| /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ | |
| /* | |
| * | |
| * This file is provided under a dual BSD/GPLv2 license. When using or | |
| * redistributing this file, you may do so under either license. | |
| * | |
| * GPL LICENSE SUMMARY | |
| * | |
| * Copyright(c) 2015 Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of version 2 of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * BSD LICENSE | |
| * | |
| * Copyright(c) 2015 Intel Corporation. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * - Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * - Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * - Neither the name of Intel Corporation nor the names of its | |
| * contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| */ | |
| #ifndef _LINUX__HFI1_IOCTL_H | |
| #define _LINUX__HFI1_IOCTL_H | |
| #include <linux/types.h> | |
| /* | |
| * This structure is passed to the driver to tell it where | |
| * user code buffers are, sizes, etc. The offsets and sizes of the | |
| * fields must remain unchanged, for binary compatibility. It can | |
| * be extended, if userversion is changed so user code can tell, if needed | |
| */ | |
| struct hfi1_user_info { | |
| /* | |
| * version of user software, to detect compatibility issues. | |
| * Should be set to HFI1_USER_SWVERSION. | |
| */ | |
| __u32 userversion; | |
| __u32 pad; | |
| /* | |
| * If two or more processes wish to share a context, each process | |
| * must set the subcontext_cnt and subcontext_id to the same | |
| * values. The only restriction on the subcontext_id is that | |
| * it be unique for a given node. | |
| */ | |
| __u16 subctxt_cnt; | |
| __u16 subctxt_id; | |
| /* 128bit UUID passed in by PSM. */ | |
| __u8 uuid[16]; | |
| }; | |
| struct hfi1_ctxt_info { | |
| __aligned_u64 runtime_flags; /* chip/drv runtime flags (HFI1_CAP_*) */ | |
| __u32 rcvegr_size; /* size of each eager buffer */ | |
| __u16 num_active; /* number of active units */ | |
| __u16 unit; /* unit (chip) assigned to caller */ | |
| __u16 ctxt; /* ctxt on unit assigned to caller */ | |
| __u16 subctxt; /* subctxt on unit assigned to caller */ | |
| __u16 rcvtids; /* number of Rcv TIDs for this context */ | |
| __u16 credits; /* number of PIO credits for this context */ | |
| __u16 numa_node; /* NUMA node of the assigned device */ | |
| __u16 rec_cpu; /* cpu # for affinity (0xffff if none) */ | |
| __u16 send_ctxt; /* send context in use by this user context */ | |
| __u16 egrtids; /* number of RcvArray entries for Eager Rcvs */ | |
| __u16 rcvhdrq_cnt; /* number of RcvHdrQ entries */ | |
| __u16 rcvhdrq_entsize; /* size (in bytes) for each RcvHdrQ entry */ | |
| __u16 sdma_ring_size; /* number of entries in SDMA request ring */ | |
| }; | |
| struct hfi1_tid_info { | |
| /* virtual address of first page in transfer */ | |
| __aligned_u64 vaddr; | |
| /* pointer to tid array. this array is big enough */ | |
| __aligned_u64 tidlist; | |
| /* number of tids programmed by this request */ | |
| __u32 tidcnt; | |
| /* length of transfer buffer programmed by this request */ | |
| __u32 length; | |
| }; | |
| /* | |
| * This structure is returned by the driver immediately after | |
| * open to get implementation-specific info, and info specific to this | |
| * instance. | |
| * | |
| * This struct must have explicit pad fields where type sizes | |
| * may result in different alignments between 32 and 64 bit | |
| * programs, since the 64 bit * bit kernel requires the user code | |
| * to have matching offsets | |
| */ | |
| struct hfi1_base_info { | |
| /* version of hardware, for feature checking. */ | |
| __u32 hw_version; | |
| /* version of software, for feature checking. */ | |
| __u32 sw_version; | |
| /* Job key */ | |
| __u16 jkey; | |
| __u16 padding1; | |
| /* | |
| * The special QP (queue pair) value that identifies PSM | |
| * protocol packet from standard IB packets. | |
| */ | |
| __u32 bthqp; | |
| /* PIO credit return address, */ | |
| __aligned_u64 sc_credits_addr; | |
| /* | |
| * Base address of write-only pio buffers for this process. | |
| * Each buffer has sendpio_credits*64 bytes. | |
| */ | |
| __aligned_u64 pio_bufbase_sop; | |
| /* | |
| * Base address of write-only pio buffers for this process. | |
| * Each buffer has sendpio_credits*64 bytes. | |
| */ | |
| __aligned_u64 pio_bufbase; | |
| /* address where receive buffer queue is mapped into */ | |
| __aligned_u64 rcvhdr_bufbase; | |
| /* base address of Eager receive buffers. */ | |
| __aligned_u64 rcvegr_bufbase; | |
| /* base address of SDMA completion ring */ | |
| __aligned_u64 sdma_comp_bufbase; | |
| /* | |
| * User register base for init code, not to be used directly by | |
| * protocol or applications. Always maps real chip register space. | |
| * the register addresses are: | |
| * ur_rcvhdrhead, ur_rcvhdrtail, ur_rcvegrhead, ur_rcvegrtail, | |
| * ur_rcvtidflow | |
| */ | |
| __aligned_u64 user_regbase; | |
| /* notification events */ | |
| __aligned_u64 events_bufbase; | |
| /* status page */ | |
| __aligned_u64 status_bufbase; | |
| /* rcvhdrtail update */ | |
| __aligned_u64 rcvhdrtail_base; | |
| /* | |
| * shared memory pages for subctxts if ctxt is shared; these cover | |
| * all the processes in the group sharing a single context. | |
| * all have enough space for the num_subcontexts value on this job. | |
| */ | |
| __aligned_u64 subctxt_uregbase; | |
| __aligned_u64 subctxt_rcvegrbuf; | |
| __aligned_u64 subctxt_rcvhdrbuf; | |
| }; | |
| #endif /* _LINIUX__HFI1_IOCTL_H */ |