drivers/usb/mtu3/mtu3_host.c - third_party/linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_dr.c - dual role switch and host glue layer
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
  */

 #include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>

 #include "mtu3.h"
 #include "mtu3_dr.h"

 #define PERI_WK_CTRL1		0x404
 #define UWK_CTL1_IS_C(x)	(((x) & 0xf) << 26)
 #define UWK_CTL1_IS_E		BIT(25)
 #define UWK_CTL1_IDDIG_C(x)	(((x) & 0xf) << 11)  /* cycle debounce */
 #define UWK_CTL1_IDDIG_E	BIT(10) /* enable debounce */
 #define UWK_CTL1_IDDIG_P	BIT(9)  /* polarity */
 #define UWK_CTL1_IS_P		BIT(6)  /* polarity for ip sleep */

 /*
  * ip-sleep wakeup mode:
  * all clocks can be turn off, but power domain should be kept on
  */
 static void ssusb_wakeup_ip_sleep_en(struct ssusb_mtk *ssusb)
 {
 	u32 tmp;
 	struct regmap *pericfg = ssusb->pericfg;

 	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
 	tmp &= ~UWK_CTL1_IS_P;
 	tmp &= ~(UWK_CTL1_IS_C(0xf));
 	tmp |= UWK_CTL1_IS_C(0x8);
 	regmap_write(pericfg, PERI_WK_CTRL1, tmp);
 	regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);

 	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
 	dev_dbg(ssusb->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
 		__func__, tmp);
 }

 static void ssusb_wakeup_ip_sleep_dis(struct ssusb_mtk *ssusb)
 {
 	u32 tmp;

 	regmap_read(ssusb->pericfg, PERI_WK_CTRL1, &tmp);
 	tmp &= ~UWK_CTL1_IS_E;
 	regmap_write(ssusb->pericfg, PERI_WK_CTRL1, tmp);
 }

 int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
 				struct device_node *dn)
 {
 	struct device *dev = ssusb->dev;

 	/*
 	 * Wakeup function is optional, so it is not an error if this property
 	 * does not exist, and in such case, no need to get relative
 	 * properties anymore.
 	 */
 	ssusb->wakeup_en = of_property_read_bool(dn, "mediatek,enable-wakeup");
 	if (!ssusb->wakeup_en)
 		return 0;

 	ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
 						"mediatek,syscon-wakeup");
 	if (IS_ERR(ssusb->pericfg)) {
 		dev_err(dev, "fail to get pericfg regs\n");
 		return PTR_ERR(ssusb->pericfg);
 	}

 	return 0;
 }

 static void host_ports_num_get(struct ssusb_mtk *ssusb)
 {
 	u32 xhci_cap;

 	xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
 	ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
 	ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);

 	dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
 		 ssusb->u2_ports, ssusb->u3_ports);
 }

 /* only configure ports will be used later */
 int ssusb_host_enable(struct ssusb_mtk *ssusb)
 {
 	void __iomem *ibase = ssusb->ippc_base;
 	int num_u3p = ssusb->u3_ports;
 	int num_u2p = ssusb->u2_ports;
 	int u3_ports_disabed;
 	u32 check_clk;
 	u32 value;
 	int i;

 	/* power on host ip */
 	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

 	/* power on and enable u3 ports except skipped ones */
 	u3_ports_disabed = 0;
 	for (i = 0; i < num_u3p; i++) {
 		if ((0x1 << i) & ssusb->u3p_dis_msk) {
 			u3_ports_disabed++;
 			continue;
 		}

 		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
 		value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
 		value |= SSUSB_U3_PORT_HOST_SEL;
 		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
 	}

 	/* power on and enable all u2 ports */
 	for (i = 0; i < num_u2p; i++) {
 		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
 		value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
 		value |= SSUSB_U2_PORT_HOST_SEL;
 		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
 	}

 	check_clk = SSUSB_XHCI_RST_B_STS;
 	if (num_u3p > u3_ports_disabed)
 		check_clk = SSUSB_U3_MAC_RST_B_STS;

 	return ssusb_check_clocks(ssusb, check_clk);
 }

 int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 {
 	void __iomem *ibase = ssusb->ippc_base;
 	int num_u3p = ssusb->u3_ports;
 	int num_u2p = ssusb->u2_ports;
 	u32 value;
 	int ret;
 	int i;

 	/* power down and disable u3 ports except skipped ones */
 	for (i = 0; i < num_u3p; i++) {
 		if ((0x1 << i) & ssusb->u3p_dis_msk)
 			continue;

 		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
 		value |= SSUSB_U3_PORT_PDN;
 		value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
 		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
 	}

 	/* power down and disable all u2 ports */
 	for (i = 0; i < num_u2p; i++) {
 		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
 		value |= SSUSB_U2_PORT_PDN;
 		value |= suspend ? 0 : SSUSB_U2_PORT_DIS;
 		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
 	}

 	/* power down host ip */
 	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

 	if (!suspend)
 		return 0;

 	/* wait for host ip to sleep */
 	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
 			  (value & SSUSB_IP_SLEEP_STS), 100, 100000);
 	if (ret)
 		dev_err(ssusb->dev, "ip sleep failed!!!\n");

 	return ret;
 }

 static void ssusb_host_setup(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;

 	host_ports_num_get(ssusb);

 	/*
 	 * power on host and power on/enable all ports
 	 * if support OTG, gadget driver will switch port0 to device mode
 	 */
 	ssusb_host_enable(ssusb);

 	if (otg_sx->manual_drd_enabled)
 		ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);

 	/* if port0 supports dual-role, works as host mode by default */
 	ssusb_set_vbus(&ssusb->otg_switch, 1);
 }

 static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
 {
 	if (ssusb->is_host)
 		ssusb_set_vbus(&ssusb->otg_switch, 0);

 	ssusb_host_disable(ssusb, false);
 }

 /*
  * If host supports multiple ports, the VBUSes(5V) of ports except port0
  * which supports OTG are better to be enabled by default in DTS.
  * Because the host driver will keep link with devices attached when system
  * enters suspend mode, so no need to control VBUSes after initialization.
  */
 int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn)
 {
 	struct device *parent_dev = ssusb->dev;
 	int ret;

 	ssusb_host_setup(ssusb);

 	ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
 	if (ret) {
 		dev_dbg(parent_dev, "failed to create child devices at %pOF\n",
 				parent_dn);
 		return ret;
 	}

 	dev_info(parent_dev, "xHCI platform device register success...\n");

 	return 0;
 }

 void ssusb_host_exit(struct ssusb_mtk *ssusb)
 {
 	of_platform_depopulate(ssusb->dev);
 	ssusb_host_cleanup(ssusb);
 }

 int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
 {
 	if (ssusb->wakeup_en)
 		ssusb_wakeup_ip_sleep_en(ssusb);

 	return 0;
 }

 void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
 {
 	if (ssusb->wakeup_en)
 		ssusb_wakeup_ip_sleep_dis(ssusb);
 }
	// SPDX-License-Identifier: GPL-2.0
	/*
	* mtu3_dr.c - dual role switch and host glue layer
	*
	* Copyright (C) 2016 MediaTek Inc.
	*
	* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
	*/

	#include <linux/clk.h>
	#include <linux/iopoll.h>
	#include <linux/irq.h>
	#include <linux/kernel.h>
	#include <linux/mfd/syscon.h>
	#include <linux/of_device.h>
	#include <linux/regmap.h>

	#include "mtu3.h"
	#include "mtu3_dr.h"

	#define PERI_WK_CTRL1 0x404
	#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
	#define UWK_CTL1_IS_E BIT(25)
	#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
	#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
	#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
	#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */

	/*
	* ip-sleep wakeup mode:
	* all clocks can be turn off, but power domain should be kept on
	*/
	static void ssusb_wakeup_ip_sleep_en(struct ssusb_mtk *ssusb)
	{
	u32 tmp;
	struct regmap *pericfg = ssusb->pericfg;

	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
	tmp &= ~UWK_CTL1_IS_P;
	tmp &= ~(UWK_CTL1_IS_C(0xf));
	tmp \|= UWK_CTL1_IS_C(0x8);
	regmap_write(pericfg, PERI_WK_CTRL1, tmp);
	regmap_write(pericfg, PERI_WK_CTRL1, tmp \| UWK_CTL1_IS_E);

	regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
	dev_dbg(ssusb->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
	__func__, tmp);
	}

	static void ssusb_wakeup_ip_sleep_dis(struct ssusb_mtk *ssusb)
	{
	u32 tmp;

	regmap_read(ssusb->pericfg, PERI_WK_CTRL1, &tmp);
	tmp &= ~UWK_CTL1_IS_E;
	regmap_write(ssusb->pericfg, PERI_WK_CTRL1, tmp);
	}

	int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
	struct device_node *dn)
	{
	struct device *dev = ssusb->dev;

	/*
	* Wakeup function is optional, so it is not an error if this property
	* does not exist, and in such case, no need to get relative
	* properties anymore.
	*/
	ssusb->wakeup_en = of_property_read_bool(dn, "mediatek,enable-wakeup");
	if (!ssusb->wakeup_en)
	return 0;

	ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
	"mediatek,syscon-wakeup");
	if (IS_ERR(ssusb->pericfg)) {
	dev_err(dev, "fail to get pericfg regs\n");
	return PTR_ERR(ssusb->pericfg);
	}

	return 0;
	}

	static void host_ports_num_get(struct ssusb_mtk *ssusb)
	{
	u32 xhci_cap;

	xhci_cap = mtu3_readl(ssusb->ippc_base, U3D_SSUSB_IP_XHCI_CAP);
	ssusb->u2_ports = SSUSB_IP_XHCI_U2_PORT_NUM(xhci_cap);
	ssusb->u3_ports = SSUSB_IP_XHCI_U3_PORT_NUM(xhci_cap);

	dev_dbg(ssusb->dev, "host - u2_ports:%d, u3_ports:%d\n",
	ssusb->u2_ports, ssusb->u3_ports);
	}

	/* only configure ports will be used later */
	int ssusb_host_enable(struct ssusb_mtk *ssusb)
	{
	void __iomem *ibase = ssusb->ippc_base;
	int num_u3p = ssusb->u3_ports;
	int num_u2p = ssusb->u2_ports;
	int u3_ports_disabed;
	u32 check_clk;
	u32 value;
	int i;

	/* power on host ip */
	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

	/* power on and enable u3 ports except skipped ones */
	u3_ports_disabed = 0;
	for (i = 0; i < num_u3p; i++) {
	if ((0x1 << i) & ssusb->u3p_dis_msk) {
	u3_ports_disabed++;
	continue;
	}

	value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
	value &= ~(SSUSB_U3_PORT_PDN \| SSUSB_U3_PORT_DIS);
	value \|= SSUSB_U3_PORT_HOST_SEL;
	mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
	}

	/* power on and enable all u2 ports */
	for (i = 0; i < num_u2p; i++) {
	value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
	value &= ~(SSUSB_U2_PORT_PDN \| SSUSB_U2_PORT_DIS);
	value \|= SSUSB_U2_PORT_HOST_SEL;
	mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
	}

	check_clk = SSUSB_XHCI_RST_B_STS;
	if (num_u3p > u3_ports_disabed)
	check_clk = SSUSB_U3_MAC_RST_B_STS;

	return ssusb_check_clocks(ssusb, check_clk);
	}

	int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
	{
	void __iomem *ibase = ssusb->ippc_base;
	int num_u3p = ssusb->u3_ports;
	int num_u2p = ssusb->u2_ports;
	u32 value;
	int ret;
	int i;

	/* power down and disable u3 ports except skipped ones */
	for (i = 0; i < num_u3p; i++) {
	if ((0x1 << i) & ssusb->u3p_dis_msk)
	continue;

	value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
	value \|= SSUSB_U3_PORT_PDN;
	value \|= suspend ? 0 : SSUSB_U3_PORT_DIS;
	mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
	}

	/* power down and disable all u2 ports */
	for (i = 0; i < num_u2p; i++) {
	value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
	value \|= SSUSB_U2_PORT_PDN;
	value \|= suspend ? 0 : SSUSB_U2_PORT_DIS;
	mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
	}

	/* power down host ip */
	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);

	if (!suspend)
	return 0;

	/* wait for host ip to sleep */
	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
	(value & SSUSB_IP_SLEEP_STS), 100, 100000);
	if (ret)
	dev_err(ssusb->dev, "ip sleep failed!!!\n");

	return ret;
	}

	static void ssusb_host_setup(struct ssusb_mtk *ssusb)
	{
	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;

	host_ports_num_get(ssusb);

	/*
	* power on host and power on/enable all ports
	* if support OTG, gadget driver will switch port0 to device mode
	*/
	ssusb_host_enable(ssusb);

	if (otg_sx->manual_drd_enabled)
	ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);

	/* if port0 supports dual-role, works as host mode by default */
	ssusb_set_vbus(&ssusb->otg_switch, 1);
	}

	static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
	{
	if (ssusb->is_host)
	ssusb_set_vbus(&ssusb->otg_switch, 0);

	ssusb_host_disable(ssusb, false);
	}

	/*
	* If host supports multiple ports, the VBUSes(5V) of ports except port0
	* which supports OTG are better to be enabled by default in DTS.
	* Because the host driver will keep link with devices attached when system
	* enters suspend mode, so no need to control VBUSes after initialization.
	*/
	int ssusb_host_init(struct ssusb_mtk ssusb, struct device_node parent_dn)
	{
	struct device *parent_dev = ssusb->dev;
	int ret;

	ssusb_host_setup(ssusb);

	ret = of_platform_populate(parent_dn, NULL, NULL, parent_dev);
	if (ret) {
	dev_dbg(parent_dev, "failed to create child devices at %pOF\n",
	parent_dn);
	return ret;
	}

	dev_info(parent_dev, "xHCI platform device register success...\n");

	return 0;
	}

	void ssusb_host_exit(struct ssusb_mtk *ssusb)
	{
	of_platform_depopulate(ssusb->dev);
	ssusb_host_cleanup(ssusb);
	}

	int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
	{
	if (ssusb->wakeup_en)
	ssusb_wakeup_ip_sleep_en(ssusb);

	return 0;
	}

	void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
	{
	if (ssusb->wakeup_en)
	ssusb_wakeup_ip_sleep_dis(ssusb);
	}