|  | /* | 
|  | * Ingenic JZ4780 I2C bus driver | 
|  | * | 
|  | * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc. | 
|  | * Copyright (C) 2015 Imagination Technologies | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/time.h> | 
|  |  | 
|  | #define JZ4780_I2C_CTRL		0x00 | 
|  | #define JZ4780_I2C_TAR		0x04 | 
|  | #define JZ4780_I2C_SAR		0x08 | 
|  | #define JZ4780_I2C_DC		0x10 | 
|  | #define JZ4780_I2C_SHCNT	0x14 | 
|  | #define JZ4780_I2C_SLCNT	0x18 | 
|  | #define JZ4780_I2C_FHCNT	0x1C | 
|  | #define JZ4780_I2C_FLCNT	0x20 | 
|  | #define JZ4780_I2C_INTST	0x2C | 
|  | #define JZ4780_I2C_INTM		0x30 | 
|  | #define JZ4780_I2C_RXTL		0x38 | 
|  | #define JZ4780_I2C_TXTL		0x3C | 
|  | #define JZ4780_I2C_CINTR	0x40 | 
|  | #define JZ4780_I2C_CRXUF	0x44 | 
|  | #define JZ4780_I2C_CRXOF	0x48 | 
|  | #define JZ4780_I2C_CTXOF	0x4C | 
|  | #define JZ4780_I2C_CRXREQ	0x50 | 
|  | #define JZ4780_I2C_CTXABRT	0x54 | 
|  | #define JZ4780_I2C_CRXDONE	0x58 | 
|  | #define JZ4780_I2C_CACT		0x5C | 
|  | #define JZ4780_I2C_CSTP		0x60 | 
|  | #define JZ4780_I2C_CSTT		0x64 | 
|  | #define JZ4780_I2C_CGC		0x68 | 
|  | #define JZ4780_I2C_ENB		0x6C | 
|  | #define JZ4780_I2C_STA		0x70 | 
|  | #define JZ4780_I2C_TXABRT	0x80 | 
|  | #define JZ4780_I2C_DMACR	0x88 | 
|  | #define JZ4780_I2C_DMATDLR	0x8C | 
|  | #define JZ4780_I2C_DMARDLR	0x90 | 
|  | #define JZ4780_I2C_SDASU	0x94 | 
|  | #define JZ4780_I2C_ACKGC	0x98 | 
|  | #define JZ4780_I2C_ENSTA	0x9C | 
|  | #define JZ4780_I2C_SDAHD	0xD0 | 
|  |  | 
|  | #define JZ4780_I2C_CTRL_STPHLD		BIT(7) | 
|  | #define JZ4780_I2C_CTRL_SLVDIS		BIT(6) | 
|  | #define JZ4780_I2C_CTRL_REST		BIT(5) | 
|  | #define JZ4780_I2C_CTRL_MATP		BIT(4) | 
|  | #define JZ4780_I2C_CTRL_SATP		BIT(3) | 
|  | #define JZ4780_I2C_CTRL_SPDF		BIT(2) | 
|  | #define JZ4780_I2C_CTRL_SPDS		BIT(1) | 
|  | #define JZ4780_I2C_CTRL_MD		BIT(0) | 
|  |  | 
|  | #define JZ4780_I2C_STA_SLVACT		BIT(6) | 
|  | #define JZ4780_I2C_STA_MSTACT		BIT(5) | 
|  | #define JZ4780_I2C_STA_RFF		BIT(4) | 
|  | #define JZ4780_I2C_STA_RFNE		BIT(3) | 
|  | #define JZ4780_I2C_STA_TFE		BIT(2) | 
|  | #define JZ4780_I2C_STA_TFNF		BIT(1) | 
|  | #define JZ4780_I2C_STA_ACT		BIT(0) | 
|  |  | 
|  | static const char * const jz4780_i2c_abrt_src[] = { | 
|  | "ABRT_7B_ADDR_NOACK", | 
|  | "ABRT_10ADDR1_NOACK", | 
|  | "ABRT_10ADDR2_NOACK", | 
|  | "ABRT_XDATA_NOACK", | 
|  | "ABRT_GCALL_NOACK", | 
|  | "ABRT_GCALL_READ", | 
|  | "ABRT_HS_ACKD", | 
|  | "SBYTE_ACKDET", | 
|  | "ABRT_HS_NORSTRT", | 
|  | "SBYTE_NORSTRT", | 
|  | "ABRT_10B_RD_NORSTRT", | 
|  | "ABRT_MASTER_DIS", | 
|  | "ARB_LOST", | 
|  | "SLVFLUSH_TXFIFO", | 
|  | "SLV_ARBLOST", | 
|  | "SLVRD_INTX", | 
|  | }; | 
|  |  | 
|  | #define JZ4780_I2C_INTST_IGC		BIT(11) | 
|  | #define JZ4780_I2C_INTST_ISTT		BIT(10) | 
|  | #define JZ4780_I2C_INTST_ISTP		BIT(9) | 
|  | #define JZ4780_I2C_INTST_IACT		BIT(8) | 
|  | #define JZ4780_I2C_INTST_RXDN		BIT(7) | 
|  | #define JZ4780_I2C_INTST_TXABT		BIT(6) | 
|  | #define JZ4780_I2C_INTST_RDREQ		BIT(5) | 
|  | #define JZ4780_I2C_INTST_TXEMP		BIT(4) | 
|  | #define JZ4780_I2C_INTST_TXOF		BIT(3) | 
|  | #define JZ4780_I2C_INTST_RXFL		BIT(2) | 
|  | #define JZ4780_I2C_INTST_RXOF		BIT(1) | 
|  | #define JZ4780_I2C_INTST_RXUF		BIT(0) | 
|  |  | 
|  | #define JZ4780_I2C_INTM_MIGC		BIT(11) | 
|  | #define JZ4780_I2C_INTM_MISTT		BIT(10) | 
|  | #define JZ4780_I2C_INTM_MISTP		BIT(9) | 
|  | #define JZ4780_I2C_INTM_MIACT		BIT(8) | 
|  | #define JZ4780_I2C_INTM_MRXDN		BIT(7) | 
|  | #define JZ4780_I2C_INTM_MTXABT		BIT(6) | 
|  | #define JZ4780_I2C_INTM_MRDREQ		BIT(5) | 
|  | #define JZ4780_I2C_INTM_MTXEMP		BIT(4) | 
|  | #define JZ4780_I2C_INTM_MTXOF		BIT(3) | 
|  | #define JZ4780_I2C_INTM_MRXFL		BIT(2) | 
|  | #define JZ4780_I2C_INTM_MRXOF		BIT(1) | 
|  | #define JZ4780_I2C_INTM_MRXUF		BIT(0) | 
|  |  | 
|  | #define JZ4780_I2C_DC_READ		BIT(8) | 
|  |  | 
|  | #define JZ4780_I2C_SDAHD_HDENB		BIT(8) | 
|  |  | 
|  | #define JZ4780_I2C_ENB_I2C		BIT(0) | 
|  |  | 
|  | #define JZ4780_I2CSHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8)) | 
|  | #define JZ4780_I2CSLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1)) | 
|  | #define JZ4780_I2CFHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8)) | 
|  | #define JZ4780_I2CFLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1)) | 
|  |  | 
|  | #define JZ4780_I2C_FIFO_LEN	16 | 
|  | #define TX_LEVEL		3 | 
|  | #define RX_LEVEL		(JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1) | 
|  |  | 
|  | #define JZ4780_I2C_TIMEOUT	300 | 
|  |  | 
|  | #define BUFSIZE 200 | 
|  |  | 
|  | struct jz4780_i2c { | 
|  | void __iomem		*iomem; | 
|  | int			 irq; | 
|  | struct clk		*clk; | 
|  | struct i2c_adapter	 adap; | 
|  |  | 
|  | /* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */ | 
|  | spinlock_t		lock; | 
|  |  | 
|  | /* beginning of lock scope */ | 
|  | unsigned char		*rbuf; | 
|  | int			rd_total_len; | 
|  | int			rd_data_xfered; | 
|  | int			rd_cmd_xfered; | 
|  |  | 
|  | unsigned char		*wbuf; | 
|  | int			wt_len; | 
|  |  | 
|  | int			is_write; | 
|  | int			stop_hold; | 
|  | int			speed; | 
|  |  | 
|  | int			data_buf[BUFSIZE]; | 
|  | int			cmd_buf[BUFSIZE]; | 
|  | int			cmd; | 
|  |  | 
|  | /* end of lock scope */ | 
|  | struct completion	trans_waitq; | 
|  | }; | 
|  |  | 
|  | static inline unsigned short jz4780_i2c_readw(struct jz4780_i2c *i2c, | 
|  | unsigned long offset) | 
|  | { | 
|  | return readw(i2c->iomem + offset); | 
|  | } | 
|  |  | 
|  | static inline void jz4780_i2c_writew(struct jz4780_i2c *i2c, | 
|  | unsigned long offset, unsigned short val) | 
|  | { | 
|  | writew(val, i2c->iomem + offset); | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_disable(struct jz4780_i2c *i2c) | 
|  | { | 
|  | unsigned short regval; | 
|  | unsigned long loops = 5; | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 0); | 
|  |  | 
|  | do { | 
|  | regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA); | 
|  | if (!(regval & JZ4780_I2C_ENB_I2C)) | 
|  | return 0; | 
|  |  | 
|  | usleep_range(5000, 15000); | 
|  | } while (--loops); | 
|  |  | 
|  | dev_err(&i2c->adap.dev, "disable failed: ENSTA=0x%04x\n", regval); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_enable(struct jz4780_i2c *i2c) | 
|  | { | 
|  | unsigned short regval; | 
|  | unsigned long loops = 5; | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 1); | 
|  |  | 
|  | do { | 
|  | regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA); | 
|  | if (regval & JZ4780_I2C_ENB_I2C) | 
|  | return 0; | 
|  |  | 
|  | usleep_range(5000, 15000); | 
|  | } while (--loops); | 
|  |  | 
|  | dev_err(&i2c->adap.dev, "enable failed: ENSTA=0x%04x\n", regval); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address) | 
|  | { | 
|  | unsigned short regval; | 
|  | unsigned long loops = 5; | 
|  |  | 
|  | do { | 
|  | regval = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); | 
|  | if ((regval & JZ4780_I2C_STA_TFE) && | 
|  | !(regval & JZ4780_I2C_STA_MSTACT)) | 
|  | break; | 
|  |  | 
|  | usleep_range(5000, 15000); | 
|  | } while (--loops); | 
|  |  | 
|  | if (loops) { | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_TAR, address); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | dev_err(&i2c->adap.dev, | 
|  | "set device to address 0x%02x failed, STA=0x%04x\n", | 
|  | address, regval); | 
|  |  | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c) | 
|  | { | 
|  | int dev_clk_khz = clk_get_rate(i2c->clk) / 1000; | 
|  | int cnt_high = 0;	/* HIGH period count of the SCL clock */ | 
|  | int cnt_low = 0;	/* LOW period count of the SCL clock */ | 
|  | int cnt_period = 0;	/* period count of the SCL clock */ | 
|  | int setup_time = 0; | 
|  | int hold_time = 0; | 
|  | unsigned short tmp = 0; | 
|  | int i2c_clk = i2c->speed; | 
|  |  | 
|  | if (jz4780_i2c_disable(i2c)) | 
|  | dev_dbg(&i2c->adap.dev, "i2c not disabled\n"); | 
|  |  | 
|  | /* | 
|  | * 1 JZ4780_I2C cycle equals to cnt_period PCLK(i2c_clk) | 
|  | * standard mode, min LOW and HIGH period are 4700 ns and 4000 ns | 
|  | * fast mode, min LOW and HIGH period are 1300 ns and 600 ns | 
|  | */ | 
|  | cnt_period = dev_clk_khz / i2c_clk; | 
|  |  | 
|  | if (i2c_clk <= 100) | 
|  | cnt_high = (cnt_period * 4000) / (4700 + 4000); | 
|  | else | 
|  | cnt_high = (cnt_period * 600) / (1300 + 600); | 
|  |  | 
|  | cnt_low = cnt_period - cnt_high; | 
|  |  | 
|  | /* | 
|  | * NOTE: JZ4780_I2C_CTRL_REST can't set when i2c enabled, because | 
|  | * normal read are 2 messages, we cannot disable i2c controller | 
|  | * between these two messages, this means that we must always set | 
|  | * JZ4780_I2C_CTRL_REST when init JZ4780_I2C_CTRL | 
|  | * | 
|  | */ | 
|  | if (i2c_clk <= 100) { | 
|  | tmp = JZ4780_I2C_CTRL_SPDS | JZ4780_I2C_CTRL_REST | 
|  | | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_SHCNT, | 
|  | JZ4780_I2CSHCNT_ADJUST(cnt_high)); | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_SLCNT, | 
|  | JZ4780_I2CSLCNT_ADJUST(cnt_low)); | 
|  | } else { | 
|  | tmp = JZ4780_I2C_CTRL_SPDF | JZ4780_I2C_CTRL_REST | 
|  | | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_FHCNT, | 
|  | JZ4780_I2CFHCNT_ADJUST(cnt_high)); | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_FLCNT, | 
|  | JZ4780_I2CFLCNT_ADJUST(cnt_low)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * a i2c device must internally provide a hold time at least 300ns | 
|  | * tHD:DAT | 
|  | *	Standard Mode: min=300ns, max=3450ns | 
|  | *	Fast Mode: min=0ns, max=900ns | 
|  | * tSU:DAT | 
|  | *	Standard Mode: min=250ns, max=infinite | 
|  | *	Fast Mode: min=100(250ns is recommended), max=infinite | 
|  | * | 
|  | * 1i2c_clk = 10^6 / dev_clk_khz | 
|  | * on FPGA, dev_clk_khz = 12000, so 1i2c_clk = 1000/12 = 83ns | 
|  | * on Pisces(1008M), dev_clk_khz=126000, so 1i2c_clk = 1000 / 126 = 8ns | 
|  | * | 
|  | * The actual hold time is (SDAHD + 1) * (i2c_clk period). | 
|  | * | 
|  | * Length of setup time calculated using (SDASU - 1) * (ic_clk_period) | 
|  | * | 
|  | */ | 
|  | if (i2c_clk <= 100) { /* standard mode */ | 
|  | setup_time = 300; | 
|  | hold_time = 400; | 
|  | } else { | 
|  | setup_time = 450; | 
|  | hold_time = 450; | 
|  | } | 
|  |  | 
|  | hold_time = ((hold_time * dev_clk_khz) / 1000000) - 1; | 
|  | setup_time = ((setup_time * dev_clk_khz) / 1000000)  + 1; | 
|  |  | 
|  | if (setup_time > 255) | 
|  | setup_time = 255; | 
|  |  | 
|  | if (setup_time <= 0) | 
|  | setup_time = 1; | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_SDASU, setup_time); | 
|  |  | 
|  | if (hold_time > 255) | 
|  | hold_time = 255; | 
|  |  | 
|  | if (hold_time >= 0) { | 
|  | /*i2c hold time enable */ | 
|  | hold_time |= JZ4780_I2C_SDAHD_HDENB; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time); | 
|  | } else { | 
|  | /* disable hold time */ | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c) | 
|  | { | 
|  | int ret; | 
|  | unsigned long flags; | 
|  | unsigned short tmp; | 
|  |  | 
|  | spin_lock_irqsave(&i2c->lock, flags); | 
|  |  | 
|  | /* can send stop now if need */ | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); | 
|  | tmp &= ~JZ4780_I2C_CTRL_STPHLD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | /* disable all interrupts first */ | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0); | 
|  |  | 
|  | /* then clear all interrupts */ | 
|  | jz4780_i2c_readw(i2c, JZ4780_I2C_CTXABRT); | 
|  | jz4780_i2c_readw(i2c, JZ4780_I2C_CINTR); | 
|  |  | 
|  | /* then disable the controller */ | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); | 
|  | tmp &= ~JZ4780_I2C_ENB_I2C; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  | udelay(10); | 
|  | tmp |= JZ4780_I2C_ENB_I2C; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | spin_unlock_irqrestore(&i2c->lock, flags); | 
|  |  | 
|  | ret = jz4780_i2c_disable(i2c); | 
|  | if (ret) | 
|  | dev_err(&i2c->adap.dev, | 
|  | "unable to disable device during cleanup!\n"); | 
|  |  | 
|  | if (unlikely(jz4780_i2c_readw(i2c, JZ4780_I2C_INTM) | 
|  | & jz4780_i2c_readw(i2c, JZ4780_I2C_INTST))) | 
|  | dev_err(&i2c->adap.dev, | 
|  | "device has interrupts after a complete cleanup!\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_prepare(struct jz4780_i2c *i2c) | 
|  | { | 
|  | jz4780_i2c_set_speed(i2c); | 
|  | return jz4780_i2c_enable(i2c); | 
|  | } | 
|  |  | 
|  | static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < cmd_count; i++) | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ); | 
|  | } | 
|  |  | 
|  | static void jz4780_i2c_trans_done(struct jz4780_i2c *i2c) | 
|  | { | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0); | 
|  | complete(&i2c->trans_waitq); | 
|  | } | 
|  |  | 
|  | static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id) | 
|  | { | 
|  | unsigned short tmp; | 
|  | unsigned short intst; | 
|  | unsigned short intmsk; | 
|  | struct jz4780_i2c *i2c = dev_id; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&i2c->lock, flags); | 
|  | intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM); | 
|  | intst = jz4780_i2c_readw(i2c, JZ4780_I2C_INTST); | 
|  |  | 
|  | intst &= intmsk; | 
|  |  | 
|  | if (intst & JZ4780_I2C_INTST_TXABT) { | 
|  | jz4780_i2c_trans_done(i2c); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | if (intst & JZ4780_I2C_INTST_RXOF) { | 
|  | dev_dbg(&i2c->adap.dev, "received fifo overflow!\n"); | 
|  | jz4780_i2c_trans_done(i2c); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * When reading, always drain RX FIFO before we send more Read | 
|  | * Commands to avoid fifo overrun | 
|  | */ | 
|  | if (i2c->is_write == 0) { | 
|  | int rd_left; | 
|  |  | 
|  | while ((jz4780_i2c_readw(i2c, JZ4780_I2C_STA) | 
|  | & JZ4780_I2C_STA_RFNE)) { | 
|  | *(i2c->rbuf++) = jz4780_i2c_readw(i2c, JZ4780_I2C_DC) | 
|  | & 0xff; | 
|  | i2c->rd_data_xfered++; | 
|  | if (i2c->rd_data_xfered == i2c->rd_total_len) { | 
|  | jz4780_i2c_trans_done(i2c); | 
|  | goto done; | 
|  | } | 
|  | } | 
|  |  | 
|  | rd_left = i2c->rd_total_len - i2c->rd_data_xfered; | 
|  |  | 
|  | if (rd_left <= JZ4780_I2C_FIFO_LEN) | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1); | 
|  | } | 
|  |  | 
|  | if (intst & JZ4780_I2C_INTST_TXEMP) { | 
|  | if (i2c->is_write == 0) { | 
|  | int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered; | 
|  | int max_send = (JZ4780_I2C_FIFO_LEN - 1) | 
|  | - (i2c->rd_cmd_xfered | 
|  | - i2c->rd_data_xfered); | 
|  | int cmd_to_send = min(cmd_left, max_send); | 
|  |  | 
|  | if (i2c->rd_cmd_xfered != 0) | 
|  | cmd_to_send = min(cmd_to_send, | 
|  | JZ4780_I2C_FIFO_LEN | 
|  | - TX_LEVEL - 1); | 
|  |  | 
|  | if (cmd_to_send) { | 
|  | jz4780_i2c_send_rcmd(i2c, cmd_to_send); | 
|  | i2c->rd_cmd_xfered += cmd_to_send; | 
|  | } | 
|  |  | 
|  | cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered; | 
|  | if (cmd_left == 0) { | 
|  | intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM); | 
|  | intmsk &= ~JZ4780_I2C_INTM_MTXEMP; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk); | 
|  |  | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); | 
|  | tmp &= ~JZ4780_I2C_CTRL_STPHLD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  | } | 
|  | } else { | 
|  | unsigned short data; | 
|  | unsigned short i2c_sta; | 
|  |  | 
|  | i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); | 
|  |  | 
|  | while ((i2c_sta & JZ4780_I2C_STA_TFNF) && | 
|  | (i2c->wt_len > 0)) { | 
|  | i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); | 
|  | data = *i2c->wbuf; | 
|  | data &= ~JZ4780_I2C_DC_READ; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_DC, | 
|  | data); | 
|  | i2c->wbuf++; | 
|  | i2c->wt_len--; | 
|  | } | 
|  |  | 
|  | if (i2c->wt_len == 0) { | 
|  | if (!i2c->stop_hold) { | 
|  | tmp = jz4780_i2c_readw(i2c, | 
|  | JZ4780_I2C_CTRL); | 
|  | tmp &= ~JZ4780_I2C_CTRL_STPHLD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, | 
|  | tmp); | 
|  | } | 
|  |  | 
|  | jz4780_i2c_trans_done(i2c); | 
|  | goto done; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | done: | 
|  | spin_unlock_irqrestore(&i2c->lock, flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src); | 
|  | dev_err(&i2c->adap.dev, "device addr=%x\n", | 
|  | jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)); | 
|  | dev_err(&i2c->adap.dev, "send cmd count:%d  %d\n", | 
|  | i2c->cmd, i2c->cmd_buf[i2c->cmd]); | 
|  | dev_err(&i2c->adap.dev, "receive data count:%d  %d\n", | 
|  | i2c->cmd, i2c->data_buf[i2c->cmd]); | 
|  |  | 
|  | for (i = 0; i < 16; i++) { | 
|  | if (src & BIT(i)) | 
|  | dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n", | 
|  | i, jz4780_i2c_abrt_src[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c, | 
|  | unsigned char *buf, int len, int cnt, | 
|  | int idx) | 
|  | { | 
|  | int ret = 0; | 
|  | long timeout; | 
|  | int wait_time = JZ4780_I2C_TIMEOUT * (len + 5); | 
|  | unsigned short tmp; | 
|  | unsigned long flags; | 
|  |  | 
|  | memset(buf, 0, len); | 
|  |  | 
|  | spin_lock_irqsave(&i2c->lock, flags); | 
|  |  | 
|  | i2c->stop_hold = 0; | 
|  | i2c->is_write = 0; | 
|  | i2c->rbuf = buf; | 
|  | i2c->rd_total_len = len; | 
|  | i2c->rd_data_xfered = 0; | 
|  | i2c->rd_cmd_xfered = 0; | 
|  |  | 
|  | if (len <= JZ4780_I2C_FIFO_LEN) | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1); | 
|  | else | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL); | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL); | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, | 
|  | JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP | 
|  | | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF); | 
|  |  | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); | 
|  | tmp |= JZ4780_I2C_CTRL_STPHLD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | spin_unlock_irqrestore(&i2c->lock, flags); | 
|  |  | 
|  | timeout = wait_for_completion_timeout(&i2c->trans_waitq, | 
|  | msecs_to_jiffies(wait_time)); | 
|  |  | 
|  | if (!timeout) { | 
|  | dev_err(&i2c->adap.dev, "irq read timeout\n"); | 
|  | dev_dbg(&i2c->adap.dev, "send cmd count:%d  %d\n", | 
|  | i2c->cmd, i2c->cmd_buf[i2c->cmd]); | 
|  | dev_dbg(&i2c->adap.dev, "receive data count:%d  %d\n", | 
|  | i2c->cmd, i2c->data_buf[i2c->cmd]); | 
|  | ret = -EIO; | 
|  | } | 
|  |  | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT); | 
|  | if (tmp) { | 
|  | jz4780_i2c_txabrt(i2c, tmp); | 
|  | ret = -EIO; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c, | 
|  | unsigned char *buf, int len, | 
|  | int cnt, int idx) | 
|  | { | 
|  | int ret = 0; | 
|  | int wait_time = JZ4780_I2C_TIMEOUT * (len + 5); | 
|  | long timeout; | 
|  | unsigned short tmp; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&i2c->lock, flags); | 
|  |  | 
|  | if (idx < (cnt - 1)) | 
|  | i2c->stop_hold = 1; | 
|  | else | 
|  | i2c->stop_hold = 0; | 
|  |  | 
|  | i2c->is_write = 1; | 
|  | i2c->wbuf = buf; | 
|  | i2c->wt_len = len; | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL); | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP | 
|  | | JZ4780_I2C_INTM_MTXABT); | 
|  |  | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); | 
|  | tmp |= JZ4780_I2C_CTRL_STPHLD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | spin_unlock_irqrestore(&i2c->lock, flags); | 
|  |  | 
|  | timeout = wait_for_completion_timeout(&i2c->trans_waitq, | 
|  | msecs_to_jiffies(wait_time)); | 
|  | if (timeout && !i2c->stop_hold) { | 
|  | unsigned short i2c_sta; | 
|  | int write_in_process; | 
|  |  | 
|  | timeout = JZ4780_I2C_TIMEOUT * 100; | 
|  | for (; timeout > 0; timeout--) { | 
|  | i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA); | 
|  |  | 
|  | write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) || | 
|  | !(i2c_sta & JZ4780_I2C_STA_TFE); | 
|  | if (!write_in_process) | 
|  | break; | 
|  | udelay(10); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!timeout) { | 
|  | dev_err(&i2c->adap.dev, "write wait timeout\n"); | 
|  | ret = -EIO; | 
|  | } | 
|  |  | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT); | 
|  | if (tmp) { | 
|  | jz4780_i2c_txabrt(i2c, tmp); | 
|  | ret = -EIO; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, | 
|  | int count) | 
|  | { | 
|  | int i = -EIO; | 
|  | int ret = 0; | 
|  | struct jz4780_i2c *i2c = adap->algo_data; | 
|  |  | 
|  | ret = jz4780_i2c_prepare(i2c); | 
|  | if (ret) { | 
|  | dev_err(&i2c->adap.dev, "I2C prepare failed\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (msg->addr != jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)) { | 
|  | ret = jz4780_i2c_set_target(i2c, msg->addr); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  | for (i = 0; i < count; i++, msg++) { | 
|  | if (msg->flags & I2C_M_RD) | 
|  | ret = jz4780_i2c_xfer_read(i2c, msg->buf, msg->len, | 
|  | count, i); | 
|  | else | 
|  | ret = jz4780_i2c_xfer_write(i2c, msg->buf, msg->len, | 
|  | count, i); | 
|  |  | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = i; | 
|  |  | 
|  | out: | 
|  | jz4780_i2c_cleanup(i2c); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u32 jz4780_i2c_functionality(struct i2c_adapter *adap) | 
|  | { | 
|  | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | 
|  | } | 
|  |  | 
|  | static const struct i2c_algorithm jz4780_i2c_algorithm = { | 
|  | .master_xfer	= jz4780_i2c_xfer, | 
|  | .functionality	= jz4780_i2c_functionality, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id jz4780_i2c_of_matches[] = { | 
|  | { .compatible = "ingenic,jz4780-i2c", }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches); | 
|  |  | 
|  | static int jz4780_i2c_probe(struct platform_device *pdev) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned int clk_freq = 0; | 
|  | unsigned short tmp; | 
|  | struct resource *r; | 
|  | struct jz4780_i2c *i2c; | 
|  |  | 
|  | i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL); | 
|  | if (!i2c) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c->adap.owner		= THIS_MODULE; | 
|  | i2c->adap.algo		= &jz4780_i2c_algorithm; | 
|  | i2c->adap.algo_data	= i2c; | 
|  | i2c->adap.retries	= 5; | 
|  | i2c->adap.dev.parent	= &pdev->dev; | 
|  | i2c->adap.dev.of_node	= pdev->dev.of_node; | 
|  | sprintf(i2c->adap.name, "%s", pdev->name); | 
|  |  | 
|  | init_completion(&i2c->trans_waitq); | 
|  | spin_lock_init(&i2c->lock); | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | i2c->iomem = devm_ioremap_resource(&pdev->dev, r); | 
|  | if (IS_ERR(i2c->iomem)) | 
|  | return PTR_ERR(i2c->iomem); | 
|  |  | 
|  | platform_set_drvdata(pdev, i2c); | 
|  |  | 
|  | i2c->clk = devm_clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(i2c->clk)) | 
|  | return PTR_ERR(i2c->clk); | 
|  |  | 
|  | ret = clk_prepare_enable(i2c->clk); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", | 
|  | &clk_freq); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "clock-frequency not specified in DT\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | i2c->speed = clk_freq / 1000; | 
|  | if (i2c->speed == 0) { | 
|  | ret = -EINVAL; | 
|  | dev_err(&pdev->dev, "clock-frequency minimum is 1000\n"); | 
|  | goto err; | 
|  | } | 
|  | jz4780_i2c_set_speed(i2c); | 
|  |  | 
|  | dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed); | 
|  |  | 
|  | tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL); | 
|  | tmp &= ~JZ4780_I2C_CTRL_STPHLD; | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp); | 
|  |  | 
|  | jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0); | 
|  |  | 
|  | i2c->irq = platform_get_irq(pdev, 0); | 
|  | ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0, | 
|  | dev_name(&pdev->dev), i2c); | 
|  | if (ret) | 
|  | goto err; | 
|  |  | 
|  | ret = i2c_add_adapter(&i2c->adap); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | clk_disable_unprepare(i2c->clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int jz4780_i2c_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct jz4780_i2c *i2c = platform_get_drvdata(pdev); | 
|  |  | 
|  | clk_disable_unprepare(i2c->clk); | 
|  | i2c_del_adapter(&i2c->adap); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver jz4780_i2c_driver = { | 
|  | .probe		= jz4780_i2c_probe, | 
|  | .remove		= jz4780_i2c_remove, | 
|  | .driver		= { | 
|  | .name	= "jz4780-i2c", | 
|  | .of_match_table = of_match_ptr(jz4780_i2c_of_matches), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(jz4780_i2c_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("ztyan<ztyan@ingenic.cn>"); | 
|  | MODULE_DESCRIPTION("i2c driver for JZ4780 SoCs"); |