0; |
| |
| virtfn->devfn = pci_iov_virtfn_devfn(dev, id); |
| virtfn->vendor = dev->vendor; |
| virtfn->device = iov->vf_device; |
| virtfn->is_virtfn = 1; |
| virtfn->physfn = pci_dev_get(dev); |
| |
| if (id == 0) |
| pci_read_vf_config_common(virtfn); |
| |
| rc = pci_setup_device(virtfn); |
| if (rc) |
| goto failed1; |
| |
| virtfn->dev.parent = dev->dev.parent; |
| virtfn->multifunction = 0; |
| |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { |
| res = &dev->resource[i + PCI_IOV_RESOURCES]; |
| if (!res->parent) |
| continue; |
| virtfn->resource[i].name = pci_name(virtfn); |
| virtfn->resource[i].flags = res->flags; |
| size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES); |
| virtfn->resource[i].start = res->start + size * id; |
| virtfn->resource[i].end = virtfn->resource[i].start + size - 1; |
| rc = request_resource(res, &virtfn->resource[i]); |
| BUG_ON(rc); |
| } |
| |
| pci_device_add(virtfn, virtfn->bus); |
| |
| sprintf(buf, "virtfn%u", id); |
| rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf); |
| if (rc) |
| goto failed2; |
| rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn"); |
| if (rc) |
| goto failed3; |
| |
| kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE); |
| |
| pci_bus_add_device(virtfn); |
| |
| return 0; |
| |
| failed3: |
| sysfs_remove_link(&dev->dev.kobj, buf); |
| failed2: |
| pci_stop_and_remove_bus_device(virtfn); |
| failed1: |
| pci_dev_put(dev); |
| failed0: |
| virtfn_remove_bus(dev->bus, bus); |
| failed: |
| |
| return rc; |
| } |
| |
| void pci_iov_remove_virtfn(struct pci_dev *dev, int id) |
| { |
| char buf[VIRTFN_ID_LEN]; |
| struct pci_dev *virtfn; |
| |
| virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), |
| pci_iov_virtfn_bus(dev, id), |
| pci_iov_virtfn_devfn(dev, id)); |
| if (!virtfn) |
| return; |
| |
| sprintf(buf, "virtfn%u", id); |
| sysfs_remove_link(&dev->dev.kobj, buf); |
| /* |
| * pci_stop_dev() could have been called for this virtfn already, |
| * so the directory for the virtfn may have been removed before. |
| * Double check to avoid spurious sysfs warnings. |
| */ |
| if (virtfn->dev.kobj.sd) |
| sysfs_remove_link(&virtfn->dev.kobj, "physfn"); |
| |
| pci_stop_and_remove_bus_device(virtfn); |
| virtfn_remove_bus(dev->bus, virtfn->bus); |
| |
| /* balance pci_get_domain_bus_and_slot() */ |
| pci_dev_put(virtfn); |
| pci_dev_put(dev); |
| } |
| |
| int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) |
| { |
| return 0; |
| } |
| |
| int __weak pcibios_sriov_disable(struct pci_dev *pdev) |
| { |
| return 0; |
| } |
| |
| static int sriov_enable(struct pci_dev *dev, int nr_virtfn) |
| { |
| int rc; |
| int i; |
| int nres; |
| u16 initial; |
| struct resource *res; |
| struct pci_dev *pdev; |
| struct pci_sriov *iov = dev->sriov; |
| int bars = 0; |
| int bus; |
| |
| if (!nr_virtfn) |
| return 0; |
| |
| if (iov->num_VFs) |
| return -EINVAL; |
| |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_INITIAL_VF, &initial); |
| if (initial > iov->total_VFs || |
| (!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total_VFs))) |
| return -EIO; |
| |
| if (nr_virtfn < 0 || nr_virtfn > iov->total_VFs || |
| (!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial))) |
| return -EINVAL; |
| |
| nres = 0; |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { |
| bars |= (1 << (i + PCI_IOV_RESOURCES)); |
| res = &dev->resource[i + PCI_IOV_RESOURCES]; |
| if (res->parent) |
| nres++; |
| } |
| if (nres != iov->nres) { |
| pci_err(dev, "not enough MMIO resources for SR-IOV\n"); |
| return -ENOMEM; |
| } |
| |
| bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1); |
| if (bus > dev->bus->busn_res.end) { |
| pci_err(dev, "can't enable %d VFs (bus %02x out of range of %pR)\n", |
| nr_virtfn, bus, &dev->bus->busn_res); |
| return -ENOMEM; |
| } |
| |
| if (pci_enable_resources(dev, bars)) { |
| pci_err(dev, "SR-IOV: IOV BARS not allocated\n"); |
| return -ENOMEM; |
| } |
| |
| if (iov->link != dev->devfn) { |
| pdev = pci_get_slot(dev->bus, iov->link); |
| if (!pdev) |
| return -ENODEV; |
| |
| if (!pdev->is_physfn) { |
| pci_dev_put(pdev); |
| return -ENOSYS; |
| } |
| |
| rc = sysfs_create_link(&dev->dev.kobj, |
| &pdev->dev.kobj, "dep_link"); |
| pci_dev_put(pdev); |
| if (rc) |
| return rc; |
| } |
| |
| iov->initial_VFs = initial; |
| if (nr_virtfn < initial) |
| initial = nr_virtfn; |
| |
| rc = pcibios_sriov_enable(dev, initial); |
| if (rc) { |
| pci_err(dev, "failure %d from pcibios_sriov_enable()\n", rc); |
| goto err_pcibios; |
| } |
| |
| pci_iov_set_numvfs(dev, nr_virtfn); |
| iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE; |
| pci_cfg_access_lock(dev); |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); |
| msleep(100); |
| pci_cfg_access_unlock(dev); |
| |
| for (i = 0; i < initial; i++) { |
| rc = pci_iov_add_virtfn(dev, i); |
| if (rc) |
| goto failed; |
| } |
| |
| kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE); |
| iov->num_VFs = nr_virtfn; |
| |
| return 0; |
| |
| failed: |
| while (i--) |
| pci_iov_remove_virtfn(dev, i); |
| |
| err_pcibios: |
| iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); |
| pci_cfg_access_lock(dev); |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); |
| ssleep(1); |
| pci_cfg_access_unlock(dev); |
| |
| pcibios_sriov_disable(dev); |
| |
| if (iov->link != dev->devfn) |
| sysfs_remove_link(&dev->dev.kobj, "dep_link"); |
| |
| pci_iov_set_numvfs(dev, 0); |
| return rc; |
| } |
| |
| static void sriov_disable(struct pci_dev *dev) |
| { |
| int i; |
| struct pci_sriov *iov = dev->sriov; |
| |
| if (!iov->num_VFs) |
| return; |
| |
| for (i = 0; i < iov->num_VFs; i++) |
| pci_iov_remove_virtfn(dev, i); |
| |
| iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); |
| pci_cfg_access_lock(dev); |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); |
| ssleep(1); |
| pci_cfg_access_unlock(dev); |
| |
| pcibios_sriov_disable(dev); |
| |
| if (iov->link != dev->devfn) |
| sysfs_remove_link(&dev->dev.kobj, "dep_link"); |
| |
| iov->num_VFs = 0; |
| pci_iov_set_numvfs(dev, 0); |
| } |
| |
| static int sriov_init(struct pci_dev *dev, int pos) |
| { |
| int i, bar64; |
| int rc; |
| int nres; |
| u32 pgsz; |
| u16 ctrl, total; |
| struct pci_sriov *iov; |
| struct resource *res; |
| struct pci_dev *pdev; |
| |
| pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl); |
| if (ctrl & PCI_SRIOV_CTRL_VFE) { |
| pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0); |
| ssleep(1); |
| } |
| |
| ctrl = 0; |
| list_for_each_entry(pdev, &dev->bus->devices, bus_list) |
| if (pdev->is_physfn) |
| goto found; |
| |
| pdev = NULL; |
| if (pci_ari_enabled(dev->bus)) |
| ctrl |= PCI_SRIOV_CTRL_ARI; |
| |
| found: |
| pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl); |
| |
| pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &total); |
| if (!total) |
| return 0; |
| |
| pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &pgsz); |
| i = PAGE_SHIFT > 12 ? PAGE_SHIFT - 12 : 0; |
| pgsz &= ~((1 << i) - 1); |
| if (!pgsz) |
| return -EIO; |
| |
| pgsz &= ~(pgsz - 1); |
| pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz); |
| |
| iov = kzalloc(sizeof(*iov), GFP_KERNEL); |
| if (!iov) |
| return -ENOMEM; |
| |
| nres = 0; |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { |
| res = &dev->resource[i + PCI_IOV_RESOURCES]; |
| /* |
| * If it is already FIXED, don't change it, something |
| * (perhaps EA or header fixups) wants it this way. |
| */ |
| if (res->flags & IORESOURCE_PCI_FIXED) |
| bar64 = (res->flags & IORESOURCE_MEM_64) ? 1 : 0; |
| else |
| bar64 = __pci_read_base(dev, pci_bar_unknown, res, |
| pos + PCI_SRIOV_BAR + i * 4); |
| if (!res->flags) |
| continue; |
| if (resource_size(res) & (PAGE_SIZE - 1)) { |
| rc = -EIO; |
| goto failed; |
| } |
| iov->barsz[i] = resource_size(res); |
| res->end = res->start + resource_size(res) * total - 1; |
| pci_info(dev, "VF(n) BAR%d space: %pR (contains BAR%d for %d VFs)\n", |
| i, res, i, total); |
| i += bar64; |
| nres++; |
| } |
| |
| iov->pos = pos; |
| iov->nres = nres; |
| iov->ctrl = ctrl; |
| iov->total_VFs = total; |
| iov->driver_max_VFs = total; |
| pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &iov->vf_device); |
| iov->pgsz = pgsz; |
| iov->self = dev; |
| iov->drivers_autoprobe = true; |
| pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); |
| pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); |
| if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) |
| iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link); |
| |
| if (pdev) |
| iov->dev = pci_dev_get(pdev); |
| else |
| iov->dev = dev; |
| |
| dev->sriov = iov; |
| dev->is_physfn = 1; |
| rc = compute_max_vf_buses(dev); |
| if (rc) |
| goto fail_max_buses; |
| |
| return 0; |
| |
| fail_max_buses: |
| dev->sriov = NULL; |
| dev->is_physfn = 0; |
| failed: |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { |
| res = &dev->resource[i + PCI_IOV_RESOURCES]; |
| res->flags = 0; |
| } |
| |
| kfree(iov); |
| return rc; |
| } |
| |
| static void sriov_release(struct pci_dev *dev) |
| { |
| BUG_ON(dev->sriov->num_VFs); |
| |
| if (dev != dev->sriov->dev) |
| pci_dev_put(dev->sriov->dev); |
| |
| kfree(dev->sriov); |
| dev->sriov = NULL; |
| } |
| |
| static void sriov_restore_state(struct pci_dev *dev) |
| { |
| int i; |
| u16 ctrl; |
| struct pci_sriov *iov = dev->sriov; |
| |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &ctrl); |
| if (ctrl & PCI_SRIOV_CTRL_VFE) |
| return; |
| |
| /* |
| * Restore PCI_SRIOV_CTRL_ARI before pci_iov_set_numvfs() because |
| * it reads offset & stride, which depend on PCI_SRIOV_CTRL_ARI. |
| */ |
| ctrl &= ~PCI_SRIOV_CTRL_ARI; |
| ctrl |= iov->ctrl & PCI_SRIOV_CTRL_ARI; |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, ctrl); |
| |
| for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) |
| pci_update_resource(dev, i); |
| |
| pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz); |
| pci_iov_set_numvfs(dev, iov->num_VFs); |
| pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); |
| if (iov->ctrl & PCI_SRIOV_CTRL_VFE) |
| msleep(100); |
| } |
| |
| /** |
| * pci_iov_init - initialize the IOV capability |
| * @dev: the PCI device |
| * |
| * Returns 0 on success, or negative on failure. |
| */ |
| int pci_iov_init(struct pci_dev *dev) |
| { |
| int pos; |
| |
| if (!pci_is_pcie(dev)) |
| return -ENODEV; |
| |
| pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); |
| if (pos) |
| return sriov_init(dev, pos); |
| |
| return -ENODEV; |
| } |
| |
| /** |
| * pci_iov_release - release resources used by the IOV capability |
| * @dev: the PCI device |
| */ |
| void pci_iov_release(struct pci_dev *dev) |
| { |
| if (dev->is_physfn) |
| sriov_release(dev); |
| } |
| |
| /** |
| * pci_iov_remove - clean up SR-IOV state after PF driver is detached |
| * @dev: the PCI device |
| */ |
| void pci_iov_remove(struct pci_dev *dev) |
| { |
| struct pci_sriov *iov = dev->sriov; |
| |
| if (!dev->is_physfn) |
| return; |
| |
| iov->driver_max_VFs = iov->total_VFs; |
| if (iov->num_VFs) |
| pci_warn(dev, "driver left SR-IOV enabled after remove\n"); |
| } |
| |
| /** |
| * pci_iov_update_resource - update a VF BAR |
| * @dev: the PCI device |
| * @resno: the resource number |
| * |
| * Update a VF BAR in the SR-IOV capability of a PF. |
| */ |
| void pci_iov_update_resource(struct pci_dev *dev, int resno) |
| { |
| struct pci_sriov *iov = dev->is_physfn ? dev->sriov : NULL; |
| struct resource *res = dev->resource + resno; |
| int vf_bar = resno - PCI_IOV_RESOURCES; |
| struct pci_bus_region region; |
| u16 cmd; |
| u32 new; |
| int reg; |
| |
| /* |
| * The generic pci_restore_bars() path calls this for all devices, |
| * including VFs and non-SR-IOV devices. If this is not a PF, we |
| * have nothing to do. |
| */ |
| if (!iov) |
| return; |
| |
| pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &cmd); |
| if ((cmd & PCI_SRIOV_CTRL_VFE) && (cmd & PCI_SRIOV_CTRL_MSE)) { |
| dev_WARN(&dev->dev, "can't update enabled VF BAR%d %pR\n", |
| vf_bar, res); |
| return; |
| } |
| |
| /* |
| * Ignore unimplemented BARs, unused resource slots for 64-bit |
| * BARs, and non-movable resources, e.g., those described via |
| * Enhanced Allocation. |
| */ |
| if (!res->flags) |
| return; |
| |
| if (res->flags & IORESOURCE_UNSET) |
| return; |
| |
| if (res->flags & IORESOURCE_PCI_FIXED) |
| return; |
| |
| pcibios_resource_to_bus(dev->bus, ®ion, res); |
| new = region.start; |
| new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK; |
| |
| reg = iov->pos + PCI_SRIOV_BAR + 4 * vf_bar; |
| pci_write_config_dword(dev, reg, new); |
| if (res->flags & IORESOURCE_MEM_64) { |
| new = region.start >> 16 >> 16; |
| pci_write_config_dword(dev, reg + 4, new); |
| } |
| } |
| |
| resource_size_t __weak pcibios_iov_resource_alignment(struct pci_dev *dev, |
| int resno) |
| { |
| return pci_iov_resource_size(dev, resno); |
| } |
| |
| /** |
| * pci_sriov_resource_alignment - get resource alignment for VF BAR |
| * @dev: the PCI device |
| * @resno: the resource number |
| * |
| * Returns the alignment of the VF BAR found in the SR-IOV capability. |
| * This is not the same as the resource size which is defined as |
| * the VF BAR size multiplied by the number of VFs. The alignment |
| * is just the VF BAR size. |
| */ |
| resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno) |
| { |
| return pcibios_iov_resource_alignment(dev, resno); |
| } |
| |
| /** |
| * pci_restore_iov_state - restore the state of the IOV capability |
| * @dev: the PCI device |
| */ |
| void pci_restore_iov_state(struct pci_dev *dev) |
| { |
| if (dev->is_physfn) |
| sriov_restore_state(dev); |
| } |
| |
| /** |
| * pci_vf_drivers_autoprobe - set PF property drivers_autoprobe for VFs |
| * @dev: the PCI device |
| * @auto_probe: set VF drivers auto probe flag |
| */ |
| void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool auto_probe) |
| { |
| if (dev->is_physfn) |
| dev->sriov->drivers_autoprobe = auto_probe; |
| } |
| |
| /** |
| * pci_iov_bus_range - find bus range used by Virtual Function |
| * @bus: the PCI bus |
| * |
| * Returns max number of buses (exclude current one) used by Virtual |
| * Functions. |
| */ |
| int pci_iov_bus_range(struct pci_bus *bus) |
| { |
| int max = 0; |
| struct pci_dev *dev; |
| |
| list_for_each_entry(dev, &bus->devices, bus_list) { |
| if (!dev->is_physfn) |
| continue; |
| if (dev->sriov->max_VF_buses > max) |
| max = dev->sriov->max_VF_buses; |
| } |
| |
| return max ? max - bus->number : 0; |
| } |
| |
| /** |
| * pci_enable_sriov - enable the SR-IOV capability |
| * @dev: the PCI device |
| * @nr_virtfn: number of virtual functions to enable |
| * |
| * Returns 0 on success, or negative on failure. |
| */ |
| int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) |
| { |
| might_sleep(); |
| |
| if (!dev->is_physfn) |
| return -ENOSYS; |
| |
| return sriov_enable(dev, nr_virtfn); |
| } |
| EXPORT_SYMBOL_GPL(pci_enable_sriov); |
| |
| /** |
| * pci_disable_sriov - disable the SR-IOV capability |
| * @dev: the PCI device |
| */ |
| void pci_disable_sriov(struct pci_dev *dev) |
| { |
| might_sleep(); |
| |
| if (!dev->is_physfn) |
| return; |
| |
| sriov_disable(dev); |
| } |
| EXPORT_SYMBOL_GPL(pci_disable_sriov); |
| |
| /** |
| * pci_num_vf - return number of VFs associated with a PF device_release_driver |
| * @dev: the PCI device |
| * |
| * Returns number of VFs, or 0 if SR-IOV is not enabled. |
| */ |
| int pci_num_vf(struct pci_dev *dev) |
| { |
| if (!dev->is_physfn) |
| return 0; |
| |
| return dev->sriov->num_VFs; |
| } |
| EXPORT_SYMBOL_GPL(pci_num_vf); |
| |
| /** |
| * pci_vfs_assigned - returns number of VFs are assigned to a guest |
| * @dev: the PCI device |
| * |
| * Returns number of VFs belonging to this device that are assigned to a guest. |
| * If device is not a physical function returns 0. |
| */ |
| int pci_vfs_assigned(struct pci_dev *dev) |
| { |
| struct pci_dev *vfdev; |
| unsigned int vfs_assigned = 0; |
| unsigned short dev_id; |
| |
| /* only search if we are a PF */ |
| if (!dev->is_physfn) |
| return 0; |
| |
| /* |
| * determine the device ID for the VFs, the vendor ID will be the |
| * same as the PF so there is no need to check for that one |
| */ |
| dev_id = dev->sriov->vf_device; |
| |
| /* loop through all the VFs to see if we own any that are assigned */ |
| vfdev = pci_get_device(dev->vendor, dev_id, NULL); |
| while (vfdev) { |
| /* |
| * It is considered assigned if it is a virtual function with |
| * our dev as the physical function and the assigned bit is set |
| */ |
| if (vfdev->is_virtfn && (vfdev->physfn == dev) && |
| pci_is_dev_assigned(vfdev)) |
| vfs_assigned++; |
| |
| vfdev = pci_get_device(dev->vendor, dev_id, vfdev); |
| } |
| |
| return vfs_assigned; |
| } |
| EXPORT_SYMBOL_GPL(pci_vfs_assigned); |
| |
| /** |
| * pci_sriov_set_totalvfs -- reduce the TotalVFs available |
| * @dev: the PCI PF device |
| * @numvfs: number that should be used for TotalVFs supported |
| * |
| * Should be called from PF driver's probe routine with |
| * device's mutex held. |
| * |
| * Returns 0 if PF is an SRIOV-capable device and |
| * value of numvfs valid. If not a PF return -ENOSYS; |
| * if numvfs is invalid return -EINVAL; |
| * if VFs already enabled, return -EBUSY. |
| */ |
| int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) |
| { |
| if (!dev->is_physfn) |
| return -ENOSYS; |
| if (numvfs > dev->sriov->total_VFs) |
| return -EINVAL; |
| |
| /* Shouldn't change if VFs already enabled */ |
| if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) |
| return -EBUSY; |
| else |
| dev->sriov->driver_max_VFs = numvfs; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs); |
| |
| /** |
| * pci_sriov_get_totalvfs -- get total VFs supported on this device |
| * @dev: the PCI PF device |
| * |
| * For a PCIe device with SRIOV support, return the PCIe |
| * SRIOV capability value of TotalVFs or the value of driver_max_VFs |
| * if the driver reduced it. Otherwise 0. |
| */ |
| int pci_sriov_get_totalvfs(struct pci_dev *dev) |
| { |
| if (!dev->is_physfn) |
| return 0; |
| |
| return dev->sriov->driver_max_VFs; |
| } |
| EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs); |
| |
| /** |
| * pci_sriov_configure_simple - helper to configure SR-IOV |
| * @dev: the PCI device |
| * @nr_virtfn: number of virtual functions to enable, 0 to disable |
| * |
| * Enable or disable SR-IOV for devices that don't require any PF setup |
| * before enabling SR-IOV. Return value is negative on error, or number of |
| * VFs allocated on success. |
| */ |
| int pci_sriov_configure_simple(struct pci_dev *dev, int nr_virtfn) |
| { |
| int rc; |
| |
| might_sleep(); |
| |
| if (!dev->is_physfn) |
| return -ENODEV; |
| |
| if (pci_vfs_assigned(dev)) { |
| pci_warn(dev, "Cannot modify SR-IOV while VFs are assigned\n"); |
| return -EPERM; |
| } |
| |
| if (nr_virtfn == 0) { |
| sriov_disable(dev); |
| return 0; |
| } |
| |
| rc = sriov_enable(dev, nr_virtfn); |
| if (rc < 0) |
| return rc; |
| |
| return nr_virtfn; |
| } |
| EXPORT_SYMBOL_GPL(pci_sriov_configure_simple); |