|  | /* | 
|  | *  linux/mm/vmscan.c | 
|  | * | 
|  | *  Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds | 
|  | * | 
|  | *  Swap reorganised 29.12.95, Stephen Tweedie. | 
|  | *  kswapd added: 7.1.96  sct | 
|  | *  Removed kswapd_ctl limits, and swap out as many pages as needed | 
|  | *  to bring the system back to freepages.high: 2.4.97, Rik van Riel. | 
|  | *  Zone aware kswapd started 02/00, Kanoj Sarcar (kanoj@sgi.com). | 
|  | *  Multiqueue VM started 5.8.00, Rik van Riel. | 
|  | */ | 
|  |  | 
|  | #include <linux/mm.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel_stat.h> | 
|  | #include <linux/swap.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/buffer_head.h>	/* for try_to_release_page(), | 
|  | buffer_heads_over_limit */ | 
|  | #include <linux/mm_inline.h> | 
|  | #include <linux/pagevec.h> | 
|  | #include <linux/backing-dev.h> | 
|  | #include <linux/rmap.h> | 
|  | #include <linux/topology.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/cpuset.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/rwsem.h> | 
|  |  | 
|  | #include <asm/tlbflush.h> | 
|  | #include <asm/div64.h> | 
|  |  | 
|  | #include <linux/swapops.h> | 
|  |  | 
|  | /* possible outcome of pageout() */ | 
|  | typedef enum { | 
|  | /* failed to write page out, page is locked */ | 
|  | PAGE_KEEP, | 
|  | /* move page to the active list, page is locked */ | 
|  | PAGE_ACTIVATE, | 
|  | /* page has been sent to the disk successfully, page is unlocked */ | 
|  | PAGE_SUCCESS, | 
|  | /* page is clean and locked */ | 
|  | PAGE_CLEAN, | 
|  | } pageout_t; | 
|  |  | 
|  | struct scan_control { | 
|  | /* Ask refill_inactive_zone, or shrink_cache to scan this many pages */ | 
|  | unsigned long nr_to_scan; | 
|  |  | 
|  | /* Incremented by the number of inactive pages that were scanned */ | 
|  | unsigned long nr_scanned; | 
|  |  | 
|  | /* Incremented by the number of pages reclaimed */ | 
|  | unsigned long nr_reclaimed; | 
|  |  | 
|  | unsigned long nr_mapped;	/* From page_state */ | 
|  |  | 
|  | /* How many pages shrink_cache() should reclaim */ | 
|  | int nr_to_reclaim; | 
|  |  | 
|  | /* Ask shrink_caches, or shrink_zone to scan at this priority */ | 
|  | unsigned int priority; | 
|  |  | 
|  | /* This context's GFP mask */ | 
|  | gfp_t gfp_mask; | 
|  |  | 
|  | int may_writepage; | 
|  |  | 
|  | /* Can pages be swapped as part of reclaim? */ | 
|  | int may_swap; | 
|  |  | 
|  | /* This context's SWAP_CLUSTER_MAX. If freeing memory for | 
|  | * suspend, we effectively ignore SWAP_CLUSTER_MAX. | 
|  | * In this context, it doesn't matter that we scan the | 
|  | * whole list at once. */ | 
|  | int swap_cluster_max; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The list of shrinker callbacks used by to apply pressure to | 
|  | * ageable caches. | 
|  | */ | 
|  | struct shrinker { | 
|  | shrinker_t		shrinker; | 
|  | struct list_head	list; | 
|  | int			seeks;	/* seeks to recreate an obj */ | 
|  | long			nr;	/* objs pending delete */ | 
|  | }; | 
|  |  | 
|  | #define lru_to_page(_head) (list_entry((_head)->prev, struct page, lru)) | 
|  |  | 
|  | #ifdef ARCH_HAS_PREFETCH | 
|  | #define prefetch_prev_lru_page(_page, _base, _field)			\ | 
|  | do {								\ | 
|  | if ((_page)->lru.prev != _base) {			\ | 
|  | struct page *prev;				\ | 
|  | \ | 
|  | prev = lru_to_page(&(_page->lru));		\ | 
|  | prefetch(&prev->_field);			\ | 
|  | }							\ | 
|  | } while (0) | 
|  | #else | 
|  | #define prefetch_prev_lru_page(_page, _base, _field) do { } while (0) | 
|  | #endif | 
|  |  | 
|  | #ifdef ARCH_HAS_PREFETCHW | 
|  | #define prefetchw_prev_lru_page(_page, _base, _field)			\ | 
|  | do {								\ | 
|  | if ((_page)->lru.prev != _base) {			\ | 
|  | struct page *prev;				\ | 
|  | \ | 
|  | prev = lru_to_page(&(_page->lru));		\ | 
|  | prefetchw(&prev->_field);			\ | 
|  | }							\ | 
|  | } while (0) | 
|  | #else | 
|  | #define prefetchw_prev_lru_page(_page, _base, _field) do { } while (0) | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * From 0 .. 100.  Higher means more swappy. | 
|  | */ | 
|  | int vm_swappiness = 60; | 
|  | static long total_memory; | 
|  |  | 
|  | static LIST_HEAD(shrinker_list); | 
|  | static DECLARE_RWSEM(shrinker_rwsem); | 
|  |  | 
|  | /* | 
|  | * Add a shrinker callback to be called from the vm | 
|  | */ | 
|  | struct shrinker *set_shrinker(int seeks, shrinker_t theshrinker) | 
|  | { | 
|  | struct shrinker *shrinker; | 
|  |  | 
|  | shrinker = kmalloc(sizeof(*shrinker), GFP_KERNEL); | 
|  | if (shrinker) { | 
|  | shrinker->shrinker = theshrinker; | 
|  | shrinker->seeks = seeks; | 
|  | shrinker->nr = 0; | 
|  | down_write(&shrinker_rwsem); | 
|  | list_add_tail(&shrinker->list, &shrinker_list); | 
|  | up_write(&shrinker_rwsem); | 
|  | } | 
|  | return shrinker; | 
|  | } | 
|  | EXPORT_SYMBOL(set_shrinker); | 
|  |  | 
|  | /* | 
|  | * Remove one | 
|  | */ | 
|  | void remove_shrinker(struct shrinker *shrinker) | 
|  | { | 
|  | down_write(&shrinker_rwsem); | 
|  | list_del(&shrinker->list); | 
|  | up_write(&shrinker_rwsem); | 
|  | kfree(shrinker); | 
|  | } | 
|  | EXPORT_SYMBOL(remove_shrinker); | 
|  |  | 
|  | #define SHRINK_BATCH 128 | 
|  | /* | 
|  | * Call the shrink functions to age shrinkable caches | 
|  | * | 
|  | * Here we assume it costs one seek to replace a lru page and that it also | 
|  | * takes a seek to recreate a cache object.  With this in mind we age equal | 
|  | * percentages of the lru and ageable caches.  This should balance the seeks | 
|  | * generated by these structures. | 
|  | * | 
|  | * If the vm encounted mapped pages on the LRU it increase the pressure on | 
|  | * slab to avoid swapping. | 
|  | * | 
|  | * We do weird things to avoid (scanned*seeks*entries) overflowing 32 bits. | 
|  | * | 
|  | * `lru_pages' represents the number of on-LRU pages in all the zones which | 
|  | * are eligible for the caller's allocation attempt.  It is used for balancing | 
|  | * slab reclaim versus page reclaim. | 
|  | * | 
|  | * Returns the number of slab objects which we shrunk. | 
|  | */ | 
|  | static int shrink_slab(unsigned long scanned, gfp_t gfp_mask, | 
|  | unsigned long lru_pages) | 
|  | { | 
|  | struct shrinker *shrinker; | 
|  | int ret = 0; | 
|  |  | 
|  | if (scanned == 0) | 
|  | scanned = SWAP_CLUSTER_MAX; | 
|  |  | 
|  | if (!down_read_trylock(&shrinker_rwsem)) | 
|  | return 1;	/* Assume we'll be able to shrink next time */ | 
|  |  | 
|  | list_for_each_entry(shrinker, &shrinker_list, list) { | 
|  | unsigned long long delta; | 
|  | unsigned long total_scan; | 
|  |  | 
|  | delta = (4 * scanned) / shrinker->seeks; | 
|  | delta *= (*shrinker->shrinker)(0, gfp_mask); | 
|  | do_div(delta, lru_pages + 1); | 
|  | shrinker->nr += delta; | 
|  | if (shrinker->nr < 0) | 
|  | shrinker->nr = LONG_MAX;	/* It wrapped! */ | 
|  |  | 
|  | total_scan = shrinker->nr; | 
|  | shrinker->nr = 0; | 
|  |  | 
|  | while (total_scan >= SHRINK_BATCH) { | 
|  | long this_scan = SHRINK_BATCH; | 
|  | int shrink_ret; | 
|  | int nr_before; | 
|  |  | 
|  | nr_before = (*shrinker->shrinker)(0, gfp_mask); | 
|  | shrink_ret = (*shrinker->shrinker)(this_scan, gfp_mask); | 
|  | if (shrink_ret == -1) | 
|  | break; | 
|  | if (shrink_ret < nr_before) | 
|  | ret += nr_before - shrink_ret; | 
|  | mod_page_state(slabs_scanned, this_scan); | 
|  | total_scan -= this_scan; | 
|  |  | 
|  | cond_resched(); | 
|  | } | 
|  |  | 
|  | shrinker->nr += total_scan; | 
|  | } | 
|  | up_read(&shrinker_rwsem); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Called without lock on whether page is mapped, so answer is unstable */ | 
|  | static inline int page_mapping_inuse(struct page *page) | 
|  | { | 
|  | struct address_space *mapping; | 
|  |  | 
|  | /* Page is in somebody's page tables. */ | 
|  | if (page_mapped(page)) | 
|  | return 1; | 
|  |  | 
|  | /* Be more reluctant to reclaim swapcache than pagecache */ | 
|  | if (PageSwapCache(page)) | 
|  | return 1; | 
|  |  | 
|  | mapping = page_mapping(page); | 
|  | if (!mapping) | 
|  | return 0; | 
|  |  | 
|  | /* File is mmap'd by somebody? */ | 
|  | return mapping_mapped(mapping); | 
|  | } | 
|  |  | 
|  | static inline int is_page_cache_freeable(struct page *page) | 
|  | { | 
|  | return page_count(page) - !!PagePrivate(page) == 2; | 
|  | } | 
|  |  | 
|  | static int may_write_to_queue(struct backing_dev_info *bdi) | 
|  | { | 
|  | if (current_is_kswapd()) | 
|  | return 1; | 
|  | if (current_is_pdflush())	/* This is unlikely, but why not... */ | 
|  | return 1; | 
|  | if (!bdi_write_congested(bdi)) | 
|  | return 1; | 
|  | if (bdi == current->backing_dev_info) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We detected a synchronous write error writing a page out.  Probably | 
|  | * -ENOSPC.  We need to propagate that into the address_space for a subsequent | 
|  | * fsync(), msync() or close(). | 
|  | * | 
|  | * The tricky part is that after writepage we cannot touch the mapping: nothing | 
|  | * prevents it from being freed up.  But we have a ref on the page and once | 
|  | * that page is locked, the mapping is pinned. | 
|  | * | 
|  | * We're allowed to run sleeping lock_page() here because we know the caller has | 
|  | * __GFP_FS. | 
|  | */ | 
|  | static void handle_write_error(struct address_space *mapping, | 
|  | struct page *page, int error) | 
|  | { | 
|  | lock_page(page); | 
|  | if (page_mapping(page) == mapping) { | 
|  | if (error == -ENOSPC) | 
|  | set_bit(AS_ENOSPC, &mapping->flags); | 
|  | else | 
|  | set_bit(AS_EIO, &mapping->flags); | 
|  | } | 
|  | unlock_page(page); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * pageout is called by shrink_list() for each dirty page. Calls ->writepage(). | 
|  | */ | 
|  | static pageout_t pageout(struct page *page, struct address_space *mapping) | 
|  | { | 
|  | /* | 
|  | * If the page is dirty, only perform writeback if that write | 
|  | * will be non-blocking.  To prevent this allocation from being | 
|  | * stalled by pagecache activity.  But note that there may be | 
|  | * stalls if we need to run get_block().  We could test | 
|  | * PagePrivate for that. | 
|  | * | 
|  | * If this process is currently in generic_file_write() against | 
|  | * this page's queue, we can perform writeback even if that | 
|  | * will block. | 
|  | * | 
|  | * If the page is swapcache, write it back even if that would | 
|  | * block, for some throttling. This happens by accident, because | 
|  | * swap_backing_dev_info is bust: it doesn't reflect the | 
|  | * congestion state of the swapdevs.  Easy to fix, if needed. | 
|  | * See swapfile.c:page_queue_congested(). | 
|  | */ | 
|  | if (!is_page_cache_freeable(page)) | 
|  | return PAGE_KEEP; | 
|  | if (!mapping) { | 
|  | /* | 
|  | * Some data journaling orphaned pages can have | 
|  | * page->mapping == NULL while being dirty with clean buffers. | 
|  | */ | 
|  | if (PagePrivate(page)) { | 
|  | if (try_to_free_buffers(page)) { | 
|  | ClearPageDirty(page); | 
|  | printk("%s: orphaned page\n", __FUNCTION__); | 
|  | return PAGE_CLEAN; | 
|  | } | 
|  | } | 
|  | return PAGE_KEEP; | 
|  | } | 
|  | if (mapping->a_ops->writepage == NULL) | 
|  | return PAGE_ACTIVATE; | 
|  | if (!may_write_to_queue(mapping->backing_dev_info)) | 
|  | return PAGE_KEEP; | 
|  |  | 
|  | if (clear_page_dirty_for_io(page)) { | 
|  | int res; | 
|  | struct writeback_control wbc = { | 
|  | .sync_mode = WB_SYNC_NONE, | 
|  | .nr_to_write = SWAP_CLUSTER_MAX, | 
|  | .nonblocking = 1, | 
|  | .for_reclaim = 1, | 
|  | }; | 
|  |  | 
|  | SetPageReclaim(page); | 
|  | res = mapping->a_ops->writepage(page, &wbc); | 
|  | if (res < 0) | 
|  | handle_write_error(mapping, page, res); | 
|  | if (res == WRITEPAGE_ACTIVATE) { | 
|  | ClearPageReclaim(page); | 
|  | return PAGE_ACTIVATE; | 
|  | } | 
|  | if (!PageWriteback(page)) { | 
|  | /* synchronous write or broken a_ops? */ | 
|  | ClearPageReclaim(page); | 
|  | } | 
|  |  | 
|  | return PAGE_SUCCESS; | 
|  | } | 
|  |  | 
|  | return PAGE_CLEAN; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * shrink_list adds the number of reclaimed pages to sc->nr_reclaimed | 
|  | */ | 
|  | static int shrink_list(struct list_head *page_list, struct scan_control *sc) | 
|  | { | 
|  | LIST_HEAD(ret_pages); | 
|  | struct pagevec freed_pvec; | 
|  | int pgactivate = 0; | 
|  | int reclaimed = 0; | 
|  |  | 
|  | cond_resched(); | 
|  |  | 
|  | pagevec_init(&freed_pvec, 1); | 
|  | while (!list_empty(page_list)) { | 
|  | struct address_space *mapping; | 
|  | struct page *page; | 
|  | int may_enter_fs; | 
|  | int referenced; | 
|  |  | 
|  | cond_resched(); | 
|  |  | 
|  | page = lru_to_page(page_list); | 
|  | list_del(&page->lru); | 
|  |  | 
|  | if (TestSetPageLocked(page)) | 
|  | goto keep; | 
|  |  | 
|  | BUG_ON(PageActive(page)); | 
|  |  | 
|  | sc->nr_scanned++; | 
|  | /* Double the slab pressure for mapped and swapcache pages */ | 
|  | if (page_mapped(page) || PageSwapCache(page)) | 
|  | sc->nr_scanned++; | 
|  |  | 
|  | if (PageWriteback(page)) | 
|  | goto keep_locked; | 
|  |  | 
|  | referenced = page_referenced(page, 1, sc->priority <= 0); | 
|  | /* In active use or really unfreeable?  Activate it. */ | 
|  | if (referenced && page_mapping_inuse(page)) | 
|  | goto activate_locked; | 
|  |  | 
|  | #ifdef CONFIG_SWAP | 
|  | /* | 
|  | * Anonymous process memory has backing store? | 
|  | * Try to allocate it some swap space here. | 
|  | */ | 
|  | if (PageAnon(page) && !PageSwapCache(page)) { | 
|  | if (!sc->may_swap) | 
|  | goto keep_locked; | 
|  | if (!add_to_swap(page)) | 
|  | goto activate_locked; | 
|  | } | 
|  | #endif /* CONFIG_SWAP */ | 
|  |  | 
|  | mapping = page_mapping(page); | 
|  | may_enter_fs = (sc->gfp_mask & __GFP_FS) || | 
|  | (PageSwapCache(page) && (sc->gfp_mask & __GFP_IO)); | 
|  |  | 
|  | /* | 
|  | * The page is mapped into the page tables of one or more | 
|  | * processes. Try to unmap it here. | 
|  | */ | 
|  | if (page_mapped(page) && mapping) { | 
|  | switch (try_to_unmap(page)) { | 
|  | case SWAP_FAIL: | 
|  | goto activate_locked; | 
|  | case SWAP_AGAIN: | 
|  | goto keep_locked; | 
|  | case SWAP_SUCCESS: | 
|  | ; /* try to free the page below */ | 
|  | } | 
|  | } | 
|  |  | 
|  | if (PageDirty(page)) { | 
|  | if (referenced) | 
|  | goto keep_locked; | 
|  | if (!may_enter_fs) | 
|  | goto keep_locked; | 
|  | if (laptop_mode && !sc->may_writepage) | 
|  | goto keep_locked; | 
|  |  | 
|  | /* Page is dirty, try to write it out here */ | 
|  | switch(pageout(page, mapping)) { | 
|  | case PAGE_KEEP: | 
|  | goto keep_locked; | 
|  | case PAGE_ACTIVATE: | 
|  | goto activate_locked; | 
|  | case PAGE_SUCCESS: | 
|  | if (PageWriteback(page) || PageDirty(page)) | 
|  | goto keep; | 
|  | /* | 
|  | * A synchronous write - probably a ramdisk.  Go | 
|  | * ahead and try to reclaim the page. | 
|  | */ | 
|  | if (TestSetPageLocked(page)) | 
|  | goto keep; | 
|  | if (PageDirty(page) || PageWriteback(page)) | 
|  | goto keep_locked; | 
|  | mapping = page_mapping(page); | 
|  | case PAGE_CLEAN: | 
|  | ; /* try to free the page below */ | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the page has buffers, try to free the buffer mappings | 
|  | * associated with this page. If we succeed we try to free | 
|  | * the page as well. | 
|  | * | 
|  | * We do this even if the page is PageDirty(). | 
|  | * try_to_release_page() does not perform I/O, but it is | 
|  | * possible for a page to have PageDirty set, but it is actually | 
|  | * clean (all its buffers are clean).  This happens if the | 
|  | * buffers were written out directly, with submit_bh(). ext3 | 
|  | * will do this, as well as the blockdev mapping. | 
|  | * try_to_release_page() will discover that cleanness and will | 
|  | * drop the buffers and mark the page clean - it can be freed. | 
|  | * | 
|  | * Rarely, pages can have buffers and no ->mapping.  These are | 
|  | * the pages which were not successfully invalidated in | 
|  | * truncate_complete_page().  We try to drop those buffers here | 
|  | * and if that worked, and the page is no longer mapped into | 
|  | * process address space (page_count == 1) it can be freed. | 
|  | * Otherwise, leave the page on the LRU so it is swappable. | 
|  | */ | 
|  | if (PagePrivate(page)) { | 
|  | if (!try_to_release_page(page, sc->gfp_mask)) | 
|  | goto activate_locked; | 
|  | if (!mapping && page_count(page) == 1) | 
|  | goto free_it; | 
|  | } | 
|  |  | 
|  | if (!mapping) | 
|  | goto keep_locked;	/* truncate got there first */ | 
|  |  | 
|  | write_lock_irq(&mapping->tree_lock); | 
|  |  | 
|  | /* | 
|  | * The non-racy check for busy page.  It is critical to check | 
|  | * PageDirty _after_ making sure that the page is freeable and | 
|  | * not in use by anybody. 	(pagecache + us == 2) | 
|  | */ | 
|  | if (unlikely(page_count(page) != 2)) | 
|  | goto cannot_free; | 
|  | smp_rmb(); | 
|  | if (unlikely(PageDirty(page))) | 
|  | goto cannot_free; | 
|  |  | 
|  | #ifdef CONFIG_SWAP | 
|  | if (PageSwapCache(page)) { | 
|  | swp_entry_t swap = { .val = page_private(page) }; | 
|  | __delete_from_swap_cache(page); | 
|  | write_unlock_irq(&mapping->tree_lock); | 
|  | swap_free(swap); | 
|  | __put_page(page);	/* The pagecache ref */ | 
|  | goto free_it; | 
|  | } | 
|  | #endif /* CONFIG_SWAP */ | 
|  |  | 
|  | __remove_from_page_cache(page); | 
|  | write_unlock_irq(&mapping->tree_lock); | 
|  | __put_page(page); | 
|  |  | 
|  | free_it: | 
|  | unlock_page(page); | 
|  | reclaimed++; | 
|  | if (!pagevec_add(&freed_pvec, page)) | 
|  | __pagevec_release_nonlru(&freed_pvec); | 
|  | continue; | 
|  |  | 
|  | cannot_free: | 
|  | write_unlock_irq(&mapping->tree_lock); | 
|  | goto keep_locked; | 
|  |  | 
|  | activate_locked: | 
|  | SetPageActive(page); | 
|  | pgactivate++; | 
|  | keep_locked: | 
|  | unlock_page(page); | 
|  | keep: | 
|  | list_add(&page->lru, &ret_pages); | 
|  | BUG_ON(PageLRU(page)); | 
|  | } | 
|  | list_splice(&ret_pages, page_list); | 
|  | if (pagevec_count(&freed_pvec)) | 
|  | __pagevec_release_nonlru(&freed_pvec); | 
|  | mod_page_state(pgactivate, pgactivate); | 
|  | sc->nr_reclaimed += reclaimed; | 
|  | return reclaimed; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * zone->lru_lock is heavily contended.  Some of the functions that | 
|  | * shrink the lists perform better by taking out a batch of pages | 
|  | * and working on them outside the LRU lock. | 
|  | * | 
|  | * For pagecache intensive workloads, this function is the hottest | 
|  | * spot in the kernel (apart from copy_*_user functions). | 
|  | * | 
|  | * Appropriate locks must be held before calling this function. | 
|  | * | 
|  | * @nr_to_scan:	The number of pages to look through on the list. | 
|  | * @src:	The LRU list to pull pages off. | 
|  | * @dst:	The temp list to put pages on to. | 
|  | * @scanned:	The number of pages that were scanned. | 
|  | * | 
|  | * returns how many pages were moved onto *@dst. | 
|  | */ | 
|  | static int isolate_lru_pages(int nr_to_scan, struct list_head *src, | 
|  | struct list_head *dst, int *scanned) | 
|  | { | 
|  | int nr_taken = 0; | 
|  | struct page *page; | 
|  | int scan = 0; | 
|  |  | 
|  | while (scan++ < nr_to_scan && !list_empty(src)) { | 
|  | page = lru_to_page(src); | 
|  | prefetchw_prev_lru_page(page, src, flags); | 
|  |  | 
|  | if (!TestClearPageLRU(page)) | 
|  | BUG(); | 
|  | list_del(&page->lru); | 
|  | if (get_page_testone(page)) { | 
|  | /* | 
|  | * It is being freed elsewhere | 
|  | */ | 
|  | __put_page(page); | 
|  | SetPageLRU(page); | 
|  | list_add(&page->lru, src); | 
|  | continue; | 
|  | } else { | 
|  | list_add(&page->lru, dst); | 
|  | nr_taken++; | 
|  | } | 
|  | } | 
|  |  | 
|  | *scanned = scan; | 
|  | return nr_taken; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * shrink_cache() adds the number of pages reclaimed to sc->nr_reclaimed | 
|  | */ | 
|  | static void shrink_cache(struct zone *zone, struct scan_control *sc) | 
|  | { | 
|  | LIST_HEAD(page_list); | 
|  | struct pagevec pvec; | 
|  | int max_scan = sc->nr_to_scan; | 
|  |  | 
|  | pagevec_init(&pvec, 1); | 
|  |  | 
|  | lru_add_drain(); | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | while (max_scan > 0) { | 
|  | struct page *page; | 
|  | int nr_taken; | 
|  | int nr_scan; | 
|  | int nr_freed; | 
|  |  | 
|  | nr_taken = isolate_lru_pages(sc->swap_cluster_max, | 
|  | &zone->inactive_list, | 
|  | &page_list, &nr_scan); | 
|  | zone->nr_inactive -= nr_taken; | 
|  | zone->pages_scanned += nr_scan; | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  |  | 
|  | if (nr_taken == 0) | 
|  | goto done; | 
|  |  | 
|  | max_scan -= nr_scan; | 
|  | if (current_is_kswapd()) | 
|  | mod_page_state_zone(zone, pgscan_kswapd, nr_scan); | 
|  | else | 
|  | mod_page_state_zone(zone, pgscan_direct, nr_scan); | 
|  | nr_freed = shrink_list(&page_list, sc); | 
|  | if (current_is_kswapd()) | 
|  | mod_page_state(kswapd_steal, nr_freed); | 
|  | mod_page_state_zone(zone, pgsteal, nr_freed); | 
|  | sc->nr_to_reclaim -= nr_freed; | 
|  |  | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | /* | 
|  | * Put back any unfreeable pages. | 
|  | */ | 
|  | while (!list_empty(&page_list)) { | 
|  | page = lru_to_page(&page_list); | 
|  | if (TestSetPageLRU(page)) | 
|  | BUG(); | 
|  | list_del(&page->lru); | 
|  | if (PageActive(page)) | 
|  | add_page_to_active_list(zone, page); | 
|  | else | 
|  | add_page_to_inactive_list(zone, page); | 
|  | if (!pagevec_add(&pvec, page)) { | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  | __pagevec_release(&pvec); | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | } | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  | done: | 
|  | pagevec_release(&pvec); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This moves pages from the active list to the inactive list. | 
|  | * | 
|  | * We move them the other way if the page is referenced by one or more | 
|  | * processes, from rmap. | 
|  | * | 
|  | * If the pages are mostly unmapped, the processing is fast and it is | 
|  | * appropriate to hold zone->lru_lock across the whole operation.  But if | 
|  | * the pages are mapped, the processing is slow (page_referenced()) so we | 
|  | * should drop zone->lru_lock around each page.  It's impossible to balance | 
|  | * this, so instead we remove the pages from the LRU while processing them. | 
|  | * It is safe to rely on PG_active against the non-LRU pages in here because | 
|  | * nobody will play with that bit on a non-LRU page. | 
|  | * | 
|  | * The downside is that we have to touch page->_count against each page. | 
|  | * But we had to alter page->flags anyway. | 
|  | */ | 
|  | static void | 
|  | refill_inactive_zone(struct zone *zone, struct scan_control *sc) | 
|  | { | 
|  | int pgmoved; | 
|  | int pgdeactivate = 0; | 
|  | int pgscanned; | 
|  | int nr_pages = sc->nr_to_scan; | 
|  | LIST_HEAD(l_hold);	/* The pages which were snipped off */ | 
|  | LIST_HEAD(l_inactive);	/* Pages to go onto the inactive_list */ | 
|  | LIST_HEAD(l_active);	/* Pages to go onto the active_list */ | 
|  | struct page *page; | 
|  | struct pagevec pvec; | 
|  | int reclaim_mapped = 0; | 
|  | long mapped_ratio; | 
|  | long distress; | 
|  | long swap_tendency; | 
|  |  | 
|  | lru_add_drain(); | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | pgmoved = isolate_lru_pages(nr_pages, &zone->active_list, | 
|  | &l_hold, &pgscanned); | 
|  | zone->pages_scanned += pgscanned; | 
|  | zone->nr_active -= pgmoved; | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  |  | 
|  | /* | 
|  | * `distress' is a measure of how much trouble we're having reclaiming | 
|  | * pages.  0 -> no problems.  100 -> great trouble. | 
|  | */ | 
|  | distress = 100 >> zone->prev_priority; | 
|  |  | 
|  | /* | 
|  | * The point of this algorithm is to decide when to start reclaiming | 
|  | * mapped memory instead of just pagecache.  Work out how much memory | 
|  | * is mapped. | 
|  | */ | 
|  | mapped_ratio = (sc->nr_mapped * 100) / total_memory; | 
|  |  | 
|  | /* | 
|  | * Now decide how much we really want to unmap some pages.  The mapped | 
|  | * ratio is downgraded - just because there's a lot of mapped memory | 
|  | * doesn't necessarily mean that page reclaim isn't succeeding. | 
|  | * | 
|  | * The distress ratio is important - we don't want to start going oom. | 
|  | * | 
|  | * A 100% value of vm_swappiness overrides this algorithm altogether. | 
|  | */ | 
|  | swap_tendency = mapped_ratio / 2 + distress + vm_swappiness; | 
|  |  | 
|  | /* | 
|  | * Now use this metric to decide whether to start moving mapped memory | 
|  | * onto the inactive list. | 
|  | */ | 
|  | if (swap_tendency >= 100) | 
|  | reclaim_mapped = 1; | 
|  |  | 
|  | while (!list_empty(&l_hold)) { | 
|  | cond_resched(); | 
|  | page = lru_to_page(&l_hold); | 
|  | list_del(&page->lru); | 
|  | if (page_mapped(page)) { | 
|  | if (!reclaim_mapped || | 
|  | (total_swap_pages == 0 && PageAnon(page)) || | 
|  | page_referenced(page, 0, sc->priority <= 0)) { | 
|  | list_add(&page->lru, &l_active); | 
|  | continue; | 
|  | } | 
|  | } | 
|  | list_add(&page->lru, &l_inactive); | 
|  | } | 
|  |  | 
|  | pagevec_init(&pvec, 1); | 
|  | pgmoved = 0; | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | while (!list_empty(&l_inactive)) { | 
|  | page = lru_to_page(&l_inactive); | 
|  | prefetchw_prev_lru_page(page, &l_inactive, flags); | 
|  | if (TestSetPageLRU(page)) | 
|  | BUG(); | 
|  | if (!TestClearPageActive(page)) | 
|  | BUG(); | 
|  | list_move(&page->lru, &zone->inactive_list); | 
|  | pgmoved++; | 
|  | if (!pagevec_add(&pvec, page)) { | 
|  | zone->nr_inactive += pgmoved; | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  | pgdeactivate += pgmoved; | 
|  | pgmoved = 0; | 
|  | if (buffer_heads_over_limit) | 
|  | pagevec_strip(&pvec); | 
|  | __pagevec_release(&pvec); | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | } | 
|  | } | 
|  | zone->nr_inactive += pgmoved; | 
|  | pgdeactivate += pgmoved; | 
|  | if (buffer_heads_over_limit) { | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  | pagevec_strip(&pvec); | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | } | 
|  |  | 
|  | pgmoved = 0; | 
|  | while (!list_empty(&l_active)) { | 
|  | page = lru_to_page(&l_active); | 
|  | prefetchw_prev_lru_page(page, &l_active, flags); | 
|  | if (TestSetPageLRU(page)) | 
|  | BUG(); | 
|  | BUG_ON(!PageActive(page)); | 
|  | list_move(&page->lru, &zone->active_list); | 
|  | pgmoved++; | 
|  | if (!pagevec_add(&pvec, page)) { | 
|  | zone->nr_active += pgmoved; | 
|  | pgmoved = 0; | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  | __pagevec_release(&pvec); | 
|  | spin_lock_irq(&zone->lru_lock); | 
|  | } | 
|  | } | 
|  | zone->nr_active += pgmoved; | 
|  | spin_unlock_irq(&zone->lru_lock); | 
|  | pagevec_release(&pvec); | 
|  |  | 
|  | mod_page_state_zone(zone, pgrefill, pgscanned); | 
|  | mod_page_state(pgdeactivate, pgdeactivate); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is a basic per-zone page freer.  Used by both kswapd and direct reclaim. | 
|  | */ | 
|  | static void | 
|  | shrink_zone(struct zone *zone, struct scan_control *sc) | 
|  | { | 
|  | unsigned long nr_active; | 
|  | unsigned long nr_inactive; | 
|  |  | 
|  | atomic_inc(&zone->reclaim_in_progress); | 
|  |  | 
|  | /* | 
|  | * Add one to `nr_to_scan' just to make sure that the kernel will | 
|  | * slowly sift through the active list. | 
|  | */ | 
|  | zone->nr_scan_active += (zone->nr_active >> sc->priority) + 1; | 
|  | nr_active = zone->nr_scan_active; | 
|  | if (nr_active >= sc->swap_cluster_max) | 
|  | zone->nr_scan_active = 0; | 
|  | else | 
|  | nr_active = 0; | 
|  |  | 
|  | zone->nr_scan_inactive += (zone->nr_inactive >> sc->priority) + 1; | 
|  | nr_inactive = zone->nr_scan_inactive; | 
|  | if (nr_inactive >= sc->swap_cluster_max) | 
|  | zone->nr_scan_inactive = 0; | 
|  | else | 
|  | nr_inactive = 0; | 
|  |  | 
|  | sc->nr_to_reclaim = sc->swap_cluster_max; | 
|  |  | 
|  | while (nr_active || nr_inactive) { | 
|  | if (nr_active) { | 
|  | sc->nr_to_scan = min(nr_active, | 
|  | (unsigned long)sc->swap_cluster_max); | 
|  | nr_active -= sc->nr_to_scan; | 
|  | refill_inactive_zone(zone, sc); | 
|  | } | 
|  |  | 
|  | if (nr_inactive) { | 
|  | sc->nr_to_scan = min(nr_inactive, | 
|  | (unsigned long)sc->swap_cluster_max); | 
|  | nr_inactive -= sc->nr_to_scan; | 
|  | shrink_cache(zone, sc); | 
|  | if (sc->nr_to_reclaim <= 0) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | throttle_vm_writeout(); | 
|  |  | 
|  | atomic_dec(&zone->reclaim_in_progress); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the direct reclaim path, for page-allocating processes.  We only | 
|  | * try to reclaim pages from zones which will satisfy the caller's allocation | 
|  | * request. | 
|  | * | 
|  | * We reclaim from a zone even if that zone is over pages_high.  Because: | 
|  | * a) The caller may be trying to free *extra* pages to satisfy a higher-order | 
|  | *    allocation or | 
|  | * b) The zones may be over pages_high but they must go *over* pages_high to | 
|  | *    satisfy the `incremental min' zone defense algorithm. | 
|  | * | 
|  | * Returns the number of reclaimed pages. | 
|  | * | 
|  | * If a zone is deemed to be full of pinned pages then just give it a light | 
|  | * scan then give up on it. | 
|  | */ | 
|  | static void | 
|  | shrink_caches(struct zone **zones, struct scan_control *sc) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; zones[i] != NULL; i++) { | 
|  | struct zone *zone = zones[i]; | 
|  |  | 
|  | if (zone->present_pages == 0) | 
|  | continue; | 
|  |  | 
|  | if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
|  | continue; | 
|  |  | 
|  | zone->temp_priority = sc->priority; | 
|  | if (zone->prev_priority > sc->priority) | 
|  | zone->prev_priority = sc->priority; | 
|  |  | 
|  | if (zone->all_unreclaimable && sc->priority != DEF_PRIORITY) | 
|  | continue;	/* Let kswapd poll it */ | 
|  |  | 
|  | shrink_zone(zone, sc); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is the main entry point to direct page reclaim. | 
|  | * | 
|  | * If a full scan of the inactive list fails to free enough memory then we | 
|  | * are "out of memory" and something needs to be killed. | 
|  | * | 
|  | * If the caller is !__GFP_FS then the probability of a failure is reasonably | 
|  | * high - the zone may be full of dirty or under-writeback pages, which this | 
|  | * caller can't do much about.  We kick pdflush and take explicit naps in the | 
|  | * hope that some of these pages can be written.  But if the allocating task | 
|  | * holds filesystem locks which prevent writeout this might not work, and the | 
|  | * allocation attempt will fail. | 
|  | */ | 
|  | int try_to_free_pages(struct zone **zones, gfp_t gfp_mask) | 
|  | { | 
|  | int priority; | 
|  | int ret = 0; | 
|  | int total_scanned = 0, total_reclaimed = 0; | 
|  | struct reclaim_state *reclaim_state = current->reclaim_state; | 
|  | struct scan_control sc; | 
|  | unsigned long lru_pages = 0; | 
|  | int i; | 
|  |  | 
|  | sc.gfp_mask = gfp_mask; | 
|  | sc.may_writepage = 0; | 
|  | sc.may_swap = 1; | 
|  |  | 
|  | inc_page_state(allocstall); | 
|  |  | 
|  | for (i = 0; zones[i] != NULL; i++) { | 
|  | struct zone *zone = zones[i]; | 
|  |  | 
|  | if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
|  | continue; | 
|  |  | 
|  | zone->temp_priority = DEF_PRIORITY; | 
|  | lru_pages += zone->nr_active + zone->nr_inactive; | 
|  | } | 
|  |  | 
|  | for (priority = DEF_PRIORITY; priority >= 0; priority--) { | 
|  | sc.nr_mapped = read_page_state(nr_mapped); | 
|  | sc.nr_scanned = 0; | 
|  | sc.nr_reclaimed = 0; | 
|  | sc.priority = priority; | 
|  | sc.swap_cluster_max = SWAP_CLUSTER_MAX; | 
|  | shrink_caches(zones, &sc); | 
|  | shrink_slab(sc.nr_scanned, gfp_mask, lru_pages); | 
|  | if (reclaim_state) { | 
|  | sc.nr_reclaimed += reclaim_state->reclaimed_slab; | 
|  | reclaim_state->reclaimed_slab = 0; | 
|  | } | 
|  | total_scanned += sc.nr_scanned; | 
|  | total_reclaimed += sc.nr_reclaimed; | 
|  | if (total_reclaimed >= sc.swap_cluster_max) { | 
|  | ret = 1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Try to write back as many pages as we just scanned.  This | 
|  | * tends to cause slow streaming writers to write data to the | 
|  | * disk smoothly, at the dirtying rate, which is nice.   But | 
|  | * that's undesirable in laptop mode, where we *want* lumpy | 
|  | * writeout.  So in laptop mode, write out the whole world. | 
|  | */ | 
|  | if (total_scanned > sc.swap_cluster_max + sc.swap_cluster_max/2) { | 
|  | wakeup_pdflush(laptop_mode ? 0 : total_scanned); | 
|  | sc.may_writepage = 1; | 
|  | } | 
|  |  | 
|  | /* Take a nap, wait for some writeback to complete */ | 
|  | if (sc.nr_scanned && priority < DEF_PRIORITY - 2) | 
|  | blk_congestion_wait(WRITE, HZ/10); | 
|  | } | 
|  | out: | 
|  | for (i = 0; zones[i] != 0; i++) { | 
|  | struct zone *zone = zones[i]; | 
|  |  | 
|  | if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
|  | continue; | 
|  |  | 
|  | zone->prev_priority = zone->temp_priority; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For kswapd, balance_pgdat() will work across all this node's zones until | 
|  | * they are all at pages_high. | 
|  | * | 
|  | * If `nr_pages' is non-zero then it is the number of pages which are to be | 
|  | * reclaimed, regardless of the zone occupancies.  This is a software suspend | 
|  | * special. | 
|  | * | 
|  | * Returns the number of pages which were actually freed. | 
|  | * | 
|  | * There is special handling here for zones which are full of pinned pages. | 
|  | * This can happen if the pages are all mlocked, or if they are all used by | 
|  | * device drivers (say, ZONE_DMA).  Or if they are all in use by hugetlb. | 
|  | * What we do is to detect the case where all pages in the zone have been | 
|  | * scanned twice and there has been zero successful reclaim.  Mark the zone as | 
|  | * dead and from now on, only perform a short scan.  Basically we're polling | 
|  | * the zone for when the problem goes away. | 
|  | * | 
|  | * kswapd scans the zones in the highmem->normal->dma direction.  It skips | 
|  | * zones which have free_pages > pages_high, but once a zone is found to have | 
|  | * free_pages <= pages_high, we scan that zone and the lower zones regardless | 
|  | * of the number of free pages in the lower zones.  This interoperates with | 
|  | * the page allocator fallback scheme to ensure that aging of pages is balanced | 
|  | * across the zones. | 
|  | */ | 
|  | static int balance_pgdat(pg_data_t *pgdat, int nr_pages, int order) | 
|  | { | 
|  | int to_free = nr_pages; | 
|  | int all_zones_ok; | 
|  | int priority; | 
|  | int i; | 
|  | int total_scanned, total_reclaimed; | 
|  | struct reclaim_state *reclaim_state = current->reclaim_state; | 
|  | struct scan_control sc; | 
|  |  | 
|  | loop_again: | 
|  | total_scanned = 0; | 
|  | total_reclaimed = 0; | 
|  | sc.gfp_mask = GFP_KERNEL; | 
|  | sc.may_writepage = 0; | 
|  | sc.may_swap = 1; | 
|  | sc.nr_mapped = read_page_state(nr_mapped); | 
|  |  | 
|  | inc_page_state(pageoutrun); | 
|  |  | 
|  | for (i = 0; i < pgdat->nr_zones; i++) { | 
|  | struct zone *zone = pgdat->node_zones + i; | 
|  |  | 
|  | zone->temp_priority = DEF_PRIORITY; | 
|  | } | 
|  |  | 
|  | for (priority = DEF_PRIORITY; priority >= 0; priority--) { | 
|  | int end_zone = 0;	/* Inclusive.  0 = ZONE_DMA */ | 
|  | unsigned long lru_pages = 0; | 
|  |  | 
|  | all_zones_ok = 1; | 
|  |  | 
|  | if (nr_pages == 0) { | 
|  | /* | 
|  | * Scan in the highmem->dma direction for the highest | 
|  | * zone which needs scanning | 
|  | */ | 
|  | for (i = pgdat->nr_zones - 1; i >= 0; i--) { | 
|  | struct zone *zone = pgdat->node_zones + i; | 
|  |  | 
|  | if (zone->present_pages == 0) | 
|  | continue; | 
|  |  | 
|  | if (zone->all_unreclaimable && | 
|  | priority != DEF_PRIORITY) | 
|  | continue; | 
|  |  | 
|  | if (!zone_watermark_ok(zone, order, | 
|  | zone->pages_high, 0, 0, 0)) { | 
|  | end_zone = i; | 
|  | goto scan; | 
|  | } | 
|  | } | 
|  | goto out; | 
|  | } else { | 
|  | end_zone = pgdat->nr_zones - 1; | 
|  | } | 
|  | scan: | 
|  | for (i = 0; i <= end_zone; i++) { | 
|  | struct zone *zone = pgdat->node_zones + i; | 
|  |  | 
|  | lru_pages += zone->nr_active + zone->nr_inactive; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now scan the zone in the dma->highmem direction, stopping | 
|  | * at the last zone which needs scanning. | 
|  | * | 
|  | * We do this because the page allocator works in the opposite | 
|  | * direction.  This prevents the page allocator from allocating | 
|  | * pages behind kswapd's direction of progress, which would | 
|  | * cause too much scanning of the lower zones. | 
|  | */ | 
|  | for (i = 0; i <= end_zone; i++) { | 
|  | struct zone *zone = pgdat->node_zones + i; | 
|  | int nr_slab; | 
|  |  | 
|  | if (zone->present_pages == 0) | 
|  | continue; | 
|  |  | 
|  | if (zone->all_unreclaimable && priority != DEF_PRIORITY) | 
|  | continue; | 
|  |  | 
|  | if (nr_pages == 0) {	/* Not software suspend */ | 
|  | if (!zone_watermark_ok(zone, order, | 
|  | zone->pages_high, end_zone, 0, 0)) | 
|  | all_zones_ok = 0; | 
|  | } | 
|  | zone->temp_priority = priority; | 
|  | if (zone->prev_priority > priority) | 
|  | zone->prev_priority = priority; | 
|  | sc.nr_scanned = 0; | 
|  | sc.nr_reclaimed = 0; | 
|  | sc.priority = priority; | 
|  | sc.swap_cluster_max = nr_pages? nr_pages : SWAP_CLUSTER_MAX; | 
|  | atomic_inc(&zone->reclaim_in_progress); | 
|  | shrink_zone(zone, &sc); | 
|  | atomic_dec(&zone->reclaim_in_progress); | 
|  | reclaim_state->reclaimed_slab = 0; | 
|  | nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL, | 
|  | lru_pages); | 
|  | sc.nr_reclaimed += reclaim_state->reclaimed_slab; | 
|  | total_reclaimed += sc.nr_reclaimed; | 
|  | total_scanned += sc.nr_scanned; | 
|  | if (zone->all_unreclaimable) | 
|  | continue; | 
|  | if (nr_slab == 0 && zone->pages_scanned >= | 
|  | (zone->nr_active + zone->nr_inactive) * 4) | 
|  | zone->all_unreclaimable = 1; | 
|  | /* | 
|  | * If we've done a decent amount of scanning and | 
|  | * the reclaim ratio is low, start doing writepage | 
|  | * even in laptop mode | 
|  | */ | 
|  | if (total_scanned > SWAP_CLUSTER_MAX * 2 && | 
|  | total_scanned > total_reclaimed+total_reclaimed/2) | 
|  | sc.may_writepage = 1; | 
|  | } | 
|  | if (nr_pages && to_free > total_reclaimed) | 
|  | continue;	/* swsusp: need to do more work */ | 
|  | if (all_zones_ok) | 
|  | break;		/* kswapd: all done */ | 
|  | /* | 
|  | * OK, kswapd is getting into trouble.  Take a nap, then take | 
|  | * another pass across the zones. | 
|  | */ | 
|  | if (total_scanned && priority < DEF_PRIORITY - 2) | 
|  | blk_congestion_wait(WRITE, HZ/10); | 
|  |  | 
|  | /* | 
|  | * We do this so kswapd doesn't build up large priorities for | 
|  | * example when it is freeing in parallel with allocators. It | 
|  | * matches the direct reclaim path behaviour in terms of impact | 
|  | * on zone->*_priority. | 
|  | */ | 
|  | if ((total_reclaimed >= SWAP_CLUSTER_MAX) && (!nr_pages)) | 
|  | break; | 
|  | } | 
|  | out: | 
|  | for (i = 0; i < pgdat->nr_zones; i++) { | 
|  | struct zone *zone = pgdat->node_zones + i; | 
|  |  | 
|  | zone->prev_priority = zone->temp_priority; | 
|  | } | 
|  | if (!all_zones_ok) { | 
|  | cond_resched(); | 
|  | goto loop_again; | 
|  | } | 
|  |  | 
|  | return total_reclaimed; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The background pageout daemon, started as a kernel thread | 
|  | * from the init process. | 
|  | * | 
|  | * This basically trickles out pages so that we have _some_ | 
|  | * free memory available even if there is no other activity | 
|  | * that frees anything up. This is needed for things like routing | 
|  | * etc, where we otherwise might have all activity going on in | 
|  | * asynchronous contexts that cannot page things out. | 
|  | * | 
|  | * If there are applications that are active memory-allocators | 
|  | * (most normal use), this basically shouldn't matter. | 
|  | */ | 
|  | static int kswapd(void *p) | 
|  | { | 
|  | unsigned long order; | 
|  | pg_data_t *pgdat = (pg_data_t*)p; | 
|  | struct task_struct *tsk = current; | 
|  | DEFINE_WAIT(wait); | 
|  | struct reclaim_state reclaim_state = { | 
|  | .reclaimed_slab = 0, | 
|  | }; | 
|  | cpumask_t cpumask; | 
|  |  | 
|  | daemonize("kswapd%d", pgdat->node_id); | 
|  | cpumask = node_to_cpumask(pgdat->node_id); | 
|  | if (!cpus_empty(cpumask)) | 
|  | set_cpus_allowed(tsk, cpumask); | 
|  | current->reclaim_state = &reclaim_state; | 
|  |  | 
|  | /* | 
|  | * Tell the memory management that we're a "memory allocator", | 
|  | * and that if we need more memory we should get access to it | 
|  | * regardless (see "__alloc_pages()"). "kswapd" should | 
|  | * never get caught in the normal page freeing logic. | 
|  | * | 
|  | * (Kswapd normally doesn't need memory anyway, but sometimes | 
|  | * you need a small amount of memory in order to be able to | 
|  | * page out something else, and this flag essentially protects | 
|  | * us from recursively trying to free more memory as we're | 
|  | * trying to free the first piece of memory in the first place). | 
|  | */ | 
|  | tsk->flags |= PF_MEMALLOC|PF_KSWAPD; | 
|  |  | 
|  | order = 0; | 
|  | for ( ; ; ) { | 
|  | unsigned long new_order; | 
|  |  | 
|  | try_to_freeze(); | 
|  |  | 
|  | prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE); | 
|  | new_order = pgdat->kswapd_max_order; | 
|  | pgdat->kswapd_max_order = 0; | 
|  | if (order < new_order) { | 
|  | /* | 
|  | * Don't sleep if someone wants a larger 'order' | 
|  | * allocation | 
|  | */ | 
|  | order = new_order; | 
|  | } else { | 
|  | schedule(); | 
|  | order = pgdat->kswapd_max_order; | 
|  | } | 
|  | finish_wait(&pgdat->kswapd_wait, &wait); | 
|  |  | 
|  | balance_pgdat(pgdat, 0, order); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A zone is low on free memory, so wake its kswapd task to service it. | 
|  | */ | 
|  | void wakeup_kswapd(struct zone *zone, int order) | 
|  | { | 
|  | pg_data_t *pgdat; | 
|  |  | 
|  | if (zone->present_pages == 0) | 
|  | return; | 
|  |  | 
|  | pgdat = zone->zone_pgdat; | 
|  | if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0, 0)) | 
|  | return; | 
|  | if (pgdat->kswapd_max_order < order) | 
|  | pgdat->kswapd_max_order = order; | 
|  | if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
|  | return; | 
|  | if (!waitqueue_active(&pgdat->kswapd_wait)) | 
|  | return; | 
|  | wake_up_interruptible(&pgdat->kswapd_wait); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | /* | 
|  | * Try to free `nr_pages' of memory, system-wide.  Returns the number of freed | 
|  | * pages. | 
|  | */ | 
|  | int shrink_all_memory(int nr_pages) | 
|  | { | 
|  | pg_data_t *pgdat; | 
|  | int nr_to_free = nr_pages; | 
|  | int ret = 0; | 
|  | struct reclaim_state reclaim_state = { | 
|  | .reclaimed_slab = 0, | 
|  | }; | 
|  |  | 
|  | current->reclaim_state = &reclaim_state; | 
|  | for_each_pgdat(pgdat) { | 
|  | int freed; | 
|  | freed = balance_pgdat(pgdat, nr_to_free, 0); | 
|  | ret += freed; | 
|  | nr_to_free -= freed; | 
|  | if (nr_to_free <= 0) | 
|  | break; | 
|  | } | 
|  | current->reclaim_state = NULL; | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_HOTPLUG_CPU | 
|  | /* It's optimal to keep kswapds on the same CPUs as their memory, but | 
|  | not required for correctness.  So if the last cpu in a node goes | 
|  | away, we get changed to run anywhere: as the first one comes back, | 
|  | restore their cpu bindings. */ | 
|  | static int __devinit cpu_callback(struct notifier_block *nfb, | 
|  | unsigned long action, | 
|  | void *hcpu) | 
|  | { | 
|  | pg_data_t *pgdat; | 
|  | cpumask_t mask; | 
|  |  | 
|  | if (action == CPU_ONLINE) { | 
|  | for_each_pgdat(pgdat) { | 
|  | mask = node_to_cpumask(pgdat->node_id); | 
|  | if (any_online_cpu(mask) != NR_CPUS) | 
|  | /* One of our CPUs online: restore mask */ | 
|  | set_cpus_allowed(pgdat->kswapd, mask); | 
|  | } | 
|  | } | 
|  | return NOTIFY_OK; | 
|  | } | 
|  | #endif /* CONFIG_HOTPLUG_CPU */ | 
|  |  | 
|  | static int __init kswapd_init(void) | 
|  | { | 
|  | pg_data_t *pgdat; | 
|  | swap_setup(); | 
|  | for_each_pgdat(pgdat) | 
|  | pgdat->kswapd | 
|  | = find_task_by_pid(kernel_thread(kswapd, pgdat, CLONE_KERNEL)); | 
|  | total_memory = nr_free_pagecache_pages(); | 
|  | hotcpu_notifier(cpu_callback, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | module_init(kswapd_init) | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Try to free up some pages from this zone through reclaim. | 
|  | */ | 
|  | int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) | 
|  | { | 
|  | struct scan_control sc; | 
|  | int nr_pages = 1 << order; | 
|  | int total_reclaimed = 0; | 
|  |  | 
|  | /* The reclaim may sleep, so don't do it if sleep isn't allowed */ | 
|  | if (!(gfp_mask & __GFP_WAIT)) | 
|  | return 0; | 
|  | if (zone->all_unreclaimable) | 
|  | return 0; | 
|  |  | 
|  | sc.gfp_mask = gfp_mask; | 
|  | sc.may_writepage = 0; | 
|  | sc.may_swap = 0; | 
|  | sc.nr_mapped = read_page_state(nr_mapped); | 
|  | sc.nr_scanned = 0; | 
|  | sc.nr_reclaimed = 0; | 
|  | /* scan at the highest priority */ | 
|  | sc.priority = 0; | 
|  |  | 
|  | if (nr_pages > SWAP_CLUSTER_MAX) | 
|  | sc.swap_cluster_max = nr_pages; | 
|  | else | 
|  | sc.swap_cluster_max = SWAP_CLUSTER_MAX; | 
|  |  | 
|  | /* Don't reclaim the zone if there are other reclaimers active */ | 
|  | if (atomic_read(&zone->reclaim_in_progress) > 0) | 
|  | goto out; | 
|  |  | 
|  | shrink_zone(zone, &sc); | 
|  | total_reclaimed = sc.nr_reclaimed; | 
|  |  | 
|  | out: | 
|  | return total_reclaimed; | 
|  | } | 
|  |  | 
|  | asmlinkage long sys_set_zone_reclaim(unsigned int node, unsigned int zone, | 
|  | unsigned int state) | 
|  | { | 
|  | struct zone *z; | 
|  | int i; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | if (node >= MAX_NUMNODES || !node_online(node)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* This will break if we ever add more zones */ | 
|  | if (!(zone & (1<<ZONE_DMA|1<<ZONE_NORMAL|1<<ZONE_HIGHMEM))) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < MAX_NR_ZONES; i++) { | 
|  | if (!(zone & 1<<i)) | 
|  | continue; | 
|  |  | 
|  | z = &NODE_DATA(node)->node_zones[i]; | 
|  |  | 
|  | if (state) | 
|  | z->reclaim_pages = 1; | 
|  | else | 
|  | z->reclaim_pages = 0; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } |