| /* | |
| * Fixed MDIO bus (MDIO bus emulation with fixed PHYs) | |
| * | |
| * Author: Vitaly Bordug <vbordug@ru.mvista.com> | |
| * Anton Vorontsov <avorontsov@ru.mvista.com> | |
| * | |
| * Copyright (c) 2006-2007 MontaVista Software, Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/list.h> | |
| #include <linux/mii.h> | |
| #include <linux/phy.h> | |
| #include <linux/phy_fixed.h> | |
| #include <linux/err.h> | |
| #include <linux/slab.h> | |
| #include <linux/of.h> | |
| #include <linux/gpio.h> | |
| #include <linux/seqlock.h> | |
| #include <linux/idr.h> | |
| #include "swphy.h" | |
| struct fixed_mdio_bus { | |
| struct mii_bus *mii_bus; | |
| struct list_head phys; | |
| }; | |
| struct fixed_phy { | |
| int addr; | |
| struct phy_device *phydev; | |
| seqcount_t seqcount; | |
| struct fixed_phy_status status; | |
| int (*link_update)(struct net_device *, struct fixed_phy_status *); | |
| struct list_head node; | |
| int link_gpio; | |
| }; | |
| static struct platform_device *pdev; | |
| static struct fixed_mdio_bus platform_fmb = { | |
| .phys = LIST_HEAD_INIT(platform_fmb.phys), | |
| }; | |
| static void fixed_phy_update(struct fixed_phy *fp) | |
| { | |
| if (gpio_is_valid(fp->link_gpio)) | |
| fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio); | |
| } | |
| static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num) | |
| { | |
| struct fixed_mdio_bus *fmb = bus->priv; | |
| struct fixed_phy *fp; | |
| list_for_each_entry(fp, &fmb->phys, node) { | |
| if (fp->addr == phy_addr) { | |
| struct fixed_phy_status state; | |
| int s; | |
| do { | |
| s = read_seqcount_begin(&fp->seqcount); | |
| /* Issue callback if user registered it. */ | |
| if (fp->link_update) { | |
| fp->link_update(fp->phydev->attached_dev, | |
| &fp->status); | |
| fixed_phy_update(fp); | |
| } | |
| state = fp->status; | |
| } while (read_seqcount_retry(&fp->seqcount, s)); | |
| return swphy_read_reg(reg_num, &state); | |
| } | |
| } | |
| return 0xFFFF; | |
| } | |
| static int fixed_mdio_write(struct mii_bus *bus, int phy_addr, int reg_num, | |
| u16 val) | |
| { | |
| return 0; | |
| } | |
| /* | |
| * If something weird is required to be done with link/speed, | |
| * network driver is able to assign a function to implement this. | |
| * May be useful for PHY's that need to be software-driven. | |
| */ | |
| int fixed_phy_set_link_update(struct phy_device *phydev, | |
| int (*link_update)(struct net_device *, | |
| struct fixed_phy_status *)) | |
| { | |
| struct fixed_mdio_bus *fmb = &platform_fmb; | |
| struct fixed_phy *fp; | |
| if (!phydev || !phydev->mdio.bus) | |
| return -EINVAL; | |
| list_for_each_entry(fp, &fmb->phys, node) { | |
| if (fp->addr == phydev->mdio.addr) { | |
| fp->link_update = link_update; | |
| fp->phydev = phydev; | |
| return 0; | |
| } | |
| } | |
| return -ENOENT; | |
| } | |
| EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); | |
| int fixed_phy_add(unsigned int irq, int phy_addr, | |
| struct fixed_phy_status *status, | |
| int link_gpio) | |
| { | |
| int ret; | |
| struct fixed_mdio_bus *fmb = &platform_fmb; | |
| struct fixed_phy *fp; | |
| ret = swphy_validate_state(status); | |
| if (ret < 0) | |
| return ret; | |
| fp = kzalloc(sizeof(*fp), GFP_KERNEL); | |
| if (!fp) | |
| return -ENOMEM; | |
| seqcount_init(&fp->seqcount); | |
| if (irq != PHY_POLL) | |
| fmb->mii_bus->irq[phy_addr] = irq; | |
| fp->addr = phy_addr; | |
| fp->status = *status; | |
| fp->link_gpio = link_gpio; | |
| if (gpio_is_valid(fp->link_gpio)) { | |
| ret = gpio_request_one(fp->link_gpio, GPIOF_DIR_IN, | |
| "fixed-link-gpio-link"); | |
| if (ret) | |
| goto err_regs; | |
| } | |
| fixed_phy_update(fp); | |
| list_add_tail(&fp->node, &fmb->phys); | |
| return 0; | |
| err_regs: | |
| kfree(fp); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(fixed_phy_add); | |
| static DEFINE_IDA(phy_fixed_ida); | |
| static void fixed_phy_del(int phy_addr) | |
| { | |
| struct fixed_mdio_bus *fmb = &platform_fmb; | |
| struct fixed_phy *fp, *tmp; | |
| list_for_each_entry_safe(fp, tmp, &fmb->phys, node) { | |
| if (fp->addr == phy_addr) { | |
| list_del(&fp->node); | |
| if (gpio_is_valid(fp->link_gpio)) | |
| gpio_free(fp->link_gpio); | |
| kfree(fp); | |
| ida_simple_remove(&phy_fixed_ida, phy_addr); | |
| return; | |
| } | |
| } | |
| } | |
| struct phy_device *fixed_phy_register(unsigned int irq, | |
| struct fixed_phy_status *status, | |
| int link_gpio, | |
| struct device_node *np) | |
| { | |
| struct fixed_mdio_bus *fmb = &platform_fmb; | |
| struct phy_device *phy; | |
| int phy_addr; | |
| int ret; | |
| if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED) | |
| return ERR_PTR(-EPROBE_DEFER); | |
| /* Get the next available PHY address, up to PHY_MAX_ADDR */ | |
| phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL); | |
| if (phy_addr < 0) | |
| return ERR_PTR(phy_addr); | |
| ret = fixed_phy_add(irq, phy_addr, status, link_gpio); | |
| if (ret < 0) { | |
| ida_simple_remove(&phy_fixed_ida, phy_addr); | |
| return ERR_PTR(ret); | |
| } | |
| phy = get_phy_device(fmb->mii_bus, phy_addr, false); | |
| if (IS_ERR(phy)) { | |
| fixed_phy_del(phy_addr); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| /* propagate the fixed link values to struct phy_device */ | |
| phy->link = status->link; | |
| if (status->link) { | |
| phy->speed = status->speed; | |
| phy->duplex = status->duplex; | |
| phy->pause = status->pause; | |
| phy->asym_pause = status->asym_pause; | |
| } | |
| of_node_get(np); | |
| phy->mdio.dev.of_node = np; | |
| phy->is_pseudo_fixed_link = true; | |
| switch (status->speed) { | |
| case SPEED_1000: | |
| phy->supported = PHY_1000BT_FEATURES; | |
| break; | |
| case SPEED_100: | |
| phy->supported = PHY_100BT_FEATURES; | |
| break; | |
| case SPEED_10: | |
| default: | |
| phy->supported = PHY_10BT_FEATURES; | |
| } | |
| ret = phy_device_register(phy); | |
| if (ret) { | |
| phy_device_free(phy); | |
| of_node_put(np); | |
| fixed_phy_del(phy_addr); | |
| return ERR_PTR(ret); | |
| } | |
| return phy; | |
| } | |
| EXPORT_SYMBOL_GPL(fixed_phy_register); | |
| void fixed_phy_unregister(struct phy_device *phy) | |
| { | |
| phy_device_remove(phy); | |
| of_node_put(phy->mdio.dev.of_node); | |
| fixed_phy_del(phy->mdio.addr); | |
| } | |
| EXPORT_SYMBOL_GPL(fixed_phy_unregister); | |
| static int __init fixed_mdio_bus_init(void) | |
| { | |
| struct fixed_mdio_bus *fmb = &platform_fmb; | |
| int ret; | |
| pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0); | |
| if (IS_ERR(pdev)) { | |
| ret = PTR_ERR(pdev); | |
| goto err_pdev; | |
| } | |
| fmb->mii_bus = mdiobus_alloc(); | |
| if (fmb->mii_bus == NULL) { | |
| ret = -ENOMEM; | |
| goto err_mdiobus_reg; | |
| } | |
| snprintf(fmb->mii_bus->id, MII_BUS_ID_SIZE, "fixed-0"); | |
| fmb->mii_bus->name = "Fixed MDIO Bus"; | |
| fmb->mii_bus->priv = fmb; | |
| fmb->mii_bus->parent = &pdev->dev; | |
| fmb->mii_bus->read = &fixed_mdio_read; | |
| fmb->mii_bus->write = &fixed_mdio_write; | |
| ret = mdiobus_register(fmb->mii_bus); | |
| if (ret) | |
| goto err_mdiobus_alloc; | |
| return 0; | |
| err_mdiobus_alloc: | |
| mdiobus_free(fmb->mii_bus); | |
| err_mdiobus_reg: | |
| platform_device_unregister(pdev); | |
| err_pdev: | |
| return ret; | |
| } | |
| module_init(fixed_mdio_bus_init); | |
| static void __exit fixed_mdio_bus_exit(void) | |
| { | |
| struct fixed_mdio_bus *fmb = &platform_fmb; | |
| struct fixed_phy *fp, *tmp; | |
| mdiobus_unregister(fmb->mii_bus); | |
| mdiobus_free(fmb->mii_bus); | |
| platform_device_unregister(pdev); | |
| list_for_each_entry_safe(fp, tmp, &fmb->phys, node) { | |
| list_del(&fp->node); | |
| kfree(fp); | |
| } | |
| ida_destroy(&phy_fixed_ida); | |
| } | |
| module_exit(fixed_mdio_bus_exit); | |
| MODULE_DESCRIPTION("Fixed MDIO bus (MDIO bus emulation with fixed PHYs)"); | |
| MODULE_AUTHOR("Vitaly Bordug"); | |
| MODULE_LICENSE("GPL"); |