| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #include <linux/suspend.h> | |
| #include <linux/suspend_ioctls.h> | |
| #include <linux/utsname.h> | |
| #include <linux/freezer.h> | |
| #include <linux/compiler.h> | |
| struct swsusp_info { | |
| struct new_utsname uts; | |
| u32 version_code; | |
| unsigned long num_physpages; | |
| int cpus; | |
| unsigned long image_pages; | |
| unsigned long pages; | |
| unsigned long size; | |
| } __aligned(PAGE_SIZE); | |
| #ifdef CONFIG_HIBERNATION | |
| /* kernel/power/snapshot.c */ | |
| extern void __init hibernate_reserved_size_init(void); | |
| extern void __init hibernate_image_size_init(void); | |
| #ifdef CONFIG_ARCH_HIBERNATION_HEADER | |
| /* Maximum size of architecture specific data in a hibernation header */ | |
| #define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4) | |
| extern int arch_hibernation_header_save(void *addr, unsigned int max_size); | |
| extern int arch_hibernation_header_restore(void *addr); | |
| static inline int init_header_complete(struct swsusp_info *info) | |
| { | |
| return arch_hibernation_header_save(info, MAX_ARCH_HEADER_SIZE); | |
| } | |
| static inline char *check_image_kernel(struct swsusp_info *info) | |
| { | |
| return arch_hibernation_header_restore(info) ? | |
| "architecture specific data" : NULL; | |
| } | |
| #endif /* CONFIG_ARCH_HIBERNATION_HEADER */ | |
| extern int hibernate_resume_nonboot_cpu_disable(void); | |
| /* | |
| * Keep some memory free so that I/O operations can succeed without paging | |
| * [Might this be more than 4 MB?] | |
| */ | |
| #define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT) | |
| /* | |
| * Keep 1 MB of memory free so that device drivers can allocate some pages in | |
| * their .suspend() routines without breaking the suspend to disk. | |
| */ | |
| #define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT) | |
| asmlinkage int swsusp_save(void); | |
| /* kernel/power/hibernate.c */ | |
| extern bool freezer_test_done; | |
| extern int hibernation_snapshot(int platform_mode); | |
| extern int hibernation_restore(int platform_mode); | |
| extern int hibernation_platform_enter(void); | |
| #ifdef CONFIG_STRICT_KERNEL_RWX | |
| /* kernel/power/snapshot.c */ | |
| extern void enable_restore_image_protection(void); | |
| #else | |
| static inline void enable_restore_image_protection(void) {} | |
| #endif /* CONFIG_STRICT_KERNEL_RWX */ | |
| #else /* !CONFIG_HIBERNATION */ | |
| static inline void hibernate_reserved_size_init(void) {} | |
| static inline void hibernate_image_size_init(void) {} | |
| #endif /* !CONFIG_HIBERNATION */ | |
| extern int pfn_is_nosave(unsigned long); | |
| #define power_attr(_name) \ | |
| static struct kobj_attribute _name##_attr = { \ | |
| .attr = { \ | |
| .name = __stringify(_name), \ | |
| .mode = 0644, \ | |
| }, \ | |
| .show = _name##_show, \ | |
| .store = _name##_store, \ | |
| } | |
| #define power_attr_ro(_name) \ | |
| static struct kobj_attribute _name##_attr = { \ | |
| .attr = { \ | |
| .name = __stringify(_name), \ | |
| .mode = S_IRUGO, \ | |
| }, \ | |
| .show = _name##_show, \ | |
| } | |
| /* Preferred image size in bytes (default 500 MB) */ | |
| extern unsigned long image_size; | |
| /* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */ | |
| extern unsigned long reserved_size; | |
| extern int in_suspend; | |
| extern dev_t swsusp_resume_device; | |
| extern sector_t swsusp_resume_block; | |
| extern int create_basic_memory_bitmaps(void); | |
| extern void free_basic_memory_bitmaps(void); | |
| extern int hibernate_preallocate_memory(void); | |
| extern void clear_free_pages(void); | |
| /** | |
| * Auxiliary structure used for reading the snapshot image data and | |
| * metadata from and writing them to the list of page backup entries | |
| * (PBEs) which is the main data structure of swsusp. | |
| * | |
| * Using struct snapshot_handle we can transfer the image, including its | |
| * metadata, as a continuous sequence of bytes with the help of | |
| * snapshot_read_next() and snapshot_write_next(). | |
| * | |
| * The code that writes the image to a storage or transfers it to | |
| * the user land is required to use snapshot_read_next() for this | |
| * purpose and it should not make any assumptions regarding the internal | |
| * structure of the image. Similarly, the code that reads the image from | |
| * a storage or transfers it from the user land is required to use | |
| * snapshot_write_next(). | |
| * | |
| * This may allow us to change the internal structure of the image | |
| * in the future with considerably less effort. | |
| */ | |
| struct snapshot_handle { | |
| unsigned int cur; /* number of the block of PAGE_SIZE bytes the | |
| * next operation will refer to (ie. current) | |
| */ | |
| void *buffer; /* address of the block to read from | |
| * or write to | |
| */ | |
| int sync_read; /* Set to one to notify the caller of | |
| * snapshot_write_next() that it may | |
| * need to call wait_on_bio_chain() | |
| */ | |
| }; | |
| /* This macro returns the address from/to which the caller of | |
| * snapshot_read_next()/snapshot_write_next() is allowed to | |
| * read/write data after the function returns | |
| */ | |
| #define data_of(handle) ((handle).buffer) | |
| extern unsigned int snapshot_additional_pages(struct zone *zone); | |
| extern unsigned long snapshot_get_image_size(void); | |
| extern int snapshot_read_next(struct snapshot_handle *handle); | |
| extern int snapshot_write_next(struct snapshot_handle *handle); | |
| extern void snapshot_write_finalize(struct snapshot_handle *handle); | |
| extern int snapshot_image_loaded(struct snapshot_handle *handle); | |
| /* If unset, the snapshot device cannot be open. */ | |
| extern atomic_t snapshot_device_available; | |
| extern sector_t alloc_swapdev_block(int swap); | |
| extern void free_all_swap_pages(int swap); | |
| extern int swsusp_swap_in_use(void); | |
| /* | |
| * Flags that can be passed from the hibernatig hernel to the "boot" kernel in | |
| * the image header. | |
| */ | |
| #define SF_PLATFORM_MODE 1 | |
| #define SF_NOCOMPRESS_MODE 2 | |
| #define SF_CRC32_MODE 4 | |
| /* kernel/power/hibernate.c */ | |
| extern int swsusp_check(void); | |
| extern void swsusp_free(void); | |
| extern int swsusp_read(unsigned int *flags_p); | |
| extern int swsusp_write(unsigned int flags); | |
| extern void swsusp_close(fmode_t); | |
| #ifdef CONFIG_SUSPEND | |
| extern int swsusp_unmark(void); | |
| #endif | |
| struct timeval; | |
| /* kernel/power/swsusp.c */ | |
| extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *); | |
| #ifdef CONFIG_SUSPEND | |
| /* kernel/power/suspend.c */ | |
| extern const char * const pm_labels[]; | |
| extern const char *pm_states[]; | |
| extern const char *mem_sleep_states[]; | |
| extern int suspend_devices_and_enter(suspend_state_t state); | |
| #else /* !CONFIG_SUSPEND */ | |
| #define mem_sleep_current PM_SUSPEND_ON | |
| static inline int suspend_devices_and_enter(suspend_state_t state) | |
| { | |
| return -ENOSYS; | |
| } | |
| #endif /* !CONFIG_SUSPEND */ | |
| #ifdef CONFIG_PM_TEST_SUSPEND | |
| /* kernel/power/suspend_test.c */ | |
| extern void suspend_test_start(void); | |
| extern void suspend_test_finish(const char *label); | |
| #else /* !CONFIG_PM_TEST_SUSPEND */ | |
| static inline void suspend_test_start(void) {} | |
| static inline void suspend_test_finish(const char *label) {} | |
| #endif /* !CONFIG_PM_TEST_SUSPEND */ | |
| #ifdef CONFIG_PM_SLEEP | |
| /* kernel/power/main.c */ | |
| extern int __pm_notifier_call_chain(unsigned long val, int nr_to_call, | |
| int *nr_calls); | |
| extern int pm_notifier_call_chain(unsigned long val); | |
| #endif | |
| #ifdef CONFIG_HIGHMEM | |
| int restore_highmem(void); | |
| #else | |
| static inline unsigned int count_highmem_pages(void) { return 0; } | |
| static inline int restore_highmem(void) { return 0; } | |
| #endif | |
| /* | |
| * Suspend test levels | |
| */ | |
| enum { | |
| /* keep first */ | |
| TEST_NONE, | |
| TEST_CORE, | |
| TEST_CPUS, | |
| TEST_PLATFORM, | |
| TEST_DEVICES, | |
| TEST_FREEZER, | |
| /* keep last */ | |
| __TEST_AFTER_LAST | |
| }; | |
| #define TEST_FIRST TEST_NONE | |
| #define TEST_MAX (__TEST_AFTER_LAST - 1) | |
| #ifdef CONFIG_PM_SLEEP_DEBUG | |
| extern int pm_test_level; | |
| #else | |
| #define pm_test_level (TEST_NONE) | |
| #endif | |
| #ifdef CONFIG_SUSPEND_FREEZER | |
| static inline int suspend_freeze_processes(void) | |
| { | |
| int error; | |
| error = freeze_processes(); | |
| /* | |
| * freeze_processes() automatically thaws every task if freezing | |
| * fails. So we need not do anything extra upon error. | |
| */ | |
| if (error) | |
| return error; | |
| error = freeze_kernel_threads(); | |
| /* | |
| * freeze_kernel_threads() thaws only kernel threads upon freezing | |
| * failure. So we have to thaw the userspace tasks ourselves. | |
| */ | |
| if (error) | |
| thaw_processes(); | |
| return error; | |
| } | |
| static inline void suspend_thaw_processes(void) | |
| { | |
| thaw_processes(); | |
| } | |
| #else | |
| static inline int suspend_freeze_processes(void) | |
| { | |
| return 0; | |
| } | |
| static inline void suspend_thaw_processes(void) | |
| { | |
| } | |
| #endif | |
| #ifdef CONFIG_PM_AUTOSLEEP | |
| /* kernel/power/autosleep.c */ | |
| extern int pm_autosleep_init(void); | |
| extern int pm_autosleep_lock(void); | |
| extern void pm_autosleep_unlock(void); | |
| extern suspend_state_t pm_autosleep_state(void); | |
| extern int pm_autosleep_set_state(suspend_state_t state); | |
| #else /* !CONFIG_PM_AUTOSLEEP */ | |
| static inline int pm_autosleep_init(void) { return 0; } | |
| static inline int pm_autosleep_lock(void) { return 0; } | |
| static inline void pm_autosleep_unlock(void) {} | |
| static inline suspend_state_t pm_autosleep_state(void) { return PM_SUSPEND_ON; } | |
| #endif /* !CONFIG_PM_AUTOSLEEP */ | |
| #ifdef CONFIG_PM_WAKELOCKS | |
| /* kernel/power/wakelock.c */ | |
| extern ssize_t pm_show_wakelocks(char *buf, bool show_active); | |
| extern int pm_wake_lock(const char *buf); | |
| extern int pm_wake_unlock(const char *buf); | |
| #endif /* !CONFIG_PM_WAKELOCKS */ |