| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2017 Intel Deutschland GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include "rate.h" | |
| #include "ieee80211_i.h" | |
| #include "debugfs.h" | |
| struct rate_control_alg { | |
| struct list_head list; | |
| const struct rate_control_ops *ops; | |
| }; | |
| static LIST_HEAD(rate_ctrl_algs); | |
| static DEFINE_MUTEX(rate_ctrl_mutex); | |
| static char *ieee80211_default_rc_algo = CONFIG_MAC80211_RC_DEFAULT; | |
| module_param(ieee80211_default_rc_algo, charp, 0644); | |
| MODULE_PARM_DESC(ieee80211_default_rc_algo, | |
| "Default rate control algorithm for mac80211 to use"); | |
| void rate_control_rate_init(struct sta_info *sta) | |
| { | |
| struct ieee80211_local *local = sta->sdata->local; | |
| struct rate_control_ref *ref = sta->rate_ctrl; | |
| struct ieee80211_sta *ista = &sta->sta; | |
| void *priv_sta = sta->rate_ctrl_priv; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| ieee80211_sta_set_rx_nss(sta); | |
| if (!ref) | |
| return; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band]; | |
| spin_lock_bh(&sta->rate_ctrl_lock); | |
| ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista, | |
| priv_sta); | |
| spin_unlock_bh(&sta->rate_ctrl_lock); | |
| rcu_read_unlock(); | |
| set_sta_flag(sta, WLAN_STA_RATE_CONTROL); | |
| } | |
| void rate_control_tx_status(struct ieee80211_local *local, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_tx_status *st) | |
| { | |
| struct rate_control_ref *ref = local->rate_ctrl; | |
| struct sta_info *sta = container_of(st->sta, struct sta_info, sta); | |
| void *priv_sta = sta->rate_ctrl_priv; | |
| if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) | |
| return; | |
| spin_lock_bh(&sta->rate_ctrl_lock); | |
| if (ref->ops->tx_status_ext) | |
| ref->ops->tx_status_ext(ref->priv, sband, priv_sta, st); | |
| else if (st->skb) | |
| ref->ops->tx_status(ref->priv, sband, st->sta, priv_sta, st->skb); | |
| else | |
| WARN_ON_ONCE(1); | |
| spin_unlock_bh(&sta->rate_ctrl_lock); | |
| } | |
| void rate_control_rate_update(struct ieee80211_local *local, | |
| struct ieee80211_supported_band *sband, | |
| struct sta_info *sta, u32 changed) | |
| { | |
| struct rate_control_ref *ref = local->rate_ctrl; | |
| struct ieee80211_sta *ista = &sta->sta; | |
| void *priv_sta = sta->rate_ctrl_priv; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| if (ref && ref->ops->rate_update) { | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sta->sdata->vif.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| spin_lock_bh(&sta->rate_ctrl_lock); | |
| ref->ops->rate_update(ref->priv, sband, &chanctx_conf->def, | |
| ista, priv_sta, changed); | |
| spin_unlock_bh(&sta->rate_ctrl_lock); | |
| rcu_read_unlock(); | |
| } | |
| drv_sta_rc_update(local, sta->sdata, &sta->sta, changed); | |
| } | |
| int ieee80211_rate_control_register(const struct rate_control_ops *ops) | |
| { | |
| struct rate_control_alg *alg; | |
| if (!ops->name) | |
| return -EINVAL; | |
| mutex_lock(&rate_ctrl_mutex); | |
| list_for_each_entry(alg, &rate_ctrl_algs, list) { | |
| if (!strcmp(alg->ops->name, ops->name)) { | |
| /* don't register an algorithm twice */ | |
| WARN_ON(1); | |
| mutex_unlock(&rate_ctrl_mutex); | |
| return -EALREADY; | |
| } | |
| } | |
| alg = kzalloc(sizeof(*alg), GFP_KERNEL); | |
| if (alg == NULL) { | |
| mutex_unlock(&rate_ctrl_mutex); | |
| return -ENOMEM; | |
| } | |
| alg->ops = ops; | |
| list_add_tail(&alg->list, &rate_ctrl_algs); | |
| mutex_unlock(&rate_ctrl_mutex); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ieee80211_rate_control_register); | |
| void ieee80211_rate_control_unregister(const struct rate_control_ops *ops) | |
| { | |
| struct rate_control_alg *alg; | |
| mutex_lock(&rate_ctrl_mutex); | |
| list_for_each_entry(alg, &rate_ctrl_algs, list) { | |
| if (alg->ops == ops) { | |
| list_del(&alg->list); | |
| kfree(alg); | |
| break; | |
| } | |
| } | |
| mutex_unlock(&rate_ctrl_mutex); | |
| } | |
| EXPORT_SYMBOL(ieee80211_rate_control_unregister); | |
| static const struct rate_control_ops * | |
| ieee80211_try_rate_control_ops_get(const char *name) | |
| { | |
| struct rate_control_alg *alg; | |
| const struct rate_control_ops *ops = NULL; | |
| if (!name) | |
| return NULL; | |
| mutex_lock(&rate_ctrl_mutex); | |
| list_for_each_entry(alg, &rate_ctrl_algs, list) { | |
| if (!strcmp(alg->ops->name, name)) { | |
| ops = alg->ops; | |
| break; | |
| } | |
| } | |
| mutex_unlock(&rate_ctrl_mutex); | |
| return ops; | |
| } | |
| /* Get the rate control algorithm. */ | |
| static const struct rate_control_ops * | |
| ieee80211_rate_control_ops_get(const char *name) | |
| { | |
| const struct rate_control_ops *ops; | |
| const char *alg_name; | |
| kernel_param_lock(THIS_MODULE); | |
| if (!name) | |
| alg_name = ieee80211_default_rc_algo; | |
| else | |
| alg_name = name; | |
| ops = ieee80211_try_rate_control_ops_get(alg_name); | |
| if (!ops && name) | |
| /* try default if specific alg requested but not found */ | |
| ops = ieee80211_try_rate_control_ops_get(ieee80211_default_rc_algo); | |
| /* Note: check for > 0 is intentional to avoid clang warning */ | |
| if (!ops && (strlen(CONFIG_MAC80211_RC_DEFAULT) > 0)) | |
| /* try built-in one if specific alg requested but not found */ | |
| ops = ieee80211_try_rate_control_ops_get(CONFIG_MAC80211_RC_DEFAULT); | |
| kernel_param_unlock(THIS_MODULE); | |
| return ops; | |
| } | |
| #ifdef CONFIG_MAC80211_DEBUGFS | |
| static ssize_t rcname_read(struct file *file, char __user *userbuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct rate_control_ref *ref = file->private_data; | |
| int len = strlen(ref->ops->name); | |
| return simple_read_from_buffer(userbuf, count, ppos, | |
| ref->ops->name, len); | |
| } | |
| static const struct file_operations rcname_ops = { | |
| .read = rcname_read, | |
| .open = simple_open, | |
| .llseek = default_llseek, | |
| }; | |
| #endif | |
| static struct rate_control_ref *rate_control_alloc(const char *name, | |
| struct ieee80211_local *local) | |
| { | |
| struct dentry *debugfsdir = NULL; | |
| struct rate_control_ref *ref; | |
| ref = kmalloc(sizeof(struct rate_control_ref), GFP_KERNEL); | |
| if (!ref) | |
| return NULL; | |
| ref->ops = ieee80211_rate_control_ops_get(name); | |
| if (!ref->ops) | |
| goto free; | |
| #ifdef CONFIG_MAC80211_DEBUGFS | |
| debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir); | |
| local->debugfs.rcdir = debugfsdir; | |
| debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops); | |
| #endif | |
| ref->priv = ref->ops->alloc(&local->hw, debugfsdir); | |
| if (!ref->priv) | |
| goto free; | |
| return ref; | |
| free: | |
| kfree(ref); | |
| return NULL; | |
| } | |
| static void rate_control_free(struct ieee80211_local *local, | |
| struct rate_control_ref *ctrl_ref) | |
| { | |
| ctrl_ref->ops->free(ctrl_ref->priv); | |
| #ifdef CONFIG_MAC80211_DEBUGFS | |
| debugfs_remove_recursive(local->debugfs.rcdir); | |
| local->debugfs.rcdir = NULL; | |
| #endif | |
| kfree(ctrl_ref); | |
| } | |
| void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_supported_band *sband; | |
| u32 user_mask, basic_rates = sdata->vif.bss_conf.basic_rates; | |
| enum nl80211_band band; | |
| if (WARN_ON(!sdata->vif.bss_conf.chandef.chan)) | |
| return; | |
| if (WARN_ON_ONCE(!basic_rates)) | |
| return; | |
| band = sdata->vif.bss_conf.chandef.chan->band; | |
| user_mask = sdata->rc_rateidx_mask[band]; | |
| sband = local->hw.wiphy->bands[band]; | |
| if (user_mask & basic_rates) | |
| return; | |
| sdata_dbg(sdata, | |
| "no overlap between basic rates (0x%x) and user mask (0x%x on band %d) - clearing the latter", | |
| basic_rates, user_mask, band); | |
| sdata->rc_rateidx_mask[band] = (1 << sband->n_bitrates) - 1; | |
| } | |
| static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc) | |
| { | |
| struct sk_buff *skb = txrc->skb; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| __le16 fc; | |
| fc = hdr->frame_control; | |
| return (info->flags & (IEEE80211_TX_CTL_NO_ACK | | |
| IEEE80211_TX_CTL_USE_MINRATE)) || | |
| !ieee80211_is_data(fc); | |
| } | |
| static void rc_send_low_basicrate(s8 *idx, u32 basic_rates, | |
| struct ieee80211_supported_band *sband) | |
| { | |
| u8 i; | |
| if (basic_rates == 0) | |
| return; /* assume basic rates unknown and accept rate */ | |
| if (*idx < 0) | |
| return; | |
| if (basic_rates & (1 << *idx)) | |
| return; /* selected rate is a basic rate */ | |
| for (i = *idx + 1; i <= sband->n_bitrates; i++) { | |
| if (basic_rates & (1 << i)) { | |
| *idx = i; | |
| return; | |
| } | |
| } | |
| /* could not find a basic rate; use original selection */ | |
| } | |
| static void __rate_control_send_low(struct ieee80211_hw *hw, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_sta *sta, | |
| struct ieee80211_tx_info *info, | |
| u32 rate_mask) | |
| { | |
| int i; | |
| u32 rate_flags = | |
| ieee80211_chandef_rate_flags(&hw->conf.chandef); | |
| if ((sband->band == NL80211_BAND_2GHZ) && | |
| (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)) | |
| rate_flags |= IEEE80211_RATE_ERP_G; | |
| info->control.rates[0].idx = 0; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| if (!(rate_mask & BIT(i))) | |
| continue; | |
| if ((rate_flags & sband->bitrates[i].flags) != rate_flags) | |
| continue; | |
| if (!rate_supported(sta, sband->band, i)) | |
| continue; | |
| info->control.rates[0].idx = i; | |
| break; | |
| } | |
| WARN_ONCE(i == sband->n_bitrates, | |
| "no supported rates (0x%x) in rate_mask 0x%x with flags 0x%x\n", | |
| sta ? sta->supp_rates[sband->band] : -1, | |
| rate_mask, rate_flags); | |
| info->control.rates[0].count = | |
| (info->flags & IEEE80211_TX_CTL_NO_ACK) ? | |
| 1 : hw->max_rate_tries; | |
| info->control.skip_table = 1; | |
| } | |
| bool rate_control_send_low(struct ieee80211_sta *pubsta, | |
| void *priv_sta, | |
| struct ieee80211_tx_rate_control *txrc) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); | |
| struct ieee80211_supported_band *sband = txrc->sband; | |
| struct sta_info *sta; | |
| int mcast_rate; | |
| bool use_basicrate = false; | |
| if (!pubsta || !priv_sta || rc_no_data_or_no_ack_use_min(txrc)) { | |
| __rate_control_send_low(txrc->hw, sband, pubsta, info, | |
| txrc->rate_idx_mask); | |
| if (!pubsta && txrc->bss) { | |
| mcast_rate = txrc->bss_conf->mcast_rate[sband->band]; | |
| if (mcast_rate > 0) { | |
| info->control.rates[0].idx = mcast_rate - 1; | |
| return true; | |
| } | |
| use_basicrate = true; | |
| } else if (pubsta) { | |
| sta = container_of(pubsta, struct sta_info, sta); | |
| if (ieee80211_vif_is_mesh(&sta->sdata->vif)) | |
| use_basicrate = true; | |
| } | |
| if (use_basicrate) | |
| rc_send_low_basicrate(&info->control.rates[0].idx, | |
| txrc->bss_conf->basic_rates, | |
| sband); | |
| return true; | |
| } | |
| return false; | |
| } | |
| EXPORT_SYMBOL(rate_control_send_low); | |
| static bool rate_idx_match_legacy_mask(s8 *rate_idx, int n_bitrates, u32 mask) | |
| { | |
| int j; | |
| /* See whether the selected rate or anything below it is allowed. */ | |
| for (j = *rate_idx; j >= 0; j--) { | |
| if (mask & (1 << j)) { | |
| /* Okay, found a suitable rate. Use it. */ | |
| *rate_idx = j; | |
| return true; | |
| } | |
| } | |
| /* Try to find a higher rate that would be allowed */ | |
| for (j = *rate_idx + 1; j < n_bitrates; j++) { | |
| if (mask & (1 << j)) { | |
| /* Okay, found a suitable rate. Use it. */ | |
| *rate_idx = j; | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static bool rate_idx_match_mcs_mask(s8 *rate_idx, u8 *mcs_mask) | |
| { | |
| int i, j; | |
| int ridx, rbit; | |
| ridx = *rate_idx / 8; | |
| rbit = *rate_idx % 8; | |
| /* sanity check */ | |
| if (ridx < 0 || ridx >= IEEE80211_HT_MCS_MASK_LEN) | |
| return false; | |
| /* See whether the selected rate or anything below it is allowed. */ | |
| for (i = ridx; i >= 0; i--) { | |
| for (j = rbit; j >= 0; j--) | |
| if (mcs_mask[i] & BIT(j)) { | |
| *rate_idx = i * 8 + j; | |
| return true; | |
| } | |
| rbit = 7; | |
| } | |
| /* Try to find a higher rate that would be allowed */ | |
| ridx = (*rate_idx + 1) / 8; | |
| rbit = (*rate_idx + 1) % 8; | |
| for (i = ridx; i < IEEE80211_HT_MCS_MASK_LEN; i++) { | |
| for (j = rbit; j < 8; j++) | |
| if (mcs_mask[i] & BIT(j)) { | |
| *rate_idx = i * 8 + j; | |
| return true; | |
| } | |
| rbit = 0; | |
| } | |
| return false; | |
| } | |
| static bool rate_idx_match_vht_mcs_mask(s8 *rate_idx, u16 *vht_mask) | |
| { | |
| int i, j; | |
| int ridx, rbit; | |
| ridx = *rate_idx >> 4; | |
| rbit = *rate_idx & 0xf; | |
| if (ridx < 0 || ridx >= NL80211_VHT_NSS_MAX) | |
| return false; | |
| /* See whether the selected rate or anything below it is allowed. */ | |
| for (i = ridx; i >= 0; i--) { | |
| for (j = rbit; j >= 0; j--) { | |
| if (vht_mask[i] & BIT(j)) { | |
| *rate_idx = (i << 4) | j; | |
| return true; | |
| } | |
| } | |
| rbit = 15; | |
| } | |
| /* Try to find a higher rate that would be allowed */ | |
| ridx = (*rate_idx + 1) >> 4; | |
| rbit = (*rate_idx + 1) & 0xf; | |
| for (i = ridx; i < NL80211_VHT_NSS_MAX; i++) { | |
| for (j = rbit; j < 16; j++) { | |
| if (vht_mask[i] & BIT(j)) { | |
| *rate_idx = (i << 4) | j; | |
| return true; | |
| } | |
| } | |
| rbit = 0; | |
| } | |
| return false; | |
| } | |
| static void rate_idx_match_mask(s8 *rate_idx, u16 *rate_flags, | |
| struct ieee80211_supported_band *sband, | |
| enum nl80211_chan_width chan_width, | |
| u32 mask, | |
| u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN], | |
| u16 vht_mask[NL80211_VHT_NSS_MAX]) | |
| { | |
| if (*rate_flags & IEEE80211_TX_RC_VHT_MCS) { | |
| /* handle VHT rates */ | |
| if (rate_idx_match_vht_mcs_mask(rate_idx, vht_mask)) | |
| return; | |
| *rate_idx = 0; | |
| /* keep protection flags */ | |
| *rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS | | |
| IEEE80211_TX_RC_USE_CTS_PROTECT | | |
| IEEE80211_TX_RC_USE_SHORT_PREAMBLE); | |
| *rate_flags |= IEEE80211_TX_RC_MCS; | |
| if (chan_width == NL80211_CHAN_WIDTH_40) | |
| *rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | |
| if (rate_idx_match_mcs_mask(rate_idx, mcs_mask)) | |
| return; | |
| /* also try the legacy rates. */ | |
| *rate_flags &= ~(IEEE80211_TX_RC_MCS | | |
| IEEE80211_TX_RC_40_MHZ_WIDTH); | |
| if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates, | |
| mask)) | |
| return; | |
| } else if (*rate_flags & IEEE80211_TX_RC_MCS) { | |
| /* handle HT rates */ | |
| if (rate_idx_match_mcs_mask(rate_idx, mcs_mask)) | |
| return; | |
| /* also try the legacy rates. */ | |
| *rate_idx = 0; | |
| /* keep protection flags */ | |
| *rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS | | |
| IEEE80211_TX_RC_USE_CTS_PROTECT | | |
| IEEE80211_TX_RC_USE_SHORT_PREAMBLE); | |
| if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates, | |
| mask)) | |
| return; | |
| } else { | |
| /* handle legacy rates */ | |
| if (rate_idx_match_legacy_mask(rate_idx, sband->n_bitrates, | |
| mask)) | |
| return; | |
| /* if HT BSS, and we handle a data frame, also try HT rates */ | |
| switch (chan_width) { | |
| case NL80211_CHAN_WIDTH_20_NOHT: | |
| case NL80211_CHAN_WIDTH_5: | |
| case NL80211_CHAN_WIDTH_10: | |
| return; | |
| default: | |
| break; | |
| } | |
| *rate_idx = 0; | |
| /* keep protection flags */ | |
| *rate_flags &= (IEEE80211_TX_RC_USE_RTS_CTS | | |
| IEEE80211_TX_RC_USE_CTS_PROTECT | | |
| IEEE80211_TX_RC_USE_SHORT_PREAMBLE); | |
| *rate_flags |= IEEE80211_TX_RC_MCS; | |
| if (chan_width == NL80211_CHAN_WIDTH_40) | |
| *rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | |
| if (rate_idx_match_mcs_mask(rate_idx, mcs_mask)) | |
| return; | |
| } | |
| /* | |
| * Uh.. No suitable rate exists. This should not really happen with | |
| * sane TX rate mask configurations. However, should someone manage to | |
| * configure supported rates and TX rate mask in incompatible way, | |
| * allow the frame to be transmitted with whatever the rate control | |
| * selected. | |
| */ | |
| } | |
| static void rate_fixup_ratelist(struct ieee80211_vif *vif, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_tx_info *info, | |
| struct ieee80211_tx_rate *rates, | |
| int max_rates) | |
| { | |
| struct ieee80211_rate *rate; | |
| bool inval = false; | |
| int i; | |
| /* | |
| * Set up the RTS/CTS rate as the fastest basic rate | |
| * that is not faster than the data rate unless there | |
| * is no basic rate slower than the data rate, in which | |
| * case we pick the slowest basic rate | |
| * | |
| * XXX: Should this check all retry rates? | |
| */ | |
| if (!(rates[0].flags & | |
| (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS))) { | |
| u32 basic_rates = vif->bss_conf.basic_rates; | |
| s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0; | |
| rate = &sband->bitrates[rates[0].idx]; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| /* must be a basic rate */ | |
| if (!(basic_rates & BIT(i))) | |
| continue; | |
| /* must not be faster than the data rate */ | |
| if (sband->bitrates[i].bitrate > rate->bitrate) | |
| continue; | |
| /* maximum */ | |
| if (sband->bitrates[baserate].bitrate < | |
| sband->bitrates[i].bitrate) | |
| baserate = i; | |
| } | |
| info->control.rts_cts_rate_idx = baserate; | |
| } | |
| for (i = 0; i < max_rates; i++) { | |
| /* | |
| * make sure there's no valid rate following | |
| * an invalid one, just in case drivers don't | |
| * take the API seriously to stop at -1. | |
| */ | |
| if (inval) { | |
| rates[i].idx = -1; | |
| continue; | |
| } | |
| if (rates[i].idx < 0) { | |
| inval = true; | |
| continue; | |
| } | |
| /* | |
| * For now assume MCS is already set up correctly, this | |
| * needs to be fixed. | |
| */ | |
| if (rates[i].flags & IEEE80211_TX_RC_MCS) { | |
| WARN_ON(rates[i].idx > 76); | |
| if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) && | |
| info->control.use_cts_prot) | |
| rates[i].flags |= | |
| IEEE80211_TX_RC_USE_CTS_PROTECT; | |
| continue; | |
| } | |
| if (rates[i].flags & IEEE80211_TX_RC_VHT_MCS) { | |
| WARN_ON(ieee80211_rate_get_vht_mcs(&rates[i]) > 9); | |
| continue; | |
| } | |
| /* set up RTS protection if desired */ | |
| if (info->control.use_rts) { | |
| rates[i].flags |= IEEE80211_TX_RC_USE_RTS_CTS; | |
| info->control.use_cts_prot = false; | |
| } | |
| /* RC is busted */ | |
| if (WARN_ON_ONCE(rates[i].idx >= sband->n_bitrates)) { | |
| rates[i].idx = -1; | |
| continue; | |
| } | |
| rate = &sband->bitrates[rates[i].idx]; | |
| /* set up short preamble */ | |
| if (info->control.short_preamble && | |
| rate->flags & IEEE80211_RATE_SHORT_PREAMBLE) | |
| rates[i].flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; | |
| /* set up G protection */ | |
| if (!(rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS) && | |
| info->control.use_cts_prot && | |
| rate->flags & IEEE80211_RATE_ERP_G) | |
| rates[i].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT; | |
| } | |
| } | |
| static void rate_control_fill_sta_table(struct ieee80211_sta *sta, | |
| struct ieee80211_tx_info *info, | |
| struct ieee80211_tx_rate *rates, | |
| int max_rates) | |
| { | |
| struct ieee80211_sta_rates *ratetbl = NULL; | |
| int i; | |
| if (sta && !info->control.skip_table) | |
| ratetbl = rcu_dereference(sta->rates); | |
| /* Fill remaining rate slots with data from the sta rate table. */ | |
| max_rates = min_t(int, max_rates, IEEE80211_TX_RATE_TABLE_SIZE); | |
| for (i = 0; i < max_rates; i++) { | |
| if (i < ARRAY_SIZE(info->control.rates) && | |
| info->control.rates[i].idx >= 0 && | |
| info->control.rates[i].count) { | |
| if (rates != info->control.rates) | |
| rates[i] = info->control.rates[i]; | |
| } else if (ratetbl) { | |
| rates[i].idx = ratetbl->rate[i].idx; | |
| rates[i].flags = ratetbl->rate[i].flags; | |
| if (info->control.use_rts) | |
| rates[i].count = ratetbl->rate[i].count_rts; | |
| else if (info->control.use_cts_prot) | |
| rates[i].count = ratetbl->rate[i].count_cts; | |
| else | |
| rates[i].count = ratetbl->rate[i].count; | |
| } else { | |
| rates[i].idx = -1; | |
| rates[i].count = 0; | |
| } | |
| if (rates[i].idx < 0 || !rates[i].count) | |
| break; | |
| } | |
| } | |
| static bool rate_control_cap_mask(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_sta *sta, u32 *mask, | |
| u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN], | |
| u16 vht_mask[NL80211_VHT_NSS_MAX]) | |
| { | |
| u32 i, flags; | |
| *mask = sdata->rc_rateidx_mask[sband->band]; | |
| flags = ieee80211_chandef_rate_flags(&sdata->vif.bss_conf.chandef); | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| if ((flags & sband->bitrates[i].flags) != flags) | |
| *mask &= ~BIT(i); | |
| } | |
| if (*mask == (1 << sband->n_bitrates) - 1 && | |
| !sdata->rc_has_mcs_mask[sband->band] && | |
| !sdata->rc_has_vht_mcs_mask[sband->band]) | |
| return false; | |
| if (sdata->rc_has_mcs_mask[sband->band]) | |
| memcpy(mcs_mask, sdata->rc_rateidx_mcs_mask[sband->band], | |
| IEEE80211_HT_MCS_MASK_LEN); | |
| else | |
| memset(mcs_mask, 0xff, IEEE80211_HT_MCS_MASK_LEN); | |
| if (sdata->rc_has_vht_mcs_mask[sband->band]) | |
| memcpy(vht_mask, sdata->rc_rateidx_vht_mcs_mask[sband->band], | |
| sizeof(u16) * NL80211_VHT_NSS_MAX); | |
| else | |
| memset(vht_mask, 0xff, sizeof(u16) * NL80211_VHT_NSS_MAX); | |
| if (sta) { | |
| __le16 sta_vht_cap; | |
| u16 sta_vht_mask[NL80211_VHT_NSS_MAX]; | |
| /* Filter out rates that the STA does not support */ | |
| *mask &= sta->supp_rates[sband->band]; | |
| for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) | |
| mcs_mask[i] &= sta->ht_cap.mcs.rx_mask[i]; | |
| sta_vht_cap = sta->vht_cap.vht_mcs.rx_mcs_map; | |
| ieee80211_get_vht_mask_from_cap(sta_vht_cap, sta_vht_mask); | |
| for (i = 0; i < NL80211_VHT_NSS_MAX; i++) | |
| vht_mask[i] &= sta_vht_mask[i]; | |
| } | |
| return true; | |
| } | |
| static void | |
| rate_control_apply_mask_ratetbl(struct sta_info *sta, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_sta_rates *rates) | |
| { | |
| int i; | |
| u32 mask; | |
| u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; | |
| u16 vht_mask[NL80211_VHT_NSS_MAX]; | |
| enum nl80211_chan_width chan_width; | |
| if (!rate_control_cap_mask(sta->sdata, sband, &sta->sta, &mask, | |
| mcs_mask, vht_mask)) | |
| return; | |
| chan_width = sta->sdata->vif.bss_conf.chandef.width; | |
| for (i = 0; i < IEEE80211_TX_RATE_TABLE_SIZE; i++) { | |
| if (rates->rate[i].idx < 0) | |
| break; | |
| rate_idx_match_mask(&rates->rate[i].idx, &rates->rate[i].flags, | |
| sband, chan_width, mask, mcs_mask, | |
| vht_mask); | |
| } | |
| } | |
| static void rate_control_apply_mask(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_sta *sta, | |
| struct ieee80211_supported_band *sband, | |
| struct ieee80211_tx_rate *rates, | |
| int max_rates) | |
| { | |
| enum nl80211_chan_width chan_width; | |
| u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; | |
| u32 mask; | |
| u16 rate_flags, vht_mask[NL80211_VHT_NSS_MAX]; | |
| int i; | |
| /* | |
| * Try to enforce the rateidx mask the user wanted. skip this if the | |
| * default mask (allow all rates) is used to save some processing for | |
| * the common case. | |
| */ | |
| if (!rate_control_cap_mask(sdata, sband, sta, &mask, mcs_mask, | |
| vht_mask)) | |
| return; | |
| /* | |
| * Make sure the rate index selected for each TX rate is | |
| * included in the configured mask and change the rate indexes | |
| * if needed. | |
| */ | |
| chan_width = sdata->vif.bss_conf.chandef.width; | |
| for (i = 0; i < max_rates; i++) { | |
| /* Skip invalid rates */ | |
| if (rates[i].idx < 0) | |
| break; | |
| rate_flags = rates[i].flags; | |
| rate_idx_match_mask(&rates[i].idx, &rate_flags, sband, | |
| chan_width, mask, mcs_mask, vht_mask); | |
| rates[i].flags = rate_flags; | |
| } | |
| } | |
| void ieee80211_get_tx_rates(struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct sk_buff *skb, | |
| struct ieee80211_tx_rate *dest, | |
| int max_rates) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_supported_band *sband; | |
| rate_control_fill_sta_table(sta, info, dest, max_rates); | |
| if (!vif) | |
| return; | |
| sdata = vif_to_sdata(vif); | |
| sband = sdata->local->hw.wiphy->bands[info->band]; | |
| if (ieee80211_is_data(hdr->frame_control)) | |
| rate_control_apply_mask(sdata, sta, sband, dest, max_rates); | |
| if (dest[0].idx < 0) | |
| __rate_control_send_low(&sdata->local->hw, sband, sta, info, | |
| sdata->rc_rateidx_mask[info->band]); | |
| if (sta) | |
| rate_fixup_ratelist(vif, sband, info, dest, max_rates); | |
| } | |
| EXPORT_SYMBOL(ieee80211_get_tx_rates); | |
| void rate_control_get_rate(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, | |
| struct ieee80211_tx_rate_control *txrc) | |
| { | |
| struct rate_control_ref *ref = sdata->local->rate_ctrl; | |
| void *priv_sta = NULL; | |
| struct ieee80211_sta *ista = NULL; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb); | |
| int i; | |
| if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) { | |
| ista = &sta->sta; | |
| priv_sta = sta->rate_ctrl_priv; | |
| } | |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | |
| info->control.rates[i].idx = -1; | |
| info->control.rates[i].flags = 0; | |
| info->control.rates[i].count = 0; | |
| } | |
| if (ieee80211_hw_check(&sdata->local->hw, HAS_RATE_CONTROL)) | |
| return; | |
| if (ista) { | |
| spin_lock_bh(&sta->rate_ctrl_lock); | |
| ref->ops->get_rate(ref->priv, ista, priv_sta, txrc); | |
| spin_unlock_bh(&sta->rate_ctrl_lock); | |
| } else { | |
| ref->ops->get_rate(ref->priv, NULL, NULL, txrc); | |
| } | |
| if (ieee80211_hw_check(&sdata->local->hw, SUPPORTS_RC_TABLE)) | |
| return; | |
| ieee80211_get_tx_rates(&sdata->vif, ista, txrc->skb, | |
| info->control.rates, | |
| ARRAY_SIZE(info->control.rates)); | |
| } | |
| int rate_control_set_rates(struct ieee80211_hw *hw, | |
| struct ieee80211_sta *pubsta, | |
| struct ieee80211_sta_rates *rates) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| struct ieee80211_sta_rates *old; | |
| struct ieee80211_supported_band *sband; | |
| sband = ieee80211_get_sband(sta->sdata); | |
| if (!sband) | |
| return -EINVAL; | |
| rate_control_apply_mask_ratetbl(sta, sband, rates); | |
| /* | |
| * mac80211 guarantees that this function will not be called | |
| * concurrently, so the following RCU access is safe, even without | |
| * extra locking. This can not be checked easily, so we just set | |
| * the condition to true. | |
| */ | |
| old = rcu_dereference_protected(pubsta->rates, true); | |
| rcu_assign_pointer(pubsta->rates, rates); | |
| if (old) | |
| kfree_rcu(old, rcu_head); | |
| drv_sta_rate_tbl_update(hw_to_local(hw), sta->sdata, pubsta); | |
| ieee80211_sta_set_expected_throughput(pubsta, sta_get_expected_throughput(sta)); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(rate_control_set_rates); | |
| int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local, | |
| const char *name) | |
| { | |
| struct rate_control_ref *ref; | |
| ASSERT_RTNL(); | |
| if (local->open_count) | |
| return -EBUSY; | |
| if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) { | |
| if (WARN_ON(!local->ops->set_rts_threshold)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| ref = rate_control_alloc(name, local); | |
| if (!ref) { | |
| wiphy_warn(local->hw.wiphy, | |
| "Failed to select rate control algorithm\n"); | |
| return -ENOENT; | |
| } | |
| WARN_ON(local->rate_ctrl); | |
| local->rate_ctrl = ref; | |
| wiphy_debug(local->hw.wiphy, "Selected rate control algorithm '%s'\n", | |
| ref->ops->name); | |
| return 0; | |
| } | |
| void rate_control_deinitialize(struct ieee80211_local *local) | |
| { | |
| struct rate_control_ref *ref; | |
| ref = local->rate_ctrl; | |
| if (!ref) | |
| return; | |
| local->rate_ctrl = NULL; | |
| rate_control_free(local, ref); | |
| } |