|  | // SPDX-License-Identifier: GPL-1.0+ | 
|  | /* | 
|  | * Renesas USB driver | 
|  | * | 
|  | * Copyright (C) 2011 Renesas Solutions Corp. | 
|  | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | 
|  | */ | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include "common.h" | 
|  | #include "pipe.h" | 
|  |  | 
|  | /* | 
|  | *		macros | 
|  | */ | 
|  | #define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2) | 
|  |  | 
|  | #define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f) | 
|  | #define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f) | 
|  | #define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f) | 
|  | #define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0) | 
|  |  | 
|  | /* | 
|  | * for debug | 
|  | */ | 
|  | static char *usbhsp_pipe_name[] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL]	= "DCP", | 
|  | [USB_ENDPOINT_XFER_BULK]	= "BULK", | 
|  | [USB_ENDPOINT_XFER_INT]		= "INT", | 
|  | [USB_ENDPOINT_XFER_ISOC]	= "ISO", | 
|  | }; | 
|  |  | 
|  | char *usbhs_pipe_name(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_pipe_name[usbhs_pipe_type(pipe)]; | 
|  | } | 
|  |  | 
|  | static struct renesas_usbhs_driver_pipe_config | 
|  | *usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num) | 
|  | { | 
|  | struct renesas_usbhs_driver_pipe_config *pipe_configs = | 
|  | usbhs_get_dparam(priv, pipe_configs); | 
|  |  | 
|  | return &pipe_configs[pipe_num]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCPCTR/PIPEnCTR functions | 
|  | */ | 
|  | static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int offset = usbhsp_addr_offset(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | usbhs_bset(priv, DCPCTR, mask, val); | 
|  | else | 
|  | usbhs_bset(priv, PIPEnCTR + offset, mask, val); | 
|  | } | 
|  |  | 
|  | static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int offset = usbhsp_addr_offset(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return usbhs_read(priv, DCPCTR); | 
|  | else | 
|  | return usbhs_read(priv, PIPEnCTR + offset); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCP/PIPE functions | 
|  | */ | 
|  | static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, | 
|  | u16 dcp_reg, u16 pipe_reg, | 
|  | u16 mask, u16 val) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | usbhs_bset(priv, dcp_reg, mask, val); | 
|  | else | 
|  | usbhs_bset(priv, pipe_reg, mask, val); | 
|  | } | 
|  |  | 
|  | static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, | 
|  | u16 dcp_reg, u16 pipe_reg) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return usbhs_read(priv, dcp_reg); | 
|  | else | 
|  | return usbhs_read(priv, pipe_reg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCPCFG/PIPECFG functions | 
|  | */ | 
|  | static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); | 
|  | } | 
|  |  | 
|  | static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		PIPEnTRN/PIPEnTRE functions | 
|  | */ | 
|  | static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int num = usbhs_pipe_number(pipe); | 
|  | u16 reg; | 
|  |  | 
|  | /* | 
|  | * It is impossible to calculate address, | 
|  | * since PIPEnTRN addresses were mapped randomly. | 
|  | */ | 
|  | #define CASE_PIPExTRN(a)		\ | 
|  | case 0x ## a:			\ | 
|  | reg = PIPE ## a ## TRN;	\ | 
|  | break; | 
|  |  | 
|  | switch (num) { | 
|  | CASE_PIPExTRN(1); | 
|  | CASE_PIPExTRN(2); | 
|  | CASE_PIPExTRN(3); | 
|  | CASE_PIPExTRN(4); | 
|  | CASE_PIPExTRN(5); | 
|  | CASE_PIPExTRN(B); | 
|  | CASE_PIPExTRN(C); | 
|  | CASE_PIPExTRN(D); | 
|  | CASE_PIPExTRN(E); | 
|  | CASE_PIPExTRN(F); | 
|  | CASE_PIPExTRN(9); | 
|  | CASE_PIPExTRN(A); | 
|  | default: | 
|  | dev_err(dev, "unknown pipe (%d)\n", num); | 
|  | return; | 
|  | } | 
|  | __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); | 
|  | } | 
|  |  | 
|  | static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int num = usbhs_pipe_number(pipe); | 
|  | u16 reg; | 
|  |  | 
|  | /* | 
|  | * It is impossible to calculate address, | 
|  | * since PIPEnTRE addresses were mapped randomly. | 
|  | */ | 
|  | #define CASE_PIPExTRE(a)			\ | 
|  | case 0x ## a:				\ | 
|  | reg = PIPE ## a ## TRE;		\ | 
|  | break; | 
|  |  | 
|  | switch (num) { | 
|  | CASE_PIPExTRE(1); | 
|  | CASE_PIPExTRE(2); | 
|  | CASE_PIPExTRE(3); | 
|  | CASE_PIPExTRE(4); | 
|  | CASE_PIPExTRE(5); | 
|  | CASE_PIPExTRE(B); | 
|  | CASE_PIPExTRE(C); | 
|  | CASE_PIPExTRE(D); | 
|  | CASE_PIPExTRE(E); | 
|  | CASE_PIPExTRE(F); | 
|  | CASE_PIPExTRE(9); | 
|  | CASE_PIPExTRE(A); | 
|  | default: | 
|  | dev_err(dev, "unknown pipe (%d)\n", num); | 
|  | return; | 
|  | } | 
|  |  | 
|  | __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		PIPEBUF | 
|  | */ | 
|  | static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return; | 
|  |  | 
|  | __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCPMAXP/PIPEMAXP | 
|  | */ | 
|  | static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) | 
|  | { | 
|  | __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe control functions | 
|  | */ | 
|  | static void usbhsp_pipe_select(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | /* | 
|  | * On pipe, this is necessary before | 
|  | * accesses to below registers. | 
|  | * | 
|  | * PIPESEL	: usbhsp_pipe_select | 
|  | * PIPECFG	: usbhsp_pipe_cfg_xxx | 
|  | * PIPEBUF	: usbhsp_pipe_buf_xxx | 
|  | * PIPEMAXP	: usbhsp_pipe_maxp_xxx | 
|  | * PIPEPERI | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * if pipe is dcp, no pipe is selected. | 
|  | * it is no problem, because dcp have its register | 
|  | */ | 
|  | usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe)); | 
|  | } | 
|  |  | 
|  | static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int timeout = 1024; | 
|  | u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK; | 
|  |  | 
|  | /* | 
|  | * make sure.... | 
|  | * | 
|  | * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is | 
|  | * specified by the CURPIPE bits. | 
|  | * When changing the setting of this bit after changing | 
|  | * the PID bits for the selected pipe from BUF to NAK, | 
|  | * check that CSSTS = 0 and PBUSY = 0. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * CURPIPE bit = 0 | 
|  | * | 
|  | * see also | 
|  | *  "Operation" | 
|  | *  - "Pipe Control" | 
|  | *   - "Pipe Control Registers Switching Procedure" | 
|  | */ | 
|  | usbhs_write(priv, CFIFOSEL, 0); | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | do { | 
|  | if (!(usbhsp_pipectrl_get(pipe) & mask)) | 
|  | return 0; | 
|  |  | 
|  | udelay(10); | 
|  |  | 
|  | } while (timeout--); | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 val; | 
|  |  | 
|  | val = usbhsp_pipectrl_get(pipe); | 
|  | if (val & BSTS) | 
|  | return 0; | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		PID ctrl | 
|  | */ | 
|  | static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 pid = usbhsp_pipectrl_get(pipe); | 
|  |  | 
|  | pid &= PID_MASK; | 
|  |  | 
|  | /* | 
|  | * see | 
|  | * "Pipe n Control Register" - "PID" | 
|  | */ | 
|  | switch (pid) { | 
|  | case PID_STALL11: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); | 
|  | /* fall-through */ | 
|  | case PID_STALL10: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); | 
|  | } | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_disable(struct usbhs_pipe *pipe) | 
|  | { | 
|  | int timeout = 1024; | 
|  | u16 val; | 
|  |  | 
|  | /* see "Pipe n Control Register" - "PID" */ | 
|  | __usbhsp_pid_try_nak_if_stall(pipe); | 
|  |  | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); | 
|  |  | 
|  | do { | 
|  | val  = usbhsp_pipectrl_get(pipe); | 
|  | val &= PBUSY; | 
|  | if (!val) | 
|  | break; | 
|  |  | 
|  | udelay(10); | 
|  | } while (timeout--); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_enable(struct usbhs_pipe *pipe) | 
|  | { | 
|  | /* see "Pipe n Control Register" - "PID" */ | 
|  | __usbhsp_pid_try_nak_if_stall(pipe); | 
|  |  | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_stall(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 pid = usbhsp_pipectrl_get(pipe); | 
|  |  | 
|  | pid &= PID_MASK; | 
|  |  | 
|  | /* | 
|  | * see | 
|  | * "Pipe n Control Register" - "PID" | 
|  | */ | 
|  | switch (pid) { | 
|  | case PID_NAK: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); | 
|  | break; | 
|  | case PID_BUF: | 
|  | usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_stall(struct usbhs_pipe *pipe) | 
|  | { | 
|  | u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK; | 
|  |  | 
|  | return (int)(pid == PID_STALL10 || pid == PID_STALL11); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len) | 
|  | { | 
|  | if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * clear and disable transfer counter for IN/OUT pipe | 
|  | */ | 
|  | usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR); | 
|  |  | 
|  | /* | 
|  | * Only IN direction bulk pipe can use transfer count. | 
|  | * Without using this function, | 
|  | * received data will break if it was large data size. | 
|  | * see PIPEnTRN/PIPEnTRE for detail | 
|  | */ | 
|  | if (usbhs_pipe_is_dir_in(pipe)) { | 
|  | int maxp = usbhs_pipe_get_maxpacket(pipe); | 
|  |  | 
|  | usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp)); | 
|  | usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */ | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *		pipe setup | 
|  | */ | 
|  | static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host, | 
|  | int dir_in, u16 *pipecfg) | 
|  | { | 
|  | u16 type = 0; | 
|  | u16 bfre = 0; | 
|  | u16 dblb = 0; | 
|  | u16 cntmd = 0; | 
|  | u16 dir = 0; | 
|  | u16 epnum = 0; | 
|  | u16 shtnak = 0; | 
|  | static const u16 type_array[] = { | 
|  | [USB_ENDPOINT_XFER_BULK] = TYPE_BULK, | 
|  | [USB_ENDPOINT_XFER_INT]  = TYPE_INT, | 
|  | [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO, | 
|  | }; | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * PIPECFG | 
|  | * | 
|  | * see | 
|  | *  - "Register Descriptions" - "PIPECFG" register | 
|  | *  - "Features"  - "Pipe configuration" | 
|  | *  - "Operation" - "Pipe Control" | 
|  | */ | 
|  |  | 
|  | /* TYPE */ | 
|  | type = type_array[usbhs_pipe_type(pipe)]; | 
|  |  | 
|  | /* BFRE */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || | 
|  | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | 
|  | bfre = 0; /* FIXME */ | 
|  |  | 
|  | /* DBLB: see usbhs_pipe_config_update() */ | 
|  |  | 
|  | /* CNTMD */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) | 
|  | cntmd = 0; /* FIXME */ | 
|  |  | 
|  | /* DIR */ | 
|  | if (dir_in) | 
|  | usbhsp_flags_set(pipe, IS_DIR_HOST); | 
|  |  | 
|  | if (!!is_host ^ !!dir_in) | 
|  | dir |= DIR_OUT; | 
|  |  | 
|  | if (!dir) | 
|  | usbhsp_flags_set(pipe, IS_DIR_IN); | 
|  |  | 
|  | /* SHTNAK */ | 
|  | if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) && | 
|  | !dir) | 
|  | shtnak = SHTNAK; | 
|  |  | 
|  | /* EPNUM */ | 
|  | epnum = 0; /* see usbhs_pipe_config_update() */ | 
|  | *pipecfg = type		| | 
|  | bfre		| | 
|  | dblb		| | 
|  | cntmd	| | 
|  | dir		| | 
|  | shtnak	| | 
|  | epnum; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int pipe_num = usbhs_pipe_number(pipe); | 
|  | u16 buff_size; | 
|  | u16 bufnmb; | 
|  | u16 bufnmb_cnt; | 
|  | struct renesas_usbhs_driver_pipe_config *pipe_config = | 
|  | usbhsp_get_pipe_config(priv, pipe_num); | 
|  |  | 
|  | /* | 
|  | * PIPEBUF | 
|  | * | 
|  | * see | 
|  | *  - "Register Descriptions" - "PIPEBUF" register | 
|  | *  - "Features"  - "Pipe configuration" | 
|  | *  - "Operation" - "FIFO Buffer Memory" | 
|  | *  - "Operation" - "Pipe Control" | 
|  | */ | 
|  | buff_size = pipe_config->bufsize; | 
|  | bufnmb = pipe_config->bufnum; | 
|  |  | 
|  | /* change buff_size to register value */ | 
|  | bufnmb_cnt = (buff_size / 64) - 1; | 
|  |  | 
|  | dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n", | 
|  | pipe_num, buff_size, bufnmb); | 
|  |  | 
|  | return	(0x1f & bufnmb_cnt)	<< 10 | | 
|  | (0xff & bufnmb)		<<  0; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, | 
|  | u16 epnum, u16 maxp) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int pipe_num = usbhs_pipe_number(pipe); | 
|  | struct renesas_usbhs_driver_pipe_config *pipe_config = | 
|  | usbhsp_get_pipe_config(priv, pipe_num); | 
|  | u16 dblb = pipe_config->double_buf ? DBLB : 0; | 
|  |  | 
|  | if (devsel > 0xA) { | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  |  | 
|  | dev_err(dev, "devsel error %d\n", devsel); | 
|  |  | 
|  | devsel = 0; | 
|  | } | 
|  |  | 
|  | usbhsp_pipe_barrier(pipe); | 
|  |  | 
|  | pipe->maxp = maxp; | 
|  |  | 
|  | usbhsp_pipe_select(pipe); | 
|  | usbhsp_pipe_maxp_set(pipe, 0xFFFF, | 
|  | (devsel << 12) | | 
|  | maxp); | 
|  |  | 
|  | if (!usbhs_pipe_is_dcp(pipe)) | 
|  | usbhsp_pipe_cfg_set(pipe,  0x000F | DBLB, epnum | dblb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe control | 
|  | */ | 
|  | int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) | 
|  | { | 
|  | /* | 
|  | * see | 
|  | *	usbhs_pipe_config_update() | 
|  | *	usbhs_dcp_malloc() | 
|  | */ | 
|  | return pipe->maxp; | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_flags_has(pipe, IS_DIR_IN); | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_flags_has(pipe, IS_DIR_HOST); | 
|  | } | 
|  |  | 
|  | int usbhs_pipe_is_running(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return usbhsp_flags_has(pipe, IS_RUNNING); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_running(struct usbhs_pipe *pipe, int running) | 
|  | { | 
|  | if (running) | 
|  | usbhsp_flags_set(pipe, IS_RUNNING); | 
|  | else | 
|  | usbhsp_flags_clr(pipe, IS_RUNNING); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) | 
|  | { | 
|  | u16 mask = (SQCLR | SQSET); | 
|  | u16 val; | 
|  |  | 
|  | /* | 
|  | * sequence | 
|  | *  0  : data0 | 
|  | *  1  : data1 | 
|  | *  -1 : no change | 
|  | */ | 
|  | switch (sequence) { | 
|  | case 0: | 
|  | val = SQCLR; | 
|  | break; | 
|  | case 1: | 
|  | val = SQSET; | 
|  | break; | 
|  | default: | 
|  | return; | 
|  | } | 
|  |  | 
|  | usbhsp_pipectrl_set(pipe, mask, val); | 
|  | } | 
|  |  | 
|  | static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return !!(usbhsp_pipectrl_get(pipe) & SQMON); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_clear(struct usbhs_pipe *pipe) | 
|  | { | 
|  | if (usbhs_pipe_is_dcp(pipe)) { | 
|  | usbhs_fifo_clear_dcp(pipe); | 
|  | } else { | 
|  | usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); | 
|  | usbhsp_pipectrl_set(pipe, ACLRM, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable) | 
|  | { | 
|  | int sequence; | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | return; | 
|  |  | 
|  | usbhsp_pipe_select(pipe); | 
|  | /* check if the driver needs to change the BFRE value */ | 
|  | if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE))) | 
|  | return; | 
|  |  | 
|  | sequence = usbhs_pipe_get_data_sequence(pipe); | 
|  | usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0); | 
|  | usbhs_pipe_clear(pipe); | 
|  | usbhs_pipe_data_sequence(pipe, sequence); | 
|  | } | 
|  |  | 
|  | static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) | 
|  | { | 
|  | struct usbhs_pipe *pos, *pipe; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * find target pipe | 
|  | */ | 
|  | pipe = NULL; | 
|  | usbhs_for_each_pipe_with_dcp(pos, priv, i) { | 
|  | if (!usbhs_pipe_type_is(pos, type)) | 
|  | continue; | 
|  | if (usbhsp_flags_has(pos, IS_USED)) | 
|  | continue; | 
|  |  | 
|  | pipe = pos; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!pipe) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * initialize pipe flags | 
|  | */ | 
|  | usbhsp_flags_init(pipe); | 
|  | usbhsp_flags_set(pipe, IS_USED); | 
|  |  | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | static void usbhsp_put_pipe(struct usbhs_pipe *pipe) | 
|  | { | 
|  | usbhsp_flags_init(pipe); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_init(struct usbhs_priv *priv, | 
|  | int (*dma_map_ctrl)(struct device *dma_dev, | 
|  | struct usbhs_pkt *pkt, int map)) | 
|  | { | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  | struct usbhs_pipe *pipe; | 
|  | int i; | 
|  |  | 
|  | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | 
|  | usbhsp_flags_init(pipe); | 
|  | pipe->fifo = NULL; | 
|  | pipe->mod_private = NULL; | 
|  | INIT_LIST_HEAD(&pipe->list); | 
|  |  | 
|  | /* pipe force init */ | 
|  | usbhs_pipe_clear(pipe); | 
|  | } | 
|  |  | 
|  | info->dma_map_ctrl = dma_map_ctrl; | 
|  | } | 
|  |  | 
|  | struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, | 
|  | int endpoint_type, | 
|  | int dir_in) | 
|  | { | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | struct usbhs_pipe *pipe; | 
|  | int is_host = usbhs_mod_is_host(priv); | 
|  | int ret; | 
|  | u16 pipecfg, pipebuf; | 
|  |  | 
|  | pipe = usbhsp_get_pipe(priv, endpoint_type); | 
|  | if (!pipe) { | 
|  | dev_err(dev, "can't get pipe (%s)\n", | 
|  | usbhsp_pipe_name[endpoint_type]); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | INIT_LIST_HEAD(&pipe->list); | 
|  |  | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | /* make sure pipe is not busy */ | 
|  | ret = usbhsp_pipe_barrier(pipe); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) { | 
|  | dev_err(dev, "can't setup pipe\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | pipebuf  = usbhsp_setup_pipebuff(pipe); | 
|  |  | 
|  | usbhsp_pipe_select(pipe); | 
|  | usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); | 
|  | usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); | 
|  | usbhs_pipe_clear(pipe); | 
|  |  | 
|  | usbhs_pipe_sequence_data0(pipe); | 
|  |  | 
|  | dev_dbg(dev, "enable pipe %d : %s (%s)\n", | 
|  | usbhs_pipe_number(pipe), | 
|  | usbhs_pipe_name(pipe), | 
|  | usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); | 
|  |  | 
|  | /* | 
|  | * epnum / maxp are still not set to this pipe. | 
|  | * call usbhs_pipe_config_update() after this function !! | 
|  | */ | 
|  |  | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_free(struct usbhs_pipe *pipe) | 
|  | { | 
|  | usbhsp_put_pipe(pipe); | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo) | 
|  | { | 
|  | if (pipe->fifo) | 
|  | pipe->fifo->pipe = NULL; | 
|  |  | 
|  | pipe->fifo = fifo; | 
|  |  | 
|  | if (fifo) | 
|  | fifo->pipe = pipe; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | *		dcp control | 
|  | */ | 
|  | struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_pipe *pipe; | 
|  |  | 
|  | pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL); | 
|  | if (!pipe) | 
|  | return NULL; | 
|  |  | 
|  | INIT_LIST_HEAD(&pipe->list); | 
|  |  | 
|  | /* | 
|  | * call usbhs_pipe_config_update() after this function !! | 
|  | */ | 
|  |  | 
|  | return pipe; | 
|  | } | 
|  |  | 
|  | void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | WARN_ON(!usbhs_pipe_is_dcp(pipe)); | 
|  |  | 
|  | usbhs_pipe_enable(pipe); | 
|  |  | 
|  | if (!usbhs_mod_is_host(priv)) /* funconly */ | 
|  | usbhsp_pipectrl_set(pipe, CCPL, CCPL); | 
|  | } | 
|  |  | 
|  | void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out) | 
|  | { | 
|  | usbhsp_pipe_cfg_set(pipe, DIR_OUT, | 
|  | dir_out ? DIR_OUT : 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		pipe module function | 
|  | */ | 
|  | int usbhs_pipe_probe(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  | struct usbhs_pipe *pipe; | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | struct renesas_usbhs_driver_pipe_config *pipe_configs = | 
|  | usbhs_get_dparam(priv, pipe_configs); | 
|  | int pipe_size = usbhs_get_dparam(priv, pipe_size); | 
|  | int i; | 
|  |  | 
|  | /* This driver expects 1st pipe is DCP */ | 
|  | if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) { | 
|  | dev_err(dev, "1st PIPE is not DCP\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL); | 
|  | if (!info->pipe) | 
|  | return -ENOMEM; | 
|  |  | 
|  | info->size = pipe_size; | 
|  |  | 
|  | /* | 
|  | * init pipe | 
|  | */ | 
|  | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | 
|  | pipe->priv = priv; | 
|  |  | 
|  | usbhs_pipe_type(pipe) = | 
|  | pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK; | 
|  |  | 
|  | dev_dbg(dev, "pipe %x\t: %s\n", | 
|  | i, usbhsp_pipe_name[pipe_configs[i].type]); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void usbhs_pipe_remove(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  |  | 
|  | kfree(info->pipe); | 
|  | } |