| /* | |
| Broadcom B43 wireless driver | |
| LED control | |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, | |
| Copyright (c) 2005 Stefano Brivio <stefano.brivio@polimi.it> | |
| Copyright (c) 2005-2007 Michael Buesch <m@bues.ch> | |
| Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org> | |
| Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch> | |
| This program is free software; you can redistribute it and/or modify | |
| it under the terms of the GNU General Public License as published by | |
| the Free Software Foundation; either version 2 of the License, or | |
| (at your option) any later version. | |
| This program is distributed in the hope that it will be useful, | |
| but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| GNU General Public License for more details. | |
| You should have received a copy of the GNU General Public License | |
| along with this program; see the file COPYING. If not, write to | |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, | |
| Boston, MA 02110-1301, USA. | |
| */ | |
| #include "b43.h" | |
| #include "leds.h" | |
| #include "rfkill.h" | |
| static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index, | |
| bool activelow) | |
| { | |
| u16 ctl; | |
| ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); | |
| if (activelow) | |
| ctl &= ~(1 << led_index); | |
| else | |
| ctl |= (1 << led_index); | |
| b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); | |
| } | |
| static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index, | |
| bool activelow) | |
| { | |
| u16 ctl; | |
| ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL); | |
| if (activelow) | |
| ctl |= (1 << led_index); | |
| else | |
| ctl &= ~(1 << led_index); | |
| b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl); | |
| } | |
| static void b43_led_update(struct b43_wldev *dev, | |
| struct b43_led *led) | |
| { | |
| bool radio_enabled; | |
| bool turn_on; | |
| if (!led->wl) | |
| return; | |
| radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable); | |
| /* The led->state read is racy, but we don't care. In case we raced | |
| * with the brightness_set handler, we will be called again soon | |
| * to fixup our state. */ | |
| if (radio_enabled) | |
| turn_on = atomic_read(&led->state) != LED_OFF; | |
| else | |
| turn_on = false; | |
| if (turn_on == led->hw_state) | |
| return; | |
| led->hw_state = turn_on; | |
| if (turn_on) | |
| b43_led_turn_on(dev, led->index, led->activelow); | |
| else | |
| b43_led_turn_off(dev, led->index, led->activelow); | |
| } | |
| static void b43_leds_work(struct work_struct *work) | |
| { | |
| struct b43_leds *leds = container_of(work, struct b43_leds, work); | |
| struct b43_wl *wl = container_of(leds, struct b43_wl, leds); | |
| struct b43_wldev *dev; | |
| mutex_lock(&wl->mutex); | |
| dev = wl->current_dev; | |
| if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED)) | |
| goto out_unlock; | |
| b43_led_update(dev, &wl->leds.led_tx); | |
| b43_led_update(dev, &wl->leds.led_rx); | |
| b43_led_update(dev, &wl->leds.led_radio); | |
| b43_led_update(dev, &wl->leds.led_assoc); | |
| out_unlock: | |
| mutex_unlock(&wl->mutex); | |
| } | |
| /* Callback from the LED subsystem. */ | |
| static void b43_led_brightness_set(struct led_classdev *led_dev, | |
| enum led_brightness brightness) | |
| { | |
| struct b43_led *led = container_of(led_dev, struct b43_led, led_dev); | |
| struct b43_wl *wl = led->wl; | |
| if (likely(!wl->leds.stop)) { | |
| atomic_set(&led->state, brightness); | |
| ieee80211_queue_work(wl->hw, &wl->leds.work); | |
| } | |
| } | |
| static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, | |
| const char *name, const char *default_trigger, | |
| u8 led_index, bool activelow) | |
| { | |
| int err; | |
| if (led->wl) | |
| return -EEXIST; | |
| if (!default_trigger) | |
| return -EINVAL; | |
| led->wl = dev->wl; | |
| led->index = led_index; | |
| led->activelow = activelow; | |
| strncpy(led->name, name, sizeof(led->name)); | |
| atomic_set(&led->state, 0); | |
| led->led_dev.name = led->name; | |
| led->led_dev.default_trigger = default_trigger; | |
| led->led_dev.brightness_set = b43_led_brightness_set; | |
| err = led_classdev_register(dev->dev->dev, &led->led_dev); | |
| if (err) { | |
| b43warn(dev->wl, "LEDs: Failed to register %s\n", name); | |
| led->wl = NULL; | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void b43_unregister_led(struct b43_led *led) | |
| { | |
| if (!led->wl) | |
| return; | |
| led_classdev_unregister(&led->led_dev); | |
| led->wl = NULL; | |
| } | |
| static void b43_map_led(struct b43_wldev *dev, | |
| u8 led_index, | |
| enum b43_led_behaviour behaviour, | |
| bool activelow) | |
| { | |
| struct ieee80211_hw *hw = dev->wl->hw; | |
| char name[B43_LED_MAX_NAME_LEN + 1]; | |
| /* Map the b43 specific LED behaviour value to the | |
| * generic LED triggers. */ | |
| switch (behaviour) { | |
| case B43_LED_INACTIVE: | |
| case B43_LED_OFF: | |
| case B43_LED_ON: | |
| break; | |
| case B43_LED_ACTIVITY: | |
| case B43_LED_TRANSFER: | |
| case B43_LED_APTRANSFER: | |
| snprintf(name, sizeof(name), | |
| "b43-%s::tx", wiphy_name(hw->wiphy)); | |
| b43_register_led(dev, &dev->wl->leds.led_tx, name, | |
| ieee80211_get_tx_led_name(hw), | |
| led_index, activelow); | |
| snprintf(name, sizeof(name), | |
| "b43-%s::rx", wiphy_name(hw->wiphy)); | |
| b43_register_led(dev, &dev->wl->leds.led_rx, name, | |
| ieee80211_get_rx_led_name(hw), | |
| led_index, activelow); | |
| break; | |
| case B43_LED_RADIO_ALL: | |
| case B43_LED_RADIO_A: | |
| case B43_LED_RADIO_B: | |
| case B43_LED_MODE_BG: | |
| snprintf(name, sizeof(name), | |
| "b43-%s::radio", wiphy_name(hw->wiphy)); | |
| b43_register_led(dev, &dev->wl->leds.led_radio, name, | |
| ieee80211_get_radio_led_name(hw), | |
| led_index, activelow); | |
| break; | |
| case B43_LED_WEIRD: | |
| case B43_LED_ASSOC: | |
| snprintf(name, sizeof(name), | |
| "b43-%s::assoc", wiphy_name(hw->wiphy)); | |
| b43_register_led(dev, &dev->wl->leds.led_assoc, name, | |
| ieee80211_get_assoc_led_name(hw), | |
| led_index, activelow); | |
| break; | |
| default: | |
| b43warn(dev->wl, "LEDs: Unknown behaviour 0x%02X\n", | |
| behaviour); | |
| break; | |
| } | |
| } | |
| static void b43_led_get_sprominfo(struct b43_wldev *dev, | |
| unsigned int led_index, | |
| enum b43_led_behaviour *behaviour, | |
| bool *activelow) | |
| { | |
| u8 sprom[4]; | |
| sprom[0] = dev->dev->bus_sprom->gpio0; | |
| sprom[1] = dev->dev->bus_sprom->gpio1; | |
| sprom[2] = dev->dev->bus_sprom->gpio2; | |
| sprom[3] = dev->dev->bus_sprom->gpio3; | |
| if ((sprom[0] & sprom[1] & sprom[2] & sprom[3]) == 0xff) { | |
| /* There is no LED information in the SPROM | |
| * for this LED. Hardcode it here. */ | |
| *activelow = false; | |
| switch (led_index) { | |
| case 0: | |
| *behaviour = B43_LED_ACTIVITY; | |
| *activelow = true; | |
| if (dev->dev->board_vendor == PCI_VENDOR_ID_COMPAQ) | |
| *behaviour = B43_LED_RADIO_ALL; | |
| break; | |
| case 1: | |
| *behaviour = B43_LED_RADIO_B; | |
| if (dev->dev->board_vendor == PCI_VENDOR_ID_ASUSTEK) | |
| *behaviour = B43_LED_ASSOC; | |
| break; | |
| case 2: | |
| *behaviour = B43_LED_RADIO_A; | |
| break; | |
| case 3: | |
| *behaviour = B43_LED_OFF; | |
| break; | |
| default: | |
| *behaviour = B43_LED_OFF; | |
| B43_WARN_ON(1); | |
| return; | |
| } | |
| } else { | |
| /* keep LED disabled if no mapping is defined */ | |
| if (sprom[led_index] == 0xff) | |
| *behaviour = B43_LED_OFF; | |
| else | |
| *behaviour = sprom[led_index] & B43_LED_BEHAVIOUR; | |
| *activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW); | |
| } | |
| } | |
| void b43_leds_init(struct b43_wldev *dev) | |
| { | |
| struct b43_led *led; | |
| unsigned int i; | |
| enum b43_led_behaviour behaviour; | |
| bool activelow; | |
| /* Sync the RF-kill LED state (if we have one) with radio and switch states. */ | |
| led = &dev->wl->leds.led_radio; | |
| if (led->wl) { | |
| if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) { | |
| b43_led_turn_on(dev, led->index, led->activelow); | |
| led->hw_state = true; | |
| atomic_set(&led->state, 1); | |
| } else { | |
| b43_led_turn_off(dev, led->index, led->activelow); | |
| led->hw_state = false; | |
| atomic_set(&led->state, 0); | |
| } | |
| } | |
| /* Initialize TX/RX/ASSOC leds */ | |
| led = &dev->wl->leds.led_tx; | |
| if (led->wl) { | |
| b43_led_turn_off(dev, led->index, led->activelow); | |
| led->hw_state = false; | |
| atomic_set(&led->state, 0); | |
| } | |
| led = &dev->wl->leds.led_rx; | |
| if (led->wl) { | |
| b43_led_turn_off(dev, led->index, led->activelow); | |
| led->hw_state = false; | |
| atomic_set(&led->state, 0); | |
| } | |
| led = &dev->wl->leds.led_assoc; | |
| if (led->wl) { | |
| b43_led_turn_off(dev, led->index, led->activelow); | |
| led->hw_state = false; | |
| atomic_set(&led->state, 0); | |
| } | |
| /* Initialize other LED states. */ | |
| for (i = 0; i < B43_MAX_NR_LEDS; i++) { | |
| b43_led_get_sprominfo(dev, i, &behaviour, &activelow); | |
| switch (behaviour) { | |
| case B43_LED_OFF: | |
| b43_led_turn_off(dev, i, activelow); | |
| break; | |
| case B43_LED_ON: | |
| b43_led_turn_on(dev, i, activelow); | |
| break; | |
| default: | |
| /* Leave others as-is. */ | |
| break; | |
| } | |
| } | |
| dev->wl->leds.stop = 0; | |
| } | |
| void b43_leds_exit(struct b43_wldev *dev) | |
| { | |
| struct b43_leds *leds = &dev->wl->leds; | |
| b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow); | |
| b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow); | |
| b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow); | |
| b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow); | |
| } | |
| void b43_leds_stop(struct b43_wldev *dev) | |
| { | |
| struct b43_leds *leds = &dev->wl->leds; | |
| leds->stop = 1; | |
| cancel_work_sync(&leds->work); | |
| } | |
| void b43_leds_register(struct b43_wldev *dev) | |
| { | |
| unsigned int i; | |
| enum b43_led_behaviour behaviour; | |
| bool activelow; | |
| INIT_WORK(&dev->wl->leds.work, b43_leds_work); | |
| /* Register the LEDs to the LED subsystem. */ | |
| for (i = 0; i < B43_MAX_NR_LEDS; i++) { | |
| b43_led_get_sprominfo(dev, i, &behaviour, &activelow); | |
| b43_map_led(dev, i, behaviour, activelow); | |
| } | |
| } | |
| void b43_leds_unregister(struct b43_wl *wl) | |
| { | |
| struct b43_leds *leds = &wl->leds; | |
| b43_unregister_led(&leds->led_tx); | |
| b43_unregister_led(&leds->led_rx); | |
| b43_unregister_led(&leds->led_assoc); | |
| b43_unregister_led(&leds->led_radio); | |
| } |