| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef __PARISC_UACCESS_H | |
| #define __PARISC_UACCESS_H | |
| /* | |
| * User space memory access functions | |
| */ | |
| #include <asm/page.h> | |
| #include <asm/cache.h> | |
| #include <linux/bug.h> | |
| #include <linux/string.h> | |
| #define KERNEL_DS ((mm_segment_t){0}) | |
| #define USER_DS ((mm_segment_t){1}) | |
| #define segment_eq(a, b) ((a).seg == (b).seg) | |
| #define get_ds() (KERNEL_DS) | |
| #define get_fs() (current_thread_info()->addr_limit) | |
| #define set_fs(x) (current_thread_info()->addr_limit = (x)) | |
| /* | |
| * Note that since kernel addresses are in a separate address space on | |
| * parisc, we don't need to do anything for access_ok(). | |
| * We just let the page fault handler do the right thing. This also means | |
| * that put_user is the same as __put_user, etc. | |
| */ | |
| #define access_ok(type, uaddr, size) \ | |
| ( (uaddr) == (uaddr) ) | |
| #define put_user __put_user | |
| #define get_user __get_user | |
| #if !defined(CONFIG_64BIT) | |
| #define LDD_USER(val, ptr) __get_user_asm64(val, ptr) | |
| #define STD_USER(x, ptr) __put_user_asm64(x, ptr) | |
| #else | |
| #define LDD_USER(val, ptr) __get_user_asm(val, "ldd", ptr) | |
| #define STD_USER(x, ptr) __put_user_asm("std", x, ptr) | |
| #endif | |
| /* | |
| * The exception table contains two values: the first is the relative offset to | |
| * the address of the instruction that is allowed to fault, and the second is | |
| * the relative offset to the address of the fixup routine. Since relative | |
| * addresses are used, 32bit values are sufficient even on 64bit kernel. | |
| */ | |
| #define ARCH_HAS_RELATIVE_EXTABLE | |
| struct exception_table_entry { | |
| int insn; /* relative address of insn that is allowed to fault. */ | |
| int fixup; /* relative address of fixup routine */ | |
| }; | |
| #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\ | |
| ".section __ex_table,\"aw\"\n" \ | |
| ".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \ | |
| ".previous\n" | |
| /* | |
| * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry | |
| * (with lowest bit set) for which the fault handler in fixup_exception() will | |
| * load -EFAULT into %r8 for a read or write fault, and zeroes the target | |
| * register in case of a read fault in get_user(). | |
| */ | |
| #define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\ | |
| ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1) | |
| /* | |
| * load_sr2() preloads the space register %%sr2 - based on the value of | |
| * get_fs() - with either a value of 0 to access kernel space (KERNEL_DS which | |
| * is 0), or with the current value of %%sr3 to access user space (USER_DS) | |
| * memory. The following __get_user_asm() and __put_user_asm() functions have | |
| * %%sr2 hard-coded to access the requested memory. | |
| */ | |
| #define load_sr2() \ | |
| __asm__(" or,= %0,%%r0,%%r0\n\t" \ | |
| " mfsp %%sr3,%0\n\t" \ | |
| " mtsp %0,%%sr2\n\t" \ | |
| : : "r"(get_fs()) : ) | |
| #define __get_user_internal(val, ptr) \ | |
| ({ \ | |
| register long __gu_err __asm__ ("r8") = 0; \ | |
| \ | |
| switch (sizeof(*(ptr))) { \ | |
| case 1: __get_user_asm(val, "ldb", ptr); break; \ | |
| case 2: __get_user_asm(val, "ldh", ptr); break; \ | |
| case 4: __get_user_asm(val, "ldw", ptr); break; \ | |
| case 8: LDD_USER(val, ptr); break; \ | |
| default: BUILD_BUG(); \ | |
| } \ | |
| \ | |
| __gu_err; \ | |
| }) | |
| #define __get_user(val, ptr) \ | |
| ({ \ | |
| load_sr2(); \ | |
| __get_user_internal(val, ptr); \ | |
| }) | |
| #define __get_user_asm(val, ldx, ptr) \ | |
| { \ | |
| register long __gu_val; \ | |
| \ | |
| __asm__("1: " ldx " 0(%%sr2,%2),%0\n" \ | |
| "9:\n" \ | |
| ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ | |
| : "=r"(__gu_val), "=r"(__gu_err) \ | |
| : "r"(ptr), "1"(__gu_err)); \ | |
| \ | |
| (val) = (__force __typeof__(*(ptr))) __gu_val; \ | |
| } | |
| #if !defined(CONFIG_64BIT) | |
| #define __get_user_asm64(val, ptr) \ | |
| { \ | |
| union { \ | |
| unsigned long long l; \ | |
| __typeof__(*(ptr)) t; \ | |
| } __gu_tmp; \ | |
| \ | |
| __asm__(" copy %%r0,%R0\n" \ | |
| "1: ldw 0(%%sr2,%2),%0\n" \ | |
| "2: ldw 4(%%sr2,%2),%R0\n" \ | |
| "9:\n" \ | |
| ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ | |
| ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \ | |
| : "=&r"(__gu_tmp.l), "=r"(__gu_err) \ | |
| : "r"(ptr), "1"(__gu_err)); \ | |
| \ | |
| (val) = __gu_tmp.t; \ | |
| } | |
| #endif /* !defined(CONFIG_64BIT) */ | |
| #define __put_user_internal(x, ptr) \ | |
| ({ \ | |
| register long __pu_err __asm__ ("r8") = 0; \ | |
| __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x); \ | |
| \ | |
| switch (sizeof(*(ptr))) { \ | |
| case 1: __put_user_asm("stb", __x, ptr); break; \ | |
| case 2: __put_user_asm("sth", __x, ptr); break; \ | |
| case 4: __put_user_asm("stw", __x, ptr); break; \ | |
| case 8: STD_USER(__x, ptr); break; \ | |
| default: BUILD_BUG(); \ | |
| } \ | |
| \ | |
| __pu_err; \ | |
| }) | |
| #define __put_user(x, ptr) \ | |
| ({ \ | |
| load_sr2(); \ | |
| __put_user_internal(x, ptr); \ | |
| }) | |
| /* | |
| * The "__put_user/kernel_asm()" macros tell gcc they read from memory | |
| * instead of writing. This is because they do not write to any memory | |
| * gcc knows about, so there are no aliasing issues. These macros must | |
| * also be aware that fixups are executed in the context of the fault, | |
| * and any registers used there must be listed as clobbers. | |
| * r8 is already listed as err. | |
| */ | |
| #define __put_user_asm(stx, x, ptr) \ | |
| __asm__ __volatile__ ( \ | |
| "1: " stx " %2,0(%%sr2,%1)\n" \ | |
| "9:\n" \ | |
| ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ | |
| : "=r"(__pu_err) \ | |
| : "r"(ptr), "r"(x), "0"(__pu_err)) | |
| #if !defined(CONFIG_64BIT) | |
| #define __put_user_asm64(__val, ptr) do { \ | |
| __asm__ __volatile__ ( \ | |
| "1: stw %2,0(%%sr2,%1)\n" \ | |
| "2: stw %R2,4(%%sr2,%1)\n" \ | |
| "9:\n" \ | |
| ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \ | |
| ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \ | |
| : "=r"(__pu_err) \ | |
| : "r"(ptr), "r"(__val), "0"(__pu_err)); \ | |
| } while (0) | |
| #endif /* !defined(CONFIG_64BIT) */ | |
| /* | |
| * Complex access routines -- external declarations | |
| */ | |
| extern long strncpy_from_user(char *, const char __user *, long); | |
| extern unsigned lclear_user(void __user *, unsigned long); | |
| extern long lstrnlen_user(const char __user *, long); | |
| /* | |
| * Complex access routines -- macros | |
| */ | |
| #define user_addr_max() (~0UL) | |
| #define strnlen_user lstrnlen_user | |
| #define clear_user lclear_user | |
| #define __clear_user lclear_user | |
| unsigned long __must_check raw_copy_to_user(void __user *dst, const void *src, | |
| unsigned long len); | |
| unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src, | |
| unsigned long len); | |
| unsigned long __must_check raw_copy_in_user(void __user *dst, const void __user *src, | |
| unsigned long len); | |
| #define INLINE_COPY_TO_USER | |
| #define INLINE_COPY_FROM_USER | |
| struct pt_regs; | |
| int fixup_exception(struct pt_regs *regs); | |
| #endif /* __PARISC_UACCESS_H */ |