| /* | |
| * Copyright (C) 1997-1998 Mark Lord | |
| * Copyright (C) 2003 Red Hat | |
| * | |
| * Some code was moved here from ide.c, see it for original copyrights. | |
| */ | |
| /* | |
| * This is the /proc/ide/ filesystem implementation. | |
| * | |
| * Drive/Driver settings can be retrieved by reading the drive's | |
| * "settings" files. e.g. "cat /proc/ide0/hda/settings" | |
| * To write a new value "val" into a specific setting "name", use: | |
| * echo "name:val" >/proc/ide/ide0/hda/settings | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/errno.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/stat.h> | |
| #include <linux/mm.h> | |
| #include <linux/pci.h> | |
| #include <linux/ctype.h> | |
| #include <linux/ide.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <asm/io.h> | |
| static struct proc_dir_entry *proc_ide_root; | |
| static int ide_imodel_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_hwif_t *hwif = (ide_hwif_t *) m->private; | |
| const char *name; | |
| switch (hwif->chipset) { | |
| case ide_generic: name = "generic"; break; | |
| case ide_pci: name = "pci"; break; | |
| case ide_cmd640: name = "cmd640"; break; | |
| case ide_dtc2278: name = "dtc2278"; break; | |
| case ide_ali14xx: name = "ali14xx"; break; | |
| case ide_qd65xx: name = "qd65xx"; break; | |
| case ide_umc8672: name = "umc8672"; break; | |
| case ide_ht6560b: name = "ht6560b"; break; | |
| case ide_4drives: name = "4drives"; break; | |
| case ide_pmac: name = "mac-io"; break; | |
| case ide_au1xxx: name = "au1xxx"; break; | |
| case ide_palm3710: name = "palm3710"; break; | |
| case ide_acorn: name = "acorn"; break; | |
| default: name = "(unknown)"; break; | |
| } | |
| seq_printf(m, "%s\n", name); | |
| return 0; | |
| } | |
| static int ide_mate_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_hwif_t *hwif = (ide_hwif_t *) m->private; | |
| if (hwif && hwif->mate) | |
| seq_printf(m, "%s\n", hwif->mate->name); | |
| else | |
| seq_printf(m, "(none)\n"); | |
| return 0; | |
| } | |
| static int ide_channel_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_hwif_t *hwif = (ide_hwif_t *) m->private; | |
| seq_printf(m, "%c\n", hwif->channel ? '1' : '0'); | |
| return 0; | |
| } | |
| static int ide_identify_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *)m->private; | |
| u8 *buf; | |
| if (!drive) { | |
| seq_putc(m, '\n'); | |
| return 0; | |
| } | |
| buf = kmalloc(SECTOR_SIZE, GFP_KERNEL); | |
| if (!buf) | |
| return -ENOMEM; | |
| if (taskfile_lib_get_identify(drive, buf) == 0) { | |
| __le16 *val = (__le16 *)buf; | |
| int i; | |
| for (i = 0; i < SECTOR_SIZE / 2; i++) { | |
| seq_printf(m, "%04x%c", le16_to_cpu(val[i]), | |
| (i % 8) == 7 ? '\n' : ' '); | |
| } | |
| } else | |
| seq_putc(m, buf[0]); | |
| kfree(buf); | |
| return 0; | |
| } | |
| /** | |
| * ide_find_setting - find a specific setting | |
| * @st: setting table pointer | |
| * @name: setting name | |
| * | |
| * Scan's the setting table for a matching entry and returns | |
| * this or NULL if no entry is found. The caller must hold the | |
| * setting semaphore | |
| */ | |
| static | |
| const struct ide_proc_devset *ide_find_setting(const struct ide_proc_devset *st, | |
| char *name) | |
| { | |
| while (st->name) { | |
| if (strcmp(st->name, name) == 0) | |
| break; | |
| st++; | |
| } | |
| return st->name ? st : NULL; | |
| } | |
| /** | |
| * ide_read_setting - read an IDE setting | |
| * @drive: drive to read from | |
| * @setting: drive setting | |
| * | |
| * Read a drive setting and return the value. The caller | |
| * must hold the ide_setting_mtx when making this call. | |
| * | |
| * BUGS: the data return and error are the same return value | |
| * so an error -EINVAL and true return of the same value cannot | |
| * be told apart | |
| */ | |
| static int ide_read_setting(ide_drive_t *drive, | |
| const struct ide_proc_devset *setting) | |
| { | |
| const struct ide_devset *ds = setting->setting; | |
| int val = -EINVAL; | |
| if (ds->get) | |
| val = ds->get(drive); | |
| return val; | |
| } | |
| /** | |
| * ide_write_setting - read an IDE setting | |
| * @drive: drive to read from | |
| * @setting: drive setting | |
| * @val: value | |
| * | |
| * Write a drive setting if it is possible. The caller | |
| * must hold the ide_setting_mtx when making this call. | |
| * | |
| * BUGS: the data return and error are the same return value | |
| * so an error -EINVAL and true return of the same value cannot | |
| * be told apart | |
| * | |
| * FIXME: This should be changed to enqueue a special request | |
| * to the driver to change settings, and then wait on a sema for completion. | |
| * The current scheme of polling is kludgy, though safe enough. | |
| */ | |
| static int ide_write_setting(ide_drive_t *drive, | |
| const struct ide_proc_devset *setting, int val) | |
| { | |
| const struct ide_devset *ds = setting->setting; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EACCES; | |
| if (!ds->set) | |
| return -EPERM; | |
| if ((ds->flags & DS_SYNC) | |
| && (val < setting->min || val > setting->max)) | |
| return -EINVAL; | |
| return ide_devset_execute(drive, ds, val); | |
| } | |
| ide_devset_get(xfer_rate, current_speed); | |
| static int set_xfer_rate (ide_drive_t *drive, int arg) | |
| { | |
| struct ide_cmd cmd; | |
| if (arg < XFER_PIO_0 || arg > XFER_UDMA_6) | |
| return -EINVAL; | |
| memset(&cmd, 0, sizeof(cmd)); | |
| cmd.tf.command = ATA_CMD_SET_FEATURES; | |
| cmd.tf.feature = SETFEATURES_XFER; | |
| cmd.tf.nsect = (u8)arg; | |
| cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; | |
| cmd.valid.in.tf = IDE_VALID_NSECT; | |
| cmd.tf_flags = IDE_TFLAG_SET_XFER; | |
| return ide_no_data_taskfile(drive, &cmd); | |
| } | |
| ide_devset_rw(current_speed, xfer_rate); | |
| ide_devset_rw_field(init_speed, init_speed); | |
| ide_devset_rw_flag(nice1, IDE_DFLAG_NICE1); | |
| ide_devset_rw_field(number, dn); | |
| static const struct ide_proc_devset ide_generic_settings[] = { | |
| IDE_PROC_DEVSET(current_speed, 0, 70), | |
| IDE_PROC_DEVSET(init_speed, 0, 70), | |
| IDE_PROC_DEVSET(io_32bit, 0, 1 + (SUPPORT_VLB_SYNC << 1)), | |
| IDE_PROC_DEVSET(keepsettings, 0, 1), | |
| IDE_PROC_DEVSET(nice1, 0, 1), | |
| IDE_PROC_DEVSET(number, 0, 3), | |
| IDE_PROC_DEVSET(pio_mode, 0, 255), | |
| IDE_PROC_DEVSET(unmaskirq, 0, 1), | |
| IDE_PROC_DEVSET(using_dma, 0, 1), | |
| { NULL }, | |
| }; | |
| static void proc_ide_settings_warn(void) | |
| { | |
| printk_once(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is " | |
| "obsolete, and will be removed soon!\n"); | |
| } | |
| static int ide_settings_proc_show(struct seq_file *m, void *v) | |
| { | |
| const struct ide_proc_devset *setting, *g, *d; | |
| const struct ide_devset *ds; | |
| ide_drive_t *drive = (ide_drive_t *) m->private; | |
| int rc, mul_factor, div_factor; | |
| proc_ide_settings_warn(); | |
| mutex_lock(&ide_setting_mtx); | |
| g = ide_generic_settings; | |
| d = drive->settings; | |
| seq_printf(m, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); | |
| seq_printf(m, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); | |
| while (g->name || (d && d->name)) { | |
| /* read settings in the alphabetical order */ | |
| if (g->name && d && d->name) { | |
| if (strcmp(d->name, g->name) < 0) | |
| setting = d++; | |
| else | |
| setting = g++; | |
| } else if (d && d->name) { | |
| setting = d++; | |
| } else | |
| setting = g++; | |
| mul_factor = setting->mulf ? setting->mulf(drive) : 1; | |
| div_factor = setting->divf ? setting->divf(drive) : 1; | |
| seq_printf(m, "%-24s", setting->name); | |
| rc = ide_read_setting(drive, setting); | |
| if (rc >= 0) | |
| seq_printf(m, "%-16d", rc * mul_factor / div_factor); | |
| else | |
| seq_printf(m, "%-16s", "write-only"); | |
| seq_printf(m, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); | |
| ds = setting->setting; | |
| if (ds->get) | |
| seq_printf(m, "r"); | |
| if (ds->set) | |
| seq_printf(m, "w"); | |
| seq_printf(m, "\n"); | |
| } | |
| mutex_unlock(&ide_setting_mtx); | |
| return 0; | |
| } | |
| static int ide_settings_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, ide_settings_proc_show, PDE_DATA(inode)); | |
| } | |
| #define MAX_LEN 30 | |
| static ssize_t ide_settings_proc_write(struct file *file, const char __user *buffer, | |
| size_t count, loff_t *pos) | |
| { | |
| ide_drive_t *drive = PDE_DATA(file_inode(file)); | |
| char name[MAX_LEN + 1]; | |
| int for_real = 0, mul_factor, div_factor; | |
| unsigned long n; | |
| const struct ide_proc_devset *setting; | |
| char *buf, *s; | |
| if (!capable(CAP_SYS_ADMIN)) | |
| return -EACCES; | |
| proc_ide_settings_warn(); | |
| if (count >= PAGE_SIZE) | |
| return -EINVAL; | |
| s = buf = (char *)__get_free_page(GFP_USER); | |
| if (!buf) | |
| return -ENOMEM; | |
| if (copy_from_user(buf, buffer, count)) { | |
| free_page((unsigned long)buf); | |
| return -EFAULT; | |
| } | |
| buf[count] = '\0'; | |
| /* | |
| * Skip over leading whitespace | |
| */ | |
| while (count && isspace(*s)) { | |
| --count; | |
| ++s; | |
| } | |
| /* | |
| * Do one full pass to verify all parameters, | |
| * then do another to actually write the new settings. | |
| */ | |
| do { | |
| char *p = s; | |
| n = count; | |
| while (n > 0) { | |
| unsigned val; | |
| char *q = p; | |
| while (n > 0 && *p != ':') { | |
| --n; | |
| p++; | |
| } | |
| if (*p != ':') | |
| goto parse_error; | |
| if (p - q > MAX_LEN) | |
| goto parse_error; | |
| memcpy(name, q, p - q); | |
| name[p - q] = 0; | |
| if (n > 0) { | |
| --n; | |
| p++; | |
| } else | |
| goto parse_error; | |
| val = simple_strtoul(p, &q, 10); | |
| n -= q - p; | |
| p = q; | |
| if (n > 0 && !isspace(*p)) | |
| goto parse_error; | |
| while (n > 0 && isspace(*p)) { | |
| --n; | |
| ++p; | |
| } | |
| mutex_lock(&ide_setting_mtx); | |
| /* generic settings first, then driver specific ones */ | |
| setting = ide_find_setting(ide_generic_settings, name); | |
| if (!setting) { | |
| if (drive->settings) | |
| setting = ide_find_setting(drive->settings, name); | |
| if (!setting) { | |
| mutex_unlock(&ide_setting_mtx); | |
| goto parse_error; | |
| } | |
| } | |
| if (for_real) { | |
| mul_factor = setting->mulf ? setting->mulf(drive) : 1; | |
| div_factor = setting->divf ? setting->divf(drive) : 1; | |
| ide_write_setting(drive, setting, val * div_factor / mul_factor); | |
| } | |
| mutex_unlock(&ide_setting_mtx); | |
| } | |
| } while (!for_real++); | |
| free_page((unsigned long)buf); | |
| return count; | |
| parse_error: | |
| free_page((unsigned long)buf); | |
| printk("%s(): parse error\n", __func__); | |
| return -EINVAL; | |
| } | |
| static const struct file_operations ide_settings_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = ide_settings_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| .write = ide_settings_proc_write, | |
| }; | |
| int ide_capacity_proc_show(struct seq_file *m, void *v) | |
| { | |
| seq_printf(m, "%llu\n", (long long)0x7fffffff); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ide_capacity_proc_show); | |
| int ide_geometry_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) m->private; | |
| seq_printf(m, "physical %d/%d/%d\n", | |
| drive->cyl, drive->head, drive->sect); | |
| seq_printf(m, "logical %d/%d/%d\n", | |
| drive->bios_cyl, drive->bios_head, drive->bios_sect); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ide_geometry_proc_show); | |
| static int ide_dmodel_proc_show(struct seq_file *seq, void *v) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) seq->private; | |
| char *m = (char *)&drive->id[ATA_ID_PROD]; | |
| seq_printf(seq, "%.40s\n", m[0] ? m : "(none)"); | |
| return 0; | |
| } | |
| static int ide_driver_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *)m->private; | |
| struct device *dev = &drive->gendev; | |
| struct ide_driver *ide_drv; | |
| if (dev->driver) { | |
| ide_drv = to_ide_driver(dev->driver); | |
| seq_printf(m, "%s version %s\n", | |
| dev->driver->name, ide_drv->version); | |
| } else | |
| seq_printf(m, "ide-default version 0.9.newide\n"); | |
| return 0; | |
| } | |
| static int ide_media_proc_show(struct seq_file *m, void *v) | |
| { | |
| ide_drive_t *drive = (ide_drive_t *) m->private; | |
| const char *media; | |
| switch (drive->media) { | |
| case ide_disk: media = "disk\n"; break; | |
| case ide_cdrom: media = "cdrom\n"; break; | |
| case ide_tape: media = "tape\n"; break; | |
| case ide_floppy: media = "floppy\n"; break; | |
| case ide_optical: media = "optical\n"; break; | |
| default: media = "UNKNOWN\n"; break; | |
| } | |
| seq_puts(m, media); | |
| return 0; | |
| } | |
| static int ide_media_proc_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, ide_media_proc_show, PDE_DATA(inode)); | |
| } | |
| static const struct file_operations ide_media_proc_fops = { | |
| .owner = THIS_MODULE, | |
| .open = ide_media_proc_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| static ide_proc_entry_t generic_drive_entries[] = { | |
| { "driver", S_IFREG|S_IRUGO, ide_driver_proc_show }, | |
| { "identify", S_IFREG|S_IRUSR, ide_identify_proc_show }, | |
| { "media", S_IFREG|S_IRUGO, ide_media_proc_show }, | |
| { "model", S_IFREG|S_IRUGO, ide_dmodel_proc_show }, | |
| {} | |
| }; | |
| static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) | |
| { | |
| struct proc_dir_entry *ent; | |
| if (!dir || !p) | |
| return; | |
| while (p->name != NULL) { | |
| ent = proc_create_single_data(p->name, p->mode, dir, p->show, data); | |
| if (!ent) return; | |
| p++; | |
| } | |
| } | |
| static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) | |
| { | |
| if (!dir || !p) | |
| return; | |
| while (p->name != NULL) { | |
| remove_proc_entry(p->name, dir); | |
| p++; | |
| } | |
| } | |
| void ide_proc_register_driver(ide_drive_t *drive, struct ide_driver *driver) | |
| { | |
| mutex_lock(&ide_setting_mtx); | |
| drive->settings = driver->proc_devsets(drive); | |
| mutex_unlock(&ide_setting_mtx); | |
| ide_add_proc_entries(drive->proc, driver->proc_entries(drive), drive); | |
| } | |
| EXPORT_SYMBOL(ide_proc_register_driver); | |
| /** | |
| * ide_proc_unregister_driver - remove driver specific data | |
| * @drive: drive | |
| * @driver: driver | |
| * | |
| * Clean up the driver specific /proc files and IDE settings | |
| * for a given drive. | |
| * | |
| * Takes ide_setting_mtx. | |
| */ | |
| void ide_proc_unregister_driver(ide_drive_t *drive, struct ide_driver *driver) | |
| { | |
| ide_remove_proc_entries(drive->proc, driver->proc_entries(drive)); | |
| mutex_lock(&ide_setting_mtx); | |
| /* | |
| * ide_setting_mtx protects both the settings list and the use | |
| * of settings (we cannot take a setting out that is being used). | |
| */ | |
| drive->settings = NULL; | |
| mutex_unlock(&ide_setting_mtx); | |
| } | |
| EXPORT_SYMBOL(ide_proc_unregister_driver); | |
| void ide_proc_port_register_devices(ide_hwif_t *hwif) | |
| { | |
| struct proc_dir_entry *ent; | |
| struct proc_dir_entry *parent = hwif->proc; | |
| ide_drive_t *drive; | |
| char name[64]; | |
| int i; | |
| ide_port_for_each_dev(i, drive, hwif) { | |
| if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) | |
| continue; | |
| drive->proc = proc_mkdir(drive->name, parent); | |
| if (drive->proc) { | |
| ide_add_proc_entries(drive->proc, generic_drive_entries, drive); | |
| proc_create_data("setting", S_IFREG|S_IRUSR|S_IWUSR, | |
| drive->proc, &ide_settings_proc_fops, | |
| drive); | |
| } | |
| sprintf(name, "ide%d/%s", (drive->name[2]-'a')/2, drive->name); | |
| ent = proc_symlink(drive->name, proc_ide_root, name); | |
| if (!ent) return; | |
| } | |
| } | |
| void ide_proc_unregister_device(ide_drive_t *drive) | |
| { | |
| if (drive->proc) { | |
| remove_proc_entry("settings", drive->proc); | |
| ide_remove_proc_entries(drive->proc, generic_drive_entries); | |
| remove_proc_entry(drive->name, proc_ide_root); | |
| remove_proc_entry(drive->name, drive->hwif->proc); | |
| drive->proc = NULL; | |
| } | |
| } | |
| static ide_proc_entry_t hwif_entries[] = { | |
| { "channel", S_IFREG|S_IRUGO, ide_channel_proc_show }, | |
| { "mate", S_IFREG|S_IRUGO, ide_mate_proc_show }, | |
| { "model", S_IFREG|S_IRUGO, ide_imodel_proc_show }, | |
| {} | |
| }; | |
| void ide_proc_register_port(ide_hwif_t *hwif) | |
| { | |
| if (!hwif->proc) { | |
| hwif->proc = proc_mkdir(hwif->name, proc_ide_root); | |
| if (!hwif->proc) | |
| return; | |
| ide_add_proc_entries(hwif->proc, hwif_entries, hwif); | |
| } | |
| } | |
| void ide_proc_unregister_port(ide_hwif_t *hwif) | |
| { | |
| if (hwif->proc) { | |
| ide_remove_proc_entries(hwif->proc, hwif_entries); | |
| remove_proc_entry(hwif->name, proc_ide_root); | |
| hwif->proc = NULL; | |
| } | |
| } | |
| static int proc_print_driver(struct device_driver *drv, void *data) | |
| { | |
| struct ide_driver *ide_drv = to_ide_driver(drv); | |
| struct seq_file *s = data; | |
| seq_printf(s, "%s version %s\n", drv->name, ide_drv->version); | |
| return 0; | |
| } | |
| static int ide_drivers_show(struct seq_file *s, void *p) | |
| { | |
| int err; | |
| err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); | |
| if (err < 0) | |
| printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n", | |
| __func__, err); | |
| return 0; | |
| } | |
| static int ide_drivers_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, &ide_drivers_show, NULL); | |
| } | |
| static const struct file_operations ide_drivers_operations = { | |
| .owner = THIS_MODULE, | |
| .open = ide_drivers_open, | |
| .read = seq_read, | |
| .llseek = seq_lseek, | |
| .release = single_release, | |
| }; | |
| void proc_ide_create(void) | |
| { | |
| proc_ide_root = proc_mkdir("ide", NULL); | |
| if (!proc_ide_root) | |
| return; | |
| proc_create("drivers", 0, proc_ide_root, &ide_drivers_operations); | |
| } | |
| void proc_ide_destroy(void) | |
| { | |
| remove_proc_entry("drivers", proc_ide_root); | |
| remove_proc_entry("ide", NULL); | |
| } |