| /* | |
| * PS3 Storage Library | |
| * | |
| * Copyright (C) 2007 Sony Computer Entertainment Inc. | |
| * Copyright 2007 Sony Corp. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published | |
| * by the Free Software Foundation; version 2 of the License. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. | |
| */ | |
| #include <linux/dma-mapping.h> | |
| #include <linux/module.h> | |
| #include <asm/lv1call.h> | |
| #include <asm/ps3stor.h> | |
| /* | |
| * A workaround for flash memory I/O errors when the internal hard disk | |
| * has not been formatted for OtherOS use. Delay disk close until flash | |
| * memory is closed. | |
| */ | |
| static struct ps3_flash_workaround { | |
| int flash_open; | |
| int disk_open; | |
| struct ps3_system_bus_device *disk_sbd; | |
| } ps3_flash_workaround; | |
| static int ps3stor_open_hv_device(struct ps3_system_bus_device *sbd) | |
| { | |
| int error = ps3_open_hv_device(sbd); | |
| if (error) | |
| return error; | |
| if (sbd->match_id == PS3_MATCH_ID_STOR_FLASH) | |
| ps3_flash_workaround.flash_open = 1; | |
| if (sbd->match_id == PS3_MATCH_ID_STOR_DISK) | |
| ps3_flash_workaround.disk_open = 1; | |
| return 0; | |
| } | |
| static int ps3stor_close_hv_device(struct ps3_system_bus_device *sbd) | |
| { | |
| int error; | |
| if (sbd->match_id == PS3_MATCH_ID_STOR_DISK | |
| && ps3_flash_workaround.disk_open | |
| && ps3_flash_workaround.flash_open) { | |
| ps3_flash_workaround.disk_sbd = sbd; | |
| return 0; | |
| } | |
| error = ps3_close_hv_device(sbd); | |
| if (error) | |
| return error; | |
| if (sbd->match_id == PS3_MATCH_ID_STOR_DISK) | |
| ps3_flash_workaround.disk_open = 0; | |
| if (sbd->match_id == PS3_MATCH_ID_STOR_FLASH) { | |
| ps3_flash_workaround.flash_open = 0; | |
| if (ps3_flash_workaround.disk_sbd) { | |
| ps3_close_hv_device(ps3_flash_workaround.disk_sbd); | |
| ps3_flash_workaround.disk_open = 0; | |
| ps3_flash_workaround.disk_sbd = NULL; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int ps3stor_probe_access(struct ps3_storage_device *dev) | |
| { | |
| int res, error; | |
| unsigned int i; | |
| unsigned long n; | |
| if (dev->sbd.match_id == PS3_MATCH_ID_STOR_ROM) { | |
| /* special case: CD-ROM is assumed always accessible */ | |
| dev->accessible_regions = 1; | |
| return 0; | |
| } | |
| error = -EPERM; | |
| for (i = 0; i < dev->num_regions; i++) { | |
| dev_dbg(&dev->sbd.core, | |
| "%s:%u: checking accessibility of region %u\n", | |
| __func__, __LINE__, i); | |
| dev->region_idx = i; | |
| res = ps3stor_read_write_sectors(dev, dev->bounce_lpar, 0, 1, | |
| 0); | |
| if (res) { | |
| dev_dbg(&dev->sbd.core, "%s:%u: read failed, " | |
| "region %u is not accessible\n", __func__, | |
| __LINE__, i); | |
| continue; | |
| } | |
| dev_dbg(&dev->sbd.core, "%s:%u: region %u is accessible\n", | |
| __func__, __LINE__, i); | |
| set_bit(i, &dev->accessible_regions); | |
| /* We can access at least one region */ | |
| error = 0; | |
| } | |
| if (error) | |
| return error; | |
| n = hweight_long(dev->accessible_regions); | |
| if (n > 1) | |
| dev_info(&dev->sbd.core, | |
| "%s:%u: %lu accessible regions found. Only the first " | |
| "one will be used\n", | |
| __func__, __LINE__, n); | |
| dev->region_idx = __ffs(dev->accessible_regions); | |
| dev_info(&dev->sbd.core, | |
| "First accessible region has index %u start %llu size %llu\n", | |
| dev->region_idx, dev->regions[dev->region_idx].start, | |
| dev->regions[dev->region_idx].size); | |
| return 0; | |
| } | |
| /** | |
| * ps3stor_setup - Setup a storage device before use | |
| * @dev: Pointer to a struct ps3_storage_device | |
| * @handler: Pointer to an interrupt handler | |
| * | |
| * Returns 0 for success, or an error code | |
| */ | |
| int ps3stor_setup(struct ps3_storage_device *dev, irq_handler_t handler) | |
| { | |
| int error, res, alignment; | |
| enum ps3_dma_page_size page_size; | |
| error = ps3stor_open_hv_device(&dev->sbd); | |
| if (error) { | |
| dev_err(&dev->sbd.core, | |
| "%s:%u: ps3_open_hv_device failed %d\n", __func__, | |
| __LINE__, error); | |
| goto fail; | |
| } | |
| error = ps3_sb_event_receive_port_setup(&dev->sbd, PS3_BINDING_CPU_ANY, | |
| &dev->irq); | |
| if (error) { | |
| dev_err(&dev->sbd.core, | |
| "%s:%u: ps3_sb_event_receive_port_setup failed %d\n", | |
| __func__, __LINE__, error); | |
| goto fail_close_device; | |
| } | |
| error = request_irq(dev->irq, handler, 0, | |
| dev->sbd.core.driver->name, dev); | |
| if (error) { | |
| dev_err(&dev->sbd.core, "%s:%u: request_irq failed %d\n", | |
| __func__, __LINE__, error); | |
| goto fail_sb_event_receive_port_destroy; | |
| } | |
| alignment = min(__ffs(dev->bounce_size), | |
| __ffs((unsigned long)dev->bounce_buf)); | |
| if (alignment < 12) { | |
| dev_err(&dev->sbd.core, | |
| "%s:%u: bounce buffer not aligned (%lx at 0x%p)\n", | |
| __func__, __LINE__, dev->bounce_size, dev->bounce_buf); | |
| error = -EINVAL; | |
| goto fail_free_irq; | |
| } else if (alignment < 16) | |
| page_size = PS3_DMA_4K; | |
| else | |
| page_size = PS3_DMA_64K; | |
| dev->sbd.d_region = &dev->dma_region; | |
| ps3_dma_region_init(&dev->sbd, &dev->dma_region, page_size, | |
| PS3_DMA_OTHER, dev->bounce_buf, dev->bounce_size); | |
| res = ps3_dma_region_create(&dev->dma_region); | |
| if (res) { | |
| dev_err(&dev->sbd.core, "%s:%u: cannot create DMA region\n", | |
| __func__, __LINE__); | |
| error = -ENOMEM; | |
| goto fail_free_irq; | |
| } | |
| dev->bounce_lpar = ps3_mm_phys_to_lpar(__pa(dev->bounce_buf)); | |
| dev->bounce_dma = dma_map_single(&dev->sbd.core, dev->bounce_buf, | |
| dev->bounce_size, DMA_BIDIRECTIONAL); | |
| if (!dev->bounce_dma) { | |
| dev_err(&dev->sbd.core, "%s:%u: map DMA region failed\n", | |
| __func__, __LINE__); | |
| error = -ENODEV; | |
| goto fail_free_dma; | |
| } | |
| error = ps3stor_probe_access(dev); | |
| if (error) { | |
| dev_err(&dev->sbd.core, "%s:%u: No accessible regions found\n", | |
| __func__, __LINE__); | |
| goto fail_unmap_dma; | |
| } | |
| return 0; | |
| fail_unmap_dma: | |
| dma_unmap_single(&dev->sbd.core, dev->bounce_dma, dev->bounce_size, | |
| DMA_BIDIRECTIONAL); | |
| fail_free_dma: | |
| ps3_dma_region_free(&dev->dma_region); | |
| fail_free_irq: | |
| free_irq(dev->irq, dev); | |
| fail_sb_event_receive_port_destroy: | |
| ps3_sb_event_receive_port_destroy(&dev->sbd, dev->irq); | |
| fail_close_device: | |
| ps3stor_close_hv_device(&dev->sbd); | |
| fail: | |
| return error; | |
| } | |
| EXPORT_SYMBOL_GPL(ps3stor_setup); | |
| /** | |
| * ps3stor_teardown - Tear down a storage device after use | |
| * @dev: Pointer to a struct ps3_storage_device | |
| */ | |
| void ps3stor_teardown(struct ps3_storage_device *dev) | |
| { | |
| int error; | |
| dma_unmap_single(&dev->sbd.core, dev->bounce_dma, dev->bounce_size, | |
| DMA_BIDIRECTIONAL); | |
| ps3_dma_region_free(&dev->dma_region); | |
| free_irq(dev->irq, dev); | |
| error = ps3_sb_event_receive_port_destroy(&dev->sbd, dev->irq); | |
| if (error) | |
| dev_err(&dev->sbd.core, | |
| "%s:%u: destroy event receive port failed %d\n", | |
| __func__, __LINE__, error); | |
| error = ps3stor_close_hv_device(&dev->sbd); | |
| if (error) | |
| dev_err(&dev->sbd.core, | |
| "%s:%u: ps3_close_hv_device failed %d\n", __func__, | |
| __LINE__, error); | |
| } | |
| EXPORT_SYMBOL_GPL(ps3stor_teardown); | |
| /** | |
| * ps3stor_read_write_sectors - read/write from/to a storage device | |
| * @dev: Pointer to a struct ps3_storage_device | |
| * @lpar: HV logical partition address | |
| * @start_sector: First sector to read/write | |
| * @sectors: Number of sectors to read/write | |
| * @write: Flag indicating write (non-zero) or read (zero) | |
| * | |
| * Returns 0 for success, -1 in case of failure to submit the command, or | |
| * an LV1 status value in case of other errors | |
| */ | |
| u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar, | |
| u64 start_sector, u64 sectors, int write) | |
| { | |
| unsigned int region_id = dev->regions[dev->region_idx].id; | |
| const char *op = write ? "write" : "read"; | |
| int res; | |
| dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n", | |
| __func__, __LINE__, op, sectors, start_sector); | |
| init_completion(&dev->done); | |
| res = write ? lv1_storage_write(dev->sbd.dev_id, region_id, | |
| start_sector, sectors, 0, lpar, | |
| &dev->tag) | |
| : lv1_storage_read(dev->sbd.dev_id, region_id, | |
| start_sector, sectors, 0, lpar, | |
| &dev->tag); | |
| if (res) { | |
| dev_dbg(&dev->sbd.core, "%s:%u: %s failed %d\n", __func__, | |
| __LINE__, op, res); | |
| return -1; | |
| } | |
| wait_for_completion(&dev->done); | |
| if (dev->lv1_status) { | |
| dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__, | |
| __LINE__, op, dev->lv1_status); | |
| return dev->lv1_status; | |
| } | |
| dev_dbg(&dev->sbd.core, "%s:%u: %s completed\n", __func__, __LINE__, | |
| op); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ps3stor_read_write_sectors); | |
| /** | |
| * ps3stor_send_command - send a device command to a storage device | |
| * @dev: Pointer to a struct ps3_storage_device | |
| * @cmd: Command number | |
| * @arg1: First command argument | |
| * @arg2: Second command argument | |
| * @arg3: Third command argument | |
| * @arg4: Fourth command argument | |
| * | |
| * Returns 0 for success, -1 in case of failure to submit the command, or | |
| * an LV1 status value in case of other errors | |
| */ | |
| u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, u64 arg1, | |
| u64 arg2, u64 arg3, u64 arg4) | |
| { | |
| int res; | |
| dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%llx\n", __func__, | |
| __LINE__, cmd); | |
| init_completion(&dev->done); | |
| res = lv1_storage_send_device_command(dev->sbd.dev_id, cmd, arg1, | |
| arg2, arg3, arg4, &dev->tag); | |
| if (res) { | |
| dev_err(&dev->sbd.core, | |
| "%s:%u: send_device_command 0x%llx failed %d\n", | |
| __func__, __LINE__, cmd, res); | |
| return -1; | |
| } | |
| wait_for_completion(&dev->done); | |
| if (dev->lv1_status) { | |
| dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx failed 0x%llx\n", | |
| __func__, __LINE__, cmd, dev->lv1_status); | |
| return dev->lv1_status; | |
| } | |
| dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx completed\n", __func__, | |
| __LINE__, cmd); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ps3stor_send_command); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("PS3 Storage Bus Library"); | |
| MODULE_AUTHOR("Sony Corporation"); |