| This directory contains the following litmus tests: | |
| CoRR+poonceonce+Once.litmus | |
| Test of read-read coherence, that is, whether or not two | |
| successive reads from the same variable are ordered. | |
| CoRW+poonceonce+Once.litmus | |
| Test of read-write coherence, that is, whether or not a read | |
| from a given variable followed by a write to that same variable | |
| are ordered. | |
| CoWR+poonceonce+Once.litmus | |
| Test of write-read coherence, that is, whether or not a write | |
| to a given variable followed by a read from that same variable | |
| are ordered. | |
| CoWW+poonceonce.litmus | |
| Test of write-write coherence, that is, whether or not two | |
| successive writes to the same variable are ordered. | |
| IRIW+mbonceonces+OnceOnce.litmus | |
| Test of independent reads from independent writes with smp_mb() | |
| between each pairs of reads. In other words, is smp_mb() | |
| sufficient to cause two different reading processes to agree on | |
| the order of a pair of writes, where each write is to a different | |
| variable by a different process? This litmus test is forbidden | |
| by LKMM's propagation rule. | |
| IRIW+poonceonces+OnceOnce.litmus | |
| Test of independent reads from independent writes with nothing | |
| between each pairs of reads. In other words, is anything at all | |
| needed to cause two different reading processes to agree on the | |
| order of a pair of writes, where each write is to a different | |
| variable by a different process? | |
| ISA2+pooncelock+pooncelock+pombonce.litmus | |
| Tests whether the ordering provided by a lock-protected S | |
| litmus test is visible to an external process whose accesses are | |
| separated by smp_mb(). This addition of an external process to | |
| S is otherwise known as ISA2. | |
| ISA2+poonceonces.litmus | |
| As below, but with store-release replaced with WRITE_ONCE() | |
| and load-acquire replaced with READ_ONCE(). | |
| ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus | |
| Can a release-acquire chain order a prior store against | |
| a later load? | |
| LB+ctrlonceonce+mbonceonce.litmus | |
| Does a control dependency and an smp_mb() suffice for the | |
| load-buffering litmus test, where each process reads from one | |
| of two variables then writes to the other? | |
| LB+poacquireonce+pooncerelease.litmus | |
| Does a release-acquire pair suffice for the load-buffering | |
| litmus test, where each process reads from one of two variables then | |
| writes to the other? | |
| LB+poonceonces.litmus | |
| As above, but with store-release replaced with WRITE_ONCE() | |
| and load-acquire replaced with READ_ONCE(). | |
| MP+onceassign+derefonce.litmus | |
| As below, but with rcu_assign_pointer() and an rcu_dereference(). | |
| MP+polockmbonce+poacquiresilsil.litmus | |
| Protect the access with a lock and an smp_mb__after_spinlock() | |
| in one process, and use an acquire load followed by a pair of | |
| spin_is_locked() calls in the other process. | |
| MP+polockonce+poacquiresilsil.litmus | |
| Protect the access with a lock in one process, and use an | |
| acquire load followed by a pair of spin_is_locked() calls | |
| in the other process. | |
| MP+polocks.litmus | |
| As below, but with the second access of the writer process | |
| and the first access of reader process protected by a lock. | |
| MP+poonceonces.litmus | |
| As below, but without the smp_rmb() and smp_wmb(). | |
| MP+pooncerelease+poacquireonce.litmus | |
| As below, but with a release-acquire chain. | |
| MP+porevlocks.litmus | |
| As below, but with the first access of the writer process | |
| and the second access of reader process protected by a lock. | |
| MP+wmbonceonce+rmbonceonce.litmus | |
| Does a smp_wmb() (between the stores) and an smp_rmb() (between | |
| the loads) suffice for the message-passing litmus test, where one | |
| process writes data and then a flag, and the other process reads | |
| the flag and then the data. (This is similar to the ISA2 tests, | |
| but with two processes instead of three.) | |
| R+mbonceonces.litmus | |
| This is the fully ordered (via smp_mb()) version of one of | |
| the classic counterintuitive litmus tests that illustrates the | |
| effects of store propagation delays. | |
| R+poonceonces.litmus | |
| As above, but without the smp_mb() invocations. | |
| SB+mbonceonces.litmus | |
| This is the fully ordered (again, via smp_mb() version of store | |
| buffering, which forms the core of Dekker's mutual-exclusion | |
| algorithm. | |
| SB+poonceonces.litmus | |
| As above, but without the smp_mb() invocations. | |
| S+poonceonces.litmus | |
| As below, but without the smp_wmb() and acquire load. | |
| S+wmbonceonce+poacquireonce.litmus | |
| Can a smp_wmb(), instead of a release, and an acquire order | |
| a prior store against a subsequent store? | |
| WRC+poonceonces+Once.litmus | |
| WRC+pooncerelease+rmbonceonce+Once.litmus | |
| These two are members of an extension of the MP litmus-test | |
| class in which the first write is moved to a separate process. | |
| The second is forbidden because smp_store_release() is | |
| A-cumulative in LKMM. | |
| Z6.0+pooncelock+pooncelock+pombonce.litmus | |
| Is the ordering provided by a spin_unlock() and a subsequent | |
| spin_lock() sufficient to make ordering apparent to accesses | |
| by a process not holding the lock? | |
| Z6.0+pooncelock+poonceLock+pombonce.litmus | |
| As above, but with smp_mb__after_spinlock() immediately | |
| following the spin_lock(). | |
| Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus | |
| Is the ordering provided by a release-acquire chain sufficient | |
| to make ordering apparent to accesses by a process that does | |
| not participate in that release-acquire chain? | |
| A great many more litmus tests are available here: | |
| https://github.com/paulmckrcu/litmus |