| # ALSA ISA drivers |
| |
| config SND_WSS_LIB |
| tristate |
| select SND_PCM |
| select SND_TIMER |
| |
| config SND_SB_COMMON |
| tristate |
| |
| config SND_SB8_DSP |
| tristate |
| select SND_PCM |
| select SND_SB_COMMON |
| |
| config SND_SB16_DSP |
| tristate |
| select SND_PCM |
| select SND_SB_COMMON |
| |
| menuconfig SND_ISA |
| bool "ISA sound devices" |
| depends on ISA || COMPILE_TEST |
| depends on ISA_DMA_API |
| default y |
| help |
| Support for sound devices connected via the ISA bus. |
| |
| if SND_ISA |
| |
| config SND_ADLIB |
| tristate "AdLib FM card" |
| select SND_OPL3_LIB |
| help |
| Say Y here to include support for AdLib FM cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-adlib. |
| |
| config SND_AD1816A |
| tristate "Analog Devices SoundPort AD1816A" |
| depends on PNP |
| select ISAPNP |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| select SND_TIMER |
| help |
| Say Y here to include support for Analog Devices SoundPort |
| AD1816A or compatible sound chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ad1816a. |
| |
| config SND_AD1848 |
| tristate "Generic AD1848/CS4248 driver" |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for AD1848 (Analog Devices) or |
| CS4248 (Cirrus Logic - Crystal Semiconductors) chips. |
| |
| For newer chips from Cirrus Logic, use the CS4231 or CS4232+ |
| drivers. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ad1848. |
| |
| config SND_ALS100 |
| tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx" |
| depends on PNP |
| select ISAPNP |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_SB16_DSP |
| help |
| Say Y here to include support for soundcards based on the |
| Diamond Technologies DT-019X or Avance Logic chips: ALS007, |
| ALS100, ALS110, ALS120 and ALS200 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-als100. |
| |
| config SND_AZT1605 |
| tristate "Aztech AZT1605 Driver" |
| depends on SND |
| select SND_WSS_LIB |
| select SND_MPU401_UART |
| select SND_OPL3_LIB |
| help |
| Say Y here to include support for Aztech Sound Galaxy cards |
| based on the AZT1605 chipset. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-azt1605. |
| |
| config SND_AZT2316 |
| tristate "Aztech AZT2316 Driver" |
| depends on SND |
| select SND_WSS_LIB |
| select SND_MPU401_UART |
| select SND_OPL3_LIB |
| help |
| Say Y here to include support for Aztech Sound Galaxy cards |
| based on the AZT2316 chipset. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-azt2316. |
| |
| config SND_AZT2320 |
| tristate "Aztech Systems AZT2320" |
| depends on PNP |
| select ISAPNP |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for soundcards based on the |
| Aztech Systems AZT2320 chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-azt2320. |
| |
| config SND_CMI8328 |
| tristate "C-Media CMI8328" |
| select SND_WSS_LIB |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| help |
| Say Y here to include support for soundcards based on the |
| C-Media CMI8328 chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cmi8328. |
| |
| config SND_CMI8330 |
| tristate "C-Media CMI8330" |
| select SND_WSS_LIB |
| select SND_SB16_DSP |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| help |
| Say Y here to include support for soundcards based on the |
| C-Media CMI8330 chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cmi8330. |
| |
| config SND_CS4231 |
| tristate "Generic Cirrus Logic CS4231 driver" |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for CS4231 chips from Cirrus |
| Logic - Crystal Semiconductors. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cs4231. |
| |
| config SND_CS4236 |
| tristate "Generic Cirrus Logic CS4232/CS4236+ driver" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y to include support for CS4232,CS4235,CS4236,CS4237B, |
| CS4238B,CS4239 chips from Cirrus Logic - Crystal |
| Semiconductors. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cs4236. |
| |
| config SND_ES1688 |
| tristate "Generic ESS ES688/ES1688 and ES968 PnP driver" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| help |
| Say Y here to include support for ESS AudioDrive ES688 or |
| ES1688 chips. Also, this module support cards with ES968 PnP chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-es1688. |
| |
| config SND_ES18XX |
| tristate "Generic ESS ES18xx driver" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| help |
| Say Y here to include support for ESS AudioDrive ES18xx chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-es18xx. |
| |
| config SND_SC6000 |
| tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16" |
| depends on HAS_IOPORT_MAP |
| select SND_WSS_LIB |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| help |
| Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000 |
| cards and clones: |
| Audio Excel DSP 16 and Zoltrix AV302. |
| |
| These cards are based on CompuMedia ASC-9308 or ASC-9408 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sc6000. |
| |
| config SND_GUSCLASSIC |
| tristate "Gravis UltraSound Classic" |
| select SND_RAWMIDI |
| select SND_PCM |
| select SND_TIMER |
| help |
| Say Y here to include support for Gravis UltraSound Classic |
| soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-gusclassic. |
| |
| config SND_GUSEXTREME |
| tristate "Gravis UltraSound Extreme" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| select SND_TIMER |
| help |
| Say Y here to include support for Gravis UltraSound Extreme |
| soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-gusextreme. |
| |
| config SND_GUSMAX |
| tristate "Gravis UltraSound MAX" |
| select SND_RAWMIDI |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for Gravis UltraSound MAX |
| soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-gusmax. |
| |
| config SND_INTERWAVE |
| tristate "AMD InterWave, Gravis UltraSound PnP" |
| depends on PNP |
| select SND_RAWMIDI |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for AMD InterWave based |
| soundcards (Gravis UltraSound Plug & Play, STB SoundRage32, |
| MED3210, Dynasonic Pro, Panasonic PCA761AW). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-interwave. |
| |
| config SND_INTERWAVE_STB |
| tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)" |
| depends on PNP |
| select SND_RAWMIDI |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for AMD InterWave based |
| soundcards with a TEA6330T bass and treble regulator |
| (UltraSound 32-Pro). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-interwave-stb. |
| |
| config SND_JAZZ16 |
| tristate "Media Vision Jazz16 card and compatibles" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_SB8_DSP |
| help |
| Say Y here to include support for soundcards based on the |
| Media Vision Jazz16 chipset: digital chip MVD1216 (Jazz16), |
| codec MVA416 (CS4216) and mixer MVA514 (ICS2514). |
| Media Vision's Jazz16 cards were sold under names Pro Sonic 16, |
| Premium 3-D and Pro 3-D. There were also OEMs cards with the |
| Jazz16 chipset. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-jazz16. |
| |
| config SND_OPL3SA2 |
| tristate "Yamaha OPL3-SA2/SA3" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3 |
| chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-opl3sa2. |
| |
| config SND_OPTI92X_AD1848 |
| tristate "OPTi 82C92x - AD1848" |
| select SND_OPL3_LIB |
| select SND_OPL4_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for soundcards based on Opti |
| 82C92x or OTI-601 chips and using an AD1848 codec. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-opti92x-ad1848. |
| |
| config SND_OPTI92X_CS4231 |
| tristate "OPTi 82C92x - CS4231" |
| select SND_OPL3_LIB |
| select SND_OPL4_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for soundcards based on Opti |
| 82C92x chips and using a CS4231 codec. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-opti92x-cs4231. |
| |
| config SND_OPTI93X |
| tristate "OPTi 82C93x" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for soundcards based on Opti |
| 82C93x chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-opti93x. |
| |
| config SND_MIRO |
| tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver" |
| select SND_OPL4_LIB |
| select SND_WSS_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro, |
| miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-miro. |
| |
| config SND_SB8 |
| tristate "Sound Blaster 1.0/2.0/Pro (8-bit)" |
| select SND_OPL3_LIB |
| select SND_RAWMIDI |
| select SND_SB8_DSP |
| help |
| Say Y here to include support for Creative Sound Blaster 1.0/ |
| 2.0/Pro (8-bit) or 100% compatible soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sb8. |
| |
| config SND_SB16 |
| tristate "Sound Blaster 16 (PnP)" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_SB16_DSP |
| help |
| Say Y here to include support for Sound Blaster 16 soundcards |
| (including the Plug and Play version). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sb16. |
| |
| config SND_SBAWE |
| tristate "Sound Blaster AWE (32,64) (PnP)" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_SB16_DSP |
| select SND_SEQ_DEVICE if SND_SEQUENCER != n |
| help |
| Say Y here to include support for Sound Blaster AWE soundcards |
| (including the Plug and Play version). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sbawe. |
| |
| # select SEQ stuff to min(SND_SEQUENCER,SND_XXX) |
| config SND_SBAWE_SEQ |
| def_tristate SND_SEQUENCER && SND_SBAWE |
| select SND_SEQ_MIDI_EMUL |
| select SND_SEQ_VIRMIDI |
| select SND_SYNTH_EMUX |
| |
| config SND_SB16_CSP |
| bool "Sound Blaster 16/AWE CSP support" |
| depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC) |
| select FW_LOADER |
| help |
| Say Y here to include support for the CSP core. This special |
| coprocessor can do variable tasks like various compression and |
| decompression algorithms. |
| |
| config SND_SSCAPE |
| tristate "Ensoniq SoundScape driver" |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| select FW_LOADER |
| help |
| Say Y here to include support for Ensoniq SoundScape |
| and Ensoniq OEM soundcards. |
| |
| The PCM audio is supported on SoundScape Classic, Elite, PnP |
| and VIVO cards. The supported OEM cards are SPEA Media FX and |
| Reveal SC-600. |
| The MIDI support is very experimental and requires binary |
| firmware files called "scope.cod" and "sndscape.co?" where the |
| ? is digit 0, 1, 2, 3 or 4. The firmware files can be found |
| in DOS or Windows driver packages. One has to put the firmware |
| files into the /lib/firmware directory. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sscape. |
| |
| config SND_WAVEFRONT |
| tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)" |
| select FW_LOADER |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_WSS_LIB |
| help |
| Say Y here to include support for Turtle Beach Maui, Tropez |
| and Tropez+ soundcards based on the Wavefront chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-wavefront. |
| |
| config SND_MSND_PINNACLE |
| tristate "Turtle Beach MultiSound Pinnacle/Fiji driver" |
| depends on X86 |
| select FW_LOADER |
| select SND_MPU401_UART |
| select SND_PCM |
| help |
| Say Y to include support for Turtle Beach MultiSound Pinnacle/ |
| Fiji soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-msnd-pinnacle. |
| |
| config SND_MSND_CLASSIC |
| tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" |
| depends on X86 |
| select FW_LOADER |
| select SND_MPU401_UART |
| select SND_PCM |
| help |
| Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or |
| Monterey (not for the Pinnacle or Fiji). |
| |
| See <file:Documentation/sound/oss/MultiSound> for important information |
| about this driver. Note that it has been discontinued, but the |
| Voyetra Turtle Beach knowledge base entry for it is still available |
| at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-msnd-classic. |
| |
| endif # SND_ISA |
| |
